Extraction and characterization of novel fibers from Tecoma stans Linn bark for use as reinforcement in polymer composites.

Embarking on a pioneering investigation, this study unravels the extraordinary qualities of Tecoma stans Fibers (TSFs), freshly harvested from the rachis, establishing them as prospective reinforcements for biocomposites. Delving into their intricate characteristics, TSFs exhibit a unique fusion of physical resilience, with a density of 1.81 ± 0.39 g/cc and a diameter of 234.12 ± 7.63 µm. Complementing their physical prowess, their chemical composition boasts a harmonious blend of cellulose (70.1 ± 9.06 wt%), hemicellulose (13.56 ± 4.29 wt%), lignin (7.62 ± 2.39 wt%), moisture (4.21 ± 1.56 wt%), wax (2.37 ± 0.63 wt%), and ash (1.25 ± 0.36 wt%). In the realm of mechanical strength, TSFs showcase an impressive tensile strength of 639 ± 18.47 MPa, coupled with a robust strain at failure of 1.75 ± 0.13 % and a Young Modulus of 36.51 ± 1.96 GPa. Unveiling their crystalline intricacies, these fibers reveal a microfibril angle of 14.66 ± 0.15°, a crystalline index (CI) of 63.83 %, and a crystallite size (CS) of 9.27 nm. Beyond their mechanical marvels, TSFs exhibit unwavering thermal stability, enduring temperatures up to 297.36 °C, with a Tmax reaching an impressive 392.09 °C.

Extraction of lignocellulosic fiber and cellulose microfibrils from agro waste-palmyra fruit peduncle: Water retting, chlorine-free chemical treatments, physio-chemical, morphological, and thermal characterization.

In this paper, lignocellulosic fibers and cellulose microfibrils (CMFs) were extracted from palmyra fruit peduncle waste and investigated as naturally derived cellulosic materials for their potential use as reinforcement materials in composite applications. The physicochemical, mechanical, and thermal properties of the extracted fiber were studied. Physical and morphological analysis results revealed an extracted fiber diameter of 82.5 µm with a very rough surface, providing excellent interfacial bonding performance with the polymer matrix. Chemical, mechanical, and thermal results showed that the fibers consist mainly of cellulose as their crystallized phase, with a cellulose content of 56.5 wt% and a tensile strength of 693.3 MPa, along with thermal stability up to 252 °C. The chemically extracted CMFs exhibit a short, rough-surfaced, cylindrical cellulose structure with a diameter range of 10-15 µm. These CMFs demonstrate excellent thermal stability, withstanding temperatures up to 330 °C. Furthermore, the formation of CMFs is evident from a substantial increase in the crystallinity index, which increased from 58.2 % in the raw fibers to 78.2 % in the CMFs. FT-IR analysis further confirms the successful removal of non-cellulosic materials through chlorine-free chemical treatments. These findings strongly support the potential use of extracted fibers and CMFs as reinforcement materials in polymers.

Production of hybrid AgNPs - TEMPO-mediated oxidation cellulose composite from jackfruit peduncle agro-waste and its thermal management application in electronic devices.

The urgent need for eco-friendly and cost-effective cellulose paper substrates in thermal management for biomedical electronic devices has driven the exploration of agro-waste materials. In this study, jackfruit peduncle waste was utilized as a precursor to produce a hybrid of AgNPs-tempo-mediated oxidation cellulose strands (AgNPs-TOCS) through acid hydrolysis, TEMPO oxidation, and an in-situ generation process. The resulting hybrid AgNPs-TOCS composite exhibited a cylindrical cellulose structure with a diameter of 27.3 µm, on which spherical AgNPs with a diameter of 16.3 nm were embedded. This hybrid AgNPs-TOCS displayed an impressive inhibition zone diameter against E. coli bacteria (15.2 nm) and exhibited excellent thermal stability up to 269 °C. Furthermore, the AgNPs-TOCS composite paper substrate was fabricated using non-solvent techniques, and its mechanical, thermal, and electrical properties were investigated. This composite paper substrate exhibits good tensile strength (65 ± 2 MPa), in-plane thermal conductivity (5.8 ± 0.2 W/(m·K)), and electrical resistivity (0.0575 KΩ·m). These findings strongly suggest that this type of composite paper substrate holds promise for applications in thermal management within the field of biomedical electronics.

Reuse of used paper egg carton boxes as a source to produce hybrid AgNPs- carboxyl nanocellulose through bio-synthesis and its application in active food packaging.

The proper disposal of disposable synthetic plastic food packaging materials presents a significant challenge for both the environment and the solid waste management community. To address this issue, an antibacterial-based high-strength bio-composite serves as the optimal alternative to conventional packaging materials. This study aims to produce a hybrid material of AgNPs-carboxyl cellulose nanocrystals (AgNPs-CCNCs), obtained from used egg carton boxes (UECBs), through bio acid hydrolysis and an in-situ generation process. Furthermore, AgNPs- carboxyl cellulose nanofibers (AgNPs-CCNFs) will be synthesized through a combination of bio acid hydrolysis and ball milling, followed by an additional in-situ generation step. The AgNPs-carboxyl nanocellulose (AgNPs-CCNCs, and AgNPs-CCNFs) exhibited excellent crystallinity index, morphology, thermal, and antibacterial properties. The morphological analysis was performed by electron microscopy, and the results showed the uniform distribution and spherical form of AgNPs appearing over the carboxyl nanocellulose through the in-situ generation process, which was confirmed through XRD analysis. The study further explores the impact of AgNPs-carboxyl nanocellulose on the mechanical, chemical, antibacterial, and thermal properties of the PVA matrix. The results demonstrate that the bio-nanocomposite film offers opportunities for utilization in active packaging applications.

Extraction and characterization of natural lignocellulosic fibres from Typha angustata grass.

In recent years, efforts have been made to reduce deforestation to conserve the ecosystem. In the current scenario, agro-cultivated products are used instead of wood for engineering applications. Thus, natural lignocellulosic fibres are used as a reinforcing material and have been extremely attractive to industries and the scientific community during the past few decades. This study aimed to examine the use of natural fibres extracted from Typha angustata grass as reinforcement in polymer matrix composites. The density of the fibres was 1.015 g/cc. Chemical analysis confirmed that T. angustata fibres (TAFs) have a cellulose content of 73.54 wt%, a hemicellulose content of 10.11 wt%, a lignin content of 6.23 wt% and a wax content of 0.23 wt%. The crystallinity index (65.16 %) and crystalline size (6.40 nm) were identified by X-ray diffraction (XRD) analysis. The presence of functional groups in the TAFs was examined by employing Fourier-transform infrared spectroscopy (FTIR). The presence of cellulose at peak intensities of C2, C3 and C5 in the TAFs was confirmed using 13C nuclear magnetic resonance (NMR) spectroscopy. The single fibre tensile test revealed that the tensile strength was 665 ± 7 MPa and Young's modulus was 27.45 ± 3.46 GPa. The thermal stability of the TAFs was examined by thermogravimetric analysis (TGA), and the prominent peak was observed at 298.48 °C, with a kinetic activation energy of 67.99 kJ/mol. The surface roughness of the fibres was analysed by atomic force microscopy (AFM) with an accuracy of 1 nm. The above-mentioned outcomes indicated that the TAFs have desirable properties that are comparable to existing natural fibres and suggested to be utilised as the possible reinforcement to fabricate the fibre-reinforced polymer matrix composites.

Preparation of bio-eco based cellulose nanomaterials from used disposal paper cups through citric acid hydrolysis.

The Used Disposal Paper Cups (UDPCs) have become a concern to the solid waste management sector as scientists triggered the problems in recent years, to proceed forward in developing the process for this issue. Based on this concern, the present study emphasizes on the isolation of a novel bio-eco based Cellulose NanoCrystals (CNCs) from UDPCs through citric acid hydrolysis. The effect of acid concentration on microstructure and yield of CNCs are highlighted. The optimized yield (55 wt.%) has an appearance of rod-like structure with a width of 13.7 ±â€¯0.6 nm which results due to 76 wt.% of acid hydrolyzed CNCs. The colloidal stability, crystallinity index, presence of functional groups and elemental composition in CNCs (76 wt.%) were identified by employing zeta potential, XRD, conductometric test and FTIR techniques. Finally, the thermal stability of CNCs (76 wt.%) was investigated by thermo-gravimetric analysis.

Effect of agro waste α-cellulosic micro filler on mechanical and thermal behavior of epoxy composites.

Of late, measures are being undertaken to curtail deforestation thereby to save the environment. In this venture, agro waste products are utilized for structural applications instead of wood. By this way, the α-cellulosic micro filler, which are isolated from Cocos nucifera var Aurantiaca Peduncle (CAP) through chemical treatment process, are systematically utilized as a reinforcing material in thermo set epoxy polymers as a replacement by manmade carbon, ceramic fillers and wood derived products. The results on mechanical properties such as tensile, flexural, impact test revealed that these properties of the α-cellulosic micro filler reinforced epoxy composites increased in linear nature for 3 wt% to 15 wt% of filler loading and 15 wt% shows the superior behaviour in their mechanical properties. The internal structure of the fractured mechanical test specimens are investigated through Field Emission Scanning Electron Microscopy (FE-SEM). In addition to that, visco-elastic behaviour, thermal stability of the 15 wt% of α-cellulosic micro filler reinforced epoxy composite were analyzed through dynamic mechanical and thermo gravimetric analysis and compare with pristine epoxy.

Extraction of cellulose nanofibers from cocos nucifera var aurantiaca peduncle by ball milling combined with chemical treatment.

The development of bio-degradable, renewable and low-cost material is critical to meet the growing environmental concerns and energy demands. The present study emphasizes on the extraction of a new kind of Cellulose NanoFibers (CNFs) from peduncles which are a bio-waste product of Cocos nucifera var-Aurantiaca through ball milling combined with chemical treatment. The crystallinity index, presence of functional groups and elemental composition in CNFs were identified by employing XRD, FT-IR and EDX techniques. The thermal stability of CNFs was investigated by thermo-gravimetric analysis. The morphological analysis was performed by electron microscopy and the results showed the appearance of CNFs in web-like structure with a width of 55-64 nm. The effect of reinforcement of CNFs in epoxy matrix was performed, whose tensile strength increased by 37% when 2 wt% of CNFs was loaded into the matrix.