RESUMEN
Femtosecond laser processing has been widely applied in glass processing owing to its ability to fabricate microscale components. To improve processing efficiency, a transient and selective laser (TSL) processing technique was previously developed, in which electron excitation was induced inside a transparent medium by a single pulse of femtosecond (fs) laser, and a single pulse of microsecond (µs) laser can be selectively absorbed in this excited region to heat and remove the material. However, because of its high speed removal process, the unclear mechanism and inefficient evaluation of its processing performance limit its further application. This study analyzes the transient spatiotemporal evolution of the induced plasma and the related material removal mechanism of the TSL processing using a side high-speed monitoring method. To achieve a rapid performance evaluation, a quantitative analysis of the optical plasma signals (on a microsecond timescale) generated in TSL processing was performed by employing a developed coaxial high-speed monitoring method using a photodetector. The variations in the shapes, intensity distribution, and dimensions of the plasma were quantitatively investigated. In addition, the relation between the plasma signal and drilling performance under different laser parameters, including hole depth, hole types, and cracks, was explored and quantitatively analyzed. The revealed mechanism is expected to contribute to the broadening of the application of TSL processing in microfabrication. Furthermore, the developed high-speed and precision monitoring technology can be utilized for high-speed evaluation and precision control of machining quality in real time during ultrahigh-speed laser machining, without time-consuming camera observations.
RESUMEN
Various liquid biopsy methods have been developed for the non-invasive and early detection of diseases. In particular, the detection of circulating tumor cells (CTCs) and cancer-associated fibroblasts (CAFs) in blood has been receiving a great deal of attention. We have been developing systems and materials to facilitate such liquid biopsies. In this study, we further developed glass filters (with various patterns of holes, pitches, and non-adhesive coating) that can capture CTCs, but not white blood cells. We optimized the glass filters to capture CTCs, and demonstrated that they could be used to detect CTCs from lung cancer patients. We also used the optimized glass filters for detecting CAFs. Additionally, we further developed a system for visualizing the captured cells on the glass filters. Finally, we demonstrated that we could directly culture the captured cells on the glass filters. Based on these results, our high-performance glass filters appear to be useful for capturing and culturing CTCs and CAFs for further examinations.
Asunto(s)
Fibroblastos Asociados al Cáncer , Neoplasias Pulmonares , Células Neoplásicas Circulantes , Humanos , Células Neoplásicas Circulantes/patología , Fibroblastos Asociados al Cáncer/patología , Línea Celular Tumoral , Neoplasias Pulmonares/diagnóstico , Neoplasias Pulmonares/patologíaRESUMEN
Microgroove processing of glass is important in many fields, however, it is difficult to achieve the processing with a high speed. In this study, we developed a novel method for the high-speed microgroove processing of glass using two types of lasers, namely a femtosecond laser and a near-infrared continuous-wave (CW) laser. A single femtosecond laser pulse was initially focused on the surface of the material, enabling the area to absorb the CW laser, which is otherwise not absorbed by the glass. The CW laser was then scanned along the material surface, expanding the machined hole to form a groove. The resulting grooves, with a width of approximately 10 µm and depths of up to 350 µm, can be machined with a scanning speed of up to 200 mm/s, 25 times faster than conventional methods. This method exhibits the potential to improve the industrial application of fast laser microprocessing of glass.
RESUMEN
The internal modification of glass using ultrashort pulse lasers has been attracting attention in a wide range of applications. However, the remarkably low processing speed has impeded its use in the industry. In this study, we achieved ultrafast internal modification of glass by coaxially focusing a single-pulse femtosecond laser and continuous-wave (CW) laser with the wavelength that is transparent to the glass. Compared with the conventional method, the processing speed increased by a factor of 500. The observation of high-speed phenomena revealed that the CW laser was absorbed by the seed electrons that were generated by the femtosecond laser pulse. This technique may help expand the applications of femtosecond lasers in the industry.