Crystallinity and Oscillatory Shear Rheology of Polyethylene Blends.

Crystallinity and rheological behavior are significant for processing semi-crystalline polymers with fine mechanical properties. There is always an economical need to create a less expensive new material with better properties. Non-isothermal crystallization and oscillatory shear rheology of different branch-type polyethylene-polyethylene blends were investigated. Samples of high-density and low-density polyethylene (HDPE/LDPE) (20/80, 40/60, 60/40 and 80/20 weight ratios) and two types of high-density and linear low-density polyethylene (HDPE/LLDPE) (40/60 and 60/40 weight ratios) were prepared via extrusion. The materials were tested by differential scanning calorimetry (DSC) at several cooling rates (5, 10, 20, 30 and 40°/min) and by oscillation rheometry (ARES G2) at low angular frequency range to prove their miscibility or immiscibility. It was found that the one-peak melting endotherm of the 80-20% HDPE-LDPE blend could indicate miscibility in the solid phase, while the other HDPE-LDPE blends with two-peak curves are partially or not miscible. In contrast, all the HDPE-LLDPE blends indicate co-crystallization, but the 40-60% HDPE-LLDPE butylene blend is probably immiscible. It was revealed that complex viscosity decreases with angular frequency: linearly for HD-LD blends and not linearly for HD-LLDPE blends. The complex viscosity shows linear behavior with composition for HD-LLDPE blends, while there is a positive-negative deviation for HD-LD blends. In the liquid phase, according to rheological measurements, the HDPE-LDPE blends are not or partially miscible, while the HDPE-LLDPE blends are probably miscible.

Rapid and sensitive detection of waterfowl mycoplasmas using TaqMan assays.

Waterfowl-specific mycoplasmas cause significant economic losses worldwide. However, only limited resources are available for the specific detection of three such bacteria, Mycoplasma anatis, M. anseris and M. cloacale. We developed species-specific TaqMan assays and tested their reliability across 20 strains of the respective target species as well as 84 non-target avian bacterial strains. Furthermore, we analysed 32 clinical DNA samples and compared the results with those of previously published conventional PCRs. The TaqMan assays showed 100% specificity and very high sensitivity, enabling the detection of target DNA as low as either 10 or 100 copies/µl concentration, depending on the assay. Importantly, we found that while the here developed TaqMan assays are reliable for species-specific detection of M. anatis, the previously published conventional PCR assay may give false positive results. In conclusion, the new assays are reliable, sensitive and suitable for clinical diagnostics of the target species.

Effect of Recycling on the Mechanical, Thermal and Rheological Properties of Polypropylene/Carbon Nanotube Composites.

In this research the effect of physical recycling on the mechanical, thermal, and rheological properties of polypropylene (PP)/multiwalled carbon nanotube (MWCNT) was investigated. After melt homogenization by extrusion, specimens were injection moulded with 0.1 and 0.5 wt% MWCNT content. The recycling process was simulated by multiple grinding and re-moulding, then we compared the behavior of original and recycled PP/MWCNT composites. Differential scanning calorimetry (DSC) measurements proved that MWCNT had double the effect on the morphology of the PP matrix: on the one hand nucleating effect can be detected because 0.5 wt% MWCNT increased the onset temperature of crystallization by 10 °C, compared to the basic PP material; on the other hand, the crystalline fraction of the recycled composite materials decreased compared to the original PP material with the same MWCNT content. This resulted in a slight decrease in strength and stiffness but an increase in elongation at break. However, compared to the original unreinforced PP reference, even the recycled materials have better properties. The mechanical test results showed that recycled PP/MWCNT 0.5 wt% increased the elastic modulus (~15%) and decreased the tensile strain at yield (~10%). However, in the values of tensile stress at yield, relevant difference was not found. It was also shown by oscillatory rheometry that MWCNT had a significant effect on the rheological properties (storage and loss modulus, complex viscosity) of PP compounds in a wide temperature range (190-230 °C).

Developing ovine mammary terminal duct lobular units have a dynamic mucosal and stromal immune microenvironment.

The human breast and ovine mammary gland undergo striking levels of postnatal development, leading to formation of terminal duct lobular units (TDLUs). Here we interrogate aspects of sheep TDLU growth as a model of breast development and to increase understanding of ovine mammogenesis. The distributions of epithelial nuclear Ki67 positivity differ significantly between younger and older lambs. Ki67 expression is polarised to the leading edge of the developing TDLUs. Intraepithelial ductal macrophages exhibit periodicity and considerably increased density in lambs approaching puberty. Stromal macrophages are more abundant centrally than peripherally. Intraepithelial T lymphocytes are more numerous in older lambs. Stromal hotspots of Ki67 expression colocalize with immune cell aggregates that exhibit distinct organisation consistent with tertiary lymphoid structures. The lamb mammary gland thus exhibits a dynamic mucosal and stromal immune microenvironment and constitutes a valuable model system that provides new insights into postnatal breast development.