RESUMEN
Inexpensive and safe energy-storage batteries with high energy densities are in high demand (e.g., for electric vehicles and grid-level renewable energy storage). This study focused on using NaFeCl4, comprising ubiquitous elements, as an electrode material for all-solid-state sodium-ion batteries. Monoclinic NaFeCl4, expected to be the most resource-attractive Fe redox material, is also thermodynamically stable. The Fe2+/3+ redox reaction of the monoclinic NaFeCl4 electrode has a higher potential (3.45 V vs. Na/Na+) than conventional oxide electrodes (e.g., Fe2O3 with 1.5 V vs. Na/Na+) because of the noble properties of chlorine. Additionally, NaFeCl4 exhibits unusually high deformability (99% of the relative density of the pellet) upon uniaxial pressing (382 MPa) at 298 K. NaFeCl4 operates at 333 K in an electrode system containing no electrolyte, thereby realizing next-generation all-solid-state batteries with high safety. A high energy density per positive electrode of 281 Wh kg-1 was achieved using only a simple powder press.
RESUMEN
Efforts to optimize known materials and enhance their performance are ongoing, driven by the advancements resulting from the discovery of novel functional materials. Traditionally, the search for and optimization of functional materials has relied on the experience and intuition of specialized researchers. However, materials informatics (MI), which integrates materials data and machine learning, has frequently been used to realize systematic and efficient materials exploration without depending on manual tasks. Nonetheless, the discovery of new materials using MI remains challenging. In this study, we propose a method for the discovery of materials outside the scope of existing databases by combining MI with the experience and intuition of researchers. Specifically, we designed a two-dimensional map that plots known materials data based on their composition and structure, facilitating researchers' intuitive search for new materials. The materials map was implemented using an autoencoder-based neural network. We focused on the conductivity of 708 lithium oxide materials and considered the correlation with migration energy (ME), an index of lithium-ion conductivity. The distribution of existing data reflected in the materials map can contribute to the development of new lithium-ion conductive materials by enhancing the experience and intuition of material researchers.
RESUMEN
Rechargeable batteries are essential to the global shift towards renewable energy sources and their storage. At present, improvements in their safety and sustainability are of great importance as part of global sustainable development goals. A major contender in this shift are rechargeable solid-state sodium batteries, as a low-cost, safe, and sustainable alternative to conventional lithium-ion batteries. Recently, solid-state electrolytes with a high ionic conductivity and low flammability have been developed. However, these still face challenges with the highly reactive sodium metal electrode. The study of these electrolyte-electrode interfaces is challenging from a computational and experimental point of view, but recent advances in molecular dynamics neural-network potentials are finally enabling access to these environments compared to more computationally expensive conventional ab-initio techniques. In this study, heteroatom-substituted Na3 PS3 X1 analogues, where X is sulfur, oxygen, selenium, tellurium, nitrogen, chlorine, and fluorine, are investigated using total-trajectory analysis and neural-network molecular dynamics. It was found that inductive electron-withdrawing and electron-donating effects, alongside differences in heteroatom atomic radius, electronegativity, and valency, influenced the electrolyte reactivity. The Na3 PS3 O1 oxygen analogue was found to have superior chemical stability against the sodium metal electrode, paving the way towards high-performance, long lifetime and reliable rechargeable solid-state sodium batteries.
RESUMEN
Magnesium rechargeable batteries (MRBs) promise to be the next post lithium-ion batteries that can help meet the increasing demand for high-energy, cost-effective, high-safety energy storage devices. Early prototype MRBs that use molybdenum-sulfide cathodes have low terminal voltages, requiring the development of oxide-based cathodes capable of overcoming the sulfide's low Mg2+ conductivity. Here, we fabricate an ultraporous (>500 m2 g-1) and ultrasmall (<2.5 nm) cubic spinel MgMn2O4 (MMO) by a freeze-dry assisted room-temperature alcohol reduction process. While the as-fabricated MMO exhibits a discharge capacity of 160 mAh g-1, the removal of its surface hydroxy groups by heat-treatment activates it without structural change, improving its discharge capacity to 270 mAh g-1âthe theoretical capacity at room temperature. These results are made possible by the ultraporous, ultrasmall particles that stabilize the metastable cubic spinel phase, promoting both the Mg2+ insertion/deintercalation in the MMO and the reversible transformation between the cubic spinel and cubic rock-salt phases.
RESUMEN
NASICON-type LiZr2(PO4)3 (LZP) has attracted significant attention as a solid oxide electrolyte for all-solid-state Li-ion or Li-metal batteries owing to its high Li-ion conductivity, usability in all-solid-state batteries, and electrochemical stability against Li metal. In this study, we aim to improve the Li-ion conductivity of Li-rich NASICON-type LZPs doped with CaO and SiO2, i.e., Li1+x+2y Ca y Zr2-y Si x P3-x O12(0 ≤ x ≤ 0.3, 0 ≤ y ≤ 0.3) (LCZSP). Herein, a total of 49 compositions were synthesised, and their crystal structures, relative densities, and Li-ion conductivities were characterised experimentally. We confirmed the improvement in Li-ion conductivity by simultaneous replacement of Zr and P sites with Ca and Si ions, respectively. However, the intuition-derived determination of the composition exhibiting the highest Li-ion conductivity is technically difficult because the compositional dependence of the relative density and the crystalline phase of the sample is very complex. Bayesian optimisation (BO) was performed to efficiently discover the optimal composition that exhibited the highest Li-ion conductivity among the samples evaluated experimentally. We also optimised the composition of the LCZSP using multi-task Gaussian process regression after transferring prior knowledge of 47 compositions of Li1+x+2y Y x Ca y Zr2-x-y P3O12 (0 ≤ x ≤ 0.376, 0 ≤ y ≤ 0.376) (LYCZP), i.e., BO with transfer learning. The present study successfully demonstrated that BO with transfer learning can search for optimal compositions two times as rapid as the conventional BO approach. This approach can be widely applicable for the optimisation of various functional materials as well as ionic conductors.
RESUMEN
Li-metal rechargeable batteries are an attractive option for devices that require an extremely high specific energy density, high robustness, and long-term durability, such as high-altitude platform stations. However, Li dendrite growth during charge-discharge cycling causes short-circuit problems. One technical solution is to form an intermediate layer between the Li metal and electrolyte. This interfacial layer should possess mechanical strength, electrochemical stability in the presence of Li, and Li-ion conductivity. In this study, the Li-ion conductivity of spinel-type LiAl5O8 was investigated using first-principles density functional theory and force field molecular dynamics calculations. The calculation results confirmed that stoichiometric LiAl5O8 compounds do not exhibit Li-ion conductivity, whereas off-stoichiometric compounds with excess Li show long-range Li-ion diffusion. The evaluated activation energy was 0.28 eV, which is as low as that of well-known fast Li-ion conductors, such as garnet-type Li7La3Zr2O12. However, the extrapolated Li-ion conductivity at 298 K was relatively low (~ 10-6 S/cm) owing to the limited formation of migration pathways.
RESUMEN
All-solid-state Li-ion batteries are of considerable interest as safer alternatives to Li-ion batteries containing flammable organic electrolytes. To date, however, achieving sufficient charging and discharging rates, in addition to capacity, at room temperature using these all-solid-state batteries has been challenging. To overcome these issues, material simulations and informatics investigations of a relatively new Na superionic conductor (NASICON)-type LiZr2(PO4)3 (LZP) electrolyte were conducted to elucidate its characteristics and material functions. The following thermodynamic and/or kinetic properties of NASICON-type Li-ion conductive oxides were investigated with respect to the crystal structure mainly using material simulation and informatics approaches: (1) the electrochemical stabilities of LZP materials with respect to Li metal and (2) Li-ion conductivities in the bulk and at the grain boundaries. An efficient materials informatics search method was employed to optimise the material functions of the LZP electrolyte via Bayesian optimisation. This study should promote the application of LZP in all-solid-state batteries for use in technologies such as mobile devices and electric vehicles and enable more complex composition and process control.
RESUMEN
Dependence on lithium-ion batteries for automobile applications is rapidly increasing. The emerging use of anionic redox can boost the energy density of batteries, but the fundamental origin of anionic redox is still under debate. Moreover, to realize anionic redox, many reported electrode materials rely on manganese ions through π-type interactions with oxygen. Here, through a systematic experimental and theoretical study on a binary system of Li3NbO4-NiO, we demonstrate for the first time the unexpectedly large contribution of oxygen to charge compensation for electrochemical oxidation in Ni-based materials. In general, for Ni-based materials, e.g., LiNiO2, charge compensation is achieved mainly by Ni oxidation, with a lower contribution from oxygen. In contrast, for Li3NbO4-NiO, oxygen-based charge compensation is triggered by structural disordering and σ-type interactions with nickel ions, which are associated with a unique environment for oxygen, i.e., a linear Ni-O-Ni configuration in the disordered system. Reversible anionic redox with a small hysteretic behavior was achieved for LiNi2/3Nb1/3O2 with a cation-disordered Li/Ni arrangement. Further Li enrichment in the structure destabilizes anionic redox and leads to irreversible oxygen loss due to the disappearance of the linear Ni-O-Ni configuration and the formation of unstable Ni ions with high oxidation states. On the basis of these results, we discuss the possibility of using σ-type interactions for anionic redox to design advanced electrode materials for high-energy lithium-ion batteries.
RESUMEN
Development of metal-anode rechargeable batteries is a challenging issue. Especially, magnesium rechargeable batteries are promising in that Mg metal can be free from dendrite formation upon charging. However, in case of oxide cathode materials, inserted magnesium tends to form MgO-like rocksalt clusters in a parent phase even with another structure, which causes poor cyclability. Here, a design concept of high-performance cathode materials is shown, based on: i) selecting an element to destabilize the rocksalt-type structure and ii) utilizing the defect-spinel-type structure both to avoid the spinel-to-rocksalt reaction and to secure the migration path of Mg cations. This theoretical and experimental work substantiates that a defect-spinel-type ZnMnO3 meets the above criteria and shows excellent cycle performance exceeding 100 cycles upon Mg insertion/extraction with high potential (≈2.5 V vs Mg2+ /Mg) and capacity (≈100 mAh g-1 ). Thus, this work would provide a design guideline of cathode materials for various multivalent rechargeable batteries.
RESUMEN
We report the successful synthesis, crystal structure, and electrical properties of Sr3Re2O9, which contains Re6+ with the 5d1 configuration. This compound is isostructural with Ba3Re2O9 and shows a first-order structural phase transition at â¼370 K. The low-temperature (LT) phase crystallizes in a hettotype structure of Ba3Re2O9, which is different from that of the LT phase of Sr3W2O9, suggesting that the electronic state of Re6+ plays an important role in determining the crystal structure of the LT phase. The structural transition is accompanied by a sharp change in the electrical resistivity. This is likely a metal-insulator transition, as suggested by the electronic band calculation and magnetic susceptibility. In the LT phase, the ReO6 octahedra are rotated in a pseudo-a0a0a+ manner in Glazer notation, which corresponds to C-type orbital ordering. Paramagnetic dipole moments were confirmed to exist in the LT phase by muon spin rotation and relaxation measurements. However, the dipole moments shrink greatly because of the strong spin-orbit coupling in the Re ions. Thus, the electronic state of the LT phase corresponds to a Mott insulating state with strong spin-orbit interactions at the Re sites.
RESUMEN
Solid electrolytes with high Mg-ion conductivity are required to develop solid-state Mg-ion batteries. The migration energies of the Mg2+ ions of 5,576 Mg compounds tabulated from the inorganic crystal structure database (ICSD) were evaluated via high-throughput calculations. Among the computational results, we focused on the Mg2+ ion diffusion in Mg0.6Al1.2 Si1.8O6, as this material showed a relatively low migration energy for Mg2+ and was composed solely of ubiquitous elements. Furthermore, first-principles molecular dynamics calculations confirmed a single-phase Mg2+ ion conductor. The bulk material with a single Mg0.6Al1.2Si1.8O6 phase was successfully prepared using the sol-gel method. The relative density of the sample was 81%. AC impedance measurements indicated an electrical conductivity of 1.6 × 10-6 Scm-1 at 500°C. The activation energy was 1.32 eV, which is comparable to that of monoclinic-type Mg0.5Zr2(PO4)3.
RESUMEN
Efficient and large-scale removal of humic acid (HA) from aqueous environments is required since HA causes human health and esthetic issues. Hydro-garnet compounds, Ca3Al2(SiO4)3-x (OH)4x , have recently been suggested as HA adsorbents not only due to their superior adsorption behaviors but also because they are ubiquitous element-derived compounds. In this study, the adsorption behavior of formic acid to hydro-garnets was investigated by means of first-principles density functional theory (DFT) computations. Formic acid was chosen owing to its reasonable computational cost and inclusion of carboxylic acid as HA. Comparisons of adsorption energies for formic acid among various compounds (including platinum and kaolinite) indicate that hydro-garnet compounds are promising due to their lower (more stable) adsorption energies. Also, the optimization of composition x enables selective adsorption of formic acid against solvent water molecules. Relationships between surface electronic/atomistic structures and adsorption properties are discussed.
RESUMEN
Dielectric materials that can realize downsizing and higher performance in electric devices are in demand. Perovskite-type materials of the form ABO3 are potential candidates. However, because of the numerous conceivable compositions of perovskite-type oxides, finding the best composition is technically difficult. To obtain a reasonable guideline for material design, we aim to clarify the relationship between the dielectric constants and other physical and chemical properties of perovskite-type oxides using first-principles density functional theory (DFT) and partial least-squares regression analysis. The more important factors affecting the dielectric constants are predicted based on variable importance in projection (VIP) scores. The dielectric constant strongly correlates with the ionicity of the B cations and the density of states of the conduction bands of the B cations.
RESUMEN
Li metal electrode is the ultimate choice use in Li ion batteries as high-energy storage systems. An obstacle to its practical realization is Li dendrite formation. In this study, the desolvation resistance of the Li metal electrode, which is strongly related to the inhibition of Li dendrite formation, is investigated. By applying a Laplace transform impedance technique, the desolvation/solvation resistances were successfully separated and analyzed in cells using liquid electrolytes containing different lithium salts, revealing asymmetry in the desolvation/solvation resistances of Li metal electrodes. The desolvation resistances, which supposedly require large amounts of energy derived from the strong interaction between Li+ ion and solvents, were smaller than the solvation resistances. It has also been revealed that the larger resistance in the desolvation process is effective for suppressing Li dendrite formation further.
RESUMEN
Research has recently been focused on high-performance next-generation batteries to replace secondary batteries due to capacity limitations and safety concerns. The Mg secondary battery is one candidate to realize high energy density storage batteries for practical applications. Ni and Co typically exhibit desirable electrochemical characteristics; therefore, we have attempted to synthesize new rock-salt compositions, Mg xNi yCo zO2 ( x + y + z ≤ 2.0), as cathode materials for Mg rechargeable batteries, and investigated their crystal structures and electrochemical characteristics. The materials were synthesized by the reverse coprecipitation method. Powder X-ray diffraction and transmission electron microscopy analyses showed the obtained samples were a single phase of the rock-salt structure with the space group Fm3Ì m. The vacancies at the metal sites were estimated by Rietveld analysis to determine the new chemical composition of Mg xNi yCo zâ¡2- x- y- zO2 (0.41 < x < 0.64, 0.82 < y < 1.23, 0.24 < z < 0.61). Charge-discharge tests indicated the discharge characteristics varied according to the Mg composition and the Ni/Co ratio. The Co and Mg compositions were considered to facilitate the insertion/deinsertion of Mg2+. The present new material has the potential to be a superior cathode material for Mg secondary batteries by first-principles calculations.
RESUMEN
[This corrects the article DOI: 10.1098/rsos.172023.].
RESUMEN
Solid electrolyte materials exhibiting high Mg-ion conductivity are required to develop Mg-ion batteries. In this study, we focused on a Mg-ion-conducting solid phosphate based electrolyte, MgZr4(PO4)6 (MZP), and evaluated the ionic conductivity of NASICON-type and ß-iron sulfate-type MgZr4(PO4)6 structures via density functional theory calculations. The calculations suggest that the migration energy of Mg is 0.63 eV for the NASICON-type structure and 0.71 eV for the ß-iron sulfate-type one, and the NASICON-type structure has higher ion conductivity. Although the NASICON-type MZP structure has not been experimentally realised, there is only an energy difference of 14 meV per atom with respect to that of the ß-iron sulfate-type structure. Therefore, in order to develop a synthesis method for the NASICON-type structure, we investigated pressure- and temperature-dependent variations in the free energy of formation using density functional perturbation theory calculations. The results suggest that the formation of the NASICON-type structure is disfavoured under the 0-2000 K and 0-20 GPa conditions.
RESUMEN
A polar LiNbO3 (LN)-type oxide LiSbO3 was synthesized by a high-temperature heat treatment under a pressure of 7.7 GPa and found to exhibit ferroelectricity. The crystal structural refinement using the data of synchrotron powder X-ray diffraction and neutron diffraction and the electronic structure calculation of LN-type LiSbO3 suggest a covalent-bonding character between Sb and O. When comparing the distortion of BO6 in LN-type ABO3, the distortions of SbO6 in LiSbO3 and SnO6 in ZnSnO3, which included a B cation with a d10 electronic configuration, were smaller than those of BO6 in LN-type oxides having the second-order Jahn-Teller active B cation, e.g., LiNbO3 and ZnTiO3. The temperature dependence of the lattice parameters, second harmonic generation, dielectric permittivity, and differential scanning calorimetry made it clear that a second-order ferroelectric-paraelectric phase transition occurs at a Curie temperature of Tc = 605 ± 10 K in LN-type LiSbO3. Further, first-principles density functional theory calculation suggested that perovskite-type LiSbO3 is less stable than LN-type LiSbO3 under even high pressure, and the ambient phase of LiSbO3 directly transforms to LN-type LiSbO3 under high pressure. The phase stability of LN-type LiSbO3 and the polar and ferroelectric properties are rationalized by the covalent bonding of Sb-O and the relatively weak Coulomb repulsion between Li+ and Sb5+.
RESUMEN
Sodium ion batteries meet the demand for large-scale energy storage, such as in electric vehicles, due to the material abundance of sodium. In this report, nanotube-type Na2V3O7 is proposed as a cathode material because of its fast sodium diffusivity, an important requirement for sodium ion batteries, through the investigation of ~4300 candidates via a high-throughput computation. High-rate performance was confirmed, showing ~65% capacity retention at a current density of 10C at room temperature, despite the large particle size of >5 µm. A good cycle performance of ca. 94% in capacity retention after 50 cycles was obtained owing to a small volumetric change of <0.4%.
RESUMEN
Increasing attention has been paid to materials informatics approaches that promise efficient and fast discovery and optimization of functional inorganic materials. Technical breakthrough is urgently requested to advance this field and efforts have been made in the development of materials descriptors to encode or represent characteristics of crystalline solids, such as chemical composition, crystal structure, electronic structure, etc. We propose a general representation scheme for crystalline solids that lifts restrictions on atom ordering, cell periodicity, and system cell size based on structural descriptors of directly binned Voronoi-tessellation real feature values and atomic/chemical descriptors based on the electronegativity of elements in the crystal. Comparison was made vs. radial distribution function (RDF) feature vector, in terms of predictive accuracy on density functional theory (DFT) material properties: cohesive energy (CE), density (d), electronic band gap (BG), and decomposition energy (Ed). It was confirmed that the proposed feature vector from Voronoi real value binning generally outperforms the RDF-based one for the prediction of aforementioned properties. Together with electronegativity-based features, Voronoi-tessellation features from a given crystal structure that are derived from second-nearest neighbor information contribute significantly towards prediction.