Modeling and investigation of swelling kinetics of sodium carboxymethyl cellulose/starch/citric acid superabsorbent polymer.

Crosslinked hydrophilic polymers with high water absorption rates are known as superabsorbent polymers (SAPs). Most commercial superabsorbent polymers are made with acrylic acid, which is difficult to biodegrade. So, in this investigation, carboxymethyl cellulose (CMC) was utilized as a significant component in the synthesis of polysaccharide-based SAPs. Citric acid (CA) and starch were chosen as crosslinking agents because they are more eco-friendly, non-toxic, and biodegradable than traditional crosslinking agents. FTIR analysis revealed that the superabsorbent polymer product contains a crosslinked structure of CMC and starch with side chains that carry carboxylate functional groups. Superabsorbent weight loss and grafting data were satisfactorily studied using the TGA approach. Under optimum circumstances, the SAP2 water absorbency capacity in distilled water was 287.37 g.g-1 and SAP1 absorbency capacity in a solution containing 0.9 wt% NaCl was 52.18 g.g-1. Moreover, Schott's pseudo-second-order model was used to determine the kinetic swelling of the superabsorbent. The initial swelling rate of SAPs can be calculated using the Q∞ data acquired in the following order: SAP2 > SAP1 > SAP3 > SAP4 in distilled water and SAP1 > SAP2 > SAP3 > SAP4 in 0.9 wt% NaCl solution, respectively. The findings suggested that a small amount of citric acid introduced into the SAPs matrix could enhance the swelling rate of SAPs. The results of the cytotoxicity tests show that the extraction liquid of composite hydrogel fibers is less cytotoxic than the positive control. As well, SAP underwent in silico docking investigations on the DNA Gyrase enzyme. As the ligand is a monomer of SAP, it was a long chain of carbohydrate molecules with alcoholic groups, esters groups, and keto groups forms a strong binding interaction with DNA gyrase.

A Comparative Study of Gamma-Ray Irradiation-Induced Oxidation: Polyethylene, Poly (Vinylidene Fluoride), and Polytetrafluoroethylene.

Radiation techniques are used to modify the physical, chemical and biological properties of polymers. This induces crosslinking and degradation reactions of polymers by utilizing radicals generated through ionizing radiation. However, oxidation products (such as carbonyl) can be formed because oxidation occurs by chain scission in the presence of oxygen. Herein, we demonstrate the gamma-ray irradiation-induced oxidation with and without fluorine using polyethylene, polyvinylidene fluoride and polytetrafluoroethylene under the same conditions. In this study, changes in element-content and chemical-bond structures were analyzed before and after gamma-ray irradiation under air atmosphere. As a result, polytetrafluo-roethylene showed less oxidation and excellent thermal properties after the absorbed dose of 500 kGy. This can be attributed to the generation of stable perfluoroalkylperoxy radicals after gamma ray irradiation in the PTFE structure containing only CF2 groups, thereby hindering the oxidation reaction.

Preliminary Study on the Simulation of a Radiation Damage Analysis of Biodegradable Polymers.

In this study, biodegradable poly(L-lactide-co-ε-caprolactone) (PLCL) and poly(L-co-d,l lactide) (PLDLA) were evaluated using Geant4 (G4EmStandardPhysics_option4) for damage simulation, in order to predict the safety of these biodegradable polymers against gamma ray sterilization. In the PLCL damage model, both chain scission and crosslinking reactions appear to occur at a radiation dose in the range 0-200 kGy, but the chain cleavage reaction is expected to be relatively dominant at high irradiation doses above 500 kGy. On the other hand, the PLDLA damage model predicted that the chain cleavage reaction would prevail at the total irradiation dose (25-500 kGy). To verify the simulation results, the physicochemical changes in the irradiated PLCL and PLDLA films were characterized by GPC (gel permeation chromatography), ATR-FTIR (attenuated total reflection Fourier transform infrared), and DSC (difference scanning calorimetry) analyses. The Geant4 simulation curve for the radiation-induced damage to the molecular weight was consistent with the experimentally obtained results. These results imply that the pre-simulation study can be useful for predicting the optimal irradiation dose and ensuring material safety, particularly for implanted biodegradable materials in radiation processing.

Site-Specific Lipidation of a Small-Sized Protein Binder Enhances the Antitumor Activity through Extended Blood Half-Life.

Protein and peptide therapeutics tend to have a short blood circulation time mainly caused by rapid clearance in kidney, leading to a low therapeutic efficacy. Here, we demonstrate that the antitumor activity of a small-sized protein binder can be significantly enhanced by prolonged blood half-life through site-specific lipidation. An unnatural amino acid was genetically incorporated into a specific site with the highest accessibility in a human interleukin-6 (IL-6)-targeting protein binder with a size of 30.8 kDa, followed by conjugation with palmitic acid using cooper-free click chemistry. The resulting protein binder was shown to have a binding capacity for serum albumin, maintaining a comparable binding affinity for human IL-6 to the native protein binder. The terminal half-life of the lipidated protein binder was estimated to be 10.7 h, whereas the native one had a half-life of 20 min, resulting in a significantly enhanced tumor suppression effect. The present approach can be generally applied to small-sized therapeutic proteins for the elongation of circulation time and increase of bioavailability in blood, consequently enhancing their therapeutic efficacy.

Efficient and Site-Specific 125I-Radioiodination of Bioactive Molecules Using Oxidative Condensation Reaction.

In this report, the novel and site-specific radioiodination of biomolecules by using aryl diamine and alkyl aldehyde condensation reaction in the presence of a Cu2+ catalyst under ambient conditions was reported. 125I-labeled alkyl aldehyde was synthesized using a tin precursor with a high radiochemical yield (72 ± 6%, n = 5) and radiochemical purity (>99%). The utility of the radioiodinated precursor was demonstrated through aryl diamine-installed c[RGDfK(C)] peptide and human serum albumin (HSA). Radioiodinated c[RGDfK(C)] peptide and HSA protein were synthesized with high radiochemical yields and purity. 125I-HSA protein showed excellent in vivo stability and negligible thyroid uptake as compared with directly radioiodinated HSA by using the tyrosine group. Excellent reaction kinetics and the in vitro and in vivo stabilities of 125I-labeled alkyl aldehyde have suggested the usefulness of the strategy for the radioiodination of bioactive molecules.

Gamma-irradiated black ginseng extract inhibits mast cell degranulation and suppresses atopic dermatitis-like skin lesions in mice.

Gamma irradiation is able to affect various structural modification and an increase of the biological properties of biomaterials. This study was conducted to investigate the anti-allergenic effect of γ-irradiated black ginseng extract (BGE) using in vitro and in vivo experiments. IgEantigen complex-induced degranulation was measured in RBL-2H3 mast cells. In addition, an anti-atopic dermatitis (AD) test was carried out by spreading γ-irradiated BGE on the dorsal skin of 2,4-dinitrochlorobenzene (DNCB)-induced BALB/c mice. The content of arginylfructose (AF) of gamma-irradiated BGE was higher than that of BGE. In RBL-2H3 mast cells, γ-irradiated BGE treatments significantly reduced the IgE-antigen complex-induced release of ß-hexosaminidase, histamine, intracellular ROS, and Ca2+ influx. A western blot analysis showed that γ-irradiated BGE had an inhibitory activity on the FcεRI-mediated signaling in mast cells. In the DNCB-induced AD model, γ-irradiated BGE significantly alleviated the ADlike skin symptoms and clinical signs. The suppression of AD by γ-irradiated BGE was accompanied by a decrease in the serum level of IgE and IL-4, as well as the number of leukocyte. Gamma-irradiated BGE also suppressed IL-4 and increased IFN-γ in splenocytes. Our data suggests that γ-irradiated BGE may be effective therapeutic agents for the treatment of AD.

Radiolabeling and preliminary biodistribution study of 99mTc-labeled antibody-mimetic scaffold protein repebody for initial clearance properties.

Antibody-mimetic proteins are intensively being developed for biomedical applications including tumor imaging and therapy. Among them, repebody is a new class of protein that consists of highly diverse leucine-rich repeat (LRR) modules. Although all possible biomedical applications with repebody are ongoing, it's in vivo biodistribution and excretion pathway has not yet been explored. In this study, hexahistidine (His6)-tag bearing repebody (rEgH9) was labeled with [99mTc]-tricarbonyl, and biodistribution was performed following intravenous (I.V.) or intraperitoneal (I.P.) injection. Repebody protein was radiolabeled with high radiolabeling efficiency (>90%) and radiolabeled compound was more than 99% pure after purification. Biodistribution data indicates radiotracer has a rapid clearance from blood and excreted through the kidneys for intravenous (I.V.) injection, but comparatively slow clearance for an intraperitoneal (I.P.) injection. SPECT-CT images were found to be in agreement with biodistribution data, high activity was found inside kidneys. The observed result for rapid blood clearance and renal excretion of repebody (rEgH9) provide useful information for the further development of therapeutic strategy.

Genetically engineered and self-assembled oncolytic protein nanoparticles for targeted cancer therapy.

The integration of a targeted delivery with a tumour-selective agent has been considered an ideal platform for achieving high therapeutic efficacy and negligible side effects in cancer therapy. Here, we present engineered protein nanoparticles comprising a tumour-selective oncolytic protein and a targeting moiety as a new format for the targeted cancer therapy. Apoptin from chicken anaemia virus (CAV) was used as a tumour-selective apoptotic protein. An EGFR-specific repebody, which is composed of LRR (Leucine-rich repeat) modules, was employed to play a dual role as a tumour-targeting moiety and a fusion partner for producing apoptin nanoparticles in E. coli, respectively. The repebody was genetically fused to apoptin, and the resulting fusion protein was shown to self-assemble into supramolecular repebody-apoptin nanoparticles with high homogeneity and stability as a soluble form when expressed in E. coli. The repebody-apoptin nanoparticles showed a remarkable anti-tumour activity with negligible side effects in xenograft mice through a cooperative action of the two protein components with distinct functional roles. The repebody-apoptin nanoparticles can be developed as a systemic injectable and tumour-selective therapeutic protein for targeted cancer treatment.

Synthesis and evaluation of an (125)I-labeled azide prosthetic group for efficient and bioorthogonal radiolabeling of cyclooctyne-group containing molecules using copper-free click reaction.

Herein we report the radiosynthesis of a pyridine derived azide prosthetic group for iodine radioisotope labeling of dibenzocyclooctyne (DBCO) conjugated molecules. The radiolabeling of the stannylated precursor 2 was conducted using [(125)I]NaI and chloramine-T to give (125)I-labeled azide ([(125)I]1) with high radiochemical yield (72±8%, n=4) and radiochemical purity (>99%). Using (125)I-labeled azide ([(125)I]1), cyclic RGD peptide and near infrared fluorescent molecule were efficiently labeled with modest to good radiochemical yields. The biodistribution study and SPECT/CT images showed that [(125)I]1 underwent rapid renal clearance. These results clearly demonstrated that [(125)I]1 could be used as an useful radiotracer for in vivo pre-targeted imaging as well as efficient in vitro radiolabeling of DBCO containing molecules.

Efficient method for iodine radioisotope labeling of cyclooctyne-containing molecules using strain-promoted copper-free click reaction.

Herein we report an efficient method for iodine radioisotope labeling of cyclooctyne-containing molecules using copper-free click reaction. For this study, radioiodination using the tin precursor 2 was carried out at room temperature to give (125)I-labeled azide ([(125)I]1) with high radiochemical yield (85%) and excellent radiochemical purity. Dibenzocyclooctyne (DBCO) containing cRGD peptide and gold nanoparticle were labeled with [(125)I]1 at 37°C for 30min to give triazoles with good radiochemical yields (67-95%). We next carried out tissue biodistribution study of [(125)I]1 in normal ICR mice to investigate the level of organ accumulation which needs to be considered for pre-targeted in vivo imaging. Large amount of [(125)I]1 distributed rapidly in liver and kidney from bloodstream and underwent rapid renal and hepatobiliary clearance. Moreover [(125)I]1 was found to be highly stable (>92%) in mouse serum for 24h. Therefore [(125)I]1 could be used as a potentially useful radiotracer for pre-targeted imaging. Those results clearly indicated that the present radiolabeling method using copper free click reaction would be quite useful for both in vitro and in vivo labeling of DBCO group containing molecules with iodine radioisotopes.