Knowledge extraction of sonophotocatalytic treatment for acid blue 113 dye removal by artificial neural networks.

Removing decolorizing acid blue 113 (AB113) dye from textile wastewater is challenging due to its high stability and resistance to removal. In this study, we used an artificial neural network (ANN) model to estimate the effect of five different variables on AB113 dye removal in the sonophotocatalytic process. The five variables considered were reaction time (5-25 min), pH (3-11), ZnO dosage (0.2-1.0 g/L), ultrasonic power (100-300 W/L), and persulphate dosage (0.2-3 mmol/L). The most effective model had a 5-7-1 architecture, with an average deviation of 0.44 and R2 of 0.99. A sensitivity analysis was used to analyze the impact of different process variables on removal efficiency and to identify the most effective variable settings for maximum dye removal. Then, an imaginary sonophotocatalytic system was created to measure the quantitative impact of other process parameters on AB113 dye removal. The optimum process parameters for maximum AB 113 removal were identified as 6.2 pH, 25 min reaction time, 300 W/L ultrasonic power, 1.0 g/L ZnO dosage, and 2.54 mmol/L persulfate dosage. The model created was able to identify trends in dye removal and can contribute to future experiments.

Predictive capability evaluation and optimization of Pb(II) removal by reduced graphene oxide-based inverse spinel nickel ferrite nanocomposite.

Pb(II) is a heavy metal that is a prominent contaminant in water contamination. Among the different pollution removal strategies, adsorption was determined to be the most effective. The adsorbent and its type determine the adsorption process's efficiency. As part of this effort, a magnetic reduced graphene oxide-based inverse spinel nickel ferrite (rGNF) nanocomposite for Pb(II) removal is synthesized, and the optimal values of the independent process variables (like initial concentration, pH, residence time, temperature, and adsorbent dosage) to achieve maximum removal efficiency are investigated using conventional response surface methodology (RSM) and artificial neural networks (ANN). The results indicate that the initial concentration, adsorbent dose, residence time, pH, and process temperature are set to 15 mg/L, 0.55 g/L, 100 min, 5, and 30 °C, respectively, the maximum removal efficiency (99.8%) can be obtained. Using the interactive effects of process variables findings, the adsorption surface mechanism was examined in relation to process factors. A data-driven quadratic equation is derived based on the ANOVA, and its predictions are compared with ANN predictions to evaluate the predictive capabilities of both approaches. The R2 values of RSM and ANN predictions are 0.979 and 0.991 respectively and confirm the superiority of the ANN approach.

Modeling and optimization of process parameters of biofilm reactor for wastewater treatment.

The efficiency of heavy metal in biofilm reactors depends on absorption process parameters, and those relationships are complicated. This study explores artificial neural networks (ANNs) feasibility to correlate the biofilm reactor process parameters with absorption efficiency. The heavy metal removal and turbidity were modeled as a function of five process parameters, namely pH, temperature(°C), feed flux(ml/min), substrate flow(ml/min), and hydraulic retention time(h). We developed a standalone ANN software for predicting and analyzing the absorption process in handling industrial wastewater. The model was tested extensively to confirm that the predictions are reasonable in the context of the absorption kinetics principles. The model predictions showed that the temperature and pH values are the most influential parameters affecting absorption efficiency and turbidity.

Artificial neural networks modeling for lead removal from aqueous solutions using iron oxide nanocomposites from bio-waste mass.

Heavy metal ions in aqueous solutions are taken into account as one of the most harmful environmental issues that ominously affect human health. Pb(II) is a common pollutant among heavy metals found in industrial wastewater, and various methods were developed to remove the Pb(II). The adsorption method was more efficient, cheap, and eco-friendly to remove the Pb(II) from aqueous solutions. The removal efficiency depends on the process parameters (initial concentration, the adsorbent dosage of T-Fe3O4 nanocomposites, residence time, and adsorbent pH). The relationship between the process parameters and output is non-linear and complex. The purpose of the present study is to develop an artificial neural networks (ANN) model to estimate and analyze the relationship between Pb(II) removal and adsorption process parameters. The model was trained with the backpropagation algorithm. The model was validated with the unseen datasets. The correlation coefficient adj.R2 values for total datasets is 0.991. The relationship between the parameters and Pb(II) removal was analyzed by sensitivity analysis and creating a virtual adsorption process. The study determined that the ANN modeling was a reliable tool for predicting and optimizing adsorption process parameters for maximum lead removal from aqueous solutions.

Prediction of batch sorption of barium and strontium from saline water.

Celestite and barite formation results in contamination of barium and strontium ions hinder oilfield water purification. Conversion of bio-waste sorbent products deals with a viable, sustainable and clean remediation approach for removing contaminants. Biochar sorbent produced from rice straw was used to remove barium and strontium ions of saline water from petroleum industries. The removal efficiency depends on biochar amount, pH, contact time, temperature, and Ba/Sr concentration ratio. The interactions and effects of these parameters with removal efficiency are multifaceted and nonlinear. We used an artificial neural network (ANN) model to explore the correlation between process variables and sorption responses. The ANN model is more accurate than that of existing kinetic and isotherm equations in assessing barium and strontium removal with adj. R2 values of 0.994 and 0.991, respectively. We developed a standalone user interface to estimate the barium and strontium removal as a function of sorption process parameters. Sensitivity analysis and quantitative estimation were carried out to study individual process variables' impact on removal efficiency.

Modeling and optimization of chlorophenol rejection for spiral wound reverse osmosis membrane modules.

This study shows an artificial neural network (ANN) model of chlorophenol rejection from aqueous solutions and predicting the performance of spiral wound reverse osmosis (SWRO) modules. This type of rejection shows complex non-linear dependencies on feed pressure, feed temperature, concentration, and feed flow rate. It provides a demanding test of the application of ANN model analysis to SWRO modules. The predictions are compared with experimental data obtained with SWRO modules. The overall agreement between the experimental and ANN model predicted was almost 99.9% accuracy for the chlorophenol rejection. The ANN model approach has the advantage of understanding the complex chlorophenol rejection phenomena as a function of SWRO process parameters.

Use of Anti-Craving Agents in Soldiers with Alcohol Dependence Syndrome.

BACKGROUND: In a search for an effective 'anti-alcohol pill', three modern anti-craving agents have been studied in alcoholics of Army/ DSC, Air Force, Navy and Coast Guard. METHODS: 129 patients of alcohol dependence syndrome were randomly assigned to three groups where topiramate, acamprosate and naltrexone were used as anti-craving agents in a year long prospective study. Of these 92 patients completed the study. RESULT AND CONCLUSION: Topiramate (76.3%) appears to be significantly more effective (p<0.01) in sustaining abstinence, though naltrexone (57.7%) and acamprosate (60.70%) offer moderate relapse-prevention efficacy. Side effects of all the three agents have been mild, transient and self-limiting. We recommend a trial of topiramate, before invaliding out of any alcoholic soldier.

GRAVES' DISEASE WITH ORGANIC MOOD SYNDROME (A Case Report).

A case of Graves' disease with organic mood syndrome in a 3G year old man is reported. Patient had thyrotoxicosis and developed features of mania while in the hospital which necessitated antipsychotic drug therapy.