Comparative Analysis of the Physicochemical and Biological Characteristics of Freeze-Dried PEGylated Cationic Solid Lipid Nanoparticles.

Cationic solid-lipid nanoparticles (cSLNs) have become a promising tool for gene and RNA therapies. PEGylation (PEG) is crucial in enhancing particle stability and protection. We evaluated the impact of PEG on the physicochemical and biological characteristics of cholesteryl-oleate cSLNs (CO-cSLNs). Several parameters were analyzed, including the particle size, polydispersity index, zeta potential, shape, stability, cytotoxicity, and loading efficiency. Five different formulations with specific PEGs were developed and compared in both suspended and freeze-dried states. Small, homogeneous, and cationic suspended nanoparticles were obtained, with the Gelucire 50/13 (PEG-32 hydrogenated palm glycerides; Gelucire) and DSPE-mPEG2000 (1,2-distearoyl-phosphatidylethanolamine-methyl-polyethyleneglycol conjungate-2000; DSPE) formulations exhibiting the smallest particle size (~170 nm). Monodisperse populations of freeze-dried nanoparticles were also achieved, with particle sizes ranging from 200 to 300 nm and Z potential values of 30-35 mV. Notably, Gelucire again produced the smallest particle size (211.1 ± 22.4), while the DSPE and Myrj S100 (polyoxyethylene (100) stearate; PEG-100 Stearate) formulations had similar particle sizes to CO-cSLNs (~235 nm). The obtained PEGylated nanoparticles showed suitable properties: they were nontoxic, had acceptable morphology, were capable of forming SLNplexes, and were stable in both suspended and lyophilized states. These PEG-cSLNs are a potential resource for in vivo assays and have the advantage of employing cost-effective PEGs. Optimizing the lyophilization process and standardizing parameters are also recommended to maintain nanoparticle integrity.

Optimisation of the Manufacturing Process of Organic-Solvent-Free Omeprazole Enteric Pellets for the Paediatric Population: Full Factorial Design.

Liquid formulations are mostly used in the paediatric population. However, with certain active pharmaceutical ingredients (APIs), it is very difficult to guarantee quality and stability; this is the case, for example, with omeprazole. Omeprazole is used as a model drug due to the lack of a paediatric formulation meeting gastro-resistance requirements, which remains a challenge today. In this experimental study, the development of enteric polymer-coated pellets is proposed. It is proposed to use aqueous coating dispersions without the use of organic solvents, which are commonly used in fluidised bed coatings. To do this, the design of experiments method is used as a statistical tool for experiment creation and the subsequent analysis of the responses. In particular, this study uses a randomised full factorial design. The mean weight increases of the protective layer and the enteric coating are chosen as factors. Each factor is assigned two levels. Therefore, the design of the used experiments is a 22 + 1 central point. Overall, the obtained pellets can be an alternative to the compounding formulas of omeprazole that are currently used in the paediatric population, which do not meet the gastro-resistance specifications necessary to guarantee the therapeutic efficacy of this active ingredient.

Methods for Developing a Process Design Space Using Retrospective Data.

Prospectively planned designs of experiments (DoEs) offer a valuable approach to preventing collinearity issues that can result in statistical confusion, leading to misinterpretation and reducing the predictability of statistical models. However, it is also possible to develop models using historical data, provided that certain guidelines are followed to enhance and ensure proper statistical modeling. This article presents a methodology for constructing a design space using process data, while avoiding the common pitfalls associated with retrospective data analysis. For this study, data from a real wet granulation process were collected to pragmatically illustrate all the concepts and methods developed in this article.

Development of a Carvedilol Oral Liquid Formulation for Paediatric Use.

Carvedilol (CARV) is an 'off-label' ß-blocker drug to treat cardiovascular diseases in children. Since CARV is nearly insoluble in water, only CARV solid forms are commercialized. Usually, CARV tablets are manipulated to prepare an extemporaneous liquid formulation for children in hospitals. We studied CARV to improve its aqueous solubility and develop an oral solution. In this study, we assessed the solubility and preliminary stability of CARV in different pH media. Using malic acid as a solubility enhancer had satisfactory results. We studied the chemical, physical, and microbiological stability of 1 mg/mL CARV-malic acid solution. A design of experiment (DoE) was used to optimize the CARV solution's preparation parameters. A 1 mg/mL CARV solution containing malic acid was stable for up to 12 months at 25 °C and 30 °C and 6 months at 40 °C. An equation associating malic acid with CARV concentrations was obtained using DoE. Microbiological data showed that the use of methylparaben was not necessary for this period of time. We successfully developed an aqueous CARV solution suitable for paediatrics and proven to be stable over a 12-month period.

Pellets and gummies: Seeking a 3D printed gastro-resistant omeprazole dosage for paediatric administration.

The production of 3D printed pharmaceuticals has thrived in recent years, as it allows the generation of customised medications in small batches. This is particularly helpful for patients who need specific doses or formulations, such as children. Compounding pharmacies seek alternatives to conventional solid oral doses, opting for oral liquid formulations. However, ensuring quality and stability, especially for pH-sensitive APIs like omeprazole, remains a challenge. This paper presents the application of semi-solid extrusion 3D printing technology to develop patient-tailored medicinal gummies, with an eye-catching appearances, serving as an innovative omeprazole pharmaceutical form for paediatric use. The study compares 3D printing hydrogels with dissolved omeprazole to hydrogels loaded with gastro-resistant omeprazole pellets, a ground-breaking approach.. Gastro-resistance and dissolution profiles were studied using different methods for better comparison and to emphasize the significance of the assay's methodology. Both developed formulas exhibit proper rheology, good printability, and meet content and mass uniformity standards. However, the high gastro-resistance and suitable release profile of 3D printed chewable semi-solid doses with enteric pellets highlight this as an effective strategy to address the challenge of paediatric medication.

Palatability and Stability Studies to Optimize a Carvedilol Oral Liquid Formulation for Pediatric Use.

Carvedilol (CARV) is a blocker of α- and ß- adrenergic receptors, used as an "off-label" treatment for cardiovascular diseases in pediatrics. Currently, there is no marketed pediatric-appropriate CARV liquid formulation, so its development is necessary. Palatability (appreciation of smell, taste, and aftertaste) is a key aspect to be considered during the development of pediatric formulations since only formulations with good palatability also have adequate acceptability in this population. Consequently, the aim of this research was to assess the palatability and acceptability of different CARV formulations using an in vivo taste assessment (ID Number PR103/22) in order to select the highest palatability-rated CARV formulation. The preparation of CARV formulations was based on a reference 1 mg/mL CARV solution, which contains malic acid as a solubilizing agent. Subsequently, sucralose and flavoring agents were added and mixed until complete dissolution to the corresponding formulations. Adult volunteers participated in this study and evaluated the taste and odor of various CARV formulations through a questionnaire and a sensory test. The mean palatability score, measured on a 10-point scale, increased from 1.60 for the unflavored control to 7.65 for the highest-rated flavored formulation. Moreover, the bitterness of the optimized CARV formulation was reduced from 66.67% to 17.86%, and the taste pleasantness was increased from 25/100 to 73/100. This optimized CARV formulation contains a sweetening agent, sucralose, in addition to two flavoring agents at appropriate concentrations for pediatrics. Furthermore, the physicochemical and microbiological stability of the optimized CARV formulation were evaluated for 6 months at 25, 30, and 40 °C, in addition to in-use stability for 15 days at 25 °C, whose results were confirmed. Thus, we successfully developed a palatable CARV liquid solution that contains excipients appropriate for pediatrics and is stable under the studied conditions.

miRNA nanoencapsulation to regulate the programming of the blood-brain barrier permeability by hypoxia.

Central nervous system (CNS)-related diseases are difficult to treat as most therapeutic agents they cannot reach the brain tissue, mainly due to the blood-brain barrier (BBB), arguably the tightest barrier between the human body and cerebral parenchyma, which routinely excludes most xenobiotic therapeutics compounds. The BBB is a multicellular complex that structurally forms the neurovascular unit (NVU) and is organized by neuro-endothelial and glial cells. BBB breakdown and dysfunction from the cerebrovascular cells lead to leakages of systemic components from the blood into the CNS, contributing to neurological deficits. Understanding the molecular mechanisms that regulate BBB permeability and disruption is essential for establishing future therapeutic strategies to restore permeability and improve cerebrovascular health. MicroRNAs (miRNAs), a type of small non-coding RNAs, are emerging as an important regulator of BBB integrity by modulating gene expression by targeting mRNA transcripts. miRNAs is implicated in the development and progression of various illnesses. Conversely, nanoparticle carriers offer unprecedented opportunities for cell-specific controlled delivery of miRNAs for therapeutic purposes. In this sense, we present in this graphical review critical evidence in the regulation of cell junction expression mediated by miRNAs induced by hypoxia and for the use of nanoparticles for the delivery of miRNA-based therapeutics in the treatment of BBB permeability.

Development of a Standardized Method for Measuring Bioadhesion and Mucoadhesion That Is Applicable to Various Pharmaceutical Dosage Forms.

Although some methods for measuring bioadhesion/mucoadhesion have been proposed, a standardized method is not yet available. This is expected to hinder systematic comparisons of results across studies. This study aimed to design a single/systematic in vitro method for measuring bioadhesion/mucoadhesion that is applicable to various pharmaceutical dosage forms. To this end, we measured the peak force and work of adhesion of minitablets, pellets, and a bioadhesive emulsion using a texture analyzer. Porcine tissue was used to simulate human stomach/skin conditions. The results of these formulations were then compared to those for formulations without the bioadhesive product. We conducted a case study to assess the stability of a bioadhesive emulsion. The results for the two parameters assessed were contact time = 60 s and contact force = 0.5 N at a detachment speed of 0.1 mm/s. Significant differences were observed between the bioadhesive and control formulations, thus demonstrating the adhesive capacity of the bioadhesive formulations. In this way, a systematic method for assessing the bioadhesive capacity of pharmaceutical dosage forms was developed. The method proposed here may enable comparisons of results across studies, i.e., results obtained using the same and different pharmaceutical formulations (in terms of their bioadhesion/mucoadhesion capacity). This method may also facilitate the selection of potentially suitable formulations and adhesive products (in terms of bioadhesive properties).

New Formulations Loading Caspofungin for Topical Therapy of Vulvovaginal Candidiasis.

Vulvovaginal candidiasis (VVC) poses a significant problem worldwide affecting women from all strata of society. It is manifested as changes in vaginal discharge, irritation, itching and stinging sensation. Although most patients respond to topical treatment, there is still a need for increase the therapeutic arsenal due to resistances to anti-infective agents. The present study was designed to develop and characterize three hydrogels of chitosan (CTS), Poloxamer 407 (P407) and a combination of both containing 2% caspofungin (CSP) for the vaginal treatment of VVC. CTS was used by its mucoadhesive properties and P407 was used to exploit potential advantages related to increasing drug concentration in order to provide a local effect. The formulations were physically, mechanically and morphologically characterized. Drug release profile and ex vivo vaginal permeation studies were performed. Antifungal efficacy against different strains of Candida spp. was also evaluated. In addition, tolerance of formulations was studied by histological analysis. Results confirmed that CSP hydrogels could be proposed as promising candidates for the treatment of VVC.

Excipients in the Paediatric Population: A Review.

This theoretical study seeks to critically review the use of excipients in the paediatric population. This study is based on the rules and recommendations of European and American drug regulatory agencies. On the one hand, this review describes the most frequent excipients used in paediatric medicine formulations, identifying the compounds that scientific literature has marked as potentially harmful regarding the side effects generated after exposure. On the other hand, this review also highlights the importance of carrying out safety -checks on the excipients, which, in most cases, are linked to toxicity studies. An excipient in the compilation of paediatric population databases is expected to target safety and toxicity, as in the STEP database. Finally, a promising pharmaceutical form for child population, ODT (Orally Disintegrating Tablets), will be studied.

Robustness Optimization of an Existing Tablet Coating Process Applying Retrospective Knowledge (rQbD) and Validation.

The objective of these studies is to verify and validate the improvement in the inter-tablet coating uniformity for an industrially commercialized coated tablet, without involving changes in the approved registration dossier. Using the CPP (critical process parameters) determined from previous retrospective statistical analysis, the recommended working ranges are identified. Retrospective analysis showed that the design of experiments (DoE) provided an improved process variable configuration. Therefore, it is decided to study two critical parameters: Product temperature and drum speed, with an additional 22 experimental design. The quality results of the samples analyzed show that the aesthetic defects of the batches made with the new working ranges have been reduced. These results have also been corroborated with the 42 industrial batches manufactured with the new ranges. With the optimized parameters, tablets have been coated and the suitability of the model determined. The results demonstrated the overall reliability and effectiveness of the proposed Quality by Design approach and provides a useful tool to help optimize the industrial coating process. This study confirms that it is possible to optimize and validate the manufacturing process of an existing commercial product by means of a DoE with retrospective data. Therefore, no variation in the dossier is required.

Formulation of Sustained Release Hydrophilic Matrix Tablets of Tolcapone with the Application of Sedem Diagram: Influence of Tolcapone's Particle Size on Sustained Release.

Hydrophilic matrix tablets are a type of sustained release dosage form characterized by distributing a drug in a matrix that is usually polymeric. Tolcapone is a drug that inhibits the enzyme catechol-O-methyl transferase. In recent years, it has been shown that tolcapone is a potent inhibitor of the amyloid aggregation process of the transthyretin protein, and acts by stabilizing the structure of the protein, reducing the progression of familial amyloid polyneuropathy. The main objective of this study was to obtain a sustained release tablet of tolcapone for oral administration with a preferred dosage regimen of 1 administration every 12 or 24 h and manufactured, preferably, by direct compression. The SeDeM Diagram method has been used for the formulation development of hydrophilic matrix tablets. Given the characteristics of tolcapone, the excipient selected for the formation of the polymeric matrix was a high viscosity hydroxypropylmethylcellulose (Methocel® K100M CR). A decrease in the particle size of tolcapone resulted in a slower dissolution release of the formulation when the concentration of the polymer Methocel® K100M CR was below 29%. These surprising and novel results have given rise to patent number WO/2018/019997.

Development and Validation of a New High-Performance Liquid Chromatography Method for the Simultaneous Quantification of Coenzyme Q10, Phosphatidylserine, and Vitamin C from a Cutting-Edge Liposomal Vehiculization.

A high-performance liquid chromatography (HPLC) method was developed to simultaneously quantify three widely used active substances such as coenzyme Q10, phosphatidylserine, and vitamin C. This new method optimizes current timing and costs in the analyses of these three active substances. Additionally, since the analyzed compounds were encapsulated on a cutting-edge liposomal formulation, further processing was necessary to be developed prior to HPLC analyses. The technique was studied and adequately validated in accordance with the guidelines of the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) regarding selectivity, linearity, accuracy, precision, and robustness. After data treatment of results, linear regressions for all active substances showed an optimal linearity with a correlation coefficient of >0.999 in the concentration range between 70 to 130% of the liposomal formulation and less than a 3% relative standard deviation (RSD) in accuracy and precision.

Improved synthesis and characterization of cholesteryl oleate-loaded cationic solid lipid nanoparticles with high transfection efficiency for gene therapy applications.

The development of new nanoparticle formulations that are capable of high transfection efficiency without toxicity is essential to provide new tools for gene therapy. However, the issues of complex, poorly reproducible manufacturing methods, and low efficiencies during in vivo testing have prevented translation to the clinic. We have previously reported the use of cholesteryl oleate as a novel excipient for solid lipid nanoparticles (SLNs) for the development of highly efficient and nontoxic nucleic acid delivery carriers. Here, we performed an extensive characterization of this novel formulation to make the scale up under Good Manufacturing Practice (GMP) possible. We also describe the complete physicochemical and biological characterization of cholesteryl oleate-loaded SLNs to ensure the reproducibility of this formula and the preservation of its characteristics before and after the lyophilization process. We defined the best manufacturing method and studied the influence of some parameters on the obtained nanoparticles using the Quality by Design (ICH Q8) guideline to obtain cholesteryl oleate-loaded SLNs that remain stable during storage and guarantee in vitro nucleic acid delivery efficacy. Our results indicate that this improved formulation is suitable for gene therapy with the possibility of scale-up the manufacturing of nanoparticles under GMP conditions.

A new design for the review and appraisal of semi-solid dosage forms: Semi-solid Control Diagram (SSCD).

The Semi-solid Control Diagram (SSCD) is a new tool designed for the study of different excipients and different semi-solid dosage forms. It can be used to review and evaluate different formulations and/or batches and facilitate the selection of one of them that will present the most suitable galenic characteristics for topical application. It is also useful to track stability studies by comparing the diagrams, which allows to measure the impact of subjecting the formulation to different conditions and times to be examined. In this study, the Semi-solid Control Diagram (SSCD) is used as an instrument for studying and evaluating semi-solid pharmaceutical dosage forms, by comparing several different semisolid preparations (lipogels). With these results, the tool is validated and the best formulation has been discriminated from the others.

Cholesteryl oleate-loaded cationic solid lipid nanoparticles as carriers for efficient gene-silencing therapy.

BACKGROUND: Cationic solid lipid nanoparticles (SLNs) have been given considerable attention for therapeutic nucleic acid delivery owing to their advantages over viral and other nanoparticle delivery systems. However, poor delivery efficiency and complex formulations hinder the clinical translation of SLNs. AIM: The aim of this study was to formulate and characterize SLNs incorporating the cholesterol derivative cholesteryl oleate to produce SLN-nucleic acid complexes with reduced cytotoxicity and more efficient cellular uptake. METHODS: Five cholesteryl oleate-containing formulations were prepared. Laser diffraction and laser Doppler microelectrophoresis were used to evaluate particle size and zeta potential, respectively. Nanoparticle morphology was analyzed using electron microscopy. Cytotoxicity and cellular uptake of lipoplexes were evaluated using flow cytometry and fluorescence microscopy. The gene inhibition capacity of the lipoplexes was assessed using siRNAs to block constitutive luciferase expression. RESULTS: We obtained nanoparticles with a mean diameter of approximately 150-200 nm in size and zeta potential values of 25-40 mV. SLN formulations with intermediate concentrations of cholesteryl oleate exhibited good stability and spherical structures with no aggregation. No cell toxicity of any reference SLN was observed. Finally, cellular uptake experiments with DNA-and RNA-SLNs were performed to select one reference with superior transient transfection efficiency that significantly decreased gene activity upon siRNA complexation. CONCLUSION: The results indicate that cholesteryl oleate-loaded SLNs are a safe and effective platform for nonviral nucleic acid delivery.