A miniaturized matrix solid-phase dispersion methodology (µMSPD) for determination of ß-carboline alkaloids in tobacco samples by UPLC-ESI-Q-TOF/MSE.

Alkaloids play an important role in the chemical composition of tobacco, due to their effects that have led to the global consumption of this commodity. The ß-carboline alkaloids present inhibitory action against the enzyme monoamine oxidase (MAO), which enhances the susceptibility to chemical dependence in smokers. There is a need for scientific studies to ensure the correct identification and quantification of these compounds in tobacco matrices. In this work, we present the development and validation of a microextraction analytical method for determination and quantification of the alkaloids harmaline, harmalol, harmane, harmine, norharmane, and tetrahydroharmine in natural and processed samples of tobacco, employing micro-matrix solid-phase dispersion (µMSPD), ultra-performance liquid chromatography (UPLC), and mass spectrometry (MS). The optimized µMSPD procedure employed of 0.01 g of sample, 0.1 g of Discovery® DPA-6S adsorbent, and elution with 2 mL of aqueous 1 % formic acid solution, resulting in a fast, practical, economical, and environmentally friendly technique. Validation of the methodology showed that it presented good linearity (R2 > 0.9945), satisfactory accuracy and precision (in the range from 72 ± 16 % to 109 ± 9 %), and limits of quantification (LOQ) and detection (LOD) in the ranges 0.02-1.0 µg g-1 and 0.01-0.2 µg g-1, respectively. The developed method was applied to tobacco samples, proving to be efficient for determination of ß-carboline alkaloids. The compounds harmane and norharmane were quantified in samples of fresh tobacco leaves, cured tobacco leaves, twisted tobacco, and cigarettes. Harmine was only not quantified in the cigarettes.

Use of Magnesium Silicate as a New Type of Adsorbent for Dispersive Solid-Phase Extraction Cleanup of the Quick, Cheap, Effective, Rugged, and Safe Method for Pesticides During Analysis of Lager Beer by Gas Chromatography-Tandem Mass Spectrometry.

Background: Pesticides are applied for pest control during the production of cereal grains used in beer production. Given the risks for consumers, it is important to analyze the pesticide residues. Objective: Quick, easy, cheap, effective, rugged, and safe (QuEChERS)-based methods are very effective, and improvement in the cleanup step is an important approach. Methods: Primary secondary amine (PSA) and magnesium silicate were evaluated for dispersive-solid-phase extraction (d-SPE) cleanup step in extracts provided by the QuEChERS method in combination with GC-tandem MS for the determination of acetamiprid, terburfos, alachlor, ametryn, atrazine, azoxystrobin, carbofuran, carbosulfan, cypermethrin, deltamethrin, difenoconazole, esfenvalerate, flutriafol, thiamethoxam, and parathion-methyl in lager beer. Results: The amount of 50 mg of magnesium silicate was suitable for cleaning up beer extract as an alternative d-SPE material to PSA. The method was validated using beer fortified with pesticides at three concentration levels (0.002, 0.01, and 0.1 µg/mL). Average recoveries ranged from 70 to 123%, with RSDs between 0.3 and 10.5 %. Matrix effects were observed by comparing the slope of matrix-matched standard calibration with that of solvent. The method provided good linearity at the concentration levels of 0.001-2.5 µg/mL. Detection limits ranged from 0.0001 to 0.0007 µg/mL and quantification limits ranged from 0.001 to 0.006 µg/mL. The method was applied to nine beer brands. Conclusions: Results showed that magnesium silicate is an efficient alternative cleanup material to reduce analysis costs while maintaining the method reliability and accuracy. Highlights: Magnesium silicate was effective as adsorbent for d-SPE step in the analysis of pesticides in beer.

Multiresidue Determination of Carbamate, Organophosphate, Neonicotinoid and Triazole Pesticides in Roasted Coffee Using Ultrasonic Solvent Extraction and Liquid Chromatography-Tandem Mass Spectrometry.

Background: A simple and effective extraction method based on ultrasonic solvent extraction and liquid-liquid microextraction (as the cleaning step) was developed to determine seven pesticide residues in roasted coffee (Coffea arabica) using ultra-performance LC-tandem MS. Objective: Different parameters of the method were evaluated, including solvent type and amount and sonication time. The best results were obtained using 1.0 g roasted coffee and acetonitrile (5 mL) as the extraction solvent with sonication for 15 min. The method was validated using roasted coffee samples fortified with pesticides at different concentration levels (0.1, 0.2, 0.3, and 0.5 µg/kg). Average recoveries (three replicates) ranged from 74.3 to 99.9%, with RSDs between 0.7 and 10.2%. Results: The method showed good linearity for all the pesticides studied, with correlation coefficients >0.99. The detection limits ranged from 0.02 to 0.05 µg/kg, and the quantification limit for all the compounds was 0.10 µg/kg. The proposed method was applied for analysis of the compounds in commercial coffee samples from a producer in Minas Gerais State, Brazil. No residues of the pesticides were detected in the samples. Highlights: Ultrasonic solvent extraction was effective in the analysis of pesticides in roasted coffee.

Evaluation of a novel metal-organic framework as an adsorbent for the extraction of multiclass pesticides from coconut palm (Cocos nucifera L.): An analytical approach using matrix solid-phase dispersion and liquid chromatography.

We report the synthesis, characterization, and application of [Zn(1,4-benzenedicarboxylate)(H2 O)2 ]n , Zn(1,4-benzenedicarboxylate)0.99 (NH2 -1,4-benzenedicarboxylate)0.01 (H2 O)2 ]n , [Zn(1,4-benzenedicarboxylate)0.95 (NH2 -1,4-benzenedicarboxylate)0.05 (H2 O)2 ]n , and [Zn(1,4-benzenedicarboxylate)0.9 (NH2 -1,4-benzenedicarboxylate)0.1 (H2 O)2 ]n as sorbents for the extraction of multiclass pesticides from coconut palm. Liquid chromatography with ultraviolet diode array detection was used as the analysis technique, and the experiments were performed at one fortification level (0.1 µg/g). The recoveries were 47-67, 51-70, 58-72, and 64-76% for [Zn(1,4-benzenedicarboxylate)(H2 O)2 ]n , Zn(1,4-benzenedicarboxylate)0.99 (NH2 -1,4-benzenedicarboxylate)0.01 (H2 O)2 ]n , [Zn(1,4-benzenedicarboxylate)0.95 (NH2 -1,4-benzenedicarboxylate)0.05 (H2 O)2 ]n , and [Zn(1,4-benzenelate)0.95 (NH2 -1,4-benzenedicarboxylate)0.05 (H2 O)2 ]n , and [Zn(1,4-benzenedicarboxylate)0.9 (NH2 -1,4-benzenedicarboxylate)0.1 (H2 O)2 ]n , respectively, with relative standard deviation ranging from 1 to 7% (n = 3). Detection and quantification limits were 0.01-0.05 and 0.05-0.2 µg/g, respectively, for the different pesticides studied. The method developed was linear over the range tested (0.01-10.0 µg/g) with r2  > 0.9991. A direct comparison of [Zn(1,4-benzenedicarboxylate)0.9 (NH2 -1,4-benzenedicarboxylate)0.1 (H2 O)2 ]n with the commercially available neutral alumina showed that [Zn(1,4-benzenedicarboxylate)0.9 (NH2 -1,4-benzenedicarboxylate)0.1 (H2 O)2 ]n was a similar extracting phase for the pesticides investigated.

Determination of Tryptamines and ß-Carbolines in Ayahuasca Beverage Consumed During Brazilian Religious Ceremonies.

Ayahuasca is a potent hallucinogenic beverage prepared from Banisteriopsis caapi in combination with other psychoactive plants. N,N-dimethyltryptamine, tryptamine, harmine, harmaline, harmalol, and tetrahydroharmine were quantified in ayahuasca samples using a simple and low-cost method based on SPE and LC with UV diode-array detection. The experimental variables that affect the SPE method, such as type of solid phase and nature of solvent, were optimized. The method showed good linearity (r > 0.9902) and repeatability (RSD < 0.8%) for alkaloid compounds, with an LOD of 0.12 mg/L. The proposed method was used to analyze 20 samples from an ayahuasca cooking process from a religious group located in the municipality of Fortaleza, state of Ceará, Brazil. The results showed that concentrations of the target compounds ranged from 0.3 to 36.7 g/L for these samples.

Dual emission tunable in the near-infrared (NIR) and visible (VIS) spectral range by mix-LnMOF.

In this study, we describe the synthetic approach, crystallographic structure, luminescent behavior and elucidation of the channels of the energy conversion in heteronuclear coordination polymers with emission in the visible (Eu(3+) and organic ligand) and near-infrared (Nd(3+)) range. The [(Nd0.9Eu0.1)2(dipc)3(H2O)3]n·nH2O, [(Nd0.7Eu0.3)2(dipc)3(H2O)3]n·nH2O, [(Nd0.5Eu0.5)2(dipc)3(H2O)3]n·nH2O, [(Nd0.3Eu0.7)2(dipc)3(H2O)3]n·nH2O, [(Nd0.1Eu0.9)2(dipc)3(H2O)3]n·nH2O, [Eu2(dipc)3(H2O)3]n·nH2O and [Nd2(dipc)3(H2O)3]n·nH2O materials are obtained by hydrothermal conditions from pyridine-2,6-dicarboxylic acid (H2dipc) and Ln2O3 oxide (Ln = Eu and Nd). The fine structures in the emission spectrum and spectral profile are used to investigate the ion responsible for the emission characteristics of a material (6), based on coordination polyhedron. The heteronuclear systems show emission in the dual spectral range (NIR-VIS) tuned for blue or red. The tuning of emission on the red (Eu(3+)) or blue (organic ligand) range may be performed by controlling the stoichiometric ratio of the lanthanide ions and by controlling the excitation wavelength. Nd(3+) ions display self-absorption of emission to dipc ligand, resulting in interference on the emission band profile ranging from 400 to 600 nm. The energetic process of energy transfer is operated by a cascade of energy transfer, from dipc ligand mainly to Eu(3+) ions and finishing on the Nd(3+) ion. The efficient sensitization to Nd(3+) by Eu(3+) ions is due to the presence of many resonant energy levels and the short distance between these ions.

MSPD sample preparation approach for reversed-phase liquid chromatographic analysis of pesticide residues in stem of coconut palm.

A method was developed using matrix solid-phase dispersion, together with liquid chromatography with ultraviolet diode array detector for determination of carbofuran, difenoconazole, ß-cyfluthrin, spirodiclofen and thiophanate-methyl in stem of coconut palm. The best results were obtained using 2.0 g of stem, 1.6 g of Florisil as sorbent and cyclohexane:acetone mixture (4:1). The method was validated using stem samples spiked with pesticides at four concentration levels (0.05-2.0 µg/g). Average recoveries ranged from 70 % to 114.3 %, with relative standard deviations between 1.2 % and 19.2 %. Detection and quantification limits were in the ranges 0.02-0.03 and 0.05-0.1 µg/g, respectively.

Determination of N,N-dimethyltryptamine in beverages consumed in religious practices by headspace solid-phase microextraction followed by gas chromatography ion trap mass spectrometry.

A novel analytical approach combining solid-phase microextraction (SPME)/gas chromatography ion trap mass spectrometry (GC-IT-MS) was developed for the detection and quantification N,N-dimethyltryptamine (DMT), a powerful psychoactive indole alkaloid present in a variety of South American indigenous beverages, such as ayahuasca and vinho da jurema. These particular plant products, often used within a religious context, are increasingly consumed throughout the world following an expansion of religious groups and the availability of plant material over the Internet and high street shops. The method described in the present study included the use of SPME in headspace mode combined GC-IT-MS and included the optimization of the SPME procedure using multivariate techniques. The method was performed with a polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber in headspace mode (70 min at 60 °C) which resulted in good precision (RSD<8.6%) and accuracy values (71-109%). Detection and quantification limits obtained for DMT were 0.78 and 9.5 mg L(-1), respectively and good linearity (1.56-300 mg L(-1), r(2)=0.9975) was also observed. In addition, the proposed method showed good robustness and allowed for the minimization of sample manipulation. Five jurema beverage samples were prepared in the laboratory in order to study the impact of temperature, pH and ethanol on the ability to extract DMT into solution. The developed method was then applied to the analysis of twelve real ayahuasca and vinho da jurema samples, obtained from Brazilian religious groups, which revealed DMT concentration levels between 0.10 and 1.81 g L(-1).

Investigating the potential of functionalized MCM-41 on adsorption of Remazol Red dye.

The modification of MCM-41 was performed with 3-aminopropropyltrimethoxysilane. The structural order and textural properties of the synthesized materials were studied by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetry/differential thermogravimetry, nitrogen adsorption, and desorption analysis. The adsorption capacity of NH2-MCM-41 was studied with Remazol Red dye. The following parameters were studied in the adsorption process: pH, temperature, adsorbent dosage, and initial concentration. The desorption process was studied in different concentrations of NaOH solutions. The Freundlich isotherm model was found to be fit with the equilibrium isotherm data. Kinetics of adsorption follows the modified Avrami rate equation. The maximum adsorption capacity was estimated to be 45.9 mg g(-1), with removal of the dye of 99.1%. The NH2-MCM-41 material exhibited high desorption capacity with 98.1%.

Investigating the potential of metal-organic framework material as an adsorbent for matrix solid-phase dispersion extraction of pesticides during analysis of dehydrated Hyptis pectinata medicinal plant by GC/MS.

Metal-organic frameworks aluminum terephthalate MIL-53 and Cu-benzene-1,3,5-tricarboxylate (BTC) were tested for extraction of pyrimethanil, ametryn, dichlofluanid, tetraconazole, flumetralin, kresoximmethyl, and tebuconazole from the medicinal plant Hyptis pectinata, with analysis using GC/MS in the selected ion monitoring mode. Experiments carried out at different fortification levels (0.1, 0.5, and 1.0 microg/g) resulted in recoveries in the range 61 to 107% with RSD values between 3 and 12% for the metal-organic framework materials. Detection and quantification limits ranged from 0.02 to 0.07 and 0.05 to 0.1 microg/g, respectively, for the different pesticides studied. The method developed was linear over the range tested (0.04-20.0 microg/g), with correlation coefficients ranging from 0.9987 to 0.9998. Comparison of MIL-53 and Cu-BTC with C18-bonded silica showed good performance of the MIL-53 metal-organic framework as a sorbent for the pesticides tested.

Analytical techniques for the determination of tryptamines and ß-carbolines in plant matrices and in psychoactive beverages consumed during religious ceremonies and neo-shamanic urban practices.

The consumption of ayahuasca, a hallucinogenic beverage used by indigenous communities in the Amazon, is increasing worldwide due to the expansion of syncretic religions founded in the north of Brazil in the first half of the twentieth century, such as Santo Daime and União do Vegetal. Another example is the jurema wine, a drink that originated from indigenous cultures of the northeast of Brazil. It is currently used for several religious practices throughout Brazil involving urban neo-shamanic rituals and syncretic Brazilian religions, such as Catimbó and Umbanda. Both plant products contain N,N-dimethyltryptamine which requires co-administration of naturally occurring monoamine oxidase inhibitors, for example ß-carboline derivatives, in order to induce its psychoactive effects in humans. This review explores the cultural use of tryptamines and ß-carbolines and focuses on the analytical techniques that have been recently applied to the determination of these compounds in ayahuasca, its analogues, and the plants used during the preparation of these beverages.

Determination of N,N-dimethyltryptamine in Mimosa tenuiflora inner barks by matrix solid-phase dispersion procedure and GC-MS.

N,N-dimethyltryptamine (DMT) is a potent hallucinogen found in beverages consumed in religion rituals and neo-shamanic practices over the world. Two of these religions, Santo Daime and União do Vegetal (UDV), are represented in countries including Australia, the United States and several European nations. In some of this countries there have been legal disputes concerning the legalization of ayahuasca consumption during religious rituals, a beverage rich in DMT. In Brazil, even children and pregnant women are legally authorized to consume ayahuasca in a religious context. A simple and low-cost method based on matrix solid-phase dispersion (MSPD) and gas chromatography with mass spectrometric detection (GC-MS) has been optimized for the determination of N,N-dimethyltryptamine in Mimosa tenuiflora inner bark. The experimental variables that affect the MSPD method, such as the amounts of solid-phase and herbal sample, solvent nature, eluate volume and NaOH concentration were optimized using an experimental design. The method showed good linearity (r = 0.9962) and repeatability (RSD < 7.4%) for DMT compound, with detection limit of 0.12 mg/g. The proposed method was used to analyze 24 samples obtained locally. The results showed that concentrations of the target compound in M. tenuiflora barks, ranged from 1.26 to 9.35 mg/g for these samples.

Coordination polymer adsorbent for matrix solid-phase dispersion extraction of pesticides during analysis of dehydrated Hyptis pectinata medicinal plant by GC/MS.

The coordination polymer [Zn(BDC)(H(2)O)(2)](n) was tested for extraction of pyrimethanil, ametryn, dichlofluanid, tetraconazole, flumetralin, kresoxim-methyl and tebuconazole from the medicinal plant Hyptis pectinata, with analysis using gas chromatography-mass spectrometry in selected ion monitoring mode (GC/MS, SIM). Experiments carried out at different fortification levels (0.1, 0.5 and 1.0 µg g(-1)) resulted in recoveries in the range 73-97%, and RSD values were between 5 and 12% for the [Zn(BDC)(H(2)O)(2)](n) sorbent. Detection and quantification limits ranged from 0.02 to 0.07 µg g(-1) and from 0.05 to 0.1 µg g(-1), respectively, for the different pesticides studied. The method developed was linear over the range tested (0.04-14.0 µg g(-1)), with correlation coefficients ranging from 0.9987 to 0.9998. Comparison between [Zn(BDC)(H(2)O)(2)](n) and the commercial phase C(18)-bonded silica showed good performance of the [Zn(BDC)(H(2)O)(2)](n) polymeric sorbent for the pesticides tested.

Potential of a metal-organic framework as a new material for solid-phase extraction of pesticides from lettuce (Lactuca sativa), with analysis by gas chromatography-mass spectrometry.

The metal-organic framework (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] was tested for extraction of pyrimicarb, procymidone, malathion, methyl parathion and α- and ß-endosulfan from lettuce, with analysis using GC/MS in SIM mode. Experiments were carried out in triplicate at two fortification levels (0.1 and 0.5 mg/kg), and resulted in recoveries in the range of 78-107%, with RSD values between 1.6 and 8.0% for (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] sorbent. Detection and quantification limits ranged from 0.02 to 0.05 mg/kg and from 0.05 to 0.10 mg/kg, respectively, for the different pesticides studied. The method developed was linear over the range tested (0.05-10.0 µg/mL), with correlation coefficients ranging from 0.9990 to 0.9997. Comparison between (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] and conventional sorbent (silica gel) showed better performance of the (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] polymeric sorbent for all pesticides tested.

A matrix solid-phase dispersion method for the extraction of seven pesticides from mango and papaya.

A simple and effective extraction method based on matrix solid-phase dispersion was developed to determine trichlorfon, pyrimethanil, methyl parathion, tetraconazole, thiabendazole, imazalil, and tebuconazole in papaya and mango using gas chromatography-mass spectrometry with selected ion monitoring. Different parameters of the method were evaluated, such as type of solid-phase (silica-gel, neutral alumina, and Florisil), the amount of solid-phase, and eluent [dichloromethane, ethyl acetate-dichloromethane (4:1, 1:4, 1:1, 2:3, v/v)]. The best results were obtained using 2.0 g of mango or papaya, 3.0 g of silica as dispersant sorbent, and ethyl acetate-dichloromethane (1:1, v/v) as eluting solvent. The method was validated using mango and papaya samples fortified with pesticides at different concentration levels (0.05, 0.10, and 1.0 mg/kg). Average recoveries (4 replicates) ranged from 80% to 146%, with relative standard deviations between 1.0% and 28%. Detection and quantification limits for mango and papaya ranged from 0.01 to 0.03 mg/kg and 0.05 to 0.10 mg/kg, respectively. The proposed method was applied to the analysis of these compounds in commercial fruit samples from a local market (Aracaju/SE, Brazil), and residues of the pesticides were not detected on the samples.

Multiresidue determination of carbamate, organochlorine, organophosphorus, and dicarboximide pesticides in lettuce by GC/MS.

An extraction method based on matrix solid-phase dispersion was developed to determine pirimicarb, methyl parathion, malathion, procymidone, alpha-endosulfan and beta-endosulfan in lettuce using gas chromatography-mass spectrometry. The best results were obtained using 4.0 g of lettuce, 2.0 g of silica as dispersant sorbent, 0.1 g of activated carbon as clean up sorbent and acetonitrile as eluting solvent. The method was validated using lettuce samples fortified with pesticides at six different concentration levels (0.1 to 2.0 mg/kg). Average recoveries (7 replicates) ranged from 50 to 120%, with relative standard deviations between 0.6 and 8.0%. Detection and quantification limits for lettuce ranged from 0.01 to 0.02 mg/kg and 0.04 to 0.10 mg/kg, respectively.

Determination of six pesticides in the medicinal herb Cordia salicifolia by matrix solid-phase dispersion and gas chromatography/mass spectrometry.

A simple and effective extraction method based on matrix solid-phase dispersion was developed for acephate, chlorpropham, pyrimicarb, bifenthrin, tetradifon, and phosalone in leaves of the medicinal plant Cordia salicifolia, whose extracts are commercialized in Brazil as diuretic, appetite suppressant, and weight loss products. The determination method was GC/MS with selected-ion monitoring. Different parameters of the method were evaluated, such as type of solid phase (C18, alumina, silica gel, and Florisil) and the amount of solid phase and eluent (dichloromethane, ethyl acetate, chloroform, and cyclohexane). The best results were obtained using 0.5 g herb sample, 0.5 g neutral alumina as the dispersant sorbent, 0.5 g C18 as the cleanup sorbent, and cyclohexane-dichloromethane (3 + 1, v/v) as the eluting solvent. The method was validated using herb samples fortified with pesticides at different concentration levels (0.3, 0.5, and 1.0 mg/kg). Average recoveries (seven replicates) ranged from 67.7 to 129.9%, with relative standard deviations between 6.3 and 26%. Detection and quantitation limits for the herb ranged from 0.10 to 0.15 and 0.15 to 0.25 mg/kg, respectively.

Two-dimensional coordination polymer matrix for solid-phase extraction of pesticide residues from plant Cordia salicifolia.

The 2D coordination polymer (infinity[Gd(DPA)(HDPA)]) was tested for extraction of acephate, chlorpropham, pirimicarb, bifenthrin, tetradifon, and phosalone from the medicinal plant Cordia salicifolia, whose extracts are commercialized in Brazil as diuretic, appetite suppressant, and weight loss products, using GC/MS, SIM. Considering that there are no Brazilian regulations concerning maximum permissible pesticide residue concentrations in medicinal herbs, recovery experiments were carried out (seven replicates), at two arbitrary fortification levels (0.5 and 1.0 mg/kg), resulting in recoveries in range of 20 to 107.7% and SDRSDs were between 5.6 and 29.1% for infinity[Gd(DPA)(HDPA)] sorbent. Detection and quantification limits for herb ranged from 0.10 to 0.15 mg/kg and from 0.15 to 0.25 mg/kg, respectively, for the different pesticides studied. The developed method is linear over the range assayed, 0.5-10.0 microg/mL, with correlation coefficients ranging from 0.9975 to 0.9986 for all pesticides. Comparison between infinity[Gd(DPA)(HDPA)] sorbent and conventional sorbent (neutral alumina) showed similar performance of infinity[Gd(DPA)(HDPA)] polymeric sorbent for three (bifenthrin, tetradifon, and phosalone) out of six pesticides tested.

Simultaneous determination of eight pesticide residues in coconut using MSPD and GC/MS.

A simple and effective extraction method based on matrix solid-phase dispersion (MSPD) was developed to determine dimethoate, malathion, lufenuron, carbofuran, 3-hydroxycarbofuran, thiabendazole, difenoconazole and trichlorfon in coconut pulp using gas chromatography-mass spectrometry with selected ion monitoring (GC/MS, SIM). Different parameters of the method were evaluated, such as type of solid-phase (C(18), alumina, silica-gel and Florisil), the amount of solid-phase and eluent (dichloromethane, acetone, ethyl acetate, acetonitrile, n-hexane and n-hexane:ethyl acetate (1:1, v/v)). The best results were obtained using 0.5 g of coconut pulp, 1.0 g of C(18) as dispersant sorbent, 1.0 g of Florisil as clean-up sorbent and acetonitrile saturated with n-hexane as eluting solvent. The method was validated using coconut pulp samples fortified with pesticides at different concentration levels (0.25-1.0 mg kg(-1)). Average recoveries (four replicates) ranged from 70.1% to 98.7%, with relative standard deviations between 2.7% and 14.7%, except for lufenuron and difenoconazole, for which recoveries were 47.2% and 48.2%, respectively. Detection and quantification limits for coconut pulp ranged from 0.02 to 0.17 mg kg(-1) and from 0.15 to 0.25 mg kg(-1), respectively.

Multivariate optimization of a solid phase microextraction-headspace procedure for the determination of benzene, toluene, ethylbenzene and xylenes in effluent samples from a waste treatment plant.

A method based on solid-phase microextraction (SPME) and gas chromatography with flame ionization detection (GC-FID) has been optimized for the determination of benzene, toluene, ethylbenzene and xylenes (BTEX) in water released from a waste treatment plant. The extraction step was optimized using fractional factorial and central composite designs including the following experimental factors: saline concentration; extraction time; desorption time; agitation velocity; headspace volume. A multiple function was used to describe the experimental conditions for simultaneous extraction of the compounds. The procedure, based on direct SPME at 50 degrees C, using a polydimethylsiloxane fiber, showed good linearity (r>0.997 over a concentration range 2-200 microg L(-1)) and repeatability (relative standard deviation (RSD)<4.23%) for all compounds, with limits of detection ranging from 0.05 to 0.28 microg L(-1), and limits of quantification ranging from 0.14 to 0.84 microg L(-1). Concentrations of the target compounds in these samples were between 145.8 and 1891 microg L(-1).