Spatiotemporal oxygen sensing using dual emissive boron dye-polylactide nanofibers.

Oxygenation in tissue scaffolds continues to be a limiting factor in regenerative medicine despite efforts to induce neovascularization or to use oxygen-generating materials. Unfortunately, many established methods to measure oxygen concentration, such as using electrodes, require mechanical disturbance of the tissue structure. To address the need for scaffold-based oxygen concentration monitoring, a single-component, self-referenced oxygen sensor was made into nanofibers. Electrospinning process parameters were tuned to produce a biomaterial scaffold with specific morphological features. The ratio of an oxygen sensitive phosphorescence signal to an oxygen insensitive fluorescence signal was calculated at each image pixel to determine an oxygenation value. A single component boron dye-polymer conjugate was chosen for additional investigation due to improved resistance to degradation in aqueous media compared to a boron dye polymer blend. Standardization curves show that in fully supplemented media, the fibers are responsive to dissolved oxygen concentrations less than 15 ppm. Spatial (millimeters) and temporal (minutes) ratiometric gradients were observed in vitro radiating outward from the center of a dense adherent cell grouping on scaffolds. Sensor activation in ischemia and cell transplant models in vivo show oxygenation decreases on the scale of minutes. The nanofiber construct offers a robust approach to biomaterial scaffold oxygen sensing.

Laminin- and basement membrane-polycaprolactone blend nanofibers as a scaffold for regenerative medicine.

Mimicking one or more components of the basement membrane (BM) holds great promise for overcoming insufficiencies in tissue engineering therapies. We have electrospun laminin nanofibers (NFs) isolated from the murine Engelbreth-Holm Swarm (EHS) tumor and evaluated them as a scaffold for embryonic stem cell culture. Seeded human embryonic stem cells were found to better maintain their undifferentiated, colony environment when cultured on laminin NFs compared to laminin mats, with 75% remaining undifferentiated on NFs. Mouse embryonic stem cells cultured on 10% laminin-polycaprolactone (PCL) NFs maintained their colony formation for twice as long without passage compared to those on PCL or gelatin substrates. In addition, we have established a protocol for electrospinning reconstituted basement membrane aligned (RBM)-PCL NFs within 10° of angular deviation. Neuron-like PC12 cells show significantly greater attachment (p < 0.001) and percentage of neurite-extending cells in vitro on 10% RBM-PCL NFs when compared to 1% and 0% RBM-PCL NFs (p < 0.015 and p < 0.001, respectively). Together, these results implicate laminin- and RBM-PCL scaffolds as a promising biomimetic substrate for regenerative medicine applications.

Three-dimensional elastomeric scaffolds designed with cardiac-mimetic structural and mechanical features.

Tissue-engineered constructs, at the interface of material science, biology, engineering, and medicine, have the capacity to improve outcomes for cardiac patients by providing living cells and degradable biomaterials that can regenerate the native myocardium. With an ultimate goal of both delivering cells and providing mechanical support to the healing heart, we designed three-dimensional (3D) elastomeric scaffolds with (1) stiffnesses and anisotropy mimicking explanted myocardial specimens as predicted by finite-element (FE) modeling, (2) systematically varied combinations of rectangular pore pattern, pore aspect ratio, and strut width, and (3) structural features approaching tissue scale. Based on predicted mechanical properties, three scaffold designs were selected from eight candidates for fabrication from poly(glycerol sebacate) by micromolding from silicon wafers. Large 20×20 mm scaffolds with high aspect ratio features (5:1 strut height:strut width) were reproducibly cast, cured, and demolded at a relatively high throughput. Empirically measured mechanical properties demonstrated that scaffolds were cardiac mimetic and validated FE model predictions. Two-layered scaffolds providing fully interconnected pore networks were fabricated by layer-by-layer assembly. C2C12 myoblasts cultured on one-layered scaffolds exhibited specific patterns of cell elongation and interconnectivity that appeared to be guided by the scaffold pore pattern. Neonatal rat heart cells cultured on two-layered scaffolds for 1 week were contractile, both spontaneously and in response to electrical stimulation, and expressed sarcomeric α-actinin, a cardiac biomarker. This work not only demonstrated several scaffold designs that promoted functional assembly of rat heart cells, but also provided the foundation for further computational and empirical investigations of 3D elastomeric scaffolds for cardiac tissue engineering.

Alignment and composition of laminin-polycaprolactone nanofiber blends enhance peripheral nerve regeneration.

Peripheral nerve transection occurs commonly in traumatic injury, causing deficits distal to the injury site. Conduits for repair currently on the market are hollow tubes; however, they often fail due to slow regeneration over long gaps. To facilitate increased regeneration speed and functional recovery, the ideal conduit should provide biochemically relevant signals and physical guidance cues, thus playing an active role in regeneration. To that end, laminin and laminin-polycaprolactone (PCL) blend nanofibers were fabricated to mimic peripheral nerve basement membrane. In vitro assays established 10% (wt) laminin content is sufficient to retain neurite-promoting effects of laminin. In addition, modified collector plate design to introduce an insulating gap enabled the fabrication of aligned nanofibers. The effects of laminin content and fiber orientation were evaluated in rat tibial nerve defect model. The lumens of conduits were filled with nanofiber meshes of varying laminin content and alignment to assess changes in motor and sensory recovery. Retrograde nerve conduction speed at 6 weeks was significantly faster in animals receiving aligned nanofiber conduits than in those receiving random nanofiber conduits. Animals receiving nanofiber-filled conduits showed some conduction in both anterograde and retrograde directions, whereas in animals receiving hollow conduits, no impulse conduction was detected. Aligned PCL nanofibers significantly improved motor function; aligned laminin blend nanofibers yielded the best sensory function recovery. In both cases, nanofiber-filled conduits resulted in better functional recovery than hollow conduits. These studies provide a firm foundation for the use of natural-synthetic blend electrospun nanofibers to enhance existing hollow nerve guidance conduits.

The use of surface modified poly(glycerol-co-sebacic acid) in retinal transplantation.

Retinal transplantation experiments have advanced considerably during recent years, but remaining diseased photoreceptor cells in the host retina and inner retinal cells in the transplant physically obstruct the development of graft-host neuronal contacts which are required for vision. Recently, we developed methods for the isolation of donor photoreceptor layers in vitro, and the selective removal of host photoreceptors in vivo using biodegradable elastomeric membranes composed of poly(glycerol-co-sebacic acid) (PGS). Here, we report the surface modification of PGS membranes to promote the attachment of photoreceptor layers, allowing the resulting composite to be handled surgically as a single entity. PGS membranes were chemically modified with peptides containing an arginine-glycine-aspartic acid (RGD) extracellular matrix ligand sequence. PGS membranes were also coated with electrospun nanofiber meshes, containing laminin and poly(epsilon-caprolactone) (PCL). Following in vitro co-culture of biomaterial membranes with isolated embryonic retinal tissue, composites were tested for surgical handling and examined with hematoxylin and eosin staining and immunohistochemical markers. Electrospun nanofibers composed of laminin and PCL promoted sufficient cell adhesion for simultaneous transplantation of isolated photoreceptor layers and PGS membranes. Composites developed large populations of recoverin and rhodopsin labeled photoreceptors. Furthermore, ganglion cells, rod bipolar cells and AII amacrine cells were absent in co-cultured retinas as observed by neurofilament, PKC and parvalbumin labeling respectively. These results facilitate retinal transplantation experiments in which a composite graft composed of a biodegradable membrane adhered to an immature retina dominated by photoreceptor cells may be delivered in a single surgery, with the possibility of improving graft-host neuronal connections.

Phthalimide neovascular factor 1 (PNF1) modulates MT1-MMP activity in human microvascular endothelial cells.

We are creating synthetic pharmaceuticals with angiogenic activity and potential to promote vascular invasion. We previously demonstrated that one of these molecules, phthalimide neovascular factor 1 (PNF1), significantly expands microvascular networks in vivo following sustained release from poly(lactic-co-glycolic acid) (PLAGA) films. In addition, to probe PNF1 mode of action, we recently applied a novel pathway-based compendium analysis to a multi-timepoint, controlled microarray data set of PNF1-treated (vs. control) human microvascular endothelial cells (HMVECs), and we identified induction of tumor necrosis factor-alpha (TNF-alpha) and, subsequently, transforming growth factor-beta (TGF-beta) signaling networks by PNF1. Here we validate this microarray data set with quantitative real-time polymerase chain reaction (RT-PCR) analysis. Subsequently, we probe this data set and identify three specific TGF-beta-induced genes with regulation by PNF1 conserved over multiple timepoints-amyloid beta (A4) precursor protein (APP), early growth response 1 (EGR-1), and matrix metalloproteinase 14 (MMP14 or MT1-MMP)-that are also implicated in angiogenesis. We further focus on MMP14 given its unique role in angiogenesis, and we validate MT1-MMP modulation by PNF1 with an in vitro fluorescence assay that demonstrates the direct effects that PNF1 exerts on functional metalloproteinase activity. We also utilize endothelial cord formation in collagen gels to show that PNF1-induced stimulation of endothelial cord network formation in vitro is in some way MT1-MMP-dependent. Ultimately, this new network analysis of our transcriptional footprint characterizing PNF1 activity 1-48 h post-supplementation in HMVECs coupled with corresponding validating experiments suggests a key set of a few specific targets that are involved in PNF1 mode of action and important for successful promotion of the neovascularization that we have observed by the drug in vivo.

Laminin nanofiber meshes that mimic morphological properties and bioactivity of basement membranes.

The basement membrane protein, laminin I, has been used broadly as a planar two-dimensional film or in a three-dimensional form as a reconstituted basement membrane gel such as Matrigel to support cellular attachment, growth, and differentiation in vitro. In basement membranes in vivo, laminin exhibits a fibrillar morphology, highlighting the electrospinning process as an ideal method to recreate such fibrous substrates in vitro. Electrospinning was employed to fabricate meshes of murine laminin I nanofibers (LNFs) with fiber size, geometry, and porosity of authentic basement membranes. Purified laminin I was solubilized and electrospun in parametric studies of fiber diameters as a function of polymer solution concentration, collecting distance, and flow rate. Resulting fiber diameters ranged from 90 to 300 nm with mesh morphologies containing beads. Unlike previously described nanofibers (NFs) synthesized from proteins such as collagen, meshes of LNFs retain their structural features when wetted and do not require fixation by chemical crosslinking, which often destroys cell attachment and other biological activity. The LNF meshes maintained their geometry for at least 2 days in culture without chemical crosslinking. PC12 cells extended neurites without nerve growth factor stimulation on LNF substrates. Additionally, LNFs significantly enhance both the rate and quantity of attachment of human adipose stem cells (ASCs) compared to laminin films. ASCs were viable and maintained attachment to LNF meshes in serum-free media for at least 3 days in culture and extended neurite-like processes after 24 h in serum-free media conditions without media additives to induce differentiation. LNF meshes are a novel substrate for cell studies in vitro, whose properties may be an excellent scaffold material for delivering cells in tissue engineering applications in vivo.

Nanomedicine: Addressing Cardiovascular Disease and Cardiovascular Tissue Regeneration.

Cardiovascular disease is becoming an increasingly significant problem. In attempts to overcome many of the traditional hurdles of cardiovascular disease treatment, therapeutic approaches have been gradually moving beyond an exclusive focus on orally delivered drugs towards the development of nanoscale applications. These technologies exploit molecular scale events to improve drug and gene delivery applications, enhance preventative medicine and diagnostic strategies, and create biomimicking substrates for vascular tissue engineering. As nanoscale treatments enter the arena of clinical medicine, new ways of thinking about and routes for applying nanomedicine to cardiovascular health issues are emerging. With focuses on drug delivery, gene therapy, and biomimetics, this article will provide a comprehensive review of various nanomedicine applications for combating atherosclerosis and for improving upon current vascular tissue engineering designs.

Collagen nanofibres are a biomimetic substrate for the serum-free osteogenic differentiation of human adipose stem cells.

Electrospinning has recently gained widespread attention as a process capable of producing nanoscale fibres that mimic native extracellular matrix. In this study, we compared the osteogenic differentiation behaviour of human adipose stem cells (ASCs) on a 3D nanofibre matrix of type I rat tail collagen (RTC) and a 2D RTC collagen-coated substrate, using a novel serum-free osteogenic medium. The serum-free medium significantly enhanced the numbers of proliferating cells in culture, compared to ASCs in traditional basal medium containing 10% animal serum, highlighting a potential clinical role for in vitro stem cell expansion. Osteogenic differentiation behaviour was assessed at days 7, 14 and 21 using quantitative real-time RT-PCR analysis of the osteogenic genes collagen I (Coll I), alkaline phosphatase (ALP), osteopontin (OP), osteonectin (ON), osteocalcin (OC) and core-binding factor-alpha (cbfa1). All genes were upregulated (>one-fold) in ASCs cultured on nanofibre scaffolds over 2D collagen coatings by day 21. Synthesis of mineralized extracellular matrix on the scaffolds was assessed on day 21 with Alizarin red staining. These studies demonstrate that 3D nanoscale morphology plays a critical role in regulating cell fate processes and in vitro osteogenic differentiation of ASCs under serum-free conditions.