An advanced fast method for the evaluation of multiple immunolabelling using gold nanoparticles based on low-energy STEM.

We present a powerful method for the simultaneous detection of Au nanoparticles located on both sides of ultrathin sections. The method employs a high-resolution scanning electron microscope (HRSEM) operating in scanning transmission electron microscopy (STEM) mode in combination with the detection of backscattered electrons (BSE). The images are recorded simultaneously during STEM and BSE imaging at the precisely selected accelerating voltage. Under proper imaging conditions, the positions of Au nanoparticles on the top or bottom sides can be clearly differentiated, hence showing this method to be suitable for multiple immunolabelling using Au nanoparticles (NPs) as markers. The difference between the upper and lower Au NPs is so large that it is possible to apply common software tools (such as ImageJ) to enable their automatic differentiation. The effects of the section thickness, detector settings and accelerating voltage on the resulting image are shown. Our experimental results correspond to the results modelled in silico by Monte Carlo (MC) simulations.

Microscopic morphology and distribution of the antennal sensilla in the double-spined bark beetle, Ips duplicatus (Coleoptera: Curculionidae).

The double-spined spruce bark beetle, Ips duplicatus, has become an infamous secondary pest of Norway spruce, causing extensive ecological and economic destruction in many Central European countries. Antennae are the primary olfactory organs that play a fundamental role in insect-host chemical communication; therefore, understanding morphology is crucial before conducting electrophysiological investigations. Here, we present our analysis of sensilla types on the antennal surface of I. duplicatus for the first time, using high-resolution-scanning electron microscopy. We studied the external morphological characteristics of antennae and the types, numbers, and distribution of the antennal sensilla in males and females. Our results revealed the presence of five different types of morphologically distinct sensilla: sensilla chaetica, sensilla basiconica, sensilla trichodea, sensilla coeloconica, and Böhm's sensilla. We observed two subtypes of sensilla chaetica (SChI and SChII), four subtypes of sensilla basiconica (SBI, SBII, SBIII, and SBIV), three subtypes of sensilla trichodea (STrII, STrIII, and STrIV) and two subtypes of sensilla coeloconica (SCoI and SCoII), respectively in I. duplicatus males and females. Minor differences in length and numbers between the sexes for some sensilla types were found. Distribution maps for different sensillar types were constructed, and specific areas for the respective sensilla were found. Possible functions of observed sensilla types are discussed. The present study provides a basis for future electrophysiological studies to understand how I. duplicatus detects ecologically important olfactory cues. RESEARCH HIGHLIGHTS: • The first report of morphology and distribution pattern of the antennal sensilla in Ips duplicatus is discussed. • A total of 6 main types and 11 antennal sensilla subtypes were observed in male and female Ips duplicatus. • Minor sex-specific differences were seen in the length and numbers in several sensilla types.

Diverse eukaryotic phytoplankton from around the Marquesas Islands documented by combined microscopy and molecular techniques.

Oceanic phytoplankton serve as a base for the food webs within the largest planetary ecosystem. Despite this, surprisingly little is known about species composition, function and ecology of phytoplankton communities, especially for vast areas of the open ocean. In this study we focus on the marine phytoplankton microflora from the vicinity of the Marquesas Islands in the Southern Pacific Ocean collected during the Tara Oceans expedition. Multiple samples from four sites and two depths were studied in detail using light microscopy, scanning electron microscopy, and automated confocal laser scanning microscopy. In total 289 taxa were identified, with Dinophyceae and Bacillariophyceae contributing 60% and 32% of taxa, respectively, to phytoplankton community composition. Notwithstanding, a large number of cells could not be assigned to any known species. Coccolithophores and other flagellates together contributed less than 8% to the species list. Observed cell densities were generally low, but at sites of high autotrophic biomass, diatoms reached the highest cell densities (1.26 × 104 cells L-1). Overall, 18S rRNA metabarcode-based community compositions matched microscopy-based estimates, particularly for the main diatom taxa, indicating consistency and complementarity between different methods, while the wide range of microscopy-based methods permitted several unknown and poorly studied taxa to be revealed and identified.

Selective and reversible disruption of mitochondrial inner membrane protein complexes by lipophilic cations.

Triphenylphosphonium (TPP) derivatives are commonly used to target chemical into mitochondria. We show that alkyl-TPP cause reversible, dose- and hydrophobicity-dependent alterations of mitochondrial morphology and function and a selective decrease of mitochondrial inner membrane proteins including subunits of the respiratory chain complexes, as well as components of the mitochondrial calcium uniporter complex. The treatment with alkyl-TPP resulted in the cleavage of the pro-fusion and cristae organisation regulator Optic atrophy-1. The structural and functional effects of alkyl-TPP were found to be reversible and not merely due to loss of membrane potential. A similar effect was observed with the mitochondria-targeted antioxidant MitoQ.

Cathodoluminescence imaging of cellular structures labeled with luminescent iridium or rhenium complexes at cryogenic temperatures.

We report for the first time the use of two live-cell imaging agents from the group of luminescent transition metal complexes (IRAZOLVE-MITO and REZOLVE-ER) as cathodoluminescent probes. This first experimental demonstration shows the application of both probes for the identification of cellular structures at the nanoscale and near the native state directly in the cryo-scanning electron microscope. This approach can potentially be applied to correlative and multimodal approaches and used to target specific regions within vitrified samples at low electron beam energies.

The role of polyhydroxyalkanoates in adaptation of Cupriavidus necator to osmotic pressure and high concentration of copper ions.

Polyhydroxyalkanoates (PHA) are abundant microbial polyesters accumulated in the form of intracellular granules by numerous prokaryotes primarily as storage of carbon and energy. Apart from their storage function, the presence of PHA also enhances the robustness of the microbial cells against various stressors. In this work, we investigated the role of PHA in Cupriavidus necator, a model organism concerning PHA metabolism, for adaptation to osmotic pressure and copper ions. In long-term laboratory evolution experiments, the bacterial culture was cultivated in presence of elevated doses of sodium chloride or copper ions (incubations lasted 78 passages for Cu2+ and 68 passages for NaCl) and the evolved strains were compared with the wild-type strain in terms of growth and PHA production capacity, cell morphology (investigated by various electron microscopy techniques), activities of selected enzymes involved in PHA metabolism and other crucial metabolic pathways, the chemical composition of bacterial biomass (determined by infrared and Raman spectroscopy) and also considering robustness against various stressors. The results confirmed the important role of PHA metabolism for adaptation to both tested stressors.

Biotechnological Conversion of Grape Pomace to Poly(3-hydroxybutyrate) by Moderately Thermophilic Bacterium Tepidimonas taiwanensis.

Polyhydroxyalkanoates (PHA) are microbial polyesters that have recently come to the forefront of interest due to their biodegradability and production from renewable sources. A potential increase in competitiveness of PHA production process comes with a combination of the use of thermophilic bacteria with the mutual use of waste substrates. In this work, the thermophilic bacterium Tepidimonas taiwanensis LMG 22826 was identified as a promising PHA producer. The ability to produce PHA in T. taiwanensis was studied both on genotype and phenotype levels. The gene encoding the Class I PHA synthase, a crucial enzyme in PHA synthesis, was detected both by genome database search and by PCR. The microbial culture of T. taiwanensis was capable of efficient utilization of glucose and fructose. When cultivated on glucose as the only carbon source at 50 °C, the PHA titers reached up to 3.55 g/L, and PHA content in cell dry mass was 65%. The preference of fructose and glucose opens the possibility to employ T. taiwanensis for PHA production on various food wastes rich in these abundant sugars. In this work, PHA production on grape pomace extracts was successfully tested.

The First Insight into Polyhydroxyalkanoates Accumulation in Multi-Extremophilic Rubrobacter xylanophilus and Rubrobacter spartanus.

Actinobacteria belonging to the genus Rubrobacter are known for their multi-extremophilic growth conditions-they are highly radiation-resistant, halotolerant, thermotolerant or even thermophilic. This work demonstrates that the members of the genus are capable of accumulating polyhydroxyalkanoates (PHA) since PHA-related genes are widely distributed among Rubrobacter spp. whose complete genome sequences are available in public databases. Interestingly, all Rubrobacter strains possess both class I and class III synthases (PhaC). We have experimentally investigated the PHA accumulation in two thermophilic species, R. xylanophilus and R. spartanus. The PHA content in both strains reached up to 50% of the cell dry mass, both bacteria were able to accumulate PHA consisting of 3-hydroxybutyrate and 3-hydroxyvalerate monomeric units, none other monomers were incorporated into the polymer chain. The capability of PHA accumulation likely contributes to the multi-extremophilic characteristics since it is known that PHA substantially enhances the stress robustness of bacteria. Hence, PHA can be considered as extremolytes enabling adaptation to extreme conditions. Furthermore, due to the high PHA content in biomass, a wide range of utilizable substrates, Gram-stain positivity, and thermophilic features, the Rubrobacter species, in particular Rubrobacter xylanophilus, could be also interesting candidates for industrial production of PHA within the concept of Next-Generation Industrial Biotechnology.

Nanomechanical mechanisms of Lyme disease spirochete motility enhancement in extracellular matrix.

As opposed to pathogens passively circulating in the body fluids of their host, pathogenic species within the Spirochetes phylum are able to actively coordinate their movement in the host to cause systemic infections. Based on the unique morphology and high motility of spirochetes, we hypothesized that their surface adhesive molecules might be suitably adapted to aid in their dissemination strategies. Designing a system that mimics natural environmental signals, which many spirochetes face during their infectious cycle, we observed that a subset of their surface proteins, particularly Decorin binding protein (Dbp) A/B, can strongly enhance the motility of spirochetes in the extracellular matrix of the host. Using single-molecule force spectroscopy, we disentangled the mechanistic details of DbpA/B and decorin/laminin interactions. Our results show that spirochetes are able to leverage a wide variety of adhesion strategies through force-tuning transient molecular binding to extracellular matrix components, which concertedly enhance spirochetal dissemination through the host.

Spermiogenesis produces the spermatozoa with 9 + '1' and 9 + 0 axonemal pattern in progenetic cestode Diplocotyle olrikii Krabbe, 1874 (Spathebothriidea: Acrobothriidae).

Spermiogenesis in the progenetic spathebothriidean cestode Diplocotyle olrikii has been examined using transmission electron microscopy (TEM) for the first time. Along with the typical features of spermatozoon cytodifferentiation (e.g., the electron-dense material in the apical region of the differentiation zone in the early stage of spermiogenesis, the intercentriolar body which is composed of three electron-dense plates and two electron-lucent zones, the orthogonal development of the two flagella, a flagellar rotation, proximo-distal fusion, the presence of two pairs of electron-dense attachment zones), new for the Eucestoda is detection of the formation of two types of free flagella during spermiogenesis in progenetic D. olrikii, exhibiting either standard 9 + '1' trepaxonematan pattern, or atypical 9 + 0 structure. Various combinations of these two types of flagella resulted in the production of three types of male gametes during spermiogenesis in this spathebothriidean cestode. The first type is represented with the two axonemes of the 9 + '1' structure; the second type exhibits two different axonemes, i.e., one with 9 + '1' and the other of 9 + 0 pattern; and the third type has two axonemes with atypical 9 + 0 structure. The occurrence of three sperm types in progenetic D. olrikii is associated with typical spermiogenesis and has never been described previously in the Platyhelminthes. We suppose that heteromorphism of male gametes in D. olrikii might be linked to progenesis, i.e., the programmed sexual maturation detected during the larval/developmental stage of an organism.

Introducing the Newly Isolated Bacterium Aneurinibacillus sp. H1 as an Auspicious Thermophilic Producer of Various Polyhydroxyalkanoates (PHA) Copolymers-2. Material Study on the Produced Copolymers.

Aneurinibacillus sp. H1 is a promising, moderately thermophilic, novel Gram-positive bacterium capable of the biosynthesis of polyhydroxyalkanoates (PHA) with tunable monomer composition. In particular, the strain is able to synthesize copolymers of 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB) and 3-hydroxyvalerate (3HV) with remarkably high 4HB and 3HV fractions. In this study we performed an in-depth material analysis of PHA polymers produced by Aneurinibacillus sp. H1 in order to describe how the monomer composition affects fundamental structural and physicochemical parameters of the materials in the form of solvent-casted films. Results of infrared spectroscopy, X-ray diffractometry and thermal analysis clearly show that controlling the monomer composition enables optimization of PHA crystallinity both qualitatively (the type of the crystalline lattice) and quantitatively (the overall degree of crystallinity). Furthermore, resistance of the films against thermal and/or enzymatic degradation can also be manipulated by the monomer composition. Results of this study hence confirm Aneurinibacillus sp. H1 as an auspicious candidate for thermophilic production of PHA polymers with material properties that can be tuned together with their chemical composition by the corresponding adjustment of the cultivation process.

Introducing the Newly Isolated Bacterium Aneurinibacillus sp. H1 as an Auspicious Thermophilic Producer of Various Polyhydroxyalkanoates (PHA) Copolymers-1. Isolation and Characterization of the Bacterium.

Extremophilic microorganisms are considered being very promising candidates for biotechnological production of various products including polyhydroxyalkanoates (PHA). The aim of this work was to evaluate the PHA production potential of a novel PHA-producing thermophilic Gram-positive isolate Aneurinibacillus sp. H1. This organism was capable of efficient conversion of glycerol into poly(3-hydroxybutyrate) (P3HB), the homopolyester of 3-hydroxybutyrate (3HB). In flasks experiment, under optimal cultivation temperature of 45 °C, the P3HB content in biomass and P3HB titers reached 55.31% of cell dry mass and 2.03 g/L, respectively. Further, the isolate was capable of biosynthesis of PHA copolymers and terpolymers containing high molar fractions of 3-hydroxyvalerate (3HV) and 4-hydroxybutyrate (4HB). Especially 4HB contents in PHA were very high (up to 91 mol %) when 1,4-butanediol was used as a substrate. Based on these results, it can be stated that Aneurinibacillus sp. H1 is a very promising candidate for production of PHA with tailored material properties.

Three-dimensional reconstruction of the feeding apparatus of the tick Ixodes ricinus (Acari: Ixodidae): a new insight into the mechanism of blood-feeding.

The different components of the mouthparts of hard ticks (Ixodidae) enable these parasites to penetrate host skin, secrete saliva, embed, and suck blood. Moreover, the tick's mouthparts represent a key route for saliva-assisted pathogen transmission as well as pathogen acquisition from blood meal during the tick feeding process. Much has been learned about the basic anatomy of the tick's mouthparts and in the broad outlines of how they function in previous studies. However, the precise mechanics of these functions are little understood. Here, we propose for the first time an animated model of the orchestration of the tick mouthparts and associated structures during blood meal acquisition and salivation. These two actions are known to alternate during tick engorgement. Specifically, our attention has been paid to the mechanism underlining the blood meal uptake into the pharynx through the mouth  and how ticks prevent mixing the uptaken blood with secreted saliva. We animated function of muscles attached to the salivarium and their possible opening /closing of the salivarium, with a plausible explanation of the movement of saliva within the salivarium and massive outpouring of saliva.

Heteromorphism of sperm axonemes in a parasitic flatworm, progenetic Diplocotyle olrikii Krabbe, 1874 (Cestoda, Spathebothriidea).

The spermatozoon ultrastructure of the progenetic cestode Diplocotyle olrikii (Spathebothriidea) has been examined using transmission electron microscopy and cytochemical staining with periodic acid-thiosemicarbazide-silver proteinate (PA-TSC-SP) for glycogen. The spermatozoon is a filiform cell, tapered at both extremities. Its moderately electron-dense cytoplasm possesses two parallel axonemes of unequal lengths. New for the Cestoda is a finding of three types of the mature spermatozoa with respect to different axonemal structure. The first type has both axonemes with standard 9 + '1' trepaxonematan pattern. The second type is represented by a spermatozoon having one axoneme with 9 + '1' structure and the second one with 9 + 0 pattern. The third type includes the two axonemes with 9 + 0 pattern. Microtubule doublets of the 9 + 0 axonemes contain either inner dynein arms or no dynein arms. In addition to the two axonemes, all three types of the mature sperm cells contain parallel nucleus, parallel cortical microtubules, four electron-dense plaques/attachment zones, and glycogen. The anterior extremity of the gamete exhibits a centriole surrounded by a semiarc of up to five electron-dense tubular structures. The distal end of the first type spermatozoa exhibits two morphological variants, represented either by (i) nucleus or (ii) remnants of the disorganized axoneme. Distal extremity of the spermatozoa of the second and third types contains doublets and singlets of disorganized axoneme. The ultrastructural characters of the spermatozoon of progenetic D. olrikii support the basal position of the Spathebothriidea within the Eucestoda.

New data on spermiogenesis and trepaxonematan axoneme in basal tapeworms (Cestoda, Caryophyllidea, Lytocestidae) parasitizing cyprinid fishes.

Monozoic caryophyllidean cestodes, intestinal parasites of cyprinid fishes, represent a group of tapeworms with an unclear evolutionary history. As spermatology may provide phylogenetically important data, the spermiogenesis and ultrastructure of the mature spermatozoon have been investigated using an integrative approach combining transmission electron microscopy, cytochemistry and electron tomography in Khawia rossittensis (Szidat, 1937). The process of spermatid formation is accompanied by the presence of ultrastructural characters not described in traditional models of spermiogenesis, e.g., apical electron-dense material, the two striated roots situated unusually opposite each other, branching of typical striated roots, an intercentriolar body comprising five electron-dense and four electron-lucent layers, rotation of both free flagella and flagellar buds to the median cytoplasmic process at 90°, and a complete proximodistal fusion. The synchronous rotation of both flagellar buds and growing free flagella is an evolutionarily linked pattern favouring the hypothesis that the Caryophyllidea are not ancestral but are secondarily derived from polyzoic forms. Electron tomography analysis has revealed a unique feature of two helicoidal tubular structures in the central electron-dense core of the axoneme of mature spermatozoon. These data provide new insights into the architecture of the 9 + '1' axoneme, which is shared by male gametes of all trepaxonematan Platyhelminthes.

Production of polyhydroxyalkanoates on waste frying oil employing selected Halomonas strains.

The aim of this work was to study the potential of selected Halomonas species for conversion of waste frying oil into polyhydroxyalkanoates (PHA). In total nine Halomonas strains were experimentally screened for their capability of PHA production. Among them, Halomonas neptunia and Halomonas hydrothermalis were identified as potent PHA producers. Initial concentration of NaCl was identified as parameter influencing PHA yields as well as molecular weight of the polymer. In addition, H. hydrothermalis was capable of biosynthesis of a copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate P(3HB-co-3HV). When valerate was utilized as a precursor, the 3HV fraction in the copolymer reached high values of 50.15 mol.%. PHA production on lipid substrates by Halomonas has not been reported so far. Bearing in mind all the positive aspects of employing extremophiles in industrial biotechnology, H. hydrothermalis seems to be a very interesting halophilic strain for production of PHA using lipid substrates.

Essential Methods of Plant Sample Preparation for High-Resolution Scanning Electron Microscopy at Room Temperature.

In this chapter, conventional techniques are described for the preparation of plant samples at room temperature before examination in the high resolution scanning electron microscopy. Protocols are given on how to collect, to fix, to dehydrate, and to dry plant samples. Subsequently, it is described how to stick them to stubs and cover with a thin conductive layer. These methods are suitable for a wide variety of plant specimens, ranging from microalgae to higher plants.

Ultrastructural mapping of salivary gland innervation in the tick Ixodes ricinus.

The salivary gland of hard ticks is a highly innervated tissue where multiple intertwined axonal projections enter each individual acini. In the present study, we investigated the ultrastructural architecture of axonal projections within granular salivary gland type II and III acini of Ixodes ricinus female. Using immunogold labeling, we specifically examined the associations of SIFamide neuropeptide, SIFamide receptor (SIFa_R), neuropeptide pigment dispersing factor (PDF), and the invertebrate-specific D1-like dopamine receptor (InvD1L), with acinar cells. In both acini types, SIFamide-positive axons were found to be in direct contact with either basal epithelial cells or a single adlumenal myoepithelial cell in close proximity to the either the acinar duct or its valve, respectively. Accordingly, SIFa_R staining correlated with SIFamide-positive axons in both basal epithelial and myoepithelial cells. Immunoreactivity for both InvD1L and PDF (type II acini exclusively) revealed positive axons radiating along the acinar lumen. These axons were primarily enclosed by the adlumenal myoepithelial cell plasma membrane and interstitial projections of ablumenal epithelial cells. Our study has revealed the detailed ultrastructure of I. ricinus salivary glands, and provides a solid baseline for a comprehensive understanding of the cell-axon interactions and their functions in this essential tick organ.

Quantitative STEM imaging of electron beam induced mass loss of epoxy resin sections.

In sample preparation of biological samples for electron microscopy, many types of embedding media are widely used. Unfortunately, none of them is perfectly resistant to beam induced damage. The article is focused on mass loss measuring of pure epoxy resin EMbed 812 that replaced Epon - the most widely used embedding resin for biological electron microscopy, in a form of ultrathin sections with thicknesses ranging from 30 to 100 nm. The STEM imaging was performed in a quantitative way which allowed us to estimate the mass loss directly up to the total dose of 3000 e-/nm2. For data acquisition we used SEM equipped with a commercial STEM detector working at a relatively low acceleration voltage of 30 kV. In this study we estimated the influence of various factors which can affect the endurance of the epoxy resin EMbed 812 ultrathin sections under an electron beam, such as the sample aging, differences between storing the samples in forms of ultrathin sections and whole blocks, ultrathin sections thicknesses, temperature of the sample, probe current, and one or two-sided carbon coating of ultrathin sections. The aim of this work is to investigate beam induced mass loss at electron energies of SEM and find out how to reduce the mass loss.