Promising application of probiotic microorganisms as Pickering emulsions stabilizers.

The purpose of this work was to study the ability of nineteen food-grade microorganisms as Pickering emulsion (PE) stabilizers. Medium-chain triacylglycerol (MCT) oil-in-water (50:50) PEs were fabricated by 10 wt% or 15 wt% of thermally-inactivated yeast, cocci, Bacillus spp. and lactobacilli cells. The characteristics of microorganisms related to "Pickering stabilization" including morphology, surface charge, interfacial tension, and "contact angle" were firstly studied. After that, the cells-stabilized PEs were characterized from both kinetic and thermodynamic viewpoints, microstructure and rheological properties. The interfacial tension and "contact angle" values of various microorganisms ranged from 16.33 to 38.31 mN/m, and from 15° to 106°, respectively. The mean droplet size of PEs ranged from 11.51 to 57.69 µm. Generally, the physical stability of cell-stabilized PEs followed this order: lactobacilli > Bacillus spp. > cocci > yeast. These variations were attributed to the morphology and cell wall composition. Increasing the microorganism concentration significantly increased the physical stability of PEs from a maximum of 12 days at 10 wt% to 35 days at 15 wt% as a result of better interface coverage. Shear-thinning and dominant elastic behaviors were observed in PEs. Physical stability was affected by the free energy of detachment. Therefore, food-grade microorganisms are suggested for stabilizing PEs.

Effects of natural antioxidants and high-energy fabrication methods on physical properties and oxidative stability of flaxseed oil-in-water nanoemulsions.

The effects of high-energy fabrication methods, namely high-pressure homogenization (HPH) and ultrasonication (US), on physicochemical properties of flaxseed oil-in-water nanoemulsions (FNEs) containing clove essential oil (CEO) and/or pomegranate peel extract (PPE) were studied during storage at 4 and 25 °C. Nanoemulsions with relatively similar average droplet size were prepared by HPH and/or US. An increase in droplet size was observed over time. Lower storage temperature and fabrication by US increased Ostwald ripening rate. Higher storage temperature and fabrication by US decreased the centrifugal stability of nanoemulsions. CEO revealed better antioxidant properties than PPE. The oxidative stability was evaluated by determining secondary oxidation products, and fatty acids profile. The absence of antioxidant, fabrication by US, and higher storage temperature decreased the oxidative stability of nanoemulsions. The results of this study might be helpful in controlling the oxidation of FNEs during long-term storage and in designing functional foods and beverages.

An Overview of Optical and Electrochemical Sensors and Biosensors for Analysis of Antioxidants in Food during the Last 5 Years.

Antioxidants are a group of healthy substances which are useful to human health because of their antihistaminic, anticancer, anti-inflammatory activity and inhibitory effect on the formation and the actions of reactive oxygen species. Generally, they are phenolic complexes present in plant-derived foods. Due to the valuable nutritional role of these mixtures, analysis and determining their amount in food is of particular importance. In recent years, many attempts have been made to supply uncomplicated, rapid, economical and user-friendly analytical approaches for the on-site detection and antioxidant capacity (AOC) determination of food antioxidants. In this regards, sensors and biosensors are regarded as favorable tools for antioxidant analysis because of their special features like high sensitivity, rapid detection time, ease of use, and ease of miniaturization. In this review, current five-year progresses in different types of optical and electrochemical sensors/biosensors for the analysis of antioxidants in foods are discussed and evaluated well. Moreover, advantages, limitations, and the potential for practical applications of each type of sensors/biosensors have been discussed. This review aims to prove how sensors/biosensors represent reliable alternatives to conventional methods for antioxidant analysis.

Semi-continuous production of xanthan in biofilm reactor using Xanthomonas campestris.

Semi-continuous production of xanthan gum using self-immobilized Xanthomonas campestris cells in biofilm reactors was studied. Fermentation was carried out using two different designs of biofilm reactor equipped with a) stainless-steel support (SSS) and b) polyethylene support (PES). Fermentation was performed in three cycles with refreshing the media at the beginning of each: cycle 1, 0-27 h; cycle 2, 27-54 h; and cycle 3, 54-78.5 h. Results showed that the glucose consumption and the pH reduction in the PES biofilm reactor was faster compared to the SSS biofilm reactor. Scanning electron microscopy showed that the SSS was capable to immobilize more cells during the growth of X. campestris. The maximum concentration of xanthan gum in the SSS biofilm reactor obtained after 27 h (3.47 ± 0.71 g/L), while the maximum concentration of xanthan in the PES biofilm reactor obtained after 78.5 h (3.21 ± 0.68 g/L). Thermal stability analysis of xanthan using differential scanning calorimetry showed the presence of two fractures attributed to dehydration and degradation of polymer. The thermogram represented both endothermal and exothermal behaviour of xanthan polymer. Furthermore, the functional groups and molecular structure of the xanthan produced in this study was evaluated using Fourier transform infrared spectrometry and also proton nuclear magnetic resonance. in addition, the surface tension of (0.2 %, w/v) xanthan gum solution was in a range of 52.16-56.5 mN/m. Rheological analysis of xanthan showed that the G' values were higher than the G″ in all frequencies demonstrating a relatively high elasticity of the produced xanthan gum.

Physicochemical properties of fish oil in water multilayer emulsions prepared by a mixture of whey protein isolate and water-soluble fraction of Farsi gum.

Physicochemical properties and storage stability of fish oil (FO) in water multilayer emulsions, stabilized with different mixtures of whey protein isolate (WPI) and water-soluble fraction of Farsi gum (WSFG), were studied under the effects of total biopolymer concentration (TBC), WSFG:WPI mixing ratio (MR) and pH for 1 month. pH reduction decreased the surface potential of dispersed droplets; however, an increase in the WSFG:WPI MR (at constant pH values corresponding to electrostatic interactions) significantly increased the absolute values of surface potential and hence the physical stability of emulsions. An increase in TBC increased droplet size and emulsion viscosity. The emulsion viscosity was also positively correlated with WSFG:WPI MR. During storage, higher values of TBC and WSFG:WPI MRs led to lower absorbance values. An increase in the WSFG:WPI MR and TBC significantly retarded the oxidation of emulsified FO.