Multiscale Length Structural Investigation and Thermoelectric Performance of Double-Filled Sr0.2Yb0.2Co4Sb12: An Exceptional Thermal Conductivity Reduction by Filler Segregation to the Grain Boundaries.

Among thermoelectric materials, skutterudites are the most prominent candidates in the mid-temperature range applications. In the multiple-filled Sr0.2Yb0.2Co4Sb12 skutterudite, with Sr and Yb as fillers, we have enhanced the thermoelectric performance of CoSb3 through the reduction of lattice thermal conductivity and the optimization of carrier concentration and electrical conductivity. The high-pressure synthesis of the double-filled derivative promotes filling fraction fluctuation. This is observed by high angular resolution synchrotron X-ray diffraction, showing a phase segregation that corresponds to an inhomogeneous distribution of the filler atoms, located at the 2a positions of the cubic space group Im3̅. In addition, scanning transmission electron microscopy (STEM) combined with EELS spectroscopy clearly shows a segregation of Sr atoms from the surface of the grains, which is compatible with the synchrotron X-ray powder diffraction results. Mean square displacement parameters analysis results in Einstein temperatures of ∼94 and ∼67 K for Sr and Yb, respectively, and a Debye temperature of ∼250 K. The strong effect on resonant and disorder scattering yields a significantly lower lattice thermal conductivity of 2.5 W m-1 K-1 at 773 K. Still, good weighed-mobility values were obtained, with high filling fraction of the Yb and Sr elements. This drives a reduced electrical resistivity of 2.1 × 10-5 Ω m, which leads to a peak zT of 0.26 at 773 K. The analysis and results performed for the synthesized (Sr,Yb)-double filled CoSb3, shed light on skutterudites for potential waste-heat recovery applications.

Elucidating the Magnetoelastic Coupling, Pressure-Dependent Magnetic Behavior, and Anomalous Hall Effect in FexTi2S4 Intercalation Sulfides.

Transition-metal chalcogenides with intercalated layered structures are interesting systems in material physics due to their attractive electronic and magnetic properties, with applications in the fields of magnetic refrigerators, catalysts, and thermoelectrics, among others. In this work, we studied in detail the structural, electronic, and magnetic properties of (Fe,Ti)-based sulfides with formula FexTi2S4 (x = 0.24, 0.32, and 0.42), prepared as polycrystalline materials under high-pressure conditions. They present a layered Heideite-type crystal structure, as assessed by synchrotron X-ray diffraction. A local structure analysis using Fe K-edge extended X-ray-absorption fine structure (EXAFS) data unveiled a conspicuous contraction of the main Fe-S bond in Fe0.24Ti2S4 at the vicinity of the magnetic transition 60-80 K. We suggest that this anomaly is related to magnetoelastic coupling effects. The EXAFS analysis allowed extraction of the Einstein temperatures (θE), i.e., the phonon contribution to the specific heat, for the two bond pairs Fe-S(1) [θE ≈318 K; 290 K (C/T)] and Fe-Ti(1) [θE ≈218 K; 190 K (C/T)]. In addition to the structural and local vibrational measurements, we probed the magnetic properties using magneto-calorimetry, magnetometry under applied pressure, magnetoresistance (MR), and Hall effect measurements. We observed the appearance of a broad peak in the specific heat around 120 K in the x = 0.42 compound that we associated with an antiferromagnetic ordering electronic transition. We found that the antiferromagnetic transition temperature is pressure and composition sensitive and reduces at 1.2 GPa by ∼12 and ∼3 K, for the members with x = 0.24 and x = 0.42, respectively. Similarly, the saturation magnetization in the ordered phase depends on both pressure and iron content, reducing its value by 50, 90, and 30% for x = 0.24, 0.32, and 0.42, respectively. We observed clear jumps in the magnetic hysteresis loops, MR, and anomalous Hall effect (AHE) below 2 K at fields around 2-4 T. We associated this observation with the metamagnetic transitions; from the Berry-curvature a decoupling parameter of SH = 0.12 V-1 is determined. Comparison of the results on the temperature-dependent magnetization, MR, and AHE elucidates a strong inelastic scattering contribution to the AHE at higher temperatures due to the cluster spin-glass phase.

Reduced Thermal Conductivity in Nanostructured AgSbTe2 Thermoelectric Material, Obtained by Arc-Melting.

AgSbTe2 intermetallic compound is a promising thermoelectric material. It has also been described as necessary to obtain LAST and TAGS alloys, some of the best performing thermoelectrics of the last decades. Due to the random location of Ag and Sb atoms in the crystal structure, the electronic structure is highly influenced by the atomic ordering of these atoms and makes the accurate determination of the Ag/Sb occupancy of paramount importance. We report on the synthesis of polycrystalline AgSbTe2 by arc-melting, yielding nanostructured dense pellets. SEM images show a conspicuous layered nanostructuration, with a layer thickness of 25-30 nm. Neutron powder diffraction data show that AgSbTe2 crystalizes in the cubic Pm-3m space group, with a slight deficiency of Te, probably due to volatilization during the arc-melting process. The transport properties show some anomalies at ~600 K, which can be related to the onset temperature for atomic ordering. The average thermoelectric figure of merit remains around ~0.6 from ~550 up to ~680 K.

Influence of the Synthesis and Crystallization Processes on the Cation Distribution in a Series of Multivariate Rare-Earth Metal-Organic Frameworks and Their Magnetic Characterization.

The incorporation of multiple metal atoms in multivariate metal-organic frameworks is typically carried out through a one-pot synthesis procedure that involves the simultaneous reaction of the selected elements with the organic linkers. In order to attain control over the distribution of the elements and to be able to produce materials with controllable metal combinations, it is required to understand the synthetic and crystallization processes. In this work, we have completed a study with the RPF-4 MOF family, which is made of various rare-earth elements, to investigate and determine how the different initial combinations of metal cations result in different atomic distributions in the obtained materials. Thus, we have found that for equimolar combinations involving lanthanum and another rare-earth element, such as ytterbium, gadolinium, or dysprosium, a compositional segregation takes place in the products, resulting in crystals with different compositions. On the contrary, binary combinations of ytterbium, gadolinium, erbium, and dysprosium result in homogeneous distributions. This dissimilar behavior is ascribed to differences in the crystallization pathways through which the MOF is formed. Along with the synthetic and crystallization study and considering the structural features of this MOF family, we also disclose here a comprehensive characterization of the magnetic properties of the compounds and the heat capacity behavior under different external magnetic fields.

Detailed Structural Features of the Perovskite-Related Halide RbPbI3 for Solar Cell Applications.

All-inorganic lead halide perovskites like CsPbBr3, CsPbI3, or RbPbI3 are good replacements for the classical hybrid organic-inorganic perovskites like CH3NH3PbI3, susceptible to fast degradation in the presence of humid air. They also exhibit outstanding light absorption properties suitable for solar energy applications. Here, we describe the synthesis of RbPbI3 by mechanochemical procedures with green credentials, avoiding toxic or expensive organic solvents; this specimen exhibits excellent crystallinity. We report neutron powder diffraction data, essential to revisit some subtle structural features around room temperature (200-400 K). In all these regimes, the orthorhombic Pnma crystal structure is characterized by the presence along the b direction of the crystal of double rows of edge-sharing PbI6 octahedra. The lone electron pairs of Pb2+ ions have a strong stereochemical effect on the PbI6 octahedral distortion. The relative covalency of Rb-I versus Pb-I bonds shows that the Pb-I-related motions are more rigid than Rb-I-related vibrations, as seen in the Debye temperatures from the evolution of the anisotropic displacements. The optical gap, measured by diffuse reflectance UV-vis spectroscopy, is ∼2.51 eV and agrees well with ab initio calculations. The thermoelectric Seebeck coefficient is 3 orders of magnitude larger than that of other halide perovskites, with a value of ∼117,000 µV·K-1 at 460 K.

Thermal Expansion and Rattling Behavior of Gd-Filled Co4Sb12 Skutterudite Determined by High-Resolution Synchrotron X-ray Diffraction.

In this work, Gd-filled skutterudite GdxCo4Sb12 was prepared using one step method under high pressure in a piston-cylinder-based press at 3.5 GPa and moderate temperature of 800 °C. A detailed structural characterization was performed using synchrotron X-ray diffraction (SXRD), revealing a filling fraction of x = 0.033(2) and an average bond length of 3.3499(3) Å. The lattice thermal expansion accessed via temperature-dependent SXRD led to a precise determination of a Debye temperature of 322(3) K, from the fitting of the unit-cell volume expansion using the second order Grüneisen approximation. This parameter, when evaluated through the mean square displacements of Co and Sb, displayed a value of 265(2) K, meaning that the application of the harmonic Debye theory underestimates the Debye temperature in skutterudites. Regarding the Gd atom, its intrinsic disorder value was ~5× and ~25× higher than those of the Co and Sb, respectively, denoting that Gd has a strong rattling behavior with an Einstein temperature of θE = 67(2) K. As a result, an ultra-low thermal conductivity of 0.89 W/m·K at 773 K was obtained, leading to a thermoelectric efficiency zT of 0.5 at 673 K.

Unveiling the Structural Behavior under Pressure of Filled M0.5Co4Sb12 (M = K, Sr, La, Ce, and Yb) Thermoelectric Skutterudites.

Skutterudite-type compounds based on □Co4Sb12 pnictide are promising for thermoelectric application due to their good Seebeck values and high carrier mobility. Filling the 8a voids (in the cubic space group Im3̅) with different elements (alkali, alkali earth, and rare earth) helps to reduce the thermal conductivity and thus increases the thermoelectric performance. A systematic characterization by synchrotron X-ray powder diffraction of different M-filled Co4Sb12 (M = K, Sr, La, Ce, and Yb) skutterudites was carried out under high pressure in the range ∼0-12 GPa. The isothermal equations of state (EOS) were obtained in this pressure range and the Bulk moduli (B0) were calculated for all the filled skutterudites, yielding unexpected results. A lattice expansion due to the filler elements fails in the description of the Bulk moduli. Topochemical studies of the filler site environment exhibited a slight disturbance and an increased ionic character when the filler is incorporated. The mechanical properties by means of Bulk moduli resulted in being sensitive to the presence of filler atoms inside the skutterudite voids, being affected by the covalent/ionic exchange of the Co-Sb and Sb-Sb bonds.

Large Enhancement of Critical Current in Superconducting Devices by Gate Voltage.

Significant control over the properties of a high-carrier density superconductor via an applied electric field has been considered infeasible due to screening of the field over atomic length scales. Here, we demonstrate an enhancement of up to 30% in critical current in a back-gate tunable NbN micro- and nano superconducting bridges. Our suggested plausible mechanism of this enhancement in critical current based on surface nucleation and pinning of Abrikosov vortices is consistent with expectations and observations for type-II superconductor films with thicknesses comparable to their coherence length. Furthermore, we demonstrate an applied electric field-dependent infinite electroresistance and hysteretic resistance. Our work presents an electric field driven enhancement in the superconducting property in type-II superconductors which is a crucial step toward the understanding of field-effects on the fundamental properties of a superconductor and its exploitation for logic and memory applications in a superconductor-based low-dissipation digital computing paradigm.

Enhanced stability in CH3NH3PbI3 hybrid perovskite from mechano-chemical synthesis: structural, microstructural and optoelectronic characterization.

Among the hybrid organic-inorganic perovskites MAPbX3 (MA: methyl-ammonium CH3-NH3+, X = halogen), the triiodide specimen (MAPbI3) is still the material of choice for solar energy applications. Although it is able to absorb light above its 1.6 eV bandgap, its poor stability in humid air atmosphere has been a major drawback for its use in solar cells. However, we discovered that this perovskite can be prepared by ball milling in a straightforward way, yielding specimens with a superior stability. This fact allowed us to take atomic-resolution STEM images for the first time, with sufficient quality to unveil microscopic aspects of this material. We demonstrated full Iodine content, which might be related to the enhanced stability, in a more compact PbI6 framework with reduced unit-cell volume. A structural investigation from neutron powder diffraction (NPD) data of an undeuterated specimen was essential to determine the configuration of the organic MA unit in the 100-298 K temperature range. A phase transition is identified, from the tetragonal structure observed at RT (space group I4/mcm) to an orthorhombic (space group Pnma) phase where the methyl-ammonium organic units are fully localized. Our NPD data reveal that the MA changes are gradual and start before reaching the phase transition. Optoelectronic measurements yield a photocurrent peak at an illumination wavelength of 820 nm, which is redshifted by 30 nm with respect to previously reported measurements on MAPbI3 perovskites synthesized by crystallization from organic solvents.

Direct Transformation of Crystalline MoO3 into Few-Layers MoS2.

We fabricated large-area atomically thin MoS2 layers through the direct transformation of crystalline molybdenum trioxide (MoO3) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm single-crystal domain size) with areas of up to 300 × 300 µm2, 2-4 layers in thickness and show a marked p-type behavior. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements.

Tuning ferromagnetism at room temperature by visible light.

Most digital information today is encoded in the magnetization of ferromagnetic domains. The demand for ever-increasing storage space fuels continuous research for energy-efficient manipulation of magnetism at smaller and smaller length scales. Writing a bit is usually achieved by rotating the magnetization of domains of the magnetic medium, which relies on effective magnetic fields. An alternative approach is to change the magnetic state directly by acting on the interaction between magnetic moments. Correlated oxides are ideal materials for this because the effects of a small external control parameter are amplified by the electronic correlations. Here, we present a radical method for reversible, light-induced tuning of ferromagnetism at room temperature using a halide perovskite/oxide perovskite heterostructure. We demonstrate that photoinduced charge carriers from the [Formula: see text] photovoltaic perovskite efficiently dope the thin [Formula: see text] film and decrease the magnetization of the ferromagnetic state, allowing rapid rewriting of the magnetic bit. This manipulation could be accomplished at room temperature; hence this opens avenues for magnetooptical memory devices.

Evidence of anomalous switching of the in-plane magnetic easy axis with temperature in Fe3O4 film on SrTiO3:Nb by v-MOKE and ferromagnetic resonance.

The evolution of the magnetic anisotropy directions has been studied in a magnetite (Fe3O4) thin film grown by infrared pulsed-laser deposition on SrTiO3(100):Nb substrate. The magnetic easy axes at room temperature are found along the in-plane 〈100〉 film directions, which means a rotation of the easy axis by 45° with respect to the directions typically reported for bulk magnetite and films grown on single-crystal substrates. Moreover, when undergoing the Verwey transition temperature, TV, the easy axis orientation evolves to the 〈110〉 film directions. This anomalous behavior has been demonstrated by measuring first the angular dependence of coercivity and remanence well above and below TV by high-resolution vectorial magneto-optical Kerr effect (v-MOKE). Ferromagnetic resonance (FMR) measurements have additionally proven a well-defined fourfold magnetic anisotropy induced during growth with confirmed easy axis directions along 〈100〉 for T > TV and 〈110〉 for T < TV. These results provide a clear proof of the possibility of tuning magnetic anisotropy in Fe3O4 thin films by proper control on the growth parameters and substrate choice.

Influence of Doping and Nanostructuration on n-Type Bi2(Te0.8Se0.2)3 Alloys Synthesized by Arc Melting.

In competitive thermoelectric devices for energy conversion and generation, high-efficiency materials of both n-type and p-type are required. For this, Bi2Te3-based alloys have the best thermoelectric properties in room temperature applications. Partial replacement of tellurium by selenium is expected to introduce new donor states in the band gap, which would alter electrical conductivity and thermopower. We report on the preparation of n-type Bi2(Te1-xSex)3 solid solutions by a straightforward arc-melting technique, yielding nanostructured polycrystalline pellets. X-ray and neutron powder diffraction was used to assess Se inclusion, also indicating that the interactions between quintuple layers constituting this material are weakened upon Se doping, while the covalency of intralayer bonds is augmented. Moreover, scanning electron microscopy shows large surfaces perpendicular to the c crystallographic axis assembled as stacked sheets. Grain boundaries related to this 2D nanostructuration affect the thermal conductivity reducing it below 0.8 Wm-1K-1 at room temperature. Furthermore, Se doping increases the absolute Seebeck coefficient up to -140 µV K-1 at 400 K, which is also beneficial for improved thermoelectric efficiency.

Orientational ordering and low-temperature libration in the rotor-stator cocrystals of fullerenes and cubane.

Cocrystals of cubane and fullerenes, C60-cubane and C70-cubane, show distinct rotational ordering transitions. We studied the corresponding structural changes with temperature-dependent X-ray diffraction and the thermodynamics of the phase transitions with adiabatic microcalorimetry and differential scanning calorimetry. C60-cubane has one phase transition around 130 K from a high-temperature fcc phase with freely rotating C60 to a low-temperature orthorombic phase in which the fullerene rotation is frozen. The corresponding enthalpy change is approximately 1170 J/mol, and the entropy change is 9.6 J/(mol K). C70-cubane has two phase transitions. Around 380 K, the high-temperature fcc phase with freely rotating C70 transforms into a bct phase in which the C70 rotates uniaxially around an axis that precesses around the c direction with a full opening angle of 40 degree. Around 170 K, the uniaxial rotation also freezes out, with an accompanying structural transition to monoclinic and enthalpy and entropy changes of 620 J/mol and 8.7 J/(mol K), respectively. The low-temperature specific heat was analyzed in terms of the Debye-Einstein model to estimate the librational energies of the fullerenes and Debye temperatures. We found very similar values for the two cocrystals, approximately Elib = 2.2 meV and TDebye = 23 K. For reference, we also measured the specific heats of pure C60 and C70 and found Elib = 2.96 meV and TDebye = 32 K for C60 and Elib = 1.9 meV and TDebye = 20 K for C70.