Acquired diaphragmatic hernia following a peritoneal biopsy for gastric cancer dissemination in the diaphragm: a case report.

BACKGROUND: Acute diaphragmatic hernia is a life-threatening condition caused by prolapse of an abdominal organ into the thoracic cavity through a defect in the diaphragm. We present herein a case of acquired diaphragmatic hernia following a peritoneal biopsy for gastric cancer dissemination in the diaphragm. CASE PRESENTATION: A 72-year-old, female patient presented with a complaint of acute abdomen 10 months after receiving a diagnosis of stage IV gastric cancer with peritoneal dissemination based on peritoneal biopsy findings during staging laparoscopy. Computed tomography demonstrated herniation of the small intestine into the thoracic cavity. Emergency surgery was performed, and a full-thickness diaphragmatic defect was found intraoperatively at the same location as the previous, peritoneal biopsy. The incarcerated small intestine was atraumatically repositioned into the abdominal cavity, and the defect was closed laparoscopically using an absorbable barbed suture. CONCLUSIONS: Although complications of staging laparoscopy are extremely rare, excising disseminated nodules from the diaphragm carries the risk of diaphragmatic hernia. For this reason, avoiding excision is desirable unless a diaphragmatic biopsy is needed.

Increased migratory activity and cartilage regeneration by superficial-zone chondrocytes in enzymatically treated cartilage explants.

BACKGROUND: Limited chondrocyte migration and impaired cartilage-to-cartilage healing is a barrier in cartilage regenerative therapy. Collagenase treatment and delivery of a chemotactic agent may play a positive role in chondrocyte repopulation at the site of cartilage damage. This study evaluated chondrocyte migratory activity after enzymatic treatment in cultured cartilage explant. Differential effects of platelet-derived growth factor (PDGF) dimeric isoforms on the migratory activity were investigated to define major chemotactic factors for cartilage. METHODS: Full-thickness cartilage (4-mm3 blocks) were harvested from porcine femoral condyles and subjected to explant culture. After 15 min or 60 min of actinase and collagenase treatments, chondrocyte migration and infiltration into a 0.5-mm cartilage gap was investigated. Cell morphology and lubricin, keratan sulfate, and chondroitin 4 sulfate expression in superficial- and deep-zone chondrocytes were assessed. The chemotactic activities of PDGF-AA, -AB, and -BB were measured in each zone of chondrocytes, using a modified Boyden chamber assay. The protein and mRNA expression and histological localization of PDGF-ß were analyzed by western blot analysis, real-time reverse transcription polymerase chain reaction (RT-PCR), and immunohistochemistry, and results in each cartilage zone were compared. RESULTS: Superficial-zone chondrocytes had higher migratory activity than deep-zone chondrocytes and actively bridged the cartilage gap, while metachromatic staining by toluidine blue and immunoreactivities of keratan sulfate and chondroitin 4 sulfate were detected around the cells migrating from the superficial zone. These superficial-zone cells with weak immunoreactivity for lubricin tended to enter the cartilage gap and possessed higher migratory activity, while the deep-zone chondrocytes remained in the lacuna and exhibited less migratory activity. Among PDGF isoforms, PDGF-AB maximized the degree of chemotactic activity of superficial zone chondrocytes. Increased expression of PDGF receptor-ß was associated with higher migratory activity of the superficial-zone chondrocytes. CONCLUSIONS: In enzymatically treated cartilage explant culture, chondrocyte migration and infiltration into the cartilage gap was higher in the superficial zone than in the deep zone. Preferential expression of PDGF receptor-ß combined with the PDGF-AB dimeric isoform may explain the increased migratory activity of the superficial-zone chondrocytes. Cells migrating from superficial zone may contribute to cartilage regeneration.

Efficacy of nonviral gene transfer of human hepatocyte growth factor (HGF) against ischemic-reperfusion nerve injury in rats.

Ischemic neuropathy is common in subjects with critical limb ischemia, frequently causing chronic neuropathic pain. However, neuropathic pain caused by ischemia is hard to control despite the restoration of an adequate blood flow. Here, we used a rat model of ischemic-reperfusion nerve injury (IRI) to investigate possible effects of hepatocyte growth factor (HGF) against ischemic neuropathy. Hemagglutinating virus of Japan (HVJ) liposomes containing plasmids encoded with HGF was delivered into the peripheral nervous system by retrograde axonal transport following its repeated injections into the tibialis anterior muscle in the right hindlimb. First HGF gene transfer was done immediately after IRI, and repeated at 1, 2 and 3 weeks later. Rats with IRI exhibited pronounced mechanical allodynia and thermal hyperalgesia, decreased blood flow and skin temperature, and lowered thresholds of plantar stimuli in the hind paw. These were all significantly improved by HGF gene transfer, as also were sciatic nerve conduction velocity and muscle action potential amplitudes. Histologically, HGF gene transfer resulted in a significant increase of endoneurial microvessels in sciatic and tibial nerves and promoted nerve regeneration which were confirmed by morphometric analysis. Neovascularization was observed in the contralateral side of peripheral nerves as well. In addition, IRI elevated mRNA levels of P2X3 and P2Y1 receptors, and transient receptor potential vanilloid receptor subtype 1 (TRPV1) in sciatic nerves, dorsal root ganglia and spinal cord, and these elevated levels were inhibited by HGF gene transfer. In conclusion, HGF gene transfer is a potent candidate for treatment of acute ischemic neuropathy caused by reperfusion injury, because of robust angiogenesis and enhanced nerve regeneration.

Epidemiological patterns of traumatic musculoskeletal injuries and non-traumatic disorders in Japan Self-Defense Forces.

BACKGROUND: The epidemiological patterns of musculoskeletal injuries or disorders in military personnel have not been well documented and a better understanding is required for proper preventative measures and treatment. Here, we investigated musculoskeletal injuries or disorders among members of the Japan Self-Defense Forces. METHODS: All orthopedic patients (n = 22,340) who consulted to Japan Self-Defense Forces Hospitals were investigated for their type of injury or disorder, the injured body part, the mechanism, and the cause of injuries. RESULTS: Thirty-nine percent of the cases were classified as traumatic injuries, and 61% were classified as non-traumatic disorders. Of the traumatic injury patients, the injured body part was the upper extremity in 32%, the trunk in 23%, and the lower extremities in 45% of the cases. The most common injured body location was the knee followed by the hand/finger and ankle. Exercise was the most common cause of injury, followed by traffic accident and military training. Contusions were the most common traumatic injuries, followed by sprains and fractures. Of non-traumatic disorders, the lower extremities were reported as the injured part in 43% of the disorders. Lumbar spine disorders were the most common non-traumatic disorders, followed by tendon and joint disorders. CONCLUSIONS: Over one-third of orthopedic cases among members of the Japan Self-Defense Forces are traumatic injuries, with the knee being the body part most commonly injured and exercise being the leading cause of injury.

Recovery of Shoulder Rotational Muscle Strength After Arthroscopic Bankart Repair.

BACKGROUND: Shoulder rotational muscles act as dynamic stabilizers of the glenohumeral joint, and the recovery of muscle strength plays an important role in stabilizing the joint during postoperative rehabilitation. However, temporal changes in muscle strength after arthroscopic Bankart repair have not been clarified. PURPOSE: To better understand the temporal recovery of shoulder rotational muscle strength after arthroscopic Bankart repair. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Isokinetic concentric shoulder rotational muscle strength was evaluated in 50 patients who were diagnosed with recurrent dislocations of the glenohumeral joint and treated with arthroscopic Bankart repair. RESULTS: The mean peak torque/weight and total work were reduced significantly at 1.5 months after surgery (P < .0001) and returned to preoperative levels by 6 months for external rotation and 4.5 months for internal rotation. The contralateral peak torque ratios reached preoperative levels by 6 months after surgery. The ipsilateral peak torque ratios were reduced between 1.5 and 3 months after surgery and returned to preoperative levels at 6 months for external rotation and 4.5 months for internal rotation. CONCLUSION: Isokinetic shoulder rotational muscle strength after arthroscopic Bankart repair recovered to preoperative levels by 6 months for external rotation and 4.5 months for internal rotation.

Comparison of Pedicle Screw Fixation Strength Among Different Transpedicular Trajectories: A Finite Element Study.

STUDY DESIGN: Comparative biomechanical study by finite element (FE) method. OBJECTIVE: To investigate the pullout strength of pedicle screws using different insertional trajectories. SUMMARY OF BACKGROUND DATA: Pedicle screw fixation has become the gold standard for spinal fusion, however, not much has been done to clarify how the fixation strength of pedicle screws are affected by insertional trajectories and bone properties. MATERIALS AND METHODS: Three-dimensional FE models of 20 L4 vertebrae were constructed from the computed tomographic data. Five different transpedicular trajectories were compared: the traditional trajectory, the vertical trajectory, and the 3 lateral trajectories with different sagittal directions (caudal, parallel, cranial). For a valid comparison, screws of the same shape and size were inserted into the same pedicle in each subject, and the pullout strength were compared with nonlinear FE analyses. In addition, the pullout strength was correlated with bone mineral density (BMD). RESULTS: The mean pullout strength showed a 3.9% increase for the vertical trajectory relative to the traditional trajectory, 6.1% for the lateral-caudal trajectory, 21.1% for the lateral-parallel trajectory, and 34.7% for the lateral-cranial trajectory. The lateral-cranial trajectory demonstrated the highest value among all trajectories (P<0.001). In each trajectory, the correlation coefficient between the pullout strength and BMD of the femoral neck (r=0.74-0.83, P<0.01) was higher than the mean BMD of all the lumbar vertebrae (r=0.49-0.75, P<0.01), BMD of the L4 vertebra (r=0.39-0.64, P<0.01), and regional BMD of the L4 pedicle (r=0.53-0.76, P<0.01). CONCLUSIONS: Regional variation in the vertebral bone density and the amount of denser bone-screw interface contribute to the differences of stiffness among different screw trajectories. BMD of the femoral neck is considered to be a better objective predictor of pedicle screw stability than that of the lumbar vertebra.

Cortical Bone Trajectory for Thoracic Pedicle Screws: A Technical Note.

STUDY DESIGN: A morphometric measurement of new thoracic pedicle screw trajectory using computed tomography and a biomechanical study on cadaveric thoracic vertebrae using insertional torque. OBJECTIVE: To introduce a new thoracic pedicle screw trajectory which maximizes engagement with denser bone. SUMMARY OF BACKGROUND DATA: Cortical bone trajectory (CBT) which maximizes the thread contact with cortical bone provides enhanced screw purchase. Despite the increased use of CBT screws in the lumbar spine, no study has yet reported the insertional technique for thoracic CBT. METHODS: First, the computed tomography scans of 50 adults were studied for morphometric measurement of lower thoracic CBT. The starting point was determined to be the intersection of the lateral two thirds of the superior articular process and the inferior border of the transverse process. The trajectory was straight forward in the axial plane angulated cranially targeting the posterior third of the superior endplate. The maximum diameter, length, and the cephalad angle were investigated. Next, the insertional torque of pedicle screws using this new technique was measured and compared with that of the traditional technique on 24 cadaveric thoracic vertebrae. RESULTS: All morphometric parameters of thoracic CBT increased from T9 to T12 (the mean diameter: from 5.8 mm at T9 to 8.5 mm at T12; the length: from 29.7 mm at T9 to 32.0 mm at T12; and the cephalad angle: from 21.4 degrees at T9 to 27.6 degrees at T12). The mean maximum insertional torque of CBT screws and traditional screws were 1.02±0.25 and 0.66±0.15 Nm, respectively. The new technique demonstrated average 53.8% higher torque than the traditional technique (P<0.01). CONCLUSIONS: The detailed morphometric measurement and favorable screw fixation stability of thoracic CBT are reported. The insertional torque using thoracic CBT technique was 53.8% higher than that of the traditional technique.

Incidence and Characteristics of Traumatic Shoulder Instability in Japanese Military Cadets.

Little is known regarding the incidence of the shoulder instability in Japan. The aim of this study was to evaluate the incidence of traumatic shoulder instability among Japanese military cadets. A prospective cohort study was performed to capture all traumatic shoulder instability events between 2009 and 2012 among cadets in a military educational academy of the Japan Self Defense Forces. The total number of cadets in the cohort was 5,402 (average age 20.6 years). The incidence of instability events, including dislocation or subluxation, was calculated. Chronicity, demographics of participants, mechanism of injury, and athletic events were also evaluated. The incidence of traumatic dislocation was 4.1/1,000 person-years and that of subluxation was 6.1/1,000 person-years. The incidence of primary dislocation or subluxation was 5.4/1,000 person-years and that of recurrent dislocation or subluxation was 4.7/1,000 person-years. Of first dislocations or subluxations, 92% occurred during sports activities, including after-school sports activities, military training, and gym classes. In conclusion, the overall incidence of shoulder instability events among Japanese military cadets was 10.3/1,000 person-years, and was extremely high. Most shoulder instability events occurred during sports activities, and a program to prevent such injuries during sports activities is necessary for young participants.

Avulsion Fracture of the Medial Head of the Gastrocnemius Muscle Associated with Posterior Dislocation of the Knee: A Case Report.

CASE: We present an extremely rare case of an avulsion fracture of the medial head of the gastrocnemius muscle associated with posterior dislocation of the knee. The patient was a fifty-one-year-old man who was hit by a car while riding a motorcycle. The avulsed fragment was reduced and fixed with a screw, which resulted in maintenance of joint reduction despite residual instability due to the multiligamentous injuries. CONCLUSION: Reduction and fixation of the bone fragment attached to the medial head of the gastrocnemius muscle is important to restore tension of the gastrocnemius muscle, which serves as an important posterior joint stabilizer.

Evaluation of the Fixation Strength of Pedicle Screws Using Cortical Bone Trajectory: What Is the Ideal Trajectory for Optimal Fixation?

STUDY DESIGN: In vivo analysis of insertional torque of pedicle screws using cortical bone trajectory (CBT) technique. OBJECTIVE: To investigate factors contributing to the fixation strength of CBT screws and to clarify the ideal cortical trajectory for lumbar fusion. SUMMARY OF BACKGROUND DATA: CBT has developed as a new minimally invasive technique of lumbar instrumentation. Despite biomechanical studies demonstrating the superior characteristics of CBT, no study has elucidated the most suitable path for optimal fixation or compared the fixation within variations of trajectory. METHODS: The insertional torque of pedicle screws using CBT was measured intraoperatively in 72 consecutive patients. The detailed positions of a total of 268 screws were confirmed using postoperative reconstruction computed tomographic scans and were analyzed to identify factors contributing to the level of insertional torque. Investigated factors were as follows: (1) age, (2) bone mineral density of the femoral neck and lumbar vertebrae by dual-energy x-ray absorptiometry; (3) the pedicle width and height, (4) the length of the implant, (5) total screw length within the vertebra, (6) the screw length within the vertebral body, (7) the screw length within the lamina, (8) the cephalad and lateral angle of the trajectory, and (9) the distance from the long axis of the screw to the inferior and medial borders of the pedicle. RESULTS: Multiple regression analysis showed that bone mineral density of the femoral neck, screw length within the lamina, and cephalad angle were significant independent factors affecting torque. CONCLUSION: The fixation of CBT screws varied depending on technical factors (cephalad angle and screw length within the lamina) as well as the individual patient factor of bone mineral density. The ideal trajectory was directed 25° to 30° cranially along the inferior border of the pedicle so as to obtain maximum contact with the lamina and sufficient length within the vertebral body. LEVEL OF EVIDENCE: 2.

Biomechanical evaluation of the fixation strength of lumbar pedicle screws using cortical bone trajectory: a finite element study.

OBJECT: Cortical bone trajectory (CBT) maximizes thread contact with the cortical bone surface and provides increased fixation strength. Even though the superior stability of axial screw fixation has been demonstrated, little is known about the biomechanical stiffness against multidirectional loading or its characteristics within a unit construct. The purpose of the present study was to quantitatively evaluate the anchorage performance of CBT by the finite element (FE) method. METHODS: Thirty FE models of L-4 vertebrae from human spines (mean age [± SD] 60.9 ± 18.7 years, 14 men and 16 women) were computationally created and pedicle screws were placed using the traditional trajectory (TT) and CBT. The TT screw was 6.5 mm in diameter and 40 mm in length, and the CBT screw was 5.5 mm in diameter and 35 mm in length. To make a valid comparison, the same shape of screw was inserted into the same pedicle in each subject. First, the fixation strength of a single pedicle screw was compared by axial pullout and multidirectional loading tests. Next, vertebral fixation strength within a construct was examined by simulating the motions of flexion, extension, lateral bending, and axial rotation. RESULTS: CBT demonstrated a 26.4% greater mean pullout strength (POS; p = 0.003) than TT, and also showed a mean 27.8% stronger stiffness (p < 0.05) during cephalocaudal loading and 140.2% stronger stiffness (p < 0.001) during mediolateral loading. The CBT construct had superior resistance to flexion and extension loading and inferior resistance to lateral bending and axial rotation. The vertebral fixation strength of the construct was significantly correlated with bone mineral density of the femoral neck and the POS of a single screw. CONCLUSIONS: CBT demonstrated superior fixation strength for each individual screw and sufficient stiffness in flexion and extension within a construct. The TT construct was superior to the CBT construct during lateral bending and axial rotation.

Biomechanical Evaluation of Cross Trajectory Technique for Pedicle Screw Insertion: Combined Use of Traditional Trajectory and Cortical Bone Trajectory.

OBJECTIVE: To introduce a novel double-screw (cross trajectory) technique that combines use of the traditional trajectory (TT) and cortical bone trajectory (CBT) and to investigate its fixation strength quantitatively by finite element (FE) analysis. METHODS: Three-dimensional FE models of 30 osteoporotic L4 vertebrae (patients' mean age: 77.3 ± 7.4 years, 11 men and 19 women) were computationally created. Each vertebral model was implanted with bilateral pedicle screws by TT (using 7.5 mm × 40 mm screws), CBT (using 5.5 mm × 35 mm screws) and cross trajectory (combined use of TT screws of 5.5 mm × 40 mm and CBT screws of 5.5 mm × 35 mm) and compared among three groups. The vertebral fixation strength of a bilateral-screw construct was examined by applying forces simulating flexion, extension, lateral bending, and axial rotation to the vertebrae by non-linear FE analyses. RESULTS: Fixation strength using the cross trajectory was the highest among the three different techniques (P < 0.01). The cross trajectory construct demonstrated 320% higher strength than the TT construct in flexion, 293% higher in extension, 102% higher in lateral bending, and 40% higher in axial rotation (P < 0.01). Similarly, the cross trajectory construct showed 268% higher strength than the CBT construct in flexion, 269% higher in extension, 210% higher in lateral bending, and 178% in axial rotation (P < 0.01). CONCLUSIONS: The cross trajectory technique offered superior fixation strength over the TT and CBT techniques in each plane of motion. This technique may be a valid option for posterior fusion, especially in osteoporotic spine.

Cortical bone trajectory for lumbosacral fixation: penetrating S-1 endplate screw technique: technical note.

OBJECT: A cortical bone trajectory (CBT) is a new pedicle screw trajectory that maximizes the thread contact with cortical bone surface, providing enhanced screw purchase. Despite the increased use of the CBT in the lumbar spine, little is known about the insertion technique for the sacral CBT. The aim of this study was to introduce a novel sacral pedicle screw trajectory. This trajectory engages with denser bone maximally by the screw penetrating the S-1 superior endplate through a more medial entry point than the traditional technique, and also has safety advantages, with the protrusion of the screw tip into the intervertebral disc space carrying no risk of neurovascular injury. METHODS: In this study, the CT scans of 50 adults were studied for morphometric measurement of the new trajectory. The entry point was supposed to be the junction of the center of the superior articular process of S-1 and approximately 3 mm inferior to the most inferior border of the inferior articular process of L-5. The direction was straight forward in the axial plane without convergence, angulated cranially in the sagittal plane penetrating the middle of the sacral endplate. The cephalad angle to the sacral endplate, length of trajectory, and safety of the trajectory were investigated. Next, the insertional torque of pedicle screws using this technique was measured intraoperatively in 19 patients and compared with the traditional technique. RESULTS: The mean cephalad angle in these 50 patients was 30.7° ± 5.1°, and the mean length of trajectory was 31.5 ± 3.5 mm. The CT analysis revealed that the penetrating S-1 endplate technique did not cause any neurovascular injury anteriorly in any case. The new technique demonstrated an average of 141% higher insertional torque than the traditional monocortical technique. CONCLUSIONS: The penetrating S-1 endplate technique through the medial entry point is suitable for the connection of lumbar CBT, has revealed favorable stability for lumbosacral fixation, and has reduced the potential risk of neurovascular injuries.

Reliability of the Hand20 questionnaire: comparison with the 36-Item Short-Form Health Survey.

BACKGROUND: Hand20 is an illustrated, self-administered questionnaire comprising 20 short and easy-to-understand questions to assess upper limb disorders. This study aimed to test the reliability, validity, and responsiveness of Hand20. METHODS: Eighty-five patients with three upper limb disorders (51 with trigger finger, 29 with ulnar impaction syndrome, and five with carpal tunnel syndrome) completed Hand20, the Japanese Society for Surgery of the Hand version of the Disabilities of the Arm, Shoulder, and Hand questionnaire (DASH-JSSH), and the 36-Item Short-Form Health Survey (SF-36). Reliability was assessed by internal consistency. To test the validity, a factor analysis of Hand20 was performed and the correlation coefficients between Hand20 and DASH-JSSH and those between Hand20 and SF-36 were calculated. Responsiveness was evaluated in 47 patients with trigger finger as the standardized response mean and effect size after treatment. RESULTS: A Cronbach's α coefficient of 0.967 confirmed the unidimensionality of Hand20. The correlation coefficient between Hand20 and DASH-JSSH was 0.84. The correlations between Hand20 and the SF-36 subscales ranged from -0.236 to -0.596. Moderate correlations were observed for "Role-physical" (r = -0.596) and "Bodily pain" (r = -0.557). The correlation between the Hand20 and "Physical functioning" was weak (r = -0.313). The standardized response mean and effect size of Hand20 was 1.50 and 1.60, respectively. CONCLUSIONS: The Hand20 has evaluation capacities equivalent to those of DASH-JSSH. There was a moderate correlation between Hand20 and SF-36.

In vivo analysis of insertional torque during pedicle screwing using cortical bone trajectory technique.

STUDY DESIGN: The insertional torque of pedicle screws using the cortical bone trajectory (CBT) was measured in vivo. OBJECTIVE: To investigate the effectiveness of the CBT technique by measurement of the insertional torque. SUMMARY OF BACKGROUND DATA: The CBT follows a mediolateral and caudocephalad directed path, engaging with cortical bone maximally from the pedicle to the vertebral body. Some biomechanical studies have demonstrated favorable characteristics of the CBT technique in cadaveric lumbar spine. However, no in vivo study has been reported on the mechanical behavior of this new trajectory. METHODS: The insertional torque of pedicle screws using CBT and traditional techniques were measured intraoperatively in 48 consecutive patients. A total of 162 screws using the CBT technique and 36 screws using the traditional technique were compared. In 8 of 48 patients, the side-by-side comparison of 2 different insertional techniques for each vertebra were performed, which formed the H group. In addition, the insertional torque was correlated with bone mineral density. RESULTS: The mean maximum insertional torque of CBT screws and traditional screws were 2.49 ± 0.99 Nm and 1.24 ± 0.54 Nm, respectively. The CBT screws showed 2.01 times higher torque and the difference was significant between the 2 techniques (P < 0.01). In the H group, the insertional torque were 2.71 ± 1.36 Nm in the CBT screws and 1.58 ± 0.44 Nm in the traditional screws. The CBT screws demonstrated 1.71 times higher torque and statistical significance was achieved (P < 0.01). Positive linear correlations between maximum insertional torque and bone mineral density were found in both technique, the correlation coefficient of traditional screws (r = 0.63, P < 0.01) was higher than that of the CBT screws (r = 0.59, P < 0.01). CONCLUSION: The insertional torque using the CBT technique is about 1.7 times higher than the traditional technique. LEVEL OF EVIDENCE: 2.

Therapeutic effect of exendin-4, a long-acting analogue of glucagon-like peptide-1 receptor agonist, on nerve regeneration after the crush nerve injury.

Glucagon-like peptide-1 (GLP-1) is glucose-dependent insulinotropic hormone secreted from enteroendocrine L cells. Its long-acting analogue, exendin-4, is equipotent to GLP-1 and is used to treat type 2 diabetes mellitus. In addition, exendin-4 has effects on the central and peripheral nervous system. In this study, we administered repeated intraperitoneal (i.p.) injections of exendin-4 to examine whether exendin-4 is able to facilitate the recovery after the crush nerve injury. Exendin-4 injection was started immediately after crush injury and was repeated every day for subsequent 14 days. Rats subjected to sciatic nerve crush exhibited marked functional loss, electrophysiological dysfunction, and atrophy of the tibialis anterior muscle (TA). All these changes, except for the atrophy of TA, were improved significantly by the administration of exendin-4. Functional, electrophysiological, and morphological parameters indicated significant enhancement of nerve regeneration 4 weeks after nerve crush. These results suggest that exendin-4 is feasible for clinical application to treat peripheral nerve injury.

Morphometric measurement of cortical bone trajectory for lumbar pedicle screw insertion using computed tomography.

STUDY DESIGN: A morphometric measurement of cortical bone trajectory (CBT) for the lumbar pedicle screw insertion using computed tomography (CT). OBJECTIVE: The aim of this study was to conduct a detailed morphometric measurement of the CBT. SUMMARY OF BACKGROUND DATA: The CBT is a novel lumbar pedicle screw trajectory, which follows a caudocephalad path sagittally and a laterally directed path in the transverse plane. The advantage associated with this modified technique is increased cortical bone contact, providing an enhanced screw purchase. However, little is known about the possible screw size or detailed direction of the trajectory. METHODS: The CT scans of 100 adults who underwent examination for spinal problems were studied. A total of 470 lumbar vertebrae excluding spondylosis, malformation, and tumor were observed. In this trajectory, the starting point was supposed to be the junction of the center of the superior articular process and 1 mm inferior to the inferior border of the transverse process. The CT images were analyzed using 3-dimensional reconstruction software. The diameter, length, lateral angle to the vertebral sagittal plane, and cephalad angle to the vertebral horizontal plane of the trajectory were measured. RESULTS: The mean diameter gradually increased from L1 to L5 (from 6.2 mm at L1 to 8.4 mm at L5). The mean length from L1 to L5 were 36.8, 38.2, 39.3, 39.8, and 38.3 mm, respectively. The lateral angle from L1 to L5 were 8.6, 8.5, 9.1, 9.1, and 8.8 degrees, respectively. The cephalad angle from L1 to L5 were 26.2, 25.5, 26.2, 26.0, and 25.8 degrees, respectively. CONCLUSIONS: The morphology of the pedicle, such as shape and pedicle axis angle, differed over the lumbar levels, our measurements demonstrated similar data excluding the diameter of the trajectory. There were no significant differences between each level of the lateral and cephalad angles.

Linezolid and vancomycin decrease the therapeutic effect of methylene blue-photodynamic therapy in a mouse model of MRSA bacterial arthritis.

We previously reported that photodynamic therapy (PDT) using intra-articular methylene blue (MB) could be used to treat arthritis in mice caused by bioluminescent methicillin-resistant Staphylococcus aureus (MRSA) either in a therapeutic or in a preventative mode. PDT accumulated neutrophils into the mouse knee via activation of chemoattractants such as inflammatory cytokines or chemokines. In this study, we asked whether PDT combined with antibiotics used for MRSA could provide added benefit in controlling the infection. We compared MB-PDT alone, systemic administration of either linezolid (LZD) alone or vancomycin (VCM) alone or the combination of PDT with either LZD or VCM. Real-time noninvasive imaging was used to serially follow the progress of the infection. PDT alone was the most effective, whereas LZD alone was ineffective and VCM alone showed some benefit. Surprisingly the addition of LZD or VCM reduced the therapeutic effect of PDT alone (P < 0.05). Considering that PDT in this mouse model stimulates neutrophils to be antibacterial rather than actively killing the bacteria, we propose that LZD and VCM might inhibit the activation of inflammatory cytokines without eradicating the bacteria, and thereby reduce the therapeutic effect of PDT.