RESUMEN
Three different types of cation exchangers were produced from four basic poly(styrene-divinylbenzene) substrates with different properties. Porous PS-DVB resin beads were functionalized by sulfonation and sulfoacylation under various conditions to produce sulfonated resins with exchange capacities of 0.03-1.80 mM g(-1). The matrix with 50% of cross-linking is most suitable for updating by the proposed technique. Sulfuric and chlorosulfonic acids were used as the reagents for sulfonation. The sulfonating conditions, capacities, and the technique of the synthesis are given. The effects of parameters of the sulfonation reaction and the composition of the reactionary mixture on ion-exchange capacity of the sorbents were investigated. Selectivity and efficiency of the separation of some inorganic cations and derivatives of amines and hydrazines on the resins obtained are compared by ion chromatography with conductometric detection. As a result, the sulfoacylated resin was proved more efficient for the separation of these analytes. The resolution of the analytes strongly depends on the degree of functionalization. The best performance about 19,000 plates m(-1) was obtained using the sulfopropionylated beads with an ion-exchange capacity of 0.3 mM g(-1). The prepared sulfoacylated cation exchanger was compared with the commercially available Dionex CS-12 packing material. It was found that the separation of alkaline ions and 1,1-dimethylhydrazine (UDMH) were much better that those for the commercial material.
