How to use a rotating ring-disc electrode (RRDE) subtraction method to investigate the electrocatalytic oxygen reduction reaction?

When studying electrochemical oxygen reduction reactions in homogeneous media, special attention must be given to the significant background activity present with conventional electrode materials. The intrinsic electrocatalytic activity of different materials can be investigated using complementary methods, such as the rotating ring-disc electrode (RRDE) technique and chronoamperometric electrolysis with product quantification. This report presents a detailed investigation of the electrocatalytic ability of hydroxy anthraquinone derivatives and riboflavin towards hydrogen peroxide (H2O2) production via a novel RRDE subtraction method together with chronoamperometric electrolysis. Qualitative trends linking the two methods were obtained, such as a higher excess current correlating with both higher productivity and selectivity. As such, a valuable tool is provided to increase the understanding of the electrocatalytic ability of homogeneous solutions toward improving the oxygen reduction reaction.

Direct Electrochemical CO2 Capture Using Substituted Anthraquinones in Homogeneous Solutions: A Joint Experimental and Theoretical Study.

Electrochemical capture of carbon dioxide (CO2) using organic quinones is a promising and intensively studied alternative to the industrially established scrubbing processes. While recent studies focused only on the influence of substituents having a simple mesomeric or nucleophilicity effect, we have systematically selected six anthraquinone (AQ) derivatives (X-AQ) with amino and hydroxy substituents in order to thoroughly study the influence thereof on the properties of electrochemical CO2 capture. Experimental data from cyclic voltammetry (CV) and UV-Vis spectroelectrochemistry of solutions in acetonitrile were analyzed and compared with innovative density functional tight binding computational results. Our experimental and theoretical results provide a coherent explanation of the influence of CO2 on the CV data in terms of weak and strong binding nomenclature of the dianions. In addition to this terminology, we have identified the dihydroxy substituted AQ as a new class of molecules forming rather unstable [X-AQ-(CO2) n ]2- adducts. In contrast to the commonly used dianion consideration, the results presented herein reveal opposite trends in stability for the X-AQ-CO2 •- radical species for the first time. To the best of our knowledge, this study presents theoretically calculated UV-Vis spectra for the various CO2-AQ reduction products for the first time, enabling a detailed decomposition of the spectroelectrochemical data. Thus, this work provides an extension of the existing classification with proof of the existence of X-AQ-CO2 species, which will be the basis of future studies focusing on improved materials for electrochemical CO2 capture.

Are Polyaniline and Polypyrrole Electrocatalysts for Oxygen (O2) Reduction to Hydrogen Peroxide (H2O2)?

In this report, we present results on the electrocatalytic activity of conducting polymers [polyaniline (PANI) and polypyrrole (PPy)] toward the electrochemical oxygen reduction reaction (ORR) to hydrogen peroxide (H2O2). The electropolymerization of the polymers and electrolysis conditions were optimized for H2O2 production. On flat glassy carbon (GC) electrodes, the faradaic efficiency (FE) for H2O2 production was significantly improved by the polymers. Rotating disc electrode (RDE) studies revealed that this is mainly a result of blocking further H2O2 to the water reduction pathway by the polymers. PPy on carbon paper (CP) significantly increased the molar production of H2O2 by over 250% at an average FE of above 95% compared to bare CP with a FE of 25%. Thus, the polymers are acting as catalysts on the electrode for the ORR, although their catalytic mechanisms differ from other electrocatalysts.

Biocatalytic and Bioelectrocatalytic Approaches for the Reduction of Carbon Dioxide using Enzymes.

In the recent decade, CO2 has increasingly been regarded not only as a greenhouse gas but even more as a chemical feedstock for carbon-based materials. Different strategies have evolved to realize CO2 utilization and conversion into fuels and chemicals. In particular, biological approaches have drawn attention, as natural CO2 conversion serves as a model for many processes. Microorganisms and enzymes have been studied extensively for redox reactions involving CO2. In this review, we focus on monitoring nonliving biocatalyzed reactions for the reduction of CO2 by using enzymes. We depict the opportunities but also challenges associated with utilizing such biocatalysts. Besides the application of enzymes with co-factors, resembling natural processes, and co-factor recovery, we also discuss implementation into photochemical and electrochemical techniques.

Electrochemical Capture and Release of CO2 in Aqueous Electrolytes Using an Organic Semiconductor Electrode.

Developing efficient methods for capture and controlled release of carbon dioxide is crucial to any carbon capture and utilization technology. Herein we present an approach using an organic semiconductor electrode to electrochemically capture dissolved CO2 in aqueous electrolytes. The process relies on electrochemical reduction of a thin film of a naphthalene bisimide derivative, 2,7-bis(4-(2-(2-ethylhexyl)thiazol-4-yl)phenyl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone (NBIT). This molecule is specifically tailored to afford one-electron reversible and one-electron quasi-reversible reduction in aqueous conditions while not dissolving or degrading. The reduced NBIT reacts with CO2 to form a stable semicarbonate salt, which can be subsequently oxidized electrochemically to release CO2. The semicarbonate structure is confirmed by in situ IR spectroelectrochemistry. This process of capturing and releasing carbon dioxide can be realized in an oxygen-free environment under ambient pressure and temperature, with uptake efficiency for CO2 capture of ∼2.3 mmol g-1. This is on par with the best solution-phase amine chemical capture technologies available today.

Explaining the Cyclic Voltammetry of a Poly(1,4-phenylene-ethynylene)-alt-poly(1,4-phenylene-vinylene) Copolymer upon Oxidation by using Spectroscopic Techniques.

Poly(1,4-phenylene-ethynylene)-alt-poly(1,4-phenylene-vinylene) (PPE-PPV) copolymers have attracted quite a lot of attention in the last few years for electronic device applications owing to their enhanced fluorescence. In this work, we focus on one particular PPE-PPV copolymer with dissymmetrically substituted 1,4-phenylene-ethynylene and symmetrically substituted 1,4-phenylene-vinylene building units. Six successively performed cyclic voltammograms are presented, measured during the oxidation reactions. As the oxidation onset of the electrochemical reaction shifts to lower potentials in each cycle, this behavior is elucidated by using spectroscopic techniques ranging from UV/Vis/near-IR to mid-IR including spin-resonance techniques. Hence, these findings help to explain some of the copolymer's most advantageous properties in terms of possible oxidation products.

Bio-Electrocatalytic Application of Microorganisms for Carbon Dioxide Reduction to Methane.

We present a study on a microbial electrolysis cell with methanogenic microorganisms adapted to reduce CO2 to CH4 with the direct injection of electrons and without the artificial addition of H2 or an additional carbon source except gaseous CO2 . This is a new approach in comparison to previous work in which both bicarbonate and gaseous CO2 served as the carbon source. The methanogens used are known to perform well in anaerobic reactors and metabolize H2 and CO2 to CH4 and water. This study shows the biofilm formation of those microorganisms on a carbon felt electrode and the long-term performance for CO2 reduction to CH4 using direct electrochemical reduction. CO2 reduction is performed simply by electron uptake with gaseous CO2 as the sole carbon source in a defined medium. This "electrometabolism" in such microbial electrolysis cells depends strongly on the potential applied as well as on the environmental conditions. We investigated the performance using different adaption mechanisms and a constant potential of -700 mV vs. Ag/AgCl for CH4 generation at 30-35 °C. The experiments were performed by using two-compartment electrochemical cells. Production rates with Faradaic efficiencies of around 22 % were observed.

Influence of molecular designs on polaronic and vibrational transitions in a conjugated push-pull copolymer.

Electron-phonon interactions of free charge-carriers in doped pi-conjugated polymers are conceptually described by 1-dimensional (1D) delocalization. Thereby, polaronic transitions fit the 1D-Froehlich model in quasi-confined chains. However, recent developments in conjugated polymers have diversified the backbones to become elaborate heterocylcic macromolecules. Their complexity makes it difficult to investigate the electron-phonon coupling. In this work we resolve the electron-phonon interactions in the ground and doped state in a complex push-pull polymer. We focus on the polaronic transitions using in-situ spectroscopy to work out the differences between single-unit and push-pull systems to obtain the desired structural- electronic correlations in the doped state. We apply the classic 1D-Froehlich model to generate optical model fits. Interestingly, we find the 1D-approach in push-pull polarons in agreement to the model, pointing at the strong 1D-character and plain electronic structure of the push-pull structure. In contrast, polarons in the single-unit polymer emerge to a multi- dimensional problem difficult to resolve due to their anisotropy. Thus, we report an enhancement of the 1D-character by the push-pull concept in the doped state - an important view in light of the main purpose of push-pull polymers for photovoltaic devices.

Doping-Induced Absorption Bands in P3HT: Polarons and Bipolarons.

In this work, we focus on the formation of different kinds of charge carriers such as polarons and bipolarons upon p-type doping (oxidation) of the organic semiconductor poly(3- hexylthiophene-2,5-diyl) (P3HT). We elucidate the cyclic voltammogram during oxidation of this polymer and present spectroscopic changes upon doping in the UV/Vis/near-IR range as well as in the mid-IR range. In the low-oxidation regime, two absorption bands related to sub-gap transitions appear, one in the UV/Vis range and another one in the mid-IR range. The UV/Vis absorption gradually decreases upon further doping while the mid-IR absorption shifts to lower energy. Additionally, electron paramagnetic resonance (EPR) measurements are performed, showing an increase of the EPR signal up to a certain doping level, which significantly decreases upon further doping. Furthermore, the absorption spectra in the UV/Vis range are analyzed in relation to the morphology (crystalline vs. amorphous) by using theoretical models. Finally, the calculated charge carriers from cyclic voltammogram are linked together with optical transitions as well as with the EPR signals upon p-type doping. We stress that our results indicate the formation of polarons at low doping levels and the existence of bipolarons at high doping levels. The presented spectroscopic data are an experimental evidence of the formation of bipolarons in P3HT.

Electrochemical Reduction of Carbon Dioxide to Methanol by Direct Injection of Electrons into Immobilized Enzymes on a Modified Electrode.

We present results for direct bio-electrocatalytic reduction of CO2 to C1 products using electrodes with immobilized enzymes. Enzymatic reduction reactions are well known from biological systems where CO2 is selectively reduced to formate, formaldehyde, or methanol at room temperature and ambient pressure. In the past, the use of such enzymatic reductions for CO2 was limited due to the necessity of a sacrificial co-enzyme, such as nicotinamide adenine dinucleotide (NADH), to supply electrons and the hydrogen equivalent. The method reported here in this paper operates without the co-enzyme NADH by directly injecting electrons from electrodes into immobilized enzymes. We demonstrate the immobilization of formate, formaldehyde, and alcohol dehydrogenases on one-and-the-same electrode for direct CO2 reduction. Carbon felt is used as working electrode material. An alginate-silicate hybrid gel matrix is used for the immobilization of the enzymes on the electrode. Generation of methanol is observed for the six-electron reduction with Faradaic efficiencies of around 10%. This method of immobilization of enzymes on electrodes offers the opportunity for electrochemical application of enzymatic electrodes to many reactions in which a substitution of the expensive sacrificial co-enzyme NADH is desired.

Spectroelectrochemical Studies on Quinacridone by Using Poly(vinyl alcohol) Coating as Protection Layer.

Spectroscopic measurements in the infrared range combined with electrochemistry are a powerful technique for investigation of organic semiconductors to track changes during oxidation and reduction (p- and n-doping) processes. For these measurements it is important that the studied material, mostly deposited as a thin film on an internal reflection element, does not dissolve during this characterization. In this study we introduce a technique that allows infrared spectroelectrochemical characterization of films of these materials for the first time. In many cases so far this has been impossible, due to solubility in the oxidized and/or reduced form. This novel technique is shown on thin films of quinacridone by adding a protection layer of poly(vinyl alcohol) (PVA).

Dielectric Function of Undoped and Doped Poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylene-vinylene] by Ellipsometry in a Wide Spectral Range.

Ellipsometric measurements in a wide spectral range (from 0.05 to 6.5 eV) have been carried out on the organic semiconducting polymer, poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylene-vinylene] (MDMO-PPV), in both undoped and doped states. The real and imaginary parts of the dielectric function and the refractive index are determined accurately, provided that the layer thickness is measured independently. After doping, the optical properties show the presence of new peaks, which could be well-resolved by spectroscopic ellipsometry. Also for the doped material, the complex refractive index, with respect to the dielectric function, has been determined. The broadening of the optical transitions is due to the delocalization of polarons at higher doping level. The detailed information about the dielectric function as well as refractive index function obtained by spectroscopic ellipsometry allows not only qualitative but also quantitative description of the optical properties of the undoped/doped polymer. For the direct characterization of the optical properties of MDMO-PPV, ellipsometry turns out to be advantageous compared to conventional reflection and transmission measurements.

Electrocatalytic Reduction of Carbon Dioxide to Carbon Monoxide by a Polymerized Film of an Alkynyl-Substituted Rhenium(I) Complex.

The alkynyl-substituted ReI complex [Re(5,5'-bisphenylethynyl-2,2'-bipyridyl)(CO)3Cl] was immobilized by electropolymerization onto a Pt-plate electrode. The polymerized film exhibited electrocatalytic activity for the reduction of CO2 to CO. Cyclic voltammetry studies and bulk controlled-potential electrolysis experiments were performed by using a CO2-saturated acetonitrile solution. The CO2 reduction, determined by cyclic voltammetry, occurs at approximately -1150 mV versus the normal hydrogen electrode (NHE). Quantitative analysis by GC and IR spectroscopy was used to determine a Faradaic efficiency of approximately 33 % for the formation of CO. Both values of the modified electrode were compared to the performance of the homogenous monomer [Re(5,5'-bisphenylethynyl-2,2'-bipyridyl)(CO)3Cl] in acetonitrile. The polymer formation and its properties were studied by using SEM, AFM, and attenuated total reflectance (ATR) FTIR and UV/Vis spectroscopy.

Electrochemical doping for lowering contact barriers in organic field effect transistors.

By electrochemically p-doping pentacene in the vicinity of the source-drain electrodes in organic field effect transistors the injection barrier for holes is decreased. The focus of this work is put on the influence of the p-doping process on the transistor performance. Cyclic voltammetry performed on a pentacene based transistor exhibits a reversible p-doping response. This doped state is evoked at the transistor injection electrodes. An improvement is observed when comparing transistor characteristics before and after the doping process apparent by an improved transistor on-current. This effect is reflected in the analysis of the contact resistances of the devices.

In situ FTIR spectroelectrochemical characterization of n- and p-dopable phenyl-substituted polythiophenes.

In situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroelectrochemistry during oxidation (p-doping) and reduction (n-doping) of three phenyl-substituted polythiophenes, namely POPT, PEOPT and POMeOPT is presented. All the three phenyl substituted polythiophenes show both n- and p-doping. The infrared active vibration (IRAV) patterns obtained during electrochemical oxidation (p-doping) and reduction (n-doping) are compared. HOMO and LUMO energy levels are estimated from cyclic voltammetric experiments and from IRAV patterns during oxidation and reduction. A comparison shows that the standard graphical procedure to determine the onset of oxidation and reduction peaks in the cyclic voltammogram can be improved using in situ spectroscopy.

Photoinduced electron transfer in a new Bis(C60)-phthalocyanine triad.

[Structure: see text] A novel covalently linked bis([60]fullerene)-phthalocyanine triad is reported, exhibiting long-lived photoinduced charge separation both in solution and in the solid state. The first demonstration of a working solar cell using triad 1 as the active material is also presented.

Long-lived photoinduced charges in donor-acceptor anthraquinone-substituted thiophene copolymers.

The photoinduced charge-transfer properties of a series of polyalkylthiophene copolymers, carrying anthraquinone substituents covalently linked to the conjugated backbone, have been studied in the solid state by photoinduced absorption (PA) and light-induced electron spin resonance (LESR) spectroscopy. The measurements indicate the formation of metastable charges arising from the photoinduced electron transfer from the polythiophene backbone to the anthraquinone moieties. At low temperatures (below 200 K), long-lived persistent charges are formed, exhibiting lifetimes that extend for several minutes; their recombination kinetics has been studied by following the formation and decay of the PA and LESR signals. The results are rationalized using a model originally proposed to describe the low-temperature recombination kinetics of long-lived photoexcited carriers in amorphous inorganic semiconductors. It is clearly evidenced that, in these polymers, the number of acceptor substituents in the chain, easily tuned by chemical tailoring, plays a key role in the photoexcitation scenario.

Spectroelectrochemistry of poly(ethylenedithiathiophene)--the sulfur analogue of poly(ethylenedioxythiophene).

Poly(3,4-ethylenedithiathiophene) (PEDTT) is a polythiophene-like conjugated polymer in which each thiophene ring is functionalized with an ethylenedithia bridge. As such, PEDTT is the sulfur analogue of the well-known poly(3,4-ethylenedioxythiophene) (PEDOT). Substituent effects, namely the presence of sulfur atoms in PEDTT replacing the oxygen atoms of PEDOT, do not provide a simple explanation for the different electronic properties of the two polymers in the neutral state. This paper reports the spectroscopic properties of PEDTT, studied by in situ techniques such as IR-, Vis-, and electron spin resonance (ESR) spectroelectrochemistry. The differences observed upon electrochemical oxidation of PEDTT and PEDOT (e.g., the different infrared active vibrational band patterns in IR spectroelectrochemistry as well as the different nature of the charged states) are even more marked than those observed in the neutral state. These results, with AM1 calculations, indicate conformational effects as a possible explanation for the different electronic and spectroscopic properties of PEDTT and PEDOT.

New donor-acceptor materials based on random polynorbornenes bearing pendant phthalocyanine and fullerene units.

New donor-acceptor materials based on a polynorbornene framework to which both phthalocyanine and C60 electroactive pendant units are randomly attached have been prepared in good yield by ring-opening-metathesis polymerization (ROMP) in the presence of a Grubbs catalyst. A structurally related phthalocyanine homopolymer was also synthesized for comparison. A remarkable fluorescence quenching was observed in the homopolymer and accounts for PcPc interactions along the polymeric framework. As expected, the fluorescence quenching increases in the case of the polynorbornenes containing both Pc and C60 units owing to photoinduced electron transfer, which was further confirmed by transient absorption spectroscopy. Finally, preliminary solar cell devices made of one of the copolymers were constructed.