Correction: Pickering emulsion templated proteinaceous microparticles as glutathione-responsive carriers for endocytosis in tumor cells.

Correction for 'Pickering emulsion templated proteinaceous microparticles as glutathione-responsive carriers for endocytosis in tumor cells' by Weijie Jiang et al., Nanoscale Horiz., 2024, 9, 536-543, https://doi.org/10.1039/D3NH00551H.

iso-BAI Guided Surface Recrystallization for Over 14% Tin Halide Perovskite Solar Cells.

Tin-based perovskite solar cells (PSCs) are promising environmentally friendly alternatives to their lead-based counterparts, yet they currently suffer from much lower device performance. Due to variations in the chemical properties of lead (II) and tin (II) ions, similar treatments may yield distinct effects resulting from differences in underlying mechanisms. In this work, a surface treatment on tin-based perovskite is conducted with a commonly employed ligand, iso-butylammonium iodide (iso-BAI). Unlike the passivation effects previously observed in lead-based perovskites, such treatment leads to the recrystallization of the surface, driven by the higher solubility of tin-based perovskite in common solvents. By carefully designing the solvent composition, the perovskite surface is effectively modified while preserving the integrity of the bulk. The treatment led to enhanced surface crystallinity, reduced surface strain and defects, and improved charge transport. Consequently, the best-performing power conversion efficiency of FASnI3 PSCs increases from 11.8% to 14.2%. This work not only distinguishes the mechanism of surface treatments in tin-based perovskites from that of lead-based counterparts, but also underscores the critical role in designing tailor-made strategies for fabricating efficient tin-based PSCs.

Ultrastable Iodinated Oil-Based Pickering Emulsion Enables Locoregional Sustained Codelivery of Hypoxia Inducible Factor-1 Inhibitor and Anticancer Drugs for Tumor Combination Chemotherapy.

Tumor hypoxia-associated drug resistance presents a major challenge for cancer chemotherapy. However, sustained delivery systems with a high loading capability of hypoxia-inducible factor-1 (HIF-1) inhibitors are still limited. Here, we developed an ultrastable iodinated oil-based Pickering emulsion (PE) to achieve locally sustained codelivery of a HIF-1 inhibitor of acriflavine and an anticancer drug of doxorubicin for tumor synergistic chemotherapy. The PE exhibited facile injectability for intratumoral administration, great radiopacity for in vivo examination, excellent physical stability (>1 mo), and long-term sustained release capability of both hydrophilic drugs (i.e., acriflavine and doxorubicin). We found that the codelivery of acriflavine and doxorubicin from the PE promoted the local accumulation and retention of both drugs using an acellular liver organ model and demonstrated significant inhibition of tumor growth in a 4T1 tumor-bearing mouse model, improving the chemotherapeutic efficacy through the synergistic effects of direct cytotoxicity with the functional suppression of HIF-1 pathways of tumor cells. Such an iodinated oil-based PE provides a great injectable sustained delivery platform of hydrophilic drugs for locoregional chemotherapy.

3D monitoring of the microphase separations inside the intraocular lens.

Glistenings often occur after implanting the intraocular lens (IOL) due to the formation of numerous microvacuoles (MVs) and may lead to deterioration of vision quality. Previous studies showed the formation of MVs was associated with the hydrophobicity of IOL materials. Yet, the mechanism remains an open question due to the complexity of IOL polymer networks. In this study, two commercialized IOLs with similar hydrophobicity are found distinct in the formation of MVs. The 3D growth kinetics of MVs during cooling processes are captured for the first time by digital holographic microscopy (DHM) and the components of MVs are measured by DHM and Raman spectroscopy. The results reveal that the growth of MVs stems from the microphase separation of water and surrounding IOL polymers. A polymer swelling model is thus proposed to describe the microphase separation process which is found dependent on the elasticity of IOL polymer networks. The total volume of MVs is determined by the IOL hydrophobicity, while the elastic force of IOL polymer networks determines the number density and size of MVs. This study demonstrates an approach for characterizing the phase separation of crosslinked polymeric materials in biosystems and sheds lights on the refinement of IOL materials. STATEMENT OF SIGNIFICANCE: Glistenings due to the formation of numerous microvacuoles (MVs) in intraocular lens (IOL) can occur after IOL implantation, which may induce poor quality of vision. However, the underlying mechanism of MVs formation is still an open question. This study establishes an in-situ 3D imaging platform to monitor growth kinetics of the MVs in IOLs, which allows to uncover the mechanism of glistenings formation resulting from the microphase separation. The findings imply the material hydrophobicity influences the total volume of MVs, while the local elasticity of IOL polymer networks determines the number density and the size of MVs. This study offers a new approach for characterizing phase separation in crosslinking biosystems and sheds lights on the refinement of IOL materials.

Porous Waterborne Polyurethane Films Templated from Pickering Foams for Fabrication of Synthetic Leather.

Waterborne polyurethane (WPU) latex nanoparticles with proven interfacial activity were utilized to stabilize air-water interfaces of Pickering foams through interfacial interaction with hydrophobic fumed silica particles (SPs). The rheological properties of the Pickering foam were tailored through adjustment of their SP content, which influenced their formability and stability. A Pickering foam stabilized with WPU and SPs was used as a template to prepare a WPU-SP composite porous film. The as-prepared film had intact open-cell porous structures, which increased its water absorption and water-vapor permeability. The porous film was used as a middle layer in the preparation of synthetic leather via a four-step "drying method". Compared with commercial synthetic leather, the lab-made synthetic leather with a middle layer made of the WPU-SP composite porous film exhibited a richer porous structure, acceptable wetting on a fabric substrate, a thicker porous layer, and higher water-vapor permeability. This work provides a novel and facile approach for preparing WPU-SP Pickering foams. Furthermore, the foams have the potential to function as a sustainable material for creating a porous-structured synthetic leather made from WPU, which may be utilized as an alternative to solvent-based synthetic leather.

Pickering emulsion templated proteinaceous microparticles as glutathione-responsive carriers for endocytosis in tumor cells.

The use of glucose oxidase (GOx) to disrupt glucose supply has been identified as a promising strategy in cancer starvation therapy. However, independent delivery of GOx is prone to degradation upon exposure to biological conditions and may cause damage to blood vessels and normal organs during transportation. Although some carriers can protect GOx from the surrounding environment, the harsh preparation conditions may compromise its activity. Moreover, the commonly used materials often exhibit poor biocompatibility and possess certain cytotoxicity. To address this issue, we developed a gentle and efficient method based on Pickering emulsion templates to synthesize protein-based microparticles using zein as the matrix material. These microparticles have high stability and can be tailored to efficiently encapsulate biomolecules while preserving their activity. Moreover, the zein-based microparticles can be triggered to release biomolecules in tumor cells under high glutathione levels, demonstrating excellent responsiveness, biocompatibility, and low cytotoxicity. Additionally, when loaded with GOx, these protein-based microparticles effectively deprive tumor cells of nutrients and induce apoptosis by generating high levels of H2O2, thereby exhibiting enhanced anticancer properties.

Celebrating 60 Years of The Chinese University of Hong Kong: Research Highlights in Nanoscience and Nanotechnology.

Recent breakthroughs and advances in nanoscience and nanotechnology have profoundly impacted young-generation education, accelerated knowledge transfer to enhance the quality of life, and improved environmental and economic sustainability. The Chinese University of Hong Kong (CUHK), a globally recognized education and research institute, has played a crucial role in promoting major strategic research directions in nanoscience, including translational biomedicine and information and automation technology, as well as environment and sustainability. To celebrate the 60th Anniversary of CUHK, we present this Virtual Issue that showcases the cutting-edge research at CUHK published in ACS Nano.

Dual-responsive colloidosome-like microgels as the building blocks for phase inversion of Pickering emulsions.

The intelligent regulation of microgel-stabilized Pickering emulsions with multi-responsiveness is presently constrained to the processes of emulsification and destabilization. However, the expansion of multi-control over Pickering emulsions to involve phase inversion and the investigation of the accompanying processes and mechanisms present a great challenge. In this study, a microgel with dual responsiveness to both pH and temperature was synthesized using an emulsion template. The resulting microgel exhibited a robust colloidosome-like structure, distinguished by the presence of monolayer-adsorbed silica nanoparticles. The regulation of the packing of surface-covered silica nanoparticles was easily achieved through the swelling of the microgel matrix. Furthermore, the wettability of the microgel can be adjusted between hydrophilic and hydrophobic intervals, allowing for the effective and dual-responsive phase inversion of Pickering emulsions. Moreover, it has been observed that colloidosome-like microgels can lead to unique interfacial structures during the emulsification process, thereby elucidating the fundamental mechanism governing emulsion phase inversion.

Temperature-Responsive Pickering Double Emulsions Stabilized by Binary Microgels.

Microgels are excellent emulsifiers that can self-assemble to reduce interfacial tension and form a steric barrier at an oil-water interface. Herein, we report a two-step emulsification approach to prepare oil-in-water-in-oil (O/W/O) Pickering double emulsions through the dispersion of microgels in two immiscible phases. The stabilization mechanism depends on the uneven distribution and adsorption of hydrophilic water-swollen microgels and hydrophobic octanol-swollen microgels on either outer water droplets or inner oil droplets. Our results reveal that binary microgels outperformed single microgels in terms of interfacial tension reduction and emulsion stabilization. Notably, the binary microgel-stabilized Pickering double emulsions show excellent temperature responsiveness owing to the intrinsic thermal sensitivity of microgels. Consequently, the selective and rapid release of encapsulated substances in different phases can be achieved through the adjustment of the ambient temperature.

Water-resistance chitosan film through enzymatic treatment and layer-by-layer assembly with bacterial cellulose for food packaging materials.

The pervasive presence of plastic packaging has led to significant environmental contamination due to excessive reliance on petrochemicals and the inherent non-biodegradability of these materials. Both bacterial cellulose (BC) and chitosan (CT) films offer a promising option for food packaging purposes due to their sturdy mechanical strength, biodegradability, environmentally friendly manufacturing process, and non-toxic composition. However, the considerable moisture absorption capacity of these eco-friendly materials has hindered their extensive use, as it leads to a reduction in their strength and ability to serve as a barrier. In the present study, we introduced a composite material of BC reinforced with a lauryl gallate grafted CT coating. After grafting CT with lauryl gallate (CT-LG) through enzymatic modification, it showed excellent hydrophobic properties also in a green route of chemistry synthesis. Based on the results of the study, the duration of the water droplet test of the pure CT-LG film and BC coated with CT-LG (BC/CT-LG) films was more than 15 min, showing that water droplets can be completely blocked by the CT-LG coating without water penetration. For the mechanical properties, the wet flexural strength and wet tensile strength of BC/CT-LG films have improved 400% and 70% compared with the original BC. This method produces a composite material with enhanced hydrophobicity and green properties and shows great potential for use in drinking straws or packaging bags.

Development and Optimal Immune Strategy of an Alum-Stabilized Pickering emulsion for Cancer Vaccines.

Therapeutic cancer vaccines are considered as one of the most cost-effective ways to eliminate cancer cells. Although many efforts have been invested into improving their therapeutic effect, transient maturation and activations of dendritic cells (DCs) cause weak responses and hamper the subsequent T cell responses. Here, we report on an alum-stabilized Pickering emulsion (APE) that can load a high number of antigens and continue to release them for extensive maturation and activations of antigen-presenting cells (APCs). After two vaccinations, APE/OVA induced both IFN-γ-secreting T cells (Th1) and IL-4-secreting T cells (Th2), generating effector CD8+ T cells against tumor growth. Additionally, although they boosted the cellular immune responses in the spleen, we found that multiple administrations of cancer vaccines (three or four times in 3-day intervals) may increase the immunosuppression with more PD-1+ CD8+ and LAG-3+ CD8+ T cells within the tumor environment, leading to the diminished overall anti-tumor efficacy. Combining this with anti-PD-1 antibodies evidently hindered the suppressive effect of multiple vaccine administrations, leading to the amplified tumor regression in B16-OVA-bearing mice.

Light-Driven Spatiotemporal Pickering Emulsion Droplet Manipulation Enabled by Plasmonic Hybrid Microgels.

The past decades have witnessed the development of various stimuli-responsive materials with tailored functionalities, enabling droplet manipulation through external force fields. Among different strategies, light exhibits excellent flexibility for contactless control of droplets, particularly in three-dimensional space. Here, we present a facile synthesis of plasmonic hybrid microgels based on the electrostatic heterocoagulation between cationic microgels and anionic Au nanoparticles. The hybrid microgels are effective stabilizers of oil-in-water Pickering emulsions. In addition, the laser irradiation on Au nanoparticles creats a "cascade effect" to thermally responsive microgels, which triggers a change in microgel wettability, resulting in microgel desorption and emulsion destabilization. More importantly, the localized heating generated by a focused laser induces the generation of a vapor bubble inside oil droplets, leading to the formation of a novel air-in-oil-in-water (A/O/W) emulsion. These A/O/W droplets are able to mimic natural microswimmers in an aqueous environment by tracking the motion of a laser spot, thus achieving on-demand droplet merging and chemical communication between isolated droplets. Such proposed systems are expected to extend the applications of microgel-stabilized Pickering emulsions for substance transport, programmed release and controlled catalytic reactions.

Total internal reflection microscopy: a powerful tool for exploring interactions and dynamics near interfaces.

The occurrence of many micro/macrophenomena is closely related to interactions and dynamics near interfaces. Hence, developing powerful tools for characterizing near-interface interactions and dynamics has attached great importance among researchers. In this review, we introduce a noninvasive and ultrasensitive technique called total internal reflection microscopy (TIRM). The principles of TIRM are introduced first, demonstrating the characteristics of this technique. Then, typical measurements with TIRM and the recent development of the technique are reviewed in detail. At the end of the review, we highlight the great progress of TIRM during the past several decades and show its potential to be more influential in measuring interactions and dynamics near interfaces in various research fields.

Edible, strong, and low-hygroscopic bacterial cellulose derived from biosynthesis and physical modification for food packaging.

BACKGROUND: The pervasive presence of plastic packaging has led to significant environmental contamination due to excessive reliance on petrochemicals and the inherent non-biodegradability of these materials. Bacterial cellulose (BC) films present a viable alternative for food packaging applications, owing to their environmentally friendly synthesis process, non-toxic nature, robust mechanical strength, and biodegradability. However, the high hygroscopicity of such bio-based materials has limited their widespread adoption, as it results in diminished strength and barrier properties. In this study, a novel approach for creating edible, transparent, robust, and high-barrier BC-based composite packaging was proposed through biosynthesis with the incorporation of soy protein isolate and the physical interpenetration of calcium alginate-polyethylene glycol as a composite coating. RESULTS: The finding demonstrated that the synthesized bio-based composite material exhibits stability in water, high optical transparency, complete oil resistance, and full degradability within 1 to 2 months. Furthermore, the composite material displayed enhanced mechanical properties in both dry and wet conditions, with a tensile strength of approximately 84 MPa, outperforming commercially available kraft paper and low-density polyethylene. CONCLUSIONS: Soy protein isolate established a rigid, coherent, and homogeneous network with BC fibrils, thereby augmenting mechanical properties. Calcium alginate can be effectively combined with BC, utilizing polyethylene glycol as a binder and plasticizer, to generate a densely packed structure with reduced hygroscopicity. This bio-based composite material demonstrated considerable potential for application in food packaging and other value-added sectors as a substitute for non-degradable plastics. © 2023 Society of Chemical Industry.

Editorial for the Special Issue "Advances in Colloidal Hydrogels".

Hydrogels are three-dimensional polymer networks derived from hydrophilic macromonomers, which can be categorized as natural, synthetic, or hybrid hydrogels [...].

Inside-out assembly of viral antigens for the enhanced vaccination.

Current attempts in vaccine delivery systems concentrate on replicating the natural dissemination of live pathogens, but neglect that pathogens evolve to evade the immune system rather than to provoke it. In the case of enveloped RNA viruses, it is the natural dissemination of nucleocapsid protein (NP, core antigen) and surface antigen that delays NP exposure to immune surveillance. Here, we report a multi-layered aluminum hydroxide-stabilized emulsion (MASE) to dictate the delivery sequence of the antigens. In this manner, the receptor-binding domain (RBD, surface antigen) of the spike protein was trapped inside the nanocavity, while NP was absorbed on the outside of the droplets, enabling the burst release of NP before RBD. Compared with the natural packaging strategy, the inside-out strategy induced potent type I interferon-mediated innate immune responses and triggered an immune-potentiated environment in advance, which subsequently boosted CD40+ DC activations and the engagement of the lymph nodes. In both H1N1 influenza and SARS-CoV-2 vaccines, rMASE significantly increased antigen-specific antibody secretion, memory T cell engagement, and Th1-biased immune response, which diminished viral loads after lethal challenge. By simply reversing the delivery sequence of the surface antigen and core antigen, the inside-out strategy may offer major implications for enhanced vaccinations against the enveloped RNA virus.

Blockage of Osteopontin-Integrin ß3 Signaling in Infrapatellar Fat Pad Attenuates Osteoarthritis in Mice.

The knowledge of osteoarthritis (OA) has nowadays been extended from a focalized cartilage disorder to a multifactorial disease. Although recent investigations have reported that infrapatellar fat pad (IPFP) can trigger inflammation in the knee joint, the mechanisms behind the role of IPFP on knee OA progression remain to be defined. Here, dysregulated osteopontin (OPN) and integrin ß3 signaling are found in the OA specimens of both human and mice. It is further demonstrated that IPFP-derived OPN participates in OA progression, including activated matrix metallopeptidase 9 in chondrocyte hypertrophy and integrin ß3 in IPFP fibrosis. Motivated by these findings, an injectable nanogel is fabricated to provide sustained release of siRNA Cd61 (RGD- Nanogel/siRNA Cd61) that targets integrins. The RGD- Nanogel possesses excellent biocompatibility and desired targeting abilities both in vitro and in vivo. Local injection of RGD- Nanogel/siRNA Cd61 robustly alleviates the cartilage degeneration, suppresses the advancement of tidemark, and reduces the subchondral trabecular bone mass in OA mice. Taken together, this study provides an avenue for developing RGD- Nanogel/siRNA Cd61 therapy to mitigate OA progression via blocking OPN-integrin ß3 signaling in IPFP.

Injectable magnesium oxychloride cement foam-derived scaffold for augmenting osteoporotic defect repair.

HYPOTHESIS: Cement augmentation has been widely applied to promote osteoporotic fracture healing, whereas the existing calcium-based products suffer from the excessively slow degradation, which may impede bone regeneration. Magnesium oxychloride cement (MOC) shows promising biodegradation tendency and bioactivity, which is expected to be a potential alternative to the classic calcium-based cement for hard-tissue-engineering applications. EXPERIMENTS: Here, a hierarchical porous MOC foam (MOCF)-derived scaffold with favorable bio-resorption kinetic and superior bioactivity is fabricated through Pickering foaming technique. Then, a systematic characterization in terms of material properties and in vitro biological performance have been conducted to evaluate the feasibility of the as-prepared MOCF scaffold to be a bone-augmenting material for treating osteoporotic defects. FINDINGS: The developed MOCF shows excellent handling performance in the paste state, while exhibiting sufficient load-bearing capacity after solidification. In comparison with the traditional bone cement, calcium deficient hydroxyapatite (CDHA), our porous MOCF scaffold demonstrates a much higher biodegradation tendency and better cell recruitment ability. Additionally, the eluted bioactive ions by MOCF commits to a biologically inductive microenvironment, where the in vitro osteogenesis is significantly enhanced. It is anticipated that this advanced MOCF scaffold will be competitive for clinical therapies to augment osteoporotic bone regeneration.

Capturing coacervate formation and protein partition by molecular dynamics simulation.

Biomolecules localize and function in microenvironments where their local concentration, spatial organization, and biochemical reactivity are regulated. To compartmentalize and control the local properties of the native microenvironment, cellular mimics and artificial bioreactors have been developed to study the properties of membraneless organelles or mimic the bio-environment for life origin. Here, we carried out molecular dynamics simulation with the Martini 3.0 model to reproduce the experimental salt concentration and pH dependency of different complex coacervates. We showed that coacervates inside vesicles are able to change their shape. In addition, we used these coacervate systems to explore the partitioning of the ubiquitous cytoskeletal protein actin and found that actin spontaneously partitions to all the coacervate peripheries. Therefore, we believe that our study can provide a better understanding of the versatile coacervate platform, where biomolecules partition and gather to fulfill their biological duties.

Phase Inversion of Pickering Emulsions Induced by Interfacial Electrostatic Attraction.

Phase inversion of Pickering emulsions from water-in-oil (W/O) to oil-in-water (O/W) is achieved by the formation of an interfacial particle bilayer using negatively charged and positively charged particles dispersed in water and oil, respectively, before emulsification. A mechanism based on electrostatic attraction across the toluene-water interface is proposed and verified by systematic investigation of the parameters that affect the surface charge of negatively charged particles such as pH and salt concentration. Cationic silica-FITC particles (600 nm) can be dispersed in toluene and stabilize W/O emulsions alone; phase inversion of this emulsion can be induced by the addition of anionic silica-RB particles in the aqueous phase at a concentration of 1.0 wt % or above. It is revealed that silica-RB particles of a smaller size (100 nm) can induce emulsion phase inversion at a much lower concentration (0.4 wt %) and an interfacial particle bilayer is clearly revealed by CLSM and SEM images. By tuning the surface charge density of silica-RB particles, the electrostatic attraction mechanism leading to the formation of the interfacial particle bilayer is confirmed and emulsion stability can be tuned as demonstrated by osmotic pressure enhancement results obtained from centrifugation.