Enhanced cellular uptake of platinum by a tetracationic Pt(II) nanocapsule and its implications to cancer treatment.

Despite the known limitations of cisplatin chemotherapy, the treatment of cancer by platinum-based drugs remains the method of choice for many oncologists. The advancement in drug delivery formulations and protocols of combined treatments provided effective tools to ameliorate the side effects of platinum-based therapies. Another approach to improve the pharmacological profiles of anticancer platinum drugs is to properly modify their structure and composition, which has produced numerous platinum complexes with improved therapeutic effect. Recently, we have demonstrated the strong anticancer potency of supramolecular nanocapsules that form by self-assembly of four bis-anthracene ligands with two metal ions, either Pt(II) or Pd(II). Herein, we focus our study on the Pt(II) nanocapsule and its uptake by two types of cancer cells, suspension cultures of HL-60 cells and the adherent cancer cells HT-29. Comparison of the platinum uptake by cancer cells treated with the nanocapsule and with cisplatin evidenced superior uptake of platinum caused by the nanocapsule, which in HT-29 and HL-60 cells prevails by 21 and 31 times, respectively. Morphological changes in the HL-60 cells induced by the Pt(II) nanocapsule were studied by transmission electron microscopy (TEM) which provided plausible explanation of the uptake results. These data corroborate also with the known nanocapsule's very high cytotoxicity, better selectivity, and lack of cross-resistance with cisplatin. Additionally, our estimations of the drug-drug interactions in combined treatments established the propensity of the nanocapsule to exert supra-additive cytotoxicity in combination with cisplatin against the bladder cancer T-24 cells. All these findings define the scope for more detailed pharmacological characterization of the presented Pt(II) nanocapsule.

Storage performance of Mg2+ substituted NaMnPO4 with an olivine structure.

Sodium manganese phospho-olivine, NaMnPO4, is considered to be a higher-voltage alternative to the presently used iron-based electrode material, NaFePO4, for sodium ion batteries. Irrespective of this advantage, the electrochemical performance of NaMnPO4 is still far from what is desired. Herein we provide the first report on the storage performance of NaMnPO4 having a structure modified by Mg2+ substitution. The Mg-substituted phospho-olivines are prepared on the basis of ionic exchange reactions involving the participation of Mg-substituted KMnPO4·H2O dittmarites as structural template. Furthermore, the phosphate particles were covered with a thin layer (up to 5 nm) of activated carbon through ball-milling. The storage performance of phospho-olivines is analyzed in sodium and lithium half-ion cells, as well as in full-ion cells versus bio-mass derived activated carbon and spinel Li4Ti5O12 as anodes. The compatibility of phospho-olivines with electrolytes is assessed by utilization of several types of lithium and sodium carbonate-based solutions. In sodium half-cell, the Mg-substituted phosphate displays a multi-phase mechanism of Na+ intercalation in case when NaTFSI-based electrolyte is used. In lithium half-cell, the high specific capacity and rate capability is achieved for phospho-olivine cycled in LiPF6-based electrolyte. This is a consequence of the occurrence of dual Li+,Na+ intercalation, which encompass nano-sized domains. The utilization of the Mg-substituted phospho-olivine in the full ion cell is demonstrated.

Layered P3-NaxCo1/3Ni1/3Mn1/3O2 versus Spinel Li4Ti5O12 as a Positive and a Negative Electrode in a Full Sodium-Lithium Cell.

The development of lithium and sodium ion batteries without using lithium and sodium metal as anodes gives the impetus for elaboration of low-cost and environmentally friendly energy storage devices. In this contribution we demonstrate the design and construction of a new type of hybrid sodium-lithium ion cell by using unique electrode combination (Li4Ti5O12 spinel as a negative electrode and layered Na3/4Co1/3Ni1/3Mn1/3O2 as a positive electrode) and conventional lithium electrolyte (LiPF6 salt dissolved in EC/DMC). The cell operates at an average potential of 2.35 V by delivering a reversible capacity of about 100 mAh/g. The mechanism of the electrochemical reaction in the full sodium-lithium ion cell is studied by means of postmortem analysis, as well as ex situ X-ray diffraction analysis, HR-TEM, and electron paramagnetic resonance spectroscopy (EPR). The changes in the surface composition of electrodes are examined by ex situ X-ray photoelectron spectroscopy (XPS).

Structural insights into M2O-Al2O3-WO3 (M = Na, K) system by electron diffraction tomography.

The M2O-Al2O3-WO3 (M = alkaline metals) system has attracted the attention of the scientific community because some of its members showed potential applications as single crystalline media for tunable solid-state lasers. These materials behave as promising laser host materials due to their high and continuous transparency in the wide range of the near-IR region. A systematic investigation of these phases is nonetheless hampered because it is impossible to produce large crystals and only in a few cases a pure synthetic product can be achieved. Despite substantial advances in X-ray powder diffraction methods, structure investigation on nanoscale is still challenging, especially when the sample is polycrystalline and the structures are affected by pseudo-symmetry. Electron diffraction has the advantage of collecting data from single nanoscopic crystals, but it is frequently limited by incompleteness and dynamical effects. Automated diffraction tomography (ADT) recently emerged as an alternative approach able to collect more complete three-dimensional electron diffraction data and at the same time to significantly reduce dynamical scattering. ADT data have been shown to be suitable for ab initio structure solution of phases with large cell parameters, and for detecting pseudo-symmetry that was undetected in X-ray powder data. In this work we present the structure investigation of two hitherto undetermined compounds, K5Al(W3O11)2 and NaAl(WO4)2, by a combination of electron diffraction tomography and precession electron diffraction. We also stress how electron diffraction tomography can be used to obtain direct information about symmetry and pseudo-symmetry for nanocrystalline phases, even when available only in polyphasic mixtures.

A fractal-like electrode based on double-wall nanotubes of anatase exhibiting improved electrochemical behaviour in both lithium and sodium batteries.

An anatase nanotube array has been prepared with a special morphology: two concentric walls and a very small central cavity. The method used here to achieve the double-wall structure is a single-step anodization process under a voltage ramp. Thanks to this nanostructure, which is equivalent to a fractal electrode, the electrochemical behaviour is improved, and the specific capacity is higher in both lithium and sodium cells due to pseudocapacitance. The double-wall structure of the nanotube enhances the surface of TiO2 being in contact with the electrolyte solution, thus allowing an easy penetration of the alkali ions into the electrode active material. The occurrence of sodium titanate in the electrode material after electrochemical reaction with sodium is studied by using EPR, HRTEM and NMR experiments.

P3-Type Layered Sodium-Deficient Nickel-Manganese Oxides: A Flexible Structural Matrix for Reversible Sodium and Lithium Intercalation.

Sodium-deficient nickel-manganese oxides exhibit a layered structure, which is flexible enough to acquire different layer stacking. The effect of layer stacking on the intercalation properties of P3-Nax Ni0.5 Mn0.5 O2 (x=0.50, 0.67) and P2-Na2/3 Ni1/3 Mn2/3 O2 , for use as cathodes in sodium- and lithium-ion batteries, is examined. For P3-Na0.67 Ni0.5 Mn0.5 O2 , a large trigonal superstructure with 2√3 a×2√3 a×2 c is observed, whereas for P2-Na2/3 Ni1/3 Mn2/3 O2 there is a superstructure with reduced lattice parameters. In sodium cells, P3 and P2 phases intercalate sodium reversibly at a well-expressed voltage plateau. Preservation of the P3-type structure during sodium intercalation determines improving cycling stability of the P3 phase within an extended potential range, in comparison with that for the P2 phase, for which a P2-O2 phase transformation has been found. Between 2.0 and 4.0 V, P3 and P2 phases display an excellent rate capability. In lithium cells, the P3 phase intercalates lithium, accompanied by a P3-O3 structural transformation. The in situ generated O3 phase, containing lithium and sodium simultaneously, determines the specific voltage profile of P3-Nax Ni0.5 Mn0.5 O2 . The P2 phase does not display any reversible lithium intercalation. The P3 phase demonstrates a higher capacity at lower rates in lithium cells, whereas in sodium cells P3-Nax Ni0.5 Mn0.5 O2 operates better at higher rates. These findings reveal the unique ability of sodium-deficient nickel-manganese oxides with a P3-type structure for application as low-cost electrode materials in both sodium- and lithium-ion batteries.

Submicron silica spheres decorated with silver nanoparticles as a new effective sorbent for inorganic mercury in surface waters.

An analytical method using silica supported silver nanoparticles as a novel sorbent for the enrichment and determination of inorganic mercury (iHg) in surface water samples has been developed. Silver nanoparticles (AgNPs) were synthesized by a completely green procedure and were deposited onto the amine functionalized surface of silica submicrospheres (SiO2-NH2). The prepared nanocomposite material (SiO2/AgNPs) was characterized by transmission electron microscopy, UV-vis spectroscopy, X-ray diffraction and atomic force microscopy. The sorption and desorption characteristics of the nanosorbent SiO2/AgNPs toward Hg species were investigated by a batch method. An excellent separation of iHg and methylHg was achieved in 20 minutes at pH 2. The high selectivity of the SiO2/AgNPs toward iHg was explained by Hg(ii) reduction and subsequent silver-mercury amalgam formation. The analytical procedure for the enrichment and determination of inorganic mercury in surface waters was developed based on solid phase extraction and ICP-MS measurements. The total Hg content was determined after water sample mineralization. The recoveries reached for iHg in different surface waters e.g. river and Black sea water samples varied from 96-101%. The limits of quantification are 0.002 µg L(-1) and 0.004 µg L(-1) for iHg and total Hg, respectively; the relative standard deviations varied in the ranges of 5-9% and 6-11% for iHg and total Hg, respectively, for Hg content from 0.005 to 0.2 µg L(-1). The accuracy of the procedure developed for total Hg determination was confirmed by a comparative analysis of surface river (ICP-MS) and sea (CV AFS) waters.