RESUMEN
BACKGROUND: Pretreatment of lignocellulose for biochemical conversion commonly results in formation of by-products that inhibit microorganisms and cellulolytic enzymes. To make bioconversion processes more efficient, inhibition problems can be alleviated through conditioning. Ozone is currently commercially employed in pulp and paper production for bleaching, as it offers the desirable capability to disrupt unsaturated bonds in lignin through an ionic reaction known as ozonolysis. Ozonolysis is more selective towards lignin than cellulose, for instance, when compared to other oxidative treatment methods, such as Fenton's reagent. Ozone may thus have desirable properties for conditioning of pretreated lignocellulose without concomitant degradation of cellulose or sugars. Ozone treatment of SO2-impregnated steam-pretreated Norway spruce was explored as a potential approach to decrease inhibition of yeast and cellulolytic enzymes. This novel approach was furthermore compared to some of the most effective methods for conditioning of pretreated lignocellulose, i.e., treatment with alkali and sodium dithionite. RESULTS: Low dosages of ozone decreased the total contents of phenolics to about half of the initial value and improved the fermentability. Increasing ozone dosages led to almost proportional increase in the contents of total acids, including formic acid, which ultimately led to poor fermentability at higher ozone dosages. The decrease of the contents of furfural and 5-hydroxymethylfurfural was inversely proportional (R (2) > 0.99) to the duration of the ozone treatment, but exhibited no connection with the fermentability. Ozone detoxification was compared with other detoxification methods and was superior to treatment with Fenton's reagent, which exhibited no positive effect on fermentability. However, ozone detoxification was less efficient than treatment with alkali or sodium dithionite. High ozone dosages decreased the inhibition of cellulolytic enzymes as the glucose yield was improved with 13 % compared to that of an untreated control. CONCLUSIONS: Low dosages of ozone were beneficial for the fermentation of steam-pretreated Norway spruce, while high dosages decreased the inhibition of cellulolytic enzymes by soluble components in the pretreatment liquid. While clearly of interest for conditioning of lignocellulosic hydrolysates, future challenges include finding conditions that provide beneficial effects both with regard to enzymatic saccharification and microbial fermentation.
RESUMEN
Bioconversion of lignocellulose by microbial fermentation is typically preceded by an acidic thermochemical pretreatment step designed to facilitate enzymatic hydrolysis of cellulose. Substances formed during the pretreatment of the lignocellulosic feedstock inhibit enzymatic hydrolysis as well as microbial fermentation steps. This review focuses on inhibitors from lignocellulosic feedstocks and how conditioning of slurries and hydrolysates can be used to alleviate inhibition problems. Novel developments in the area include chemical in-situ detoxification by using reducing agents, and methods that improve the performance of both enzymatic and microbial biocatalysts.
RESUMEN
Increased recirculation of process water has given rise to problems with formation of calcium oxalate incrusts (scaling) in the pulp and paper industry and in forest biorefineries. The potential in using oxalate decarboxylase from Aspergillus niger for oxalic acid removal in industrial bleaching plant filtrates containing oxalic acid was examined and compared with barley oxalate oxidase. Ten different filtrates from chemical pulping were selected for the evaluation. Oxalate decarboxylase degraded oxalic acid faster than oxalate oxidase in eight of the filtrates, while oxalate oxidase performed better in one filtrate. One of the filtrates inhibited both enzymes. The potential inhibitory effect of selected compounds on the enzymatic activity was tested. Oxalate decarboxylase was more sensitive than oxalate oxidase to hydrogen peroxide. Oxalate decarboxylase was not as sensitive to chlorate and chlorite as oxalate oxidase. Up to 4 mM chlorate ions, the highest concentration tested, had no inhibitory effect on oxalate decarboxylase. Analysis of the filtrates suggests that high concentrations of chlorate present in some of the filtrates were responsible for the higher sensitivity of oxalate oxidase in these filtrates. Oxalate decarboxylase was thus a better choice than oxalate oxidase for treatment of filtrates from chlorine dioxide bleaching.
Asunto(s)
Carboxiliasas/metabolismo , Residuos Industriales , Oxidorreductasas/metabolismo , Aspergillus niger/enzimología , Inhibidores Enzimáticos/metabolismo , Proteínas Fúngicas/metabolismo , Hordeum/enzimología , Microbiología Industrial , Ácido Oxálico/metabolismo , Proteínas de Plantas/metabolismoRESUMEN
A recombinant Aspergillus niger strain expressing the Hypocrea jecorina endoglucanase Cel7B was grown on spent hydrolysates (stillage) from sugarcane bagasse and spruce wood. The spent hydrolysates served as excellent growth media for the Cel7B-producing strain, A. niger D15[egI], which displayed higher endoglucanase activities in the spent hydrolysates than in standard medium with a comparable monosaccharide content (e.g., 2,100 nkat/ml in spent bagasse hydrolysate compared to 480 nkat/ml in standard glucose-based medium). In addition, A. niger D15[egI] was also able to consume or convert other lignocellulose-derived compounds, such as acetic acid, furan aldehydes, and phenolic compounds, which are recognized as inhibitors of yeast during ethanolic fermentation. The results indicate that enzymes can be produced from the stillage stream as a high-value coproduct in second-generation bioethanol plants in a way that also facilitates recirculation of process water.
Asunto(s)
Aspergillus niger/enzimología , Aspergillus niger/metabolismo , Celulasa/metabolismo , Lignina/metabolismo , Proteínas Recombinantes/metabolismo , Ácido Acético/metabolismo , Aspergillus niger/genética , Aspergillus niger/crecimiento & desarrollo , Celulasa/genética , Furanos/metabolismo , Hypocrea/enzimología , Hypocrea/genética , Fenoles/metabolismo , Proteínas Recombinantes/genéticaRESUMEN
Industrial production of bioethanol from fibers that are unusable for pulp production in pulp mills offers an approach to product diversification and more efficient exploitation of the raw material. In an attempt to utilize fibers flowing to the biological waste treatment, selected fiber sludges from three different pulp mills were collected, chemically analyzed, enzymatically hydrolyzed, and fermented for bioethanol production. Another aim was to produce solid residues with higher heat values than those of the original fiber sludges to gain a better fuel for combustion. The glucan content ranged between 32 and 66% of the dry matter. The lignin content varied considerably (1-25%), as did the content of wood extractives (0.2-5.8%). Hydrolysates obtained using enzymatic hydrolysis were found to be readily fermentable using Saccharomyces cerevisiae. Hydrolysis resulted in improved heat values compared with corresponding untreated fiber sludges. Oligomeric xylan fragments in the solid residue obtained after enzymatic hydrolysis were identified using matrix-assisted laser desorption ionization-time of flight and their potential as a new product of a pulp mill-based biorefinery is discussed.
Asunto(s)
Celulosa/metabolismo , Etanol/metabolismo , Residuos Industriales/prevención & control , Lignina/metabolismo , Papel , Saccharomyces cerevisiae/metabolismo , Aguas del Alcantarillado/microbiología , Estudios de FactibilidadRESUMEN
The potential of dilute-acid prehydrolysis as a pretreatment method for sugarcane bagasse, rice hulls, peanut shells, and cassava stalks was investigated. The prehydrolysis was performed at 122 degrees C during 20, 40, or 60 min using 2% H(2)SO(4) at a solid-to-liquid ratio of 1:10. Sugar formation increased with increasing reaction time. Xylose, glucose, arabinose, and galactose were detected in all of the prehydrolysates, whereas mannose was found only in the prehydrolysates of peanut shells and cassava stalks. The hemicelluloses of bagasse were hydrolyzed to a high-extent yielding concentrations of xylose and arabinose of 19.1 and 2.2 g/L, respectively, and a xylan conversion of more than 80%. High-glucose concentrations (26-33.5 g/L) were found in the prehydrolysates of rice hulls, probably because of hydrolysis of starch of grain remains in the hulls. Peanut shells and cassava stalks rendered low amounts of sugars on prehydrolysis, indicating that the conditions were not severe enough to hydrolyze the hemicelluloses in these materials quantitatively. All prehydrolysates were readily fermentable by Saccharomyces cerevisiae. The dilute-acid prehydrolysis resulted in a 2.7- to 3.7-fold increase of the enzymatic convertibility of bagasse, but was not efficient for improving the enzymatic hydrolysis of peanut shells, cassava stalks, or rice hulls.
Asunto(s)
Agricultura/métodos , Celulasa/metabolismo , Celulosa/metabolismo , Etanol/metabolismo , Residuos Industriales/prevención & control , Saccharomyces cerevisiae/metabolismo , Ácidos Sulfúricos/químicaRESUMEN
Alkaline detoxification strongly improves the fermentability of dilute-acid hydrolysates in the production of bioethanol from lignocellulose with Saccharomyces cerevisiae. New experiments were performed with NH4OH and NaOH to define optimal conditions for detoxification and make a comparison with Ca(OH)2 treatment feasible. As too harsh conditions lead to sugar degradation, the detoxification treatments were evaluated through the balanced ethanol yield, which takes both the ethanol production and the loss of fermentable sugars into account. The optimization treatments were performed as factorial experiments with 3-h duration and varying pH and temperature. Optimal conditions were found roughly in an area around pH 9.0/60 degrees C for NH4OH treatment and in a narrow area stretching from pH 9.0/80 degrees C to pH 12.0/30 degrees C for NaOH treatment. By optimizing treatment with NH4OH, NaOH, and Ca(OH)2, it was possible to find conditions that resulted in a fermentability that was equal or better than that of a reference fermentation of a synthetic sugar solution without inhibitors, regardless of the type of alkali used. The considerable difference in the amount of precipitate generated after treatment with different types of alkali appears critical for industrial implementation.
Asunto(s)
Celulosa/química , Celulosa/metabolismo , Etanol/metabolismo , Lignina/química , Lignina/metabolismo , Picea/química , Saccharomyces cerevisiae/metabolismo , Hidróxido de Sodio/química , Ácidos Sulfúricos/química , Álcalis/química , Álcalis/aislamiento & purificación , Medios de Cultivo/química , Medios de Cultivo/metabolismo , Estudios de Factibilidad , Concentración de Iones de Hidrógeno , Hidrólisis , Control de CalidadRESUMEN
When dilute-acid hydrolysates from spruce are fermented to produce ethanol, detoxification is required to make the hydrolysates fermentable at reasonable rates. Treatment with alkali, usually by overliming, is one of the most efficient approaches. Several nutrients, such as ammonium and phosphate, are added to the hydrolysates prior to fermentation. We investigated the use of NH4OH for simultaneous detoxification and addition of nitrogen source. Treatment with NH4OH compared favorably with Ca(OH)2, Mg(OH)2, Ba(OH)2, and NaOH to improve fermentability using Saccharomyces cerevisiae. Analysis of monosaccharides, furan aldehydes, phenols, and aliphatic acids was performed after the different treatments. The NH4OH treatments, performed at pH 10.0, resulted in a substantial decrease in the concentrations of furfural and hydroxymethylfurfural. Under the conditions studied, NH4OH treatments gave better results than Ca(OH)2 treatments. The addition of an extra nitrogen source in the form of NH4Cl at pH 5.5 did not result in any improvement in fermentability that was comparable to NH4OH treatments at alkaline conditions. The addition of CaCl2 or NH4Cl at pH 5.5 after treatment with NH4OH or Ca(OH)2 resulted in poorer fermentability, and the negative effects were attributed to salt stress. The results strongly suggest that the highly positive effects of NH4OH treatments are owing to chemical conversions rather than stimulation of the yeast cells by ammonium ions during the fermentation.
Asunto(s)
Ácidos/química , Técnicas de Cultivo de Célula/métodos , Celulosa/metabolismo , Etanol/metabolismo , Hidróxidos/química , Lignina/metabolismo , Picea/metabolismo , Picea/microbiología , Saccharomyces cerevisiae/metabolismo , Hidróxido de Amonio , Celulosa/química , Medios de Cultivo/química , Medios de Cultivo/metabolismo , Concentración de Iones de Hidrógeno , Hidrólisis , Lignina/química , Picea/química , Saccharomyces cerevisiae/químicaRESUMEN
Bioethanol can be produced from wood via acid hydrolysis, but detoxification is needed to achieve good fermentability. Overliming was investigated in a factorial designed experiment, in which pH and temperature were varied. Degradation of inhibitory furan aldehydes was more extensive compared to monosaccharides. Too harsh conditions led to massive degradation of sugars and formation of inhibiting acids and phenols. The ethanol productivity and yield after optimal overliming reached levels exceeding reference fermentations of pure glucose. A novel metric, the balanced ethanol yield, which takes both ethanol production and losses of fermentable sugars into account, was introduced and showed the optimal conditions within the investigated range. The findings allow process technical and economical considerations to govern the choice of conditions for overliming.
Asunto(s)
Compuestos de Calcio/química , Técnicas de Cultivo de Célula/métodos , Celulosa/metabolismo , Medios de Cultivo/química , Etanol/metabolismo , Lignina/metabolismo , Modelos Biológicos , Óxidos/química , Picea/microbiología , Saccharomyces cerevisiae/metabolismo , Reactores Biológicos/microbiología , Celulosa/química , Técnicas Químicas Combinatorias/métodos , Simulación por Computador , Medios de Cultivo/metabolismo , Etanol/química , Fermentación/fisiología , Concentración de Iones de Hidrógeno , Hidrólisis , Lignina/química , Picea/química , Saccharomyces cerevisiae/crecimiento & desarrollo , Ácidos Sulfúricos/química , TemperaturaRESUMEN
Oxalate oxidase catalyses the degradation of oxalic acid to carbon dioxide and hydrogen peroxide and is of commercial importance for clinical analyses of oxalate in biological samples. Novel potential applications for oxalate oxidase include the prevention of the formation of calcium oxalate incrusts in pulp and paper manufacture and rapid determination of oxalic acid in process waters. The potential in using oxalate-degrading enzymes in industrial processes increases the interest in finding systems for heterologous expression. Oxalate oxidase from barley is a secreted multimeric glycosylated manganese-containing enzyme with several disulfide bridges, which have been found to be essential for the catalytic activity. Attempts to achieve expression of active heterologous oxalate oxidase in bacteria have up to now met little success. In this study, one oxalate-oxidase-encoding cDNA from barley and two from wheat were cloned and tested with regard to expression in Escherichia coli. The results suggest that the selection of a novel commercially available E. coli host strain, which has the ability to form disulfide bridges in heterologous proteins expressed in its cytoplasm, was important for successful expression. Although a considerable part of the heterologous protein was produced in an insoluble and inactive form, this strain, E. coli Origami B(DE3), in addition yielded soluble and active barley and wheat oxalate oxidase. One of the wheat cDNAs, Ta(M)OXO1, gave three-fold higher activity than the barley cDNA, Hv(H)OXO1, while the other wheat cDNA, Ta(M)OXO2, gave no detectable activity. This indicates that the choice of cDNA was also critical despite the high identity between the cDNAs and the encoded polypeptides (88-89% on the nucleotide level and 88-92% on the amino-acid level). Gel filtration of cell extracts containing heterologous barley and wheat oxalate oxidase resulted in an increase in the activity. This indicates that low molecular weight inhibitory compounds were present in the E. coli lysates but could be removed by the introduction of a purification step.
Asunto(s)
Escherichia coli/genética , Hordeum/enzimología , Oxidorreductasas/genética , Triticum/enzimología , Secuencia de Aminoácidos , Clonación Molecular , ADN Complementario/análisis , Escherichia coli/metabolismo , Vectores Genéticos/genética , Glutatión Reductasa/genética , Hordeum/genética , Datos de Secuencia Molecular , Mutación , Oxidorreductasas/metabolismo , Reductasa de Tiorredoxina-Disulfuro/genética , Triticum/genéticaRESUMEN
Six anion-exchange resins with different properties were compared with respect to detoxification of a dilute-acid hydrolysate of spruce prior to ethanolic fermentation with Saccharomyces cerevisiae. The six resins encompassed strong and weak functional groups as well as styrene-, phenol-, and acrylic-based matrices. In an analytical experimental series, fractions from columns packed with the different resins were analyzed regarding pH, glucose, furfural, hydroxymethylfurfural, phenolic compounds, levulinic acid, acetic acid, formic acid, and sulfate. An initial adsorption of glucose occurred in the strong alkaline environment and led to glucose accumulation at a later stage. Acetic and levulinic acid passed through the column before formic acid, whereas sulfate had the strongest affinity. In a preparative experimental series, one fraction from each of six columns packed with the different resins was collected for assay of the fermentability and analysis of glucose, mannose, and fermentation inhibitors. The fractions collected from strong anion-exchange resins with styrene-based matrices displayed the best fermentability: a sevenfold enhancement of ethanol productivity compared with untreated hydrolysate. Fractions from a strong anion exchanger with acrylic-based matrix and a weak exchanger with phenol-based resin displayed an intermediate improvement in fermentability, a four- to fivefold increase in ethanol productivity. The fractions from two weak exchangers with styrene- and acrylic-based matrices displayed a twofold increase in ethanol productivity. Phenolic compounds were more efficiently removed by resins with styrene- and phenol-based matrices than by resins with acrylic-based matrices.
Asunto(s)
Cromatografía por Intercambio Iónico/instrumentación , Hidrolisados de Proteína/química , Resinas de Intercambio Aniónico/química , Aniones , Cromatografía por Intercambio Iónico/métodos , Etanol/química , Fermentación , Glucosa/química , Concentración de Iones de Hidrógeno , Hidrólisis , Fenol/química , Picea , Saccharomyces cerevisiae/metabolismoRESUMEN
A new method for rapid determination of oxalic acid was developed using oxalate oxidase and a biosensor based on SIRE (sensors based on injection of the recognition element) technology. The method was selective, simple, fast, and cheap compared with other present detection systems for oxalate. The total analysis time for each assay was 2-9 min. A linear range was observed between 0 and 5 mM when the reaction conditions were 30 degrees C and 60 s. The linear range and upper limit for concentration determination could be increased to 25 mM by shortening the reaction time. The lower limit of detection in standard solutions, 20 microM, could be achieved by means of modification of the reaction conditions, namely increasing the temperature and the reaction time. The biosensor method was compared with a conventional commercially available colorimetric method with respect to the determination of oxalic acid in urine samples. The urine oxalic acid concentrations determined with the biosensor method correlated well (R=0.952) with the colorimetric method.
Asunto(s)
Técnicas Biosensibles/métodos , Electroquímica/métodos , Análisis de Inyección de Flujo/métodos , Ácido Oxálico/análisis , Ácido Oxálico/química , Oxidorreductasas/química , Urinálisis/métodos , Técnicas Biosensibles/instrumentación , Electroquímica/instrumentación , Análisis de Inyección de Flujo/instrumentación , Humanos , Control de Calidad , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Temperatura , Urinálisis/instrumentaciónRESUMEN
In addition to fermentable sugars, dilute-acid hydrolysates of lignocellulose contain compounds that inhibit fermenting microorganisms, such as Saccharomyces cerevisiae. Previous results show that phenolic compounds and furan aldehydes, and to some extent aliphatic acids, act as inhibitors during fermentation of dilute-acid hydrolysates of spruce. Treatment of lignocellulose hydrolysates with alkali, usually in the form of overliming to pH 10.0, has been frequently employed as a detoxification method to improve fermentability. A spruce dilute-acid hydrolysate was treated with NaOH in a factorial design experiment, in which the pH was varied between 9.0 and 12.0, the temperature between 5 and 80 degrees C, and the time between 1 and 7 h. Already at pH 9.0, >25% of the glucose was lost when the hydrolysate was treated at 80 degrees C for 1 h. Among the monosaccharides, xylose was degraded faster under alkaline conditions than the hexoses (glucose, mannose, and galactose), which, in turn, were degraded faster than arabinose. The results suggest that alkali treatment of hydrolysates can be performed at temperatures below 30 degrees C at any pH between 9.0 and 12.0 without problems with sugar degradation or formation of inhibiting aliphatic acids. Treatment with Ca(OH)2 instead of NaOH resulted in more substantial degradation of sugars. Under the harsher conditions of the factorial design experiment, the concentrations of furfural and 5-hydroxymethylfurfural decreased while the total phenolic content increased. The latter phenomenon was tentatively attributed to fragmentation of soluble aromatic oligomers in the hydrolysate. Separate phenolic compounds were affected in different ways by the alkaline conditions with some compounds showing an increase in concentration while others decreased. In conclusion, the conditions used for detoxification with alkali should be carefully controlled to optimize the positive effects and minimize the degradation of fermentable sugars.
Asunto(s)
Celulosa/farmacocinética , Combustibles Fósiles , Inactivación Metabólica , Lignina/farmacocinética , Hidróxido de Calcio , Celulosa/aislamiento & purificación , Cromatografía Líquida de Alta Presión , Electrólitos/aislamiento & purificación , Fermentación , Concentración de Iones de Hidrógeno , Hidrólisis , Indicadores y Reactivos , Lignina/aislamiento & purificación , Picea/metabolismo , Saccharomyces cerevisiae/metabolismo , Hidróxido de Sodio , TermodinámicaRESUMEN
This work describes a novel approach to detoxify lignocellulosic hydrolysates and facilitate the analysis of inhibitory compounds, namely supercritical fluid extraction (SFE). The efficiency of the fermentation of lignocellulosic dilute-acid hydrolysates depends upon the composition of the hydrolysate and the organism used. Furthermore, it has been shown that inhibitors in the hydrolysate reduce the fermentation yield. This knowledge has given rise to the need to identify and remove the inhibiting compounds. Sample clean-up or work-up steps, to provide a clean and concentrated sample for the analytical system, facilitate the characterization of inhibitors, or indeed any compound in the hydrolysates. Removal of inhibitors was performed with countercurrent flow supercritical fluid extraction of liquid hydrolysates. Three different groups of inhibitors (furan derivatives, phenolic compounds, and aliphatic acids) and sugars were subsequently analyzed in the hydrolysate, extracted hydrolysate, and extract. The effect of the SFE treatment was examined with respect to fermentability with Saccharomyces cerevisiae. Not only did the extraction provide a clean and concentrated sample (extract) for analysis, but also a hydrolysate with increased fermentability as well as lower concentrations of inhibitors such as phenolics and furan derivatives.
Asunto(s)
Dióxido de Carbono/farmacocinética , Cromatografía con Fluido Supercrítico/métodos , Etanol/metabolismo , Lignina/aislamiento & purificación , Lignina/metabolismo , Picea/metabolismo , Reactores Biológicos , Celulosa/aislamiento & purificación , Celulosa/metabolismo , Cromatografía con Fluido Supercrítico/instrumentación , Inhibidores Enzimáticos/metabolismo , Ácidos Grasos/análisis , Ácidos Grasos/metabolismo , Fermentación , Furaldehído/análisis , Furaldehído/metabolismo , Hidrólisis , Inactivación Metabólica , Fenoles/análisis , Fenoles/metabolismo , Picea/efectos de los fármacosRESUMEN
Treatment with alkali, particularly overliming, has been widely used as a method for the detoxification of lignocellulose hydrolysates prior to ethanolic fermentation. However, the mechanisms behind the detoxification effect and the influence of the choice of cation have not been well understood. In this study, a dilute acid hydrolysate of spruce and an inhibitor cocktail consisting of six known inhibitors were used to investigate different alkali detoxification methods. The various treatments included the addition of calcium hydroxide, sodium hydroxide, potassium hydroxide, and ammonia to pH 10.0 and subsequent adjustment of the pH to 5.5 with either sulfuric or hydrochloric acid as well as treatment with the corresponding amounts of calcium, sodium, and potassium as sulfate or chloride salts at pH 5.5. An RP-HPLC method was developed for the separation of 18 different inhibitors in the hydrolysate, including furaldehydes and phenolics. Detection and quantification were carried out by means of UV, DAD, and ESI-MS in negative mode. Treatment of the spruce hydrolysate with alkali resulted in up to approximately 40% decrease in the concentration of furaldehydes. The effects on the aromatic compounds were complex. Furthermore, SFE was performed on the precipitate formed during alkali treatment to evaluate the inhibitor content of the precipitate, and the following RP-HPLC analysis implied that potential inhibitors were removed mainly through conversion rather than through filtration of precipitate. Parallel experiments in which sulfuric acid or hydrochloric acid was used for acidification to pH 5.5 after alkali treatment indicated that the choice of anion did not affect the removal of inhibitors. Detoxification with calcium hydroxide and ammonia resulted in better fermentability using Saccharomyces cerevisiae than detoxification with sodium hydroxide. The results from the experiments with the inhibitor cocktail indicated that the positive effects of alkali treatment are difficult to explain by removal of the inhibitors only and that possible stimulatory effects on the fermenting organism warrant further attention.
Asunto(s)
Celulosa/metabolismo , Etanol/metabolismo , Fermentación , Lignina/metabolismo , Ácido Acético/análisis , Ácido Acético/farmacología , Amoníaco/farmacología , Calcio/análisis , Hidróxido de Calcio/farmacología , Carbohidratos/análisis , Cromatografía Líquida de Alta Presión , Ácidos Cumáricos/farmacología , Formiatos/análisis , Formiatos/farmacología , Furaldehído/farmacología , Concentración de Iones de Hidrógeno , Hidrólisis , Hidróxidos/farmacología , Compuestos de Potasio/farmacología , Hidróxido de Sodio/farmacologíaRESUMEN
Acid hydrolysis of lignocellulose to hydrolysates intended for production of fuel ethanol results in the formation of byproducts in addition to fermentable sugars. Some of the byproducts, such as phenolic compounds and furan aldehydes, are inhibitory to the fermenting microorganism. Detoxification of the hydrolysates may be necessary for production of ethanol at a satisfactory rate and yield. The lignin residue obtained after hydrolysis is a material with hydrophobic properties that is produced in large amounts as a byproduct within an ethanol production process based on lignocellulosic raw materials. We have explored the possibility of using this lignin residue for detoxification of spruce dilute-acid hydrolysates prior to fermentation with Saccharomyces cerevisiae. Three dilute-acid hydrolysates of spruce were treated with lignin residue, which in all cases resulted in improved fermentability in terms of productivity and yield of ethanol. The effect was improved by washing the lignin before treatment, by using larger amounts of lignin in the treatment, and by performing the treatment at low temperature. Treatment with the lignin residue removed up to 53% of the phenolic compounds and up to 68% of the furan aldehydes in a spruce dilute-acid hydrolysate. A larger fraction of furfural was removed compared to the less hydrophobic 5-hydroxymethylfurfural.
Asunto(s)
Celulosa/farmacocinética , Combustibles Fósiles , Lignina/farmacocinética , Biotecnología/métodos , Fermentación , Inactivación Metabólica , Saccharomyces cerevisiae/crecimiento & desarrollo , Saccharomyces cerevisiae/metabolismoRESUMEN
Sugarcane bagasse is a potential lignocellulosic feedstock for ethanol production, since it is cheap, readily available, and has a high carbohydrate content. In this work, bagasse was subjected to steam explosion pretreatment with different impregnation conditions. Three parallel pretreatments were carried out, one without any impregnation, a second with sulfur dioxide, and a third with sulfuric acid as the impregnating agent. The pretreatments were performed at 205 degrees C for 10 min. The pretreated material was then hydrolyzed using cellulolytic enzymes. The chemical composition of the hydrolyzates was analyzed. The highest yields of xylose (16.2 g/100 g dry bagasse), arabinose (1.5 g/100 g), and total sugar (52.9 g/100 g) were obtained in the hydrolysis of the SO2 -impregnated bagasse. The H2SO4 -impregnated bagasse gave the highest glucose yield (35.9 g/100 g) but the lowest total sugar yield (42.3 g/100 g) among the three methods. The low total sugar yield from the H2SO4-impregnated bagasse was largely due to by-product formation, as the dehydration of xylose to furfural. Sulfuric acid impregnation led to a three-fold increase in the concentration of the fermentation inhibitors furfural and 5-hydroxymethylfurfural (HMF) and a two-fold increase in the concentration of inhibitory aliphatic acids (formic, acetic, and levulinic acids) compared to the other two pretreatment methods. The total content of phenolic compounds was not strongly affected by the different pretreatment methods, but the quantities of separate phenolic compounds were widely different in the hydrolyzate from the H2SO4-impregnated bagasse compared with the other two hydrolyzates. No major differences in the content of inhibitors were observed in the hydrolyzates obtained from SO2-impregnated and non-impregnated bagasse. The fermentability of all three hydrolyzates was tested with a xylose-utilizing Saccharomyces cerevisiae strain with and without nutrient supplementation. The hydrolyzates of SO2-impregnated and nonimpregnated bagasse showed similar fermentability, whereas the hydrolyzate of H2SO4-impregnated bagasse fermented considerably poorer.