RESUMEN
[This corrects the article DOI: 10.1371/journal.pone.0256090.].
RESUMEN
The oldest Oldowan tool sites, from around 2.6 million years ago, have previously been confined to Ethiopia's Afar Triangle. We describe sites at Nyayanga, Kenya, dated to 3.032 to 2.581 million years ago and expand this distribution by over 1300 kilometers. Furthermore, we found two hippopotamid butchery sites associated with mosaic vegetation and a C4 grazer-dominated fauna. Tool flaking proficiency was comparable with that of younger Oldowan assemblages, but pounding activities were more common. Tool use-wear and bone damage indicate plant and animal tissue processing. Paranthropus sp. teeth, the first from southwestern Kenya, possessed carbon isotopic values indicative of a diet rich in C4 foods. We argue that the earliest Oldowan was more widespread than previously known, used to process diverse foods including megafauna, and associated with Paranthropus from its onset.
Asunto(s)
Evolución Biológica , Dieta , Conducta Alimentaria , Hominidae , Animales , Huesos , Fósiles , Kenia , Plantas , PaleontologíaRESUMEN
The Early Pleistocene site of Dmanisi is now well known for its large number of fossils of early Homo erectus as well as associated artifacts and faunal remains, recovered mainly in pipe-related geologic features. Testing in the M5 unit 100 m to the west of the main excavations revealed a thick stratigraphy with no evidence of pipes or gullies, indicating that the geologic record at Dmanisi included spatially distinct sedimentary environments that needed further investigation. Here we report the results of a geoarchaeological program to collect data bearing on contexts and formation processes over a large area of the promontory. That work has defined over 40,000 m2 of in situ deposits with artifacts and faunas. Stratum A ashes bury the uppermost Mashavera Basalt, which we have dated to 1.8 Ma in the M5 block. The Stratum A deposits contain stratified occupations that accumulated quickly and offer good potential for recovery of in situ materials. Stratum B1 deposits above the A/B unconformity include all of the pipe and gully facies at Dmanisi, reflecting a brief but very intense phase of geomorphic change. Those deposits contain the majority of faunas and all of the hominin fossils. B1 slope facies offer excellent formation contexts away from the piped area, and all B1 deposits are sealed by Stratum B2 over the whole promontory. Strata B2 to B5 register a return to slope facies, with no further evidence of pipes or gullies. Those deposits also present excellent contexts for recovery of in situ occupations. Overall, Dmanisi's geologic history preserves an exceptional record of the activities and environmental context of occupations during the first colonization of Eurasia.
Asunto(s)
Hominidae , Animales , Facies , Fósiles , GeologíaRESUMEN
The use of bone as raw material for implements is documented since the Early Pleistocene. Throughout the Early and Middle Pleistocene bone tool shaping was done by percussion flaking, the same technique used for knapping stone artifacts, although bone shaping was rare compared to stone tool flaking. Until recently the generally accepted idea was that early bone technology was essentially immediate and expedient, based on single-stage operations, using available bone fragments of large to medium size animals. Only Upper Paleolithic bone tools would involve several stages of manufacture with clear evidence of primary flaking or breaking of bone to produce the kind of fragments required for different kinds of tools. Our technological and taphonomic analysis of the bone assemblage of Castel di Guido, a Middle Pleistocene site in Italy, now dated by 40Ar/39Ar to about 400 ka, shows that this general idea is inexact. In spite of the fact that the number of bone bifaces at the site had been largely overestimated in previous publications, the number of verified, human-made bone tools is 98. This is the highest number of flaked bone tools made by pre-modern hominids published so far. Moreover the Castel di Guido bone assemblage is characterized by systematic production of standardized blanks (elephant diaphysis fragments) and clear diversity of tool types. Bone smoothers and intermediate pieces prove that some features of Aurignacian technology have roots that go beyond the late Mousterian, back to the Middle Pleistocene. Clearly the Castel di Guido hominids had done the first step in the process of increasing complexity of bone technology. We discuss the reasons why this innovation was not developed. The analysis of the lithic industry is done for comparison with the bone industry.
Asunto(s)
Fósiles/historia , Tecnología/métodos , Animales , Arqueología , Huesos , Diáfisis , Elefantes/anatomía & histología , Historia Antigua , Hominidae , Humanos , Industrias/métodos , Materiales Manufacturados/historiaRESUMEN
Tektites are terrestrial impact-generated glasses that are ejected long distance (up to 11,000 km), share unique characteristics and have a poorly understood formation process. Only four tektite strewn-fields are known, and three of them are sourced from known impact craters. Here we show that the recently discovered Pantasma impact crater (14 km diameter) in Nicaragua is the source of an impact glass strewn-field documented in Belize 530 km away. Their cogenesis is documented by coincidental ages, at 804 ± 9 ka, as well as consistent elemental compositions and isotopic ratios. The Belize impact glass share many characteristics with known tektites but also present several peculiar features. We propose that these glasses represent a previously unrecognized tektite strewn-field. These discoveries shed new light on the tektite formation process, which may be more common than previously claimed, as most known Pleistocene >10 km diameter cratering events have generated tektites.
RESUMEN
Cereals are a central resource for the human diet and are traditionally assumed to have evolved from wild grasses at the onset of the Neolithic under the pressure of agriculture. Here we demonstrate that cereals may have a significantly longer and more diverse lineage, based on the study of a 0-2.3 Ma, 601 m long sedimentary core from Lake Acigöl (South-West Anatolia). Pollen characteristic of cereals is abundant throughout the sedimentary sequence. The presence of large lakes within this arid bioclimatic zone led to the concentration of large herbivore herds, as indicated by the continuous occurrence of coprophilous fungi spores in the record. Our hypothesis is that the effects of overgrazing on soils and herbaceous stratum, during this long period, led to genetic modifications of the Poaceae taxa and to the appearance of proto-cereals. The simultaneous presence of hominins is attested as early as about 1.4 Ma in the lake vicinity, and 1.8 Ma in Georgia and Levant. These ancient hominins probably benefited from the availability of these proto-cereals, rich in nutrients, as well as various other edible plants, opening the way, in this region of the Middle East, to a process of domestication, which reached its full development during the Neolithic.
Asunto(s)
Evolución Biológica , Domesticación , Grano Comestible/historia , Herbivoria , Hominidae , Animales , Historia Antigua , HumanosRESUMEN
We present the study of a composite, yet continuous sedimentary succession covering the time interval spanning 2.6-0.36 Ma in the intramontane basin of Anagni (central Italy) through a dedicated borecore, field surveys, and the review of previous data at the three palaeontological and archaeological sites of Colle Marino, Coste San Giacomo and Fontana Ranuccio. By combining the magneto- and chronostratigraphic data with sedimentologic and biostratigraphic analysis, we describe the palaeogeographic and tectonic evolution of this region during this entire interval. In this time frame, starting from 0.8 Ma, the progressive shallowing and temporary emersion of the large lacustrine basins and alluvial plains created favorable conditions for early hominin occupation of the area, as attested by abundant tool industry occurrences and fossils. This study provides new constraints to better interpret the hominin migratory dynamics and the factors that influenced the location and spatial distribution during the early occupation of this region.
RESUMEN
Notarchirico (Southern Italy) has yielded the earliest evidence of Acheulean settlement in Italy and four older occupation levels have recently been unearthed, including one with bifaces, extending the roots of the Acheulean in Italy even further back in time. New 40Ar/39Ar on tephras and ESR dates on bleached quartz securely and accurately place these occupations between 695 and 670 ka (MIS 17), penecontemporaneous with the Moulin-Quignon and la Noira sites (France). These new data demonstrate a very rapid expansion of shared traditions over Western Europe during a period of highly variable climatic conditions, including interglacial and glacial episodes, between 670 and 650 (i.e., MIS17/MIS16 transition). The diversity of tools and activities observed in these three sites shows that Western Europe was populated by adaptable hominins during this time. These conclusions question the existence of refuge areas during intense glacial stages and raise questions concerning understudied migration pathways, such as the Sicilian route.
RESUMEN
[This corrects the article DOI: 10.1371/journal.pone.0218591.].
RESUMEN
For the past decade, debates on the earliest evidence of bifacial shaping in Western Europe have focused on several key issues, such as its origin (i.e., local or introduced), or on what should define the Acheulean culture. Whatever hypotheses are proposed for its origin, the onset and technological strategies for making Large Cutting Tools (LCTs), including biface production, are key issues and are often associated with other behavioural changes, such as increased core technology complexity. Current archaeological patterns do not support the existence of transitional industries. Rather, the scant evidence suggests that biface production associated with the management of bifacial volume was widespread around 700 ka. Among the earliest sites, the site of Notarchirico in Southern Italy stands out as one of the most significant examples. 40Ar/39Ar ages and ESR dates recently provided a revised chronology for the whole sedimentary sequence and constrained the archaeological levels between ca. 610 and 670 ka. Five archaeosurfaces (A, A1, B, D and F) yielded LCTs, including bifaces, during Marcello Piperno's excavations from 1980 to 1995. In light of this new chronological framework, which is much shorter than previously thought, we propose in this contribution a revision of the bifaces by applying the "chaine opératoire" method for the first time (analysis of reduction processes). Our goals are to assess biface production in this early Western European locality and to characterize the strategies applied at the site throughout the sequence. A corpus of 32 tools was selected from the A-A1, B, D and F archaeosurfaces. The technological analysis shows that hominins had the capacity to manage bifacial volumes, when raw material quality was adequate. Clear differences do not emerge between the different levels in terms of shaping modes or final forms. However, we demonstrate that the oldest level (level F), with the richest corpus, lacks flint and displays a higher diversity of bifaces. This ability to manage bifacial and bilateral equilibrium, as well as the diversity of the morphological results, is observed in a few penecontemporaneous sites (700-600 ka), both in the north-western and southern parts of Western Europe. These patterns suggest that hominins mastered well-controlled and diversified biface production, combining intense shaping and minimal shaping, and shared a common technological background regardless of the geographical area, and applied this technology regardless of the available raw materials. The degree of skill complexity of hominins in Western Europe between 700 and 600 ka, the current lack of evidence suggesting "gradual industries" between core-and-flake series and Acheulean techno-complexes, raise numerous questions on the origin of new behaviours in Western Europe, their mode of diffusion, and their association with Homo heidelbergensis or other Middle Pleistocene populations.
RESUMEN
Mediterranean climates are characterized by strong seasonal contrasts between dry summers and wet winters. Changes in winter rainfall are critical for regional socioeconomic development, but are difficult to simulate accurately1 and reconstruct on Quaternary timescales. This is partly because regional hydroclimate records that cover multiple glacial-interglacial cycles2,3 with different orbital geometries, global ice volume and atmospheric greenhouse gas concentrations are scarce. Moreover, the underlying mechanisms of change and their persistence remain unexplored. Here we show that, over the past 1.36 million years, wet winters in the northcentral Mediterranean tend to occur with high contrasts in local, seasonal insolation and a vigorous African summer monsoon. Our proxy time series from Lake Ohrid on the Balkan Peninsula, together with a 784,000-year transient climate model hindcast, suggest that increased sea surface temperatures amplify local cyclone development and refuel North Atlantic low-pressure systems that enter the Mediterranean during phases of low continental ice volume and high concentrations of atmospheric greenhouse gases. A comparison with modern reanalysis data shows that current drivers of the amount of rainfall in the Mediterranean share some similarities to those that drive the reconstructed increases in precipitation. Our data cover multiple insolation maxima and are therefore an important benchmark for testing climate model performance.
Asunto(s)
Clima , Lluvia , Estaciones del Año , África , Región Mediterránea , Modelos TeóricosRESUMEN
The Late Pleistocene Campanian Ignimbrite (CI) super-eruption (Southern Italy) is the largest known volcanic event in the Mediterranean area. The CI tephra is widely dispersed through western Eurasia and occurs in close stratigraphic association with significant palaeoclimatic and Palaeolithic cultural events. Here we present new high-precision 14C (34.29 ± 0.09 14C kyr BP, 1σ) and 40Ar/39Ar (39.85 ± 0.14 ka, 95% confidence level) dating results for the age of the CI eruption, which substantially improve upon or augment previous age determinations and permit fuller exploitation of the chronological potential of the CI tephra marker. These results provide a robust pair of 14C and 40Ar/39Ar ages for refining both the radiocarbon calibration curve and the Late Pleistocene time-scale at ca. 40 ka. In addition, these new age constraints provide compelling chronological evidence for the significance of the combined influence of the CI eruption and Heinrich Event 4 on European climate and potentially evolutionary processes of the Early Upper Palaeolithic.
RESUMEN
We present here the results of a technological and typological analysis of the Acheulian and early Middle Paleolithic assemblages from Torre in Pietra (Latium, Italy) together with comparisons with the Acheulian small tools of Castel di Guido. The assemblages were never chronometrically dated before. We have now 40Ar/39Ar dates and ESR-U-series dates, within a geomorphological framework, which support correlations to marine isotope stages. The Acheulian (previously correlated to MIS 9) is now dated to MIS 10 while the Middle Paleolithic is dated to MIS 7. Lithic analyses are preceded by taphonomic evaluations. The Levallois method of the Middle Paleolithic assemblage is an innovation characterized by the production of thin flake blanks without cortex. In contrast, the small tool blanks of the Acheulian were either pebbles or thick flakes with some cortex. They provided a relatively easy manual prehension. The choice of Levallois thin flake blanks in the Middle Paleolithic assemblage suggest that the new technology is most likely related to the emergence of hafting. Accordingly, the oldest direct evidence of hafting technology is from the site of Campitello Quarry in Tuscany (Central Italy) where birch-bark tar, found on the proximal part of two flint flakes, is dated to the end of MIS 7. Nevertheless, a peculiar feature of the Middle Paleolithic at Torre in Pietra is the continuous presence of small tool blanks on pebbles and cores and on thick flake albeit at a much lower frequency than in the older Acheulian industries. The adoption of the new technology is thus characterized by innovation combined with a degree of stability. The persistence of these habits in spite of the introduction of an innovative technique underlies the importance of cultural transmission and conformity in the behavior of Neandertals.
Asunto(s)
Arqueología , Hombre de Neandertal , Tecnología , Animales , Fósiles , Italia , Comportamiento del Uso de la HerramientaRESUMEN
Among the paintings and engravings found in the Chauvet-Pont d'Arc cave (Ardèche, France), several peculiar spray-shape signs have been previously described in the Megaloceros Gallery. Here we document the occurrence of strombolian volcanic activity located 35 km northwest of the cave, and visible from the hills above the cave entrance. The volcanic eruptions were dated, using 40Ar/39Ar, between 29 ± 10 ka and 35 ± 8 ka (2σ), which overlaps with the 14C AMS and thermoluminescence ages of the first Aurignacian occupations of the cave in the Megaloceros Gallery. Our work provides the first evidence of an intense volcanic activity between 40 and 30 ka in the Bas-Vivarais region, and it is very likely that Humans living in the Ardèche river area witnessed one or several eruptions. We propose that the spray-shape signs found in the Chauvet-Pont d'Arc cave could be the oldest known depiction of a volcanic eruption, predating by more than 34 ka the description by Pliny the Younger of the Vesuvius eruption (AD 79) and by 28 ka the Çatalhöyük mural discovered in central Turkey.
Asunto(s)
Erupciones Volcánicas/historia , Arqueología , Argón/química , Cuevas , Francia , Historia Antigua , Humanos , Isótopos , Pinturas/historia , Datación RadiométricaRESUMEN
Isernia La Pineta (south-central Italy, Molise) is one of the most important archaeological localities of the Middle Pleistocene in Western Europe. It is an extensive open-air site with abundant lithic industry and faunal remains distributed across four stratified archaeosurfaces that have been found in two sectors of the excavation (3c, 3a, 3s10 in sect. I; 3a in sect. II). The prehistoric attendance was close to a wet environment, with a series of small waterfalls and lakes associated to calcareous tufa deposits. An isolated human deciduous incisor (labelled IS42) was discovered in 2014 within the archaeological level 3 coll (overlying layer 3a) that, according to new 40Ar/39Ar measurements, is dated to about 583-561 ka, i.e. to the end of marine isotope stage (MIS) 15. Thus, the tooth is currently the oldest human fossil specimen in Italy; it is an important addition to the scanty European fossil record of the Middle Pleistocene, being associated with a lithic assemblage of local raw materials (flint and limestone) characterized by the absence of handaxes and reduction strategies primarily aimed at the production of small/medium-sized flakes. The faunal assemblage is dominated by ungulates often bearing cut marks. Combining chronology with the archaeological evidence, Isernia La Pineta exhibits a delay in the appearance of handaxes with respect to other European Palaeolithic sites of the Middle Pleistocene. Interestingly, this observation matches the persistence of archaic morphological features shown by the human calvarium from the Middle Pleistocene site of Ceprano, not far from Isernia (south-central Italy, Latium). In this perspective, our analysis is aimed to evaluate morphological features occurring in IS42.
Asunto(s)
Arqueología , Humanos , ItaliaRESUMEN
The recovery at Shi'bat Dihya 1 (SD1) of a dense Middle Paleolithic human occupation dated to 55 ka BP sheds new light on the role of the Arabian Peninsula at the time of the alleged expansion of modern humans out of Africa. SD1 is part of a complex of Middle Paleolithic sites cut by the Wadi Surdud and interstratified within an alluvial sedimentary basin in the foothills that connect the Yemeni highlands with the Tihama coastal plain. A number of environmental proxies indicate arid conditions throughout a sequence that extends between 63 and 42 ka BP. The lithic industry is geared toward the production of a variety of end products: blades, pointed blades, pointed flakes and Levallois-like flakes with long unmodified cutting edges, made from locally available rhyolite. The occasional exploitation of other local raw materials, that fulfill distinct complementary needs, highlights the multi-functional nature of the occupation. The slightly younger Shi'bat Dihya 2 (SD2) site is characterized by a less elaborate production of flakes, together with some elements (blades and pointed flakes) similar to those found at SD1, and may indicate a cultural continuity between the two sites. The technological behaviors of the SD1 toolmakers present similarities with those documented from a number of nearly contemporaneous assemblages from southern Arabia, the Levant, the Horn of Africa and North Africa. However, they do not directly conform to any of the techno-complexes typical of the late Middle Paleolithic or late Middle Stone Age from these regions. This period would have witnessed the development of local Middle Paleolithic traditions in the Arabian Peninsula, which suggests more complex settlement dynamics and possible population interactions than commonly inferred by the current models of modern human expansion out of Africa.
Asunto(s)
Arqueología , Fósiles , Arabia , Civilización , Humanos , YemenRESUMEN
Neutron irradiation of samples for 40Ar/39Ar dating in a 235U fission reactor requires error-producing corrections for the argon isotopes created from Ca, K, and, to a lesser extent, Cl. The fission spectrum includes neutrons with energies above 2-3 MeV, which are not optimal for the 39K(n,p)39Ar reaction. These higher-energy neutrons are responsible for the largest recoil displacements, which may introduce age artifacts in the case of fine-grained samples. Both interference corrections and recoil displacements would be significantly reduced by irradiation with 2.45 MeV neutrons, which are produced by the deuteron-deuteron (D-D) fusion reaction 2H(d,n)3He. A new generation of D-D reactors should yield sufficiently high neutron fluxes (>10(12) n cm(-2)s(-1)) to be useful for 40Ar/39Ar dating. Modeling indicates that irradiation with D-D neutrons would result in scientific benefits of improved accuracy and broader applicability to fine-grained materials. In addition, radiological safety would be improved, while both maintenance and operational costs would be reduced. Thus, development of high-flux D-D fusion reactors is a worthy goal for 40Ar/39Ar geochronology.