Turmeric Herb Extract-Incorporated Biopolymer Dressings with Beneficial Antibacterial, Antioxidant and Anti-Inflammatory Properties for Wound Healing.

Bacterial infection and inflammation caused by excess oxidative stress are serious challenges in chronic wound healing. The aim of this work is to investigate a wound dressing based on natural- and biowaste-derived biopolymers loaded with an herb extract that demonstrates antibacterial, antioxidant, and anti-inflammatory activities without using additional synthetic drugs. Turmeric extract-loaded carboxymethyl cellulose/silk sericin dressings were produced by esterification crosslinking with citric acid followed by freeze-drying to achieve an interconnected porous structure, sufficient mechanical properties, and hydrogel formation in situ in contact with an aqueous solution. The dressings exhibited inhibitory effects on the growth of bacterial strains that were related to the controlled release of the turmeric extract. The dressings provided antioxidant activity as a result of the radical scavenging effect on DPPH, ABTS, and FRAP radicals. To confirm their anti-inflammatory effects, the inhibition of nitric oxide production in activated RAW 264.7 macrophages was investigated. The findings suggested that the dressings could be a potential candidate for wound healing.

One-Pot and Green Preparation of Phyllanthus emblica Extract/Silver Nanoparticles/Polyvinylpyrrolidone Spray-On Dressing.

A spray-on wound dressing has many benefits, including easy and quick administration to broad and uneven wounds, better interface with the wound site, adhesion without additional dressing, and multiple applications in a portable package. By limiting direct contact with the wound site, such a design can prevent wound damage during treatment. This study revealed a simple, one-pot synthesis of spray-on wound dressing relying on polyvinylpyrrolidone solution incorporating silver nanoparticles as a broad-spectrum antibacterial agent and wound-healing antioxidant Phyllanthus emblica extract. Silver nanoparticles were synthesized in situ using Phyllanthus emblica extract as a biogenic reducing agent. Polyvinylpyrrolidone was employed as a film-forming agent to create an adhesive hydrogel-based dressing matrix to provide moisture and establish a shielding barrier for the wound bed as well as to regulate the release of fruit extract. In vitro tests revealed that the produced dressing film had a controlled release of the fruit extract, high antioxidant activity, and a good antibacterial action against S. aureus, P. aeruginosa, E. coli, and MRSA. Additionally, a biocompatibility study has shown that both human fibroblasts and keratinocytes are unaffected by the dressing film. Based on established findings, the current spray-on solution might be a potential option for antibacterial wound dressing.

Injectable eggshell-derived hydroxyapatite-incorporated fibroin-alginate composite hydrogel for bone tissue engineering.

Tissue engineering is a promising approach to repair and regenerate damaged or lost tissues or organs. In dental aspect, reconstruction of the resorbed alveolar bone after tooth extraction plays an important role in the success of dental substitution, especially in dental implant treatment. The hydroxyapatite (HA)-incorporated fibroin-alginate composite injectable hydrogel was fabricated to be used as scaffold for bone regeneration. HA was synthesized from eggshell biowaste. Fibroin was extracted from Bombyx mori cocoon. The synthesized HA, fibroin and alginate hydrogel were characterized. HA-incorporated fibroin-alginate hydrogel had decreased pore size and porosity compared with pure alginate hydrogel. Thermal analysis showed that hydrogel had a degradation peak of approximately 250 °C. Hydrogel could absorb water, with a swelling ratio of around 300% at 24 h. Hydrogel was degraded as time passed and almost completely degraded at day 7. Its compressive Young's modulus was approximately 0.04 ± 0.02 N/mm2 to 0.10 ± 0.02 N/mm2. Primary cytotoxicity test indicated non-toxic potential of the fabricated hydrogel. Increased ALP activity was observed in MC3T3-E1 cultured in HA-incorporated fibroin-alginate hydrogel. Results suggested the potential use of injectable HA fibroin-alginate hydrogel as dental scaffolding material. Further studies including in vivo examinations are needed prior to its clinical application.

Polylactide-based materials science strategies to improve tissue-material interface without the use of growth factors or other biological molecules.

In a large number of medical devices, a key feature of a biomaterial is the ability to successfully bond to living tissues by means of engineered mechanisms such as the enhancement of biomineralization on a bone tissue engineering scaffold or the mimicking of the natural structure of the extracellular matrix (ECM). This ability is commonly referred to as "bioactivity". Materials sciences started to grow interest in it since the development of bioactive glasses by Larry Hench five decades ago. As the main goal in applications of biomedical devices and tissue scaffolds is to obtain a seamless tissue-material interface, achieving optimal bioactivity is essential for the success of most biomaterial-based tissue replacement and regenerative approaches. Polymers derived from lactic acid are largely adopted in the biomedical field, they are versatile, FDA approved and relatively cost-effective. However, as for many other widespread biomedical polymers, they are hydrophobic and lack the intrinsic ability of positively interacting with surrounding tissues. In the last decades scientists have studied many solutions to exploit the positive characteristics of polylactide-based materials overcoming this bottleneck at the same time. The efforts of this research fruitfully produced many effective tissue engineering technologies based on PLA and related biopolymers. This review aims to give an overview on the latest and most promising strategies to improve the bioactivity of lactic acid-based materials, especially focusing on biomolecule-free bulk approaches such as blending, copolymerization or composite fabrication. Avenues for future research to tackle current needs in the field are identified and discussed.

Adipose- and bone marrow-derived mesenchymal stem cells display different osteogenic differentiation patterns in 3D bioactive glass-based scaffolds.

Mesenchymal stem cells can be isolated from a variety of different sources, each having their own peculiar merits and drawbacks. Although a number of studies have been conducted comparing these stem cells for their osteo-differentiation ability, these are mostly done in culture plastics. We have selected stem cells from either adipose tissue (ADSCs) or bone marrow (BMSCs) and studied their differentiation ability in highly porous three-dimensional (3D) 45S5 Bioglass®-based scaffolds. Equal numbers of cells were seeded onto 5 × 5 × 4 mm3 scaffolds and cultured in vitro, with or without osteo-induction medium. After 2 and 4 weeks, the cell-scaffold constructs were analysed for cell number, cell spreading, viability, alkaline phosphatase activity and osteogenic gene expression. The scaffolds with ADSCs displayed osteo-differentiation even without osteo-induction medium; however, with osteo-induction medium osteogenic differentiation was further increased. In contrast, the scaffolds with BMSCs showed no osteo-differentiation without osteo-induction medium; after application of osteo-induction medium, osteo-differentiation was confirmed, although lower than in scaffolds with ADSCs. In general, stem cells in 3D bioactive glass scaffolds differentiated better than cells in culture plastics with respect to their ALP content and osteogenic gene expression. In summary, 45S5 Bioglass-based scaffolds seeded with ADSCs are well-suited for possible bone tissue-engineering applications. Induction of osteogenic differentiation appears unnecessary prior to implantation in this specific setting. Copyright © 2013 John Wiley & Sons, Ltd.

Stratified Scaffolds for Osteochondral Tissue Engineering.

Stratified scaffolds are promising devices finding application in the field of osteochondral tissue engineering. In this scaffold type, different biomaterials are chosen to fulfill specific features required to mimic the complex osteochondral tissue interface, including cartilage, interlayer tissue, and subchondral bone. Here, the biomaterials and fabrication methods currently used to manufacture stratified multilayered scaffolds as well as cell seeding techniques for their characterization are presented.

Chondrogenesis of human bone marrow mesenchymal stromal cells in highly porous alginate-foams supplemented with chondroitin sulfate.

To overcome the limited intrinsic cartilage repair, autologous chondrocyte or bone-marrow-derived mesenchymal stromal cell (BM-MSC) was implanted into cartilage defects. For this purpose suitable biocompatible scaffolds are needed to provide cell retention, chondrogenesis and initial mechanical stability. The present study should indicate whether a recently developed highly porous alginate (Alg) foam scaffold supplemented with chondroitin sulfate (CS) allows the attachment, survival and chondrogenesis of BM-MSCs and articular chondrocytes. The foams were prepared using a freeze-drying method; some of them were supplemented with CS and subsequently characterized for porosity, biodegradation and mechanical profile. BM-MSCs were cultured for 1-2 weeks on the scaffold either under chondrogenic or maintenance conditions. Cell vitality assays, histology, glycosaminoglycan (sGAG) assay, and type II and I collagen immunolabelings were performed to monitor cell growth and extracellular matrix (ECM) synthesis in the scaffolds. Scaffolds had a high porosity ~93-95% with a mean pore sizes of 237±48 µm (Alg) and 197±61 µm (Alg/CS). Incorporation of CS increased mechanical strength of the foams providing gradually CS release over 7 days. Most of the cells survived in the scaffolds. BM-MSCs and articular chondrocytes formed rounded clusters within the scaffold pores. The BM-MSCs, irrespective of whether cultured under non/chondrogenic conditions and chondrocytes produced an ECM containing sGAGs, and types II and I collagen. Total collagen and sGAG contents were higher in differentiated BM-MSC cultures supplemented with CS than in CS-free foams after 14 days. The cell cluster formation induced by the scaffolds might stimulate chondrogenesis via initial intense cell-cell contacts.

Mechanical properties and drug release behavior of PCL/zein coated 45S5 bioactive glass scaffolds for bone tissue engineering application.

This article presents data related to the research article entitled "The effect of coating type on mechanical properties and controlled drug release of PCL/zein coated 45S5 bioactive glass scaffolds for bone tissue engineering" [1]. We provide data on mechanical properties, in vitro bioactivity and drug release of bioactive glass (BG) scaffolds coated by poly (ε-caprolactone) (PCL) and zein used as a controlled release device for tetracycline hydrochloride (TCH). By coating the BG scaffolds with PCL or PCL/zein blend the mechanical properties of the scaffolds were substantially improved, i.e., the compressive strength increased from 0.004±0.001 MPa (uncoated BG scaffolds) to 0.15±0.02 MPa (PCL/zein coated BG scaffolds). A dense bone-like apatite layer formed on the surface of PCL/zein coated scaffolds immersed for 14 days in simulated body fluid (SBF). The data describe control of drug release and in vitro degradation behavior of coating by engineering the concentration of zein. Thus, the developed scaffolds exhibit attractive properties for application in bone tissue engineering research.

Functionalized nanofibers as drug-delivery systems for osteochondral regeneration.

A wide range of drug-delivery systems are currently attracting the attention of researchers. Nanofibers are very interesting carriers for drug delivery. This is because nanofibers are versatile, flexible, nanobiomimetic and similar to extracellular matrix components, possible to be functionalized both on their surface as well as in their core, and also because they can be produced easily and cost effectively. There have been increasing attempts to use nanofibers in the construction of a range of tissues, including cartilage and bone. Nanofibers have also been favorably engaged as a drug-delivery system in cell-free scaffolds. This short overview is devoted to current applications and to further perspectives of nanofibers as drug-delivery devices in the field of cartilage and bone regeneration, and also in osteochondral reconstruction.

Bioglass®/chitosan-polycaprolactone bilayered composite scaffolds intended for osteochondral tissue engineering.

Polymer-coated 45S5 Bioglass(®) (BG)/chitosan-polycaprolactone (BG/CS-PCL) bilayered composite scaffolds were prepared via foam replication and freeze-drying techniques for application in osteochondral tissue engineering. The CS-PCL coated and uncoated BG scaffolds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The mechanical properties of the coated scaffolds were significantly improved in comparison to uncoated scaffolds. The bioactivity and biodegradation behavior of scaffolds were studied in simulated body fluid (SBF) for up to 28 days. The interface between the BG scaffold and the polymer coating layer was observed by SEM and a suitable interpenetration of the polymer into the scaffold struts was found. The effects of coated and uncoated BG scaffolds on MG-63 osteoblast-like cells were evaluated by cell viability, adhesion and proliferation.

Development of bioactive glass based scaffolds for controlled antibiotic release in bone tissue engineering via biodegradable polymer layered coating.

Highly porous 45S5 Bioglass(®)-based scaffolds coated with two polymer layers were fabricated to serve as a multifunctional device with controlled drug release capability for bone regeneration applications. An interior poly(d,l-lactide)/poly(ethylene glycol)-(polypropylene glycol)-poly(ethylene glycol) triblock copolymer (Pluronic P123) coating improved the mechanical stability of Bioglass-based scaffolds, while an exterior natural polymer (alginate or gelatin) coating served as an antibiotic drug carrier. The results showed improved mechanical properties of Bioglass-based scaffolds by the bilayer polymer coating. In addition, hydrochloride tetracycline loaded in either alginate or gelatin coatings was released rapidly at the initial stage (∼1 h), while the released rate subsequently decreased and was sustained for 14 days in phosphate buffered saline. Therefore, these layered polymer coated scaffolds exhibit attractive characteristics in terms of improved mechanical properties and controlled drug release, simultaneously with the added advantage that the drug release rate is decoupled from the intrinsic scaffold Bioglass degradation mechanism. The layered polymer coated scaffolds are of interest for drug-delivery enhanced bone regeneration applications.

45S5-Bioglass(®)-based 3D-scaffolds seeded with human adipose tissue-derived stem cells induce in vivo vascularization in the CAM angiogenesis assay.

Poor vascularization is the key limitation for long-term acceptance of large three-dimensional (3D) tissue engineering constructs in regenerative medicine. 45S5 Bioglass(®) was investigated given its potential for applications in bone engineering. Since native Bioglass(®) shows insufficient angiogenic properties, we used a collagen coating, to seed human adipose tissue-derived stem cells (hASC) confluently onto 3D 45S5 Bioglass(®)-based scaffolds. To investigate vascularization by semiquantitative analyses, these biofunctionalized scaffolds were then subjected to in vitro human umbilical vein endothelial cells formation assays, and were also investigated in the chorioallantoic membrane (CAM) angiogenesis model, an in vivo angiogenesis assay, which uses the CAM of the hen's egg. In their native, nonbiofunctionalized state, neither Bioglass(®)-based nor biologically inert fibrous polypropylene control scaffolds showed angiogenic properties. However, significant vascularization was induced by hASC-seeded scaffolds (Bioglass(®) and polypropylene) in the CAM angiogenesis assay. Biofunctionalized scaffolds also showed enhanced tube lengths, compared to unmodified scaffolds or constructs seeded with fibroblasts. In case of biologically inert hernia meshes, the quantification of vascular endothelial growth factor secretion as the key angiogenic stimulus strongly correlated to the tube lengths and vessel numbers in all models. This correlation proved the CAM angiogenesis assay to be a suitable semiquantitative tool to characterize angiogenic effects of larger 3D implants. In addition, our results suggest that combinations of suitable scaffold materials, such as 45S5 Bioglass(®), with hASC could be a promising approach for future tissue engineering applications.

Osteochondral tissue engineering: scaffolds, stem cells and applications.

Osteochondral tissue engineering has shown an increasing development to provide suitable strategies for the regeneration of damaged cartilage and underlying subchondral bone tissue. For reasons of the limitation in the capacity of articular cartilage to self-repair, it is essential to develop approaches based on suitable scaffolds made of appropriate engineered biomaterials. The combination of biodegradable polymers and bioactive ceramics in a variety of composite structures is promising in this area, whereby the fabrication methods, associated cells and signalling factors determine the success of the strategies. The objective of this review is to present and discuss approaches being proposed in osteochondral tissue engineering, which are focused on the application of various materials forming bilayered composite scaffolds, including polymers and ceramics, discussing the variety of scaffold designs and fabrication methods being developed. Additionally, cell sources and biological protein incorporation methods are discussed, addressing their interaction with scaffolds and highlighting the potential for creating a new generation of bilayered composite scaffolds that can mimic the native interfacial tissue properties, and are able to adapt to the biological environment.