Air-Stable Perylene Diimide Trimer Material for N-Type Organic Electrochemical Transistors.

A new method is reported to make air-stable n-type organic mixed ionic-electronic conductor (OMIEC) films for organic electrochemical transistors (OECTs) using a solution-processable small molecule helical perylene diimide trimer, hPDI[3]-C11. Alkyl side chains are attached to the conjugated core for processability and film making, which are then cleaved via thermal annealing. After the sidechains are removed, the hPDI[3] film becomes less hydrophobic, more ordered, and has a deeper lowest unoccupied molecular orbital (LUMO). These features provide improved ionic transport, greater electronic mobility, and increased stability in air and in aqueous solution. Subsequently, hPDI[3]-H is used as the active material in OECTs and a device with a transconductance of 44 mS, volumetric capacitance of ≈250 F cm-3, µC* value of 1 F cm-1 V-1 s-1, and excellent stability (> 5 weeks) is demonstrated. As proof of their practical applications, a hPDI[3]-H-based OECTs as a glucose sensor and electrochemical inverter is utilized. The approach of side chain removal after film formation charts a path to a wide range of molecular semiconductors to be used as stable, mixed ionic-electronic conductors.

Spin-Polarized Charge Separation at Two-Dimensional Semiconductor/Molecule Interfaces.

Spin-polarized electrons can improve the efficiency and selectivity of photo- and electro-catalytic reactions, as demonstrated in the past with magnetic or magnetized catalysts. Here, we present a scheme in which spin-polarized charge separation occurs at the interfaces of nonmagnetic semiconductors and molecular films in the absence of a magnetic field. We take advantage of the spin-valley-locked band structure and valley-dependent optical selection rule in group VI transition metal dichalcogenide (TMDC) monolayers to generate spin-polarized electron-hole pairs. Photoinduced electron transfer from WS2 to fullerene (C60) and hole transfer from MoSe2 to phthalocyanine (H2Pc) are found to result in spin polarization lifetimes that are 1 order of magnitude longer than those in the TMDC monolayers alone. Our findings connect valleytronic properties of TMDC monolayers to spin-polarized interfacial charge transfer and suggest a viable route toward spin-selective photocatalysis.

Effective Gating in Single-Molecule Junctions through Fano Resonances.

The successful incorporation of molecules as active circuit elements relies on the ability to tune their electronic properties through chemical design. A synthetic strategy that has been used to manipulate and gate circuit conductance involves attaching a pendant substituent along the molecular conduction pathway. However, such a chemical gate has not yet been shown to significantly modify conductance. Here, we report a novel series of triarylmethylium and triangulenium carbocations gated by different substituents coupled to the delocalized conducting orbitals on the molecular backbone through a Fano resonance. By changing the pendant substituents to modulate the position of the Fano resonance and its coupling to the conducting orbitals, we can regulate the junction conductance by a remarkable factor of 450. This work thus provides a new design principle to enable effective chemical gating of single-molecule devices toward effective molecular transistors.

Electron and Spin Delocalization in [Co6 Se8 (PEt3 )6 ]0/+1 Superatoms.

Molecular clusters can function as nanoscale atoms/superatoms, assembling into superatomic solids, a new class of solid-state materials with designable properties through modifications on superatoms. To explore possibilities on diversifying building blocks, here we thoroughly studied one representative superatom, Co6 Se8 (PEt3 )6 . We probed its structural, electronic, and magnetic properties and revealed its detailed electronic structure as valence electrons delocalize over inorganic [Co6 Se8 ] core while ligands function as an insulated shell. 59 Co SSNMR measurements on the core and 31 P, 13 C on the ligands show that the neutral Co6 Se8 (PEt3 )6 is diamagnetic and symmetric, with all ligands magnetically equivalent. Quantum computations cross-validate NMR results and reveal degenerate delocalized HOMO orbitals, indicating aromaticity. Ligand substitution keeps the inorganic core nearly intact. After losing one electron, the unpaired electron in [Co6 Se8 (PEt3 )6 ]+1 is delocalized, causing paramagnetism and a delocalized electron spin. Notably, this feature of electron/spin delocalization over a large cluster is attractive for special single-electron devices.

Near-Infrared, Organic Chiroptic Switch with High Dissymmetry Factors.

Here we unveil a chiral molecular redox switch derived from PDI-based twistacenes─chPDI[2] that has the remarkable attributes of high-intensity and a broadband chiral response. This material exhibits facile, stable, and reversible multistate chiroptical switching behavior over a broad active wavelength range close to 700 nm, encompassing ultraviolet, visible, and near-infrared regions. Upon reduction, chPDI[2] exhibits a substantial increase in the amplitude of its circular dichroic response, with an outstanding |ΔΔε| > 300 M-1 cm-1 and a high dissymmetry factor of 3 × 10-2 at 960 nm. DFT calculations suggest that the long wavelength CD signal for doubly reduced chPDI[2] originates from excitation of the PDI backbone to the π* orbital of the bridging alkene. Importantly, the dimer's molecular contortion facilitates ionic diffusion, enabling chiral switching in solid state films. The high dissymmetry factors and near-infrared response establish chPDI[2] as a unique chiroptic switch.

Interplay between Local Moment and Itinerant Magnetism in the Layered Metallic Antiferromagnet TaFe1.14Te3.

Two-dimensional antiferromagnets have garnered considerable interest for the next generation of functional spintronics. However, many bulk materials from which two-dimensional antiferromagnets are isolated are limited by their air sensitivity, low ordering temperatures, and insulating transport properties. TaFe1+yTe3 aims to address these challenges with increased air stability, metallic transport, and robust antiferromagnetism. Here, we synthesize TaFe1+yTe3 (y = 0.14), identify its structural, magnetic, and electronic properties, and elucidate the relationships between them. Axial-dependent high-field magnetization measurements on TaFe1.14Te3 reveal saturation magnetic fields ranging between 27 and 30 T with saturation magnetic moments of 2.05-2.12 µB. Magnetotransport measurements confirm that TaFe1.14Te3 is metallic with strong coupling between magnetic order and electronic transport. Angle-resolved photoemission spectroscopy measurements across the magnetic transition uncover a complex interplay between itinerant electrons and local magnetic moments that drives the magnetic transition. We demonstrate the ability to isolate few-layer sheets of TaFe1.14Te3, establishing TaFe1.14Te3 as a potential platform for two-dimensional spintronics.

Radical Single-Molecule Junctions.

Radicals are unique molecular systems for applications in electronic devices due to their open-shell electronic structures. Radicals can function as good electrical conductors and switches in molecular circuits while also holding great promise in the field of molecular spintronics. However, it is both challenging to create stable, persistent radicals and to understand their properties in molecular junctions. The goal of this Perspective is to address this dual challenge by providing design principles for the synthesis of stable radicals relevant to molecular junctions, as well as offering current insight into the electronic properties of radicals in single-molecule devices. By exploring both the chemical and physical properties of established radical systems, we will facilitate increased exploration and development of radical-based molecular systems.

Designing Long and Highly Conducting Molecular Wires with Multiple Nontrivial Topological States.

Molecular one-dimensional topological insulators (1D TIs), described by the Su-Schrieffer-Heeger (SSH) model, are a new class of molecular electronic wires whose low-energy topological edge states endow them with high electrical conductivity. However, when these 1D TIs become long, the high conductance is not sustained because the coupling between the edge states decreases with increasing length. Here, we present a new design where we connect multiple short 1D SSH TI units linearly or in a cycle to create molecular wires with a continuous topological state density. Using a tight-binding method, we show that the linear system gives a length-independent conductance. The cyclic systems show an interesting odd-even effect, with unit transmission in the topological limit, but zero transmission in the trivial limit. Furthermore, based on our calculations, we predict that these systems can support resonant transmission with a quantum of conductance. We can further expand these results to phenylene-based linear and cyclic 1D TI systems and confirm the length-dependent conductance in such systems.

Functional Monolayers on a Superatomic Pegboard.

We advance the chemistry of apical chlorine substitution in the 2D superatomic semiconductor Re6Se8Cl2 to build functional and atomically precise monolayers on the surface of the 2D superatomic Re6Se8 substrate. We create a functional monolayer by installing surface (2,2'-bipyridine)-4-sulfide (Sbpy) groups that chelate to catalytically active metal complexes. Through this reaction chemistry, we can create monolayers where we can control the distribution of catalytic sites. As a demonstration, we create highly active electrocatalysts for the oxygen evolution reaction using monolayers of cobalt(acetylacetonate)2bipyridine. We can further produce a series of catalysts by incorporating organic spacers in the functional monolayers. The structure and flexibility of the surface linkers can affect the catalytic performance, possibly by tuning the coupling between the functional monolayer and the superatomic substrate. These studies establish that the Re6Se8 sheet behaves as a chemical pegboard: a surface amenable to geometrically and chemically well-defined modification to yield functional monolayers, in this case catalytically active, that are atomically precise. This is an effective method to generate diverse families of functional nanomaterials.

Fusing perylene diimide with helicenes.

Incorporating perylene diimide (PDI) units into helicene structures has become a useful strategy for giving access to non-planar electron acceptors as well as a method of creating molecules with unique and intriguing chiroptical properties. This minireview describes this fusion of PDIs with helicenes.

Electric fields drive bond homolysis.

Electric fields have been used to control and direct chemical reactions in biochemistry and enzymatic catalysis, yet directly applying external electric fields to activate reactions in bulk solution and to characterize them ex situ remains a challenge. Here we utilize the scanning tunneling microscope-based break-junction technique to investigate the electric field driven homolytic cleavage of the radical initiator 4-(methylthio)benzoic peroxyanhydride at ambient temperatures in bulk solution, without the use of co-initiators or photochemical activators. Through time-dependent ex situ quantification by high performance liquid chromatography using a UV-vis detector, we find that the electric field catalyzes the reaction. Importantly, we demonstrate that the reaction rate in a field increases linearly with the solvent dielectric constant. Using density functional theory calculations, we show that the applied electric field decreases the dissociation energy of the O-O bond and stabilizes the product relative to the reactant due to their different dipole moments.

Coaxially Conductive Organic Wires Through Self-Assembly.

Here, we describe the synthesis of the hexameric macrocyclic aniline (MA[6]), which spontaneously assembles into coaxially conductive organic wires in its oxidized and acidified emeraldine salt (ES) form. Electrical measurements reveal that ES-MA[6] exhibits high electrical conductivity (7.5 × 10-2 S·cm-1) and that this conductivity is acid-base responsive. Single-crystal X-ray crystallography reveals that ES-MA[6] assembles into well-defined trimeric units that then stack into nanotubes with regular channels, providing a potential route to synthetic nanotubes that are leveraged for ion or small molecule transport. Ultraviolet-visible-near-infrared absorbance spectroscopy and electron paramagnetic spectroscopy showcase the interconversion between acidic (conductive) and basic (insulating) forms of these macrocycles and how charge carriers are formed through protonation, giving rise to the experimentally observed high electrical conductivity.

Topological Radical Pairs Produce Ultrahigh Conductance in Long Molecular Wires.

Molecular one-dimensional topological insulators (1D TIs), which conduct through energetically low-lying topological edge states, can be extremely highly conducting and exhibit a reversed conductance decay, affording them great potential as building blocks for nanoelectronic devices. However, these properties can only be observed at the short length limit. To extend the length at which these anomalous effects can be observed, we design topological oligo[n]emeraldine wires using short 1D TIs as building blocks. As the wire length increases, the number of topological states increases, enabling an increased electronic transmission along the wire; specifically, we show that we can drive over a microampere current through a single ∼5 nm molecular wire, appreciably more than what has been observed in other long wires reported to date. Calculations and experiments show that the longest oligo[7]emeraldine with doped topological states has over 106 enhancements in the transmission compared to its pristine form. The discovery of these highly conductive, long organic wires helps overcome a fundamental hurdle to implementing molecules in complex, nanoscale circuitry: their structures become too insulating at lengths that are useful in designing nanoscale circuits.

A few-layer covalent network of fullerenes.

The two natural allotropes of carbon, diamond and graphite, are extended networks of sp3-hybridized and sp2-hybridized atoms, respectively1. By mixing different hybridizations and geometries of carbon, one could conceptually construct countless synthetic allotropes. Here we introduce graphullerene, a two-dimensional crystalline polymer of C60 that bridges the gulf between molecular and extended carbon materials. Its constituent fullerene subunits arrange hexagonally in a covalently interconnected molecular sheet. We report charge-neutral, purely carbon-based macroscopic crystals that are large enough to be mechanically exfoliated to produce molecularly thin flakes with clean interfaces-a critical requirement for the creation of heterostructures and optoelectronic devices2. The synthesis entails growing single crystals of layered polymeric (Mg4C60)∞ by chemical vapour transport and subsequently removing the magnesium with dilute acid. We explore the thermal conductivity of this material and find it to be much higher than that of molecular C60, which is a consequence of the in-plane covalent bonding. Furthermore, imaging few-layer graphullerene flakes using transmission electron microscopy and near-field nano-photoluminescence spectroscopy reveals the existence of moiré-like superlattices3. More broadly, the synthesis of extended carbon structures by polymerization of molecular precursors charts a clear path to the systematic design of materials for the construction of two-dimensional heterostructures with tunable optoelectronic properties.

Comparison of the Cannabinoid and Terpene Profiles in Commercial Cannabis from Natural and Artificial Cultivation.

Interest in cultivating cannabis for medical and recreational purposes is increasing due to a dramatic shift in cannabis legislation worldwide. Therefore, a comprehensive understanding of the composition of secondary metabolites, cannabinoids, and terpenes grown in different environmental conditions is of primary importance for the medical and recreational use of cannabis. We compared the terpene and cannabinoid profiles using gas/liquid chromatography and mass spectrometry for commercial cannabis from genetically identical plants grown indoors using artificial light and artificially grown media or outdoors grown in living soil and natural sunlight. By analyzing the cannabinoids, we found significant variations in the metabolomic profile of cannabis for the different environments. Overall, for both cultivars, there were significantly greater oxidized and degraded cannabinoids in the indoor-grown samples. Moreover, the outdoor-grown samples had significantly more unusual cannabinoids, such as C4- and C6-THCA. There were also significant differences in the terpene profiles between indoor- and outdoor-grown cannabis. The outdoor samples had a greater preponderance of sesquiterpenes including ß-caryophyllene, α-humulene, α-bergamotene, α-guaiene, and germacrene B relative to the indoor samples.

Characterizing the Conformational Free-Energy Landscape of RNA Stem-Loops Using Single-Molecule Field-Effect Transistors.

We have developed and used single-molecule field-effect transistors (smFETs) to characterize the conformational free-energy landscape of RNA stem-loops. Stem-loops are one of the most common RNA structural motifs and serve as building blocks for the formation of complex RNA structures. Given their prevalence and integral role in RNA folding, the kinetics of stem-loop (un)folding has been extensively characterized using both experimental and computational approaches. Interestingly, these studies have reported vastly disparate timescales of (un)folding, which has been interpreted as evidence that (un)folding of even simple stem-loops occurs on a highly rugged conformational energy landscape. Because smFETs do not rely on fluorophore reporters of conformation or mechanical (un)folding forces, they provide a unique approach that has allowed us to directly monitor tens of thousands of (un)folding events of individual stem-loops at a 200 µs time resolution. Our results show that under our experimental conditions, stem-loops (un)fold over a 1-200 ms timescale during which they transition between ensembles of unfolded and folded conformations, the latter of which is composed of at least two sub-populations. The 1-200 ms timescale of (un)folding we observe here indicates that smFETs report on complete (un)folding trajectories in which unfolded conformations of the RNA spend long periods of time wandering the free-energy landscape before sampling one of several misfolded conformations or the natively folded conformation. Our findings highlight the extremely rugged landscape on which even the simplest RNA structural elements fold and demonstrate that smFETs are a unique and powerful approach for characterizing the conformational free-energy of RNA.

Expanded [23]-Helicene with Exceptional Chiroptical Properties via an Iterative Ring-Fusion Strategy.

Expanded helicenes are an emerging class of helical nanocarbons composed of alternating linear and angularly fused rings, which give rise to an internal cavity and a large diameter. The latter is expected to impart exceptional chiroptical properties, but low enantiomerization free energy barriers (ΔG‡e) have largely precluded experimental interrogation of this prediction. Here, we report the syntheses of expanded helicenes containing 15, 19, and 23 rings on the inner helical circuit, using two iterations of an Ir-catalyzed, site-selective [2 + 2 + 2] reaction. This series of compounds displays a linear relationship between the number of rings and ΔG‡e. The expanded [23]-helicene, which is 7 rings longer than any known single carbohelicene and among the longest known all-carbon ladder oligomers, exhibits a ΔG‡e that is high enough (29.2 ± 0.1 kcal/mol at 100 °C in o-DCB) to halt enantiomerization at ambient temperature. This enabled the isolation of enantiopure samples displaying circular dichroism dissymmetry factors of ±0.056 at 428 nm, which are ≥1.7× larger than values for previously reported classical and expanded helicenes. Computational investigations suggest that this improved performance is the result of both the increased diameter and length of the [23]-helicene, providing guiding design principles for high dissymmetry molecular materials.

Interfacial electric fields catalyze Ullmann coupling reactions on gold surfaces.

The electric fields created at solid-liquid interfaces are important in heterogeneous catalysis. Here we describe the Ullmann coupling of aryl iodides on rough gold surfaces, which we monitor in situ using the scanning tunneling microscope-based break junction (STM-BJ) and ex situ using mass spectrometry and fluorescence spectroscopy. We find that this Ullmann coupling reaction occurs only on rough gold surfaces in polar solvents, the latter of which implicates interfacial electric fields. These experimental observations are supported by density functional theory calculations that elucidate the roles of surface roughness and local electric fields on the reaction. More broadly, this touchstone study offers a facile method to access and probe in real time an increasingly prominent yet incompletely understood mode of catalysis.

Inducing Singlet Fission in Perylene Thin Films by Molecular Contortion.

Singlet fission occurs only in a limited number of molecules, and expanding the molecular toolbox is necessary for progress. Here, we apply the molecular contortion strategy to tune singlet and triplet energies and observe changes in the excited-state dynamics that are consistent with singlet fission playing a role in thin films of contorted perylene. Perylene is a prototypical molecular chromophore, which does not undergo singlet fission in its planar form from its S1 state. The tuning of the energetics that control singlet fission through molecular contortion can be applied to a large repertoire of established molecular chromophores.

Electric-field-induced coupling of aryl iodides with a nickel(0) complex.

The formation of carbon-carbon bonds with transition metal reagents serves as a cornerstone of organic synthesis. Here, we show that the reactivity of an otherwise kinetically inert transition metal complex can be induced by an external electric field to affect a coupling reaction. These results highlight the importance of electric field effects in reaction chemistry and offers a new strategy to modulate organometallic reactivity.