Supramolecular complexation of C60 with branched polyethylene.

Fullerene C60 is a ubiquitous material for application in organic electronics and nanotechnology, due to its desirable optoelectronic properties including good molecular orbital alignment with electron-rich donor materials, as well as high and isotropic charge carrier mobility. However, C60 possesses two limitations that hinder its integration into large-scale devices: (1) poor solubility in common organic solvents leading to expensive device processing, and (2) poor optical absorbance in the visible portion of the spectrum. Covalent functionalization has long been the standard for introducing structural tunability into molecular design, but non-covalent interactions have emerged as an alternative strategy to tailor C60-based materials, offering a versatile and tuneable alternative to novel functional materials and applications. In this work, we report a straightforward non-covalent functionalization of C60 with a branched polyethylene (BPE), which occurs spontaneously in dilute chloroform solution under ambient conditions. A detailed characterization strategy, based on UV-vis spectroscopy and size-exclusion chromatography was performed to verify and investigate the structure of the C60+BPE complex. Among others, our work reveals that the supramolecular complex has an order of magnitude higher molecular weight than its C60 and BPE constituents and points towards oxidation as the driving force behind complexation. The C60+BPE complex also possesses significantly broadened optical absorbance compared to unfunctionalized C60, extending further into the visible portion of the spectrum. This non-covalent approach presents an inexpensive route to address the shortcomings of C60 for electronic applications, situating the C60+BPE complex as a promising candidate for further investigation in organic electronic devices.

Facile Blending Strategy for Boosting the Conjugated Polymer Semiconductor Transistor's Mobility.

The optimization of field-effect mobility in polymer field-effect transistors (FETs) is a critical parameter for advancing organic electronics. Today, many challenges still persist in understanding the roles of the design and processing of semiconducting polymers toward electronic performance. To address this, a facile approach to solution processing using blends of PDPP-TVT and PTPA-3CN is developed, resulting in a 3.5-fold increase in hole mobility and retained stability in electrical performance over 3 cm2 V-1 s-1 after 20 weeks. The amorphous D-A conjugated structure and strong intramolecular polarity of PTPA-3CN are identified as major contributors to the observed improvements in mobility. Additionally, the composite analysis by X-ray photoelectron spectroscopy (XPS) and the flash differential scanning calorimetry (DSC) technique showed a uniform distribution and was well mixed in binary polymer systems. This mobility enhancement technique has also been successfully applied to other polymer semiconductor systems, offering a new design strategy for blending-type organic transistor systems. This blending methodology holds great promise for the practical applications of OFETs.

Graphene Inks Printed by Aerosol Jet for Sensing Applications: The Role of Dispersant on the Inks' Formulation and Performance.

This study presents graphene inks produced through the liquid-phase exfoliation of graphene flakes in water using optimized concentrations of dispersants (gelatin, triton X-100, and tween-20). The study explores and compares the effectiveness of the three different dispersants in creating stable and conductive inks. These inks can be printed onto polyethylene terephthalate (PET) substrates using an aerosol jet printer. The investigation aims to identify the most suitable dispersant to formulate a high-quality graphene ink for potential applications in printed electronics, particularly in developing chemiresistive sensors for IoT applications. Our findings indicate that triton X-100 is the most effective dispersant for formulating graphene ink (GTr), which demonstrated electrical conductivity (4.5 S·cm-1), a high nanofiller concentration of graphene flakes (12.2%) with a size smaller than 200 nm (<200 nm), a low dispersant-to-graphene ratio (5%), good quality as measured by Raman spectroscopy (ID/IG ≈ 0.27), and good wettability (θ ≈ 42°) over PET. The GTr's ecological benefits, combined with its excellent printability and good conductivity, make it an ideal candidate for manufacturing chemiresistive sensors that can be used for Internet of Things (IoT) healthcare and environmental applications.

Ferrocene metallopolymers of intrinsic microporosity (MPIMs).

We show here that non-network metallopolymers can possess intrinsic microporosity stemming from contortion introduced by metallocene building blocks. Metallopolymers constructed from ferrocenyl building blocks linked by phenyldiacetylene bridges are synthesized and possess BET surface areas up to 400 m2 g-1. As solubility imparted by pendant groups reduces porosity, copolymerization is used to simultaneously improve both accessible surface area and solubility. Spectroscopic analysis provides evidence that mixed valency between neighboring ferrocenyl units is supported in these polymers.

Enhancing the Solubility of Semiconducting Polymers in Eco-Friendly Solvents with Carbohydrate-Containing Side Chains.

Semiconducting polymers are at the forefront of next-generation organic electronics due to their robust mechanical and optoelectronic properties. However, their extended π-conjugation often leads to materials with low solubilities in common organic solvents, thus requiring processing in high-boiling-point and toxic halogenated solvents to generate thin-film devices. To address this environmental concern, a natural product-inspired side-chain engineering approach was used to incorporate galactose-containing moieties into semiconducting polymers toward improved processability in greener solvents. Novel isoindigo-based polymers with different ratios of galactose-containing side chains were synthesized to improve the solubilities of the organic semiconductors in alcohol-based solvents. The addition of carbohydrate-containing side chains to π-conjugated polymers was found to considerably impact the intermolecular aggregation of the materials and their microstructures in the solid state as confirmed by atomic force microscopy and grazing-incidence wide-angle X-ray scattering. The charge transport characteristics of the new semiconductors were evaluated by the fabrication of organic field-effect transistors prepared from both toxic halogenated and greener alcohol-based solvents. Importantly, the incorporation of carbohydrate-containing side chains was shown to have very little detrimental impact on the electronic properties of the polymer when processed from green solvents.

Topochemical Polymerization of a Nematic Tetraazaporphyrin Derivative To Generate Soluble Polydiacetylene Nanowires.

Polydiacetylenes are well-established one-dimensional organic semiconductors that have been generated by photochemical and thermal polymerizations of diacetylenes in single crystals, gel phases, thin films, and membranes. Their formation in mesophases, such as liquid crystals, has been surprisingly little studied although higher-ordered mesophases should support the topochemical polymerization of diacetylenes (1,3-butadiyne groups) and may give access to large domains of uniformly aligned materials. The polymerization of diacetylenes in a mesophase may also increase the stability of the self-assembled supramolecular structure. Here, the dye and discotic mesogen tetraazaporphyrin was decorated with eight diacetylene-containing alkyl chains to probe its mesomorphism and conversion into multifunctional polydiacetylene materials. While the incorporation of diacetylene groups supports columnar mesomorphism, successful photopolymerization required the presence of directing amide groups that suppressed columnar in favor of nematic mesomorphism. Still, the polymerization of the nematic mesophase generated a soluble nematic polydiacetylene of significantly higher molecular weight (Mn = 77 kDa or 25 monomer units by gel permeation chromatography) than what has been obtained in gel phases of related compounds. The formation of polydiacetylene was confirmed by Raman spectroscopy, and its nematic structure was verified by UV-vis spectroscopy, polarized optical microscopy, and X-ray diffraction. Both its nematic structure and the incorporation of eight side chains per discotic unit provide the polydiacetylene with sufficient solubility for casting thin films on substrates. Atomic force microscopy studies of films on silicon wafers revealed a grid-like structure of connected nanofibers. This study demonstrates the requirements for the formation of multifunctional mesomorphic polydiacetylene materials from mesomorphic precursors and their advantages. Optimization of the presented molecular design should give access to other mesophases and, consequently, functional polydiacetylene materials with tunable structures and optoelectronic properties.

Covalent Cross-Linking of Diketopyrrolopyrrole-Based Organogels with Polydiacetylenes.

A new strategy toward functional materials with novel properties and well-defined structures has been developed through the topochemical polymerization of diacetylene-containing diketopyrrolopyrrole (DPP) derivatives. In order to enable the efficient photopolymerization and cross-linking of the materials, a rational design of DPP-based derivatives has been performed to incorporate amide moieties, thus enabling the formation of intermolecular hydrogen bonds and the formation of an organogel. The new materials showed good gelation properties in aromatic solvents, resulting in the formation of a dense fibrous network in the gel state. Upon UV irradiation, the supramolecular self-assemblies obtained were shown to be efficiently cross-linked through the conversion of diacetylene into polydiacetylene. A detailed investigation of new resulting materials was performed by a combination of morphological characterization tools, including X-ray diffraction, Raman spectroscopy, and atomic force microscopy. Our results demonstrate that the topochemical polymerization of diacetylene-containing DPP-based compounds is a promising strategy toward new electroactive and well-defined materials, without the use of catalysts or additives, thus creating new opportunities for the preparation and processing of π-conjugated materials.