RESUMEN
Analytes are sampled from both solution phase and gas-phase environments during the ESI process, and thus, the mass spectrum that is measured can reflect both solution and gas-phase conditions. In the gas-phase regime, ion-molecule reactions can influence the types of ions that are observed. Herein, the synergistic effects of a Lewis acid (Mg2+) and background water are shown to lead to protonolysis of two of the B-C bonds of the tetraphenylborate ion in the gas phase, giving rise to different ions at different reaction times in ESI-MS/MS experiments in a linear ion trap mass spectrometer. At short reaction times (1 ms), the expected adduct [Mg(BPh4)]+ is observed. At 10 ms, [(HO)Mg(BPh3)]+ and [(HO)2Mg(BPh2)]+ are observed. At 100 ms, the water adducts [(HO)2Mg(BPh2)(H2O)]+ and [(HO)2Mg(BPh2)(H2O)2]+ appear, and these become the dominant ions at longer reaction times. DFT calculations provide a plausible explanation as to why only [(HO)Mg(BPh3)]+ and [(HO)2Mg(BPh2)]+ but not [(HO)3Mg(BPh)]+ are observed.
RESUMEN
RATIONALE: There are a growing number of examples of protomers formed via electrospray ionization (ESI) that do not fragment under mobile proton conditions, giving rise to distinct tandem mass spectra. To model the N-protomer of 4-aminobenzoic acid, here we study the gas-phase unimolecular and bimolecular chemistry of the 4-(carboxyphenyl)trimethylammonium ion. METHODS: 4-(Carboxyphenyl)trimethylammonium iodide was synthesized, purified via recrystallization and transferred to the gas phase via ESI. 4-(Carboxyphenyl)trimethylammonium ion, 7, was mass selected and subjected to collision-induced dissociation and ion-molecule reactions in a linear ion trap mass spectrometer. RESULTS: The major fragmentation channel for the fixed-charge cation 7 is methyl radical loss, whereas loss of trimethylamine and CO2 represents minor pathways. The free carboxylic acid functional group of 7 is unreactive toward a number of neutral reagents (methanol, acetone, acetonitrile, and N,N'-diisopropylcarbodiimide). 7 reacts very slowly with trimethylborate via addition-elimination, consistent with density functional theory (DFT) calculations that show this reaction is slightly endothermic. The deuterated cation 7(D) undergoes slow D/H exchange with ethanol, and DFT calculations reveal that a flip-flop mechanism operates. CONCLUSIONS: The free carboxylic group of 7 is not very reactive toward neutral reagents in the gas phase.
RESUMEN
Methide transfer reactions play important roles in many areas of chemistry, including the Grignard reaction, in the transmetalation steps of metal-catalyzed cross-coupling reactions, and in the generation of cationic metal polymerization catalysts. Methide affinities (MAs) are the key thermodynamic quantity that underpin such reactions, and yet comprehensive methide affinity scales are poorly developed. Here, B3LYP-D3BJ/def2-TZVP calculations are used to calculate the energy changes (MAs) for cations (MeZ â Z+ + Me-), neutrals (MeY- â Y + Me-), and anions (MeX2- â X- + Me-) derived from permethyl species of all group s and p elements. The MAs range from 2525.8 for the singlet cation F+ to -820.4 kJ/mol for the tetramethylborate anion, Me4B-. The cations show the clearest trends: the MAs in all cases decrease going down the group, while moving across a period, the MAs increase from group 1 to group 2 and then decrease for group 3, remaining about the same or with a modest increase moving to group 4, and then continue to increase across a period to a maximum for the halogens (group 17). The anions and dianions are sensitive to hypervalency; those elements that cannot expand the octet have very unfavorable MAs (e.g., MA of Me4C requires the formation of Me5C- and of Me4B- requires the formation of Me5B2-). To address whether the anion MeY- and dianion MeZ2- are stable, the vertical detachment energies of the anions and dianions were calculated. All of the anions are thermodynamically stable with respect to electron loss, except for Me4N-, while the dianions are all thermodynamically unstable with respect to electron loss. The kinetic stability of the dianions with respect to methide and electron loss was also evaluated for the lowest MAs. The only dianions that might be kinetically stable and observable in the gas phase are Me4Ca2-, Me4Sr2-, and Me4Ba2-. The dianion CF3CaF32- is predicted to be both thermodynamically and kinetically stable in the gas phase.
RESUMEN
Multistage mass spectrometry experiments, isotope labelling and DFT calculations were used to explore whether selective decarbonylation of formic acid could be mediated by molybdate anions [(MoO3)x(OH)]- (x = 1 and 2) via a formal catalytic cycle involving two steps. In step 1, both molybdate anions undergo gas-phase ion-molecule reactions (IMR) with formic acid to produce the coordinated formates [(MoO3)x(O2CH)]- and H2O. In step 2, both coordinated formates [(MoO3)x(O2CH)]- undergo decarbonylation under collision-induced dissociation (CID) conditions to reform the molybdate anions [(MoO3)x(OH)]- (x = 1 and 2), thus closing a formal catalytic cycle. In the case of [MoO3(O2CH)]- an additional decarboxylation channel also occurs to yield [MoO3(H)]-, which is unreactive towards formic acid. The reaction between [Mo18O3(18OH)]- and formic acid gives rise to [Mo18O3(O2CH)]- highlighting that ligand substitution occurs without 18O/16O exchange between the coordinated 18OH ligand and HC16O2H. The reaction between [(MoO3)x(OD)]- (x = 1 and 2) and DCO2H initially produces [(MoO3)x(OH)]- (x = 1 and 2), indicating that D/H exchange occurs. DFT calculations were carried out to investigate the reaction mechanisms and energetics associated with both steps of the formal catalytic cycle and to better understand the competition between decarbonylation and decarboxylation, which is crucial in developing a selective catalyst. The CO and CO2 loss channels from the monomolybdate anion [MoO3(O2CH)]- have similar barrier heights which is in agreement with experimental results where both fragmentation channels are observed. In contrast, the dimolybdate anion is more selective, since the decarbonylation pathway of [(MoO3)2(O2CH)]- is both kinetically and thermodynamically favoured, which agrees with experimental observations where the CO loss channel is solely observed.
RESUMEN
A near thermal two-step catalytic cycle for the selective release of hydrogen from formic acid by mononuclear cuprate anions was revealed using multistage mass spectrometry experiments, deuterium labelling and DFT calculations. In gas-phase ion-molecule reactions, mononuclear copper hydride anions [(L)Cu(H)]- (where L = H-, O2CH-, BH4- and CN-) were found to react with formic acid (HCO2H) to yield [(L)Cu(O2CH)]- and H2. The copper formate anions [(L)Cu(O2CH)]- can decarboxylate via collision-induced dissociation (CID) to reform the copper hydride [(L)Cu(H)]-, thereby closing the two-step catalytic cycle. Analogous labelling experiments with d1-formic acid (DCO2H) reveal that the decarboxylation process also occurs spontaneously. A kinetic study was carried out to provide further insights into the species involved in this reaction. Energetics from density functional theory (DFT) calculations show that the key decarboxylation step can occur without CID, thus in support of experimental observations.
RESUMEN
Gas phase ion-molecule reactions between seleniranium ions, R-c-SeCH2CH2+, and cis-cyclooctene were used to probe electronic and steric effects of substituents on kinetics and branching ratios. The second-order rate coefficients increased in the order p-OMeC6H4 < C6H5 < p-BrC6H4 < p-CF3C6H4 < m-NO2C6H4, giving a Hammett plot with R2 = 0.98 and ρ = +1.66. The two main pathways include direct transfer of the selenium moiety to the incoming alkene (π-ligand exchange) and the less favored ring-opening by attack at an iranium carbon to give a cis-bicyclic selenonium ion as supported by density functional theory (DFT) calculations. Branching ratios of each pathway indicated that electron-withdrawing groups directed more attack at carbon than selenium in agreement with previous solution-phase results. Increased steric bulk on selenium was investigated by changing the R group from a methyl to t-butyl, which not only shut down π-ligand exchange but also significantly reduced the overall reactivity. Finally, the reactivity of the iranium ion derived from Se-methylselenocysteine was investigated and shown to react faster and favor π-ligand exchange as the leaving group was changed from ethene to acrylic acid.
RESUMEN
The metastable trilacunary heteropolyoxomolybdate [PMo9O31(py)3]3- - {PMo9}; py = pyridine) and the ditopic pyridyl bearing diarylethene (DAE) (C25H16N2F6S2) self-assemble via a facile ligand replacement methodology to yield the photo-active molecular capsule [(PMo9O31)2(DAE)3]6-. The spatial arrangement and conformation of the three DAE ligands are directed by the surface chemistry of the molecular metal oxide precursor with exclusive ligation of the photo-active antiparallel rotamer to the polyoxometalate (POM) while the integrity of the assembly in solution has been verified by a suite of spectroscopic techniques. Electrocyclisation of the three DAEs occurs sequentially and has been investigated using a combination of steady-state and time-resolved spectroscopies with the discovery of a photochemical cascade whereby rapid photoinduced ring closure is followed by electron transfer from the ring-closed DAE to the POM in the latent donor-acceptor system on subsequent excitation. This interpretation is also supported by computational and detailed spectroelectrochemical analysis. Ring-closing quantum yields were also determined using a custom quantum yield determination setup (QYDS), providing insight into the impact of POM coordination on these processes.
RESUMEN
Copper(I) borohydride ate complexes of the type Cat+[XCu(BH4)]- have been previously postulated as intermediates in the reactions of copper salts with borohydride. Negative ion electrospray ionization of an acetonitrile solution of copper(I) phenylacetylide with a 10-fold excess of sodium borohydride (NaBH4) revealed the formation of a diverse range of mononuclear, dinuclear and trinuclear cuprates with different numbers of BH4-, H- and CN- ligands, the latter likely being formed by abstraction of CN- from the acetonitrile solvent. Collision-induced dissociation was used to examine the fragmentation reactions of the following borohydride containing cuprates: [Cu(H)(BH4)]-, [Cu(BH4)2]-, [Cu(BH4)(CN)]-, [Cu2(H)(BH4)2]-, [Cu2(H)2(BH4)]-, [Cu2(BH4)2(CN)]-, [Cu2(H)(BH4)(CN)]-, [Cu3(H)(BH4)3]-, [Cu3(H)2(BH4)2]-, [Cu3(H)3(BH4)]-, [Cu3(BH4)2(CN)2]-, and [Cu3(H)(BH4)2(CN)]-. In all cases, BH3 loss is observed. For many of the dinuclear and trinuclear complexes cluster fragmentation by loss of CuH was also observed. In the case of [Cu2(H)2(BH4)]- and [Cu3(H)3(BH4)]-, loss of H2 was also observed. DFT calculations were used to explore potential structures of the various borohydride-containing cuprates and to predict the overall reaction energetics for the various fragmentation channels.
RESUMEN
Gas-phase ion-ion reactions between tris-1,10-phenantholine metal dications, [(phen)3M]2+ (where M = Ni and Mg), and the tetraphenylborate anion yield the ion-pairs {[(phen)3M]2+[BPh4]-}+. The ion-pairs undergo transmetalation upon loss of a phen ligand to give the organometallic complexes [(phen)2M(Ph)]+. DFT calculations, used to determine the energy barriers for the transmetalation reactions and the hydrolysis reactions, are entirely consistent with the experimental results.
RESUMEN
High-valent tetraalkylcuprates(iii) and -argentates(iii) are key intermediates of copper- and silver-mediated C-C coupling reactions. Here, we investigate the previously reported contrasting reactivity of [RMiii Me3 ]- complexes (M=Cu, Ag and R=allyl) with energy-dependent collision-induced dissociation experiments, advanced quantum-chemical calculations and kinetic computations. The gas-phase fragmentation experiments confirmed the preferred formation of the [RCuMe]- anion upon collisional activation of the cuprate(iii) species, consistent with a homo-coupling reaction, whereas the silver analogue primarily yielded [AgMe2 ]- , consistent with a cross-coupling reaction. For both complexes, density functional theory calculations identified one mechanism for homo coupling and four different ones for cross coupling. Of these pathways, an unprecedented concerted outer-sphere cross coupling is of particular interest, because it can explain the formation of [AgMe2 ]- from the argentate(iii) species. Remarkably, the different C-C coupling propensities of the two [RMiii Me3 ]- complexes become only apparent when properly accounting for the multi-configurational character of the wave function for the key transition state of [RAgMe3 ]- . Backed by the obtained detailed mechanistic insight for the gas-phase reactions, we propose that the previously observed cross-coupling reaction of the silver complex in solution proceeds via the outer-sphere mechanism.
RESUMEN
Haliranium ions are intermediates often involved in complex cyclisations, where their structure allows for control over stereospecific outcomes. Extending previous studies into their structure and reactivity in the gas phase, this work focuses on the bimolecular reactivity of ethyl bromiranium and iodiranium ions with cyclic alkenes. The products observed via mass spectrometry were broadly attributed to either addition by cyclohexene at the iranium carbon or attack at the heteroatom to undergo associative π-ligand exchange. The model proposed was supported by both kinetic experiments and DFT calculations, where the rate of parent ion consumption proceeded at the collision rate (Br: k2 = 1.25 × 10-9 and I: k2 = 1.28 × 10-9 cm3 molecule-1 s-1) with the subsequent partitioning dependent on the relative stability of the initial intermediates and the relatively large barriers present in the addition pathway. Exploration of the effect of cycloalkene ring strain on the iodiranium ion reactivity was conducted with a series of crossover experiments with 50 : 50 mixtures of either cyclohexene or cis-cyclooctene and styrene, where the outcomes were dependent on the competing ring strain relief gained by reaction with each neutral. The nature of the exchange transition state was determined to be pseudocoarctate following both natural bond orbital (NBO) and anisotropy of the induced current density (ACID) analysis.
RESUMEN
Photo-chemistry provides a non-intuitive but very powerful way to probe kinetically limited, sometimes thermodynamically non-favored reactions and, thus, access highly specific products. However, reactivity in the excited state is difficult to characterize directly, due to short lifetimes and challenges in controlling the reaction medium. Among photo-activatable reagents, rhodamine dyes find widespread uses due to a number of favorable properties including their high absorption coefficient. Their readily adaptable synthesis allows development of tailor-made dyes for specific applications. Remarkably, few studies have directly probed the chemical reactivity of their triplet excited state. Here we present a new conceptual approach to examine the specific chemistry of the triplet excited state. We have developed a pump (488 nm) - probe (600 nm) strategy to examine the gas-phase lifetime and reactivity of the triplet cation of Rhodamine 6G (3Rh6G+) in an ion trap mass spectrometer. The confounding effects of solvent, aggregation and formation of other reactive intermediates is thus avoided allowing fundamental reactivity to be explored. In the presence, in the ion trap, of helium seeded with 1% of nitric oxide (ËNO) (â¼ 60 ion/ËNO collisions per second), the triplet lifetime is shortened from 1.9 s to 0.7 s. Simultaneously, the reaction products [Rh6G-H]Ë+ and [Rh6G-H + NO]+ are observed. Reaction of 3Rh6G+ with ËNO2 yields [Rh6G-H]Ë+, [Rh6G-H + NO2]+ and [Rh6G-2H]+. None of these products are observed for the singlet, 1Rh6G+. DFT calculations suggest a stepwise mechanism only allowed from 3Rh6G+, in which H atom abstraction by ËNOx (x = 1 or 2) yields [Rh6G-H]Ë+ which, then, reacts with another ËNOx molecule. This illustrates the power of light to initiate specific chemical reactions, and the relevance of gas-phase ion-molecule reaction approaches to understand stepwise reaction mechanism from specific excited states.
Asunto(s)
Óxido Nítrico/química , Rodaminas/química , Teoría Funcional de la Densidad , Espectrometría de Masas , Estructura Molecular , Procesos FotoquímicosRESUMEN
Electrospray ionization of phenyl argentates formed by transmetalation reactions between phenyl lithium and silver cyanide provides access to the argentate aggregates, [AgnPhn+1]-, which were individually mass-selected for n = 2-8 in order to generate their gas-phase Ultraviolet Photodissociation (UVPD) "action" spectra over the range 304-399 nm. A strong bathochromic shift in optical spectra was observed with increasing size/n. Theoretical calculations allowed the assignment of the experimental UVPD spectra to specific isomer(s) and provided crucial insights into the transition from the 2D to 3D structure of the metallic component with the increasing size of the complex. The [AgnPhn+1]- aggregates contain neither pronounced metallic cluster properties nor ligated metallic cluster features and are thus not superatom complexes. They therefore represent novel organometallic characteristics built from Ag2Ph subunits.
RESUMEN
The gas-phase unimolecular reactions of the silver(i) complex [Ag(PhBF3)2]-, formed via electrospray ionisation mass spectrometry of solutions containing the phenyltrifluoroborate salt and AgNO3, are examined. Upon collision induced dissociation (CID) three major reaction channels were observed for [Ag(PhBF3)2]-: Ph- group transfer via a transmetalation reaction to yield [PhAg(PhBF3)]-; F- transfer to produce [FAg(PhBF3)]-; and release of PhBF3-. The anionic silver product complexes of these reactions, [LAg(PhBF3)]- (where L = Ph and F), were then mass-selected and subjected to a further stage of CID. [PhAg(PhBF3)]- undergoes a Ph- group transfer via transmetalation to yield [Ph2Ag]- with loss of BF3. [FAg(PhBF3)]- solely fragments via loss of BF4-, a reaction that involves Ph- group transfer from B to Ag in conjunction with F- transfer from Ag to B. Density functional theory (DFT) calculations on the various competing pathways reveal that: (i) the overall endothermicities govern the experimentally observed product ion abundances; (ii) the Ph- group and F- transfer reactions proceed via late transition states; and (iii) formation of BF4- from [FAg(PhBF3)]- is a multistep reaction in which Ph- group transfer from B to Ag proceeds first to produce a [FAgPh(BF3)]- complex in which the BF3 moiety is initially weakly bound to the ipso-carbon of the phenyl group and then migrates across the linear [FAgPh]- moiety from C to Ag to F yielding [PhAg(BF4)]-, which can then dissociate via loss of PhAg.
RESUMEN
Carboxylic acids are valuable organic substrates as they are widely available, easy to handle, and exhibit structural and functional variety. While they are used in many standard synthetic protocols, over the past two decades numerous studies have explored new modes of metal-mediated reactivity of carboxylic acids and their derivatives. Mass spectrometry-based studies can provide fundamental mechanistic insights into these new modes of reactivity. Here gas-phase models for the following catalytic transformations of carboxylic acids and their derivatives are reviewed: protodecarboxylation; dehydration; decarbonylation; reaction as coordinated bases in C-H bond activation; remote functionalization and decarboxylative C-C bond coupling. In each case the catalytic problem is defined, insights from gas-phase studies are highlighted, comparisons with condensed-phase systems are made and perspectives are reached. Finally, the potential role for mechanistic studies that integrate both gas- and condensed-phase studies is highlighted by recent studies on the discovery of new catalysts for the selective decomposition of formic acid and the invention of the new extrusion-insertion class of reactions for the synthesis of amides, thioamides, and amidines. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.
Asunto(s)
Ácidos Carboxílicos , Metales , Ácidos Carboxílicos/química , Catálisis , Espectrometría de MasasRESUMEN
Porphyromonas gingivalis and Tannerella forsythia use the type IX secretion system to secrete cargo proteins to the cell surface where they are anchored via glycolipids. In P. gingivalis, the glycolipid is anionic lipopolysaccharide (A-LPS), of partially known structure. Modified cargo proteins were deglycosylated using trifluoromethanesulfonic acid and digested with trypsin or proteinase K. The residual modifications were then extensively analyzed by tandem mass spectrometry. The C terminus of each cargo protein was amide-bonded to a linking sugar whose structure was deduced to be 2-N-seryl, 3-N-acetylglucuronamide in P. gingivalis and 2-N-glycyl, 3-N-acetylmannuronic acid in T. forsythia The structures indicated the involvement of the Wbp pathway to produce 2,3-di-N-acetylglucuronic acid and a WbpS amidotransferase to produce the uronamide form of this sugar in P. gingivalis The wbpS gene was identified as PGN_1234 as its deletion resulted in the inability to produce the uronamide. In addition, the P. gingivalisvimA mutant which lacks A-LPS was successfully complemented by the T. forsythiavimA gene; however, the linking sugar was altered to include glycine rather than serine. After removal of the acetyl group at C-2 by the putative deacetylase, VimE, VimA presumably transfers the amino acid to complete the biosynthesis. The data explain all the enzyme activities required for the biosynthesis of the linking sugar accounting for six A-LPS-specific genes. The linking sugar is therefore the key compound that enables the attachment of cargo proteins in P. gingivalis and T. forsythia We propose to designate this novel linking sugar biosynthetic pathway the Wbp/Vim pathway.IMPORTANCEPorphyromonas gingivalis and Tannerella forsythia, two pathogens associated with severe gum disease, use the type IX secretion system (T9SS) to secrete and attach toxic arrays of virulence factor proteins to their cell surfaces. The proteins are tethered to the outer membrane via glycolipid anchors that have remained unidentified for more than 2 decades. In this study, the first sugar molecules (linking sugars) in these anchors are identified and found to be novel compounds. The novel biosynthetic pathway of these linking sugars is also elucidated. A diverse range of bacteria that do not have the T9SS were found to have the genes for this pathway, suggesting that they may synthesize similar linking sugars for utilization in different systems. Since the cell surface attachment of virulence factors is essential for virulence, these findings reveal new targets for the development of novel therapies.
Asunto(s)
Sistemas de Secreción Bacterianos/metabolismo , Vías Biosintéticas , Porphyromonas gingivalis/metabolismo , Tannerella forsythia/metabolismo , Sistemas de Secreción Bacterianos/genética , Glicosilación , Lipopolisacáridos/análisis , Lipopolisacáridos/química , Espectrometría de Masas , Porphyromonas gingivalis/genética , Transporte de Proteínas , Azúcares/química , Tannerella forsythia/genéticaRESUMEN
Electrospray ionization-mass spectrometry (ESI-MS) of mixtures of AgBF4 or AgNO3 with the capping ligand bis(diphenylarsino)methane ((Ph2 As)2 CH2 = dpam) in a solution of acetonitrile revealed the formation of the following cations: [Ag(CH3 CN)(dpam)]+ , [Ag(dpam)2 ]+ , [Ag2 (Cl)(dpam)2 ]+ , and [Ag3 (Cl)2 (dpam)3 ]+ . Addition of NaBH4 to these solutions results in the formation of the cluster cations [Ag2 (BH4 )(dpam)2 ]+ , [Ag2 (BH4 )(dpam)3 ]+ , [Ag3 (H)(BH4 )(dpam)3 ]+ , [Ag3 (BH4 )2 (dpam)3 ]+ , [Ag3 (H)(Cl)(dpam)3 ]+ , and [Ag3 (I)(BH4 )(dpam)3 ]+ , as established by ESI-MS. Use of NaBD4 confirmed that borohydride is the source of the hydride in these clusters. An Orbitrap Fusion LUMOS mass spectrometer was used to explore the gas-phase unimolecular chemistry of selected clusters via multistage mass spectrometry (MSn ) experiments employing low-energy collision-induced dissociation (CID) and high-energy collision-induced dissociation (HCD) experiments. The borohydride containing clusters fragment via two competing pathways: (i) ligand loss and (ii) B-H bond activation involving BH3 loss. Density functional theory (DFT) calculations were used to calculate the energetics of the optimized structures for all precursor ions, fragment ions, and neutrals and to estimate the reaction endothermicities. Generally, there is reasonable agreement between the most abundant product ion formed and the predicted endothermicity of the associated reaction channel. The DFT calculations predicted that the novel dimer [Ag2 (BH4 )(dpam)2 ]+ has a paddlewheel structure in which the dpam and BH4 - ligands bridge both silver centers.
RESUMEN
The gas-phase extrusion-insertion reactions of the copper complex [bathophenanthroline (Bphen)CuI (O2 CC6 H5 )]2- , generated via electrospray ionization, was studied in a linear ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reaction (IMR) events. Multistage mass spectrometry (MSn ) experiments and density functional theory (DFT) demonstrated that extrusion of carbon dioxide from [(Bphen)Cu(O2 CC6 H5 )]2- (CID) gives the organometallic intermediate [(Bphen)Cu(C6 H5 )]2- , which subsequently reacts with carbon disulfide (IMR) via insertion to yield [(Bphen)Cu (SC(S)C6 H5 )]2- . The fragmentation of the product ion resulted in the formation of [Bphen]2- , [(Bphen)Cu]- and C6 H5 CS2 - under CID conditions. The formation of the latter two charge separation products thus provides evidence of C-C bond formation in the IMR step. Although analogous studies with isocyanate, which is isoelectronic with CS2 , showed a poor reactivity in the gas phase, the mechanistic understanding obtained from these model studies encourages future development of a solution phase protocol for the synthesis of amides from carboxylic acids and isocyanates mediated by copper(I) complexes.
RESUMEN
The Ru(II)-catalyzed amidation of 2-arylpyridines with aryl isocyanates via C-H bond activation is less efficient than described previously, due to the formation of a series of side products, which were readily identified using direct infusion electrospray mass spectrometry and high-performance liquid chromatography-mass spectrometry.