Determination of the Concentration of Ultrafine Aerosol Using an Ionization Sensor.

As public awareness of the threats related to ultrafine aerosols increases, there is a growing need for inexpensive, real-time exposure assessment devices. In this work, the well-established technology used in the smoke detector with a radioactive source was tested in laboratory conditions to check its suitability for determining the number concentration of the ultrafine aerosol. It has been shown that the sensor output changes linearly with the change of diesel soot concentration in the range up to 8.3 × 105 particles cm-3. The sensor has also been shown to be able to detect rapid changes in aerosol concentration. Empirical equations describing the influence of air velocity, temperature, relative humidity, and pressure on the sensor output were determined. The collected results confirm that the ionization sensor can be used to assess ultrafine aerosol exposure, although additional engineering work is required to increase the resolution of the output signal measurement and to compensate for the effects of weather conditions. The presented method can be used for concentration monitoring and risk assessment in environmental engineering, materials engineering, cosmetics industry, textiles, sports, chemical, mining, energy, etc.

Binary bioactive glass composite scaffolds for bone tissue engineering-Structure and mechanical properties in micro and nano scale. A preliminary study.

Composite scaffolds of bioactive glass (SiO2-CaO) and bioresorbable polyesters: poly-l-lactic acid (PLLA) and polycaprolactone (PCL) were produced by polymer coating of porous foams. Their structure and mechanical properties were investigated in micro and nanoscale, by the means of scanning electron microscopy, PeakForce Quantitative Nanomechanical Property Mapping (PF-QNM) atomic force microscopy, micro-computed tomography and contact angle measurements. This is one of the first studies in which the nanomechanical properties (elastic modulus, adhesion) were measured and mapped simultaneously with topography imaging (PF-QNM AFM) for bioactive glass and bioactive glass - polymer coated scaffolds. Our findings show that polymer coated scaffolds had higher average roughness and lower stiffness in comparison to pure bioactive glass scaffolds. Such coating-dependent scaffold properties may promote different cells-scaffold interaction.

Fabrication, multi-scale characterization and in-vitro evaluation of porous hybrid bioactive glass polymer-coated scaffolds for bone tissue engineering.

Bioactive glass-based scaffolds are commonly used in bone tissue engineering due to their biocompatibility, mechanical strength and adequate porous structure. However, their hydrophobicity and brittleness limits their practical application. In this study, to improve nanomechanical properties of such scaffolds, pure bioactive hybrid glass and two bioactive hybrid glass-polymer coated composites were fabricated. A complementary micro and nanoscale characterization techniques (SEM, AFM, µCT, FTIR, compressive test, goniometer) were implemented for detailed description of architecture and physicochemical properties of hybrid bioactive glass-based scaffolds with emphasis on nano-mechanics. The final step was in-vitro evaluation of three dimensional macroporous structures. Our findings show that after polymer addition, architecture, topography and surface properties of the scaffolds were changed and promoted favoured behaviour of the cells.

Characterization and influence of hydroxyapatite nanopowders on living cells.

Nanomaterials, such as hydroxyapatite nanoparticles show a great promise for medical applications due to their unique properties at the nanoscale. However, there are concerns about the safety of using these materials in biological environments. Despite a great number of published studies of nanoobjects and their aggregates or agglomerates, the impact of their physicochemical properties (such as particle size, surface area, purity, details of structure and degree of agglomeration) on living cells is not yet fully understood. Significant differences in these properties, resulting from different manufacturing methods, are yet another problem to be taken into consideration. The aim of this work was to investigate the correlation between the properties of nanoscale hydroxyapatite from different synthesis methods and biological activity represented by the viability of four cell lines: A549, CHO, BEAS-2B and J774.1 to assess the influence of the nanoparticles on immune, reproductive and respiratory systems.

Scanning electron microscopy image representativeness: morphological data on nanoparticles.

A sample of a nanomaterial contains a distribution of nanoparticles of various shapes and/or sizes. A scanning electron microscopy image of such a sample often captures only a fragment of the morphological variety present in the sample. In order to quantitatively analyse the sample using scanning electron microscope digital images, and, in particular, to derive numerical representations of the sample morphology, image content has to be assessed. In this work, we present a framework for extracting morphological information contained in scanning electron microscopy images using computer vision algorithms, and for converting them into numerical particle descriptors. We explore the concept of image representativeness and provide a set of protocols for selecting optimal scanning electron microscopy images as well as determining the smallest representative image set for each of the morphological features. We demonstrate the practical aspects of our methodology by investigating tricalcium phosphate, Ca3 (PO4 )2 , and calcium hydroxyphosphate, Ca5 (PO4 )3 (OH), both naturally occurring minerals with a wide range of biomedical applications.