New Functional Bionanocomposites by Combining Hybrid Host-Guest Systems with a Fully Biobased Poly(lactic acid)/Poly(butylene succinate-co-adipate) (PLA/PBSA) Binary Blend.

In this study, we have developed innovative polymer nanocomposites by integrating magnesium-aluminum layered double hydroxide (LDH)-based nanocarriers modified with functional molecules into a fully biobased poly(lactic acid)/poly(butylene succinate-co-adipate) (PLA/PBSA) matrix. These LDH-based hybrid host-guest systems contain bioactive compounds like rosmarinic acid, ferulic acid, and glycyrrhetinic acid, known for their antioxidant, antimicrobial, and anti-inflammatory properties. The bioactive molecules can be gradually released from the nanocarriers over time, allowing for sustained and controlled delivery in various applications, such as active packaging or cosmetics. The morphological analysis of the polymer composites, prepared using a discontinuous mechanical mixer, revealed the presence of macroaggregates and nano-lamellae at the polymer interface. This resulted in an enhanced water vapor permeability compared to the original blend. Furthermore, the migration kinetics of active molecules from the thin films confirmed a controlled release mechanism based on their immobilization within the lamellar system. Scaling-up experiments evaluated the materials' morphology and mechanical and thermal properties. Remarkably, stretching deformation and a higher shear rate during the mixing process enhanced the dispersion and distribution of the nanocarriers, as confirmed by the favorable mechanical properties of the materials.

Oxidation of Ethanol to Acetic Acid by Supported PtCu Nanoparticles Stabilized by a Diamine Ligand.

Diamine-capped PtCu nanoparticles have been synthesized by the simultaneous reduction of the corresponding bis-imine metal complexes with hydrogen and supported onto a high-surface-area carbon. The obtained heterogeneous catalyst was tested in thermally conducted aerobic oxidation of ethanol to acetic acid in water as well as in the electrochemical oxidation of ethanol. Both types of catalyses mediated by the PtCu alloy confirmed a notable increase in catalytic activity compared to the pure Pt- and Cu-based counterparts due to a clear bimetallic effect.

Rosmarinic and Glycyrrhetinic Acid-Modified Layered Double Hydroxides as Functional Additives for Poly(Lactic Acid)/Poly(Butylene Succinate) Blends.

Immobilizing natural antioxidant and biologically active molecules in layered double hydroxides (LDHs) is an excellent method to retain and release these substances in a controlled manner, as well as protect them from thermal and photochemical degradation. Herein, we describe the preparation of host-guest systems based on LDHs and rosmarinic and glycyrrhetinic acids, two molecules obtained from the extraction of herbs and licorice root, respectively, with antioxidant, antimicrobial, and anti-inflammatory properties. Intercalation between the lamellae of the mono-deprotonated anions of rosmarinic and glycyrrhetinic acid (RA and GA), alone or in the presence of an alkyl surfactant, allows for readily dispersible systems in biobased polymer matrices such as poly(lactic acid) (PLA), poly(butylene succinate) (PBS), and a 60/40 wt./wt. PLA/PBS blend. The composites based on the PLA/PBS blend showed better interphase compatibility than the neat blend, correlated with increased adhesion at the interface and a decreased dispersed phase size. In addition, we proved that the active species migrate slowly from thin films of the composite materials in a hydroalcoholic solvent, confirming the optimization of the release process. Finally, both host-guest systems and polymeric composites showed antioxidant capacity and, in the case of the PLA composite containing LDH-RA, excellent inhibitory capacity against E. coli and S. aureus.

Steel slag as low-cost catalyst for artificial photosynthesis to convert CO2 and water into hydrogen and methanol.

Photoreduction of CO2 with sunlight to produce solar fuels, also named artificial photosynthesis, is considered one of the most attractive strategies to face the challenge of reducing greenhouse gases and achieving climate neutrality. Following an approach in line with the principles of the circular economy, the low-cost catalytic system (1) based on an industrial by-product such as steel slag was assessed, which was properly modified with nanostructured palladium on its surface in order to make it capable of promoting the conversion of CO2 into methanol and hydrogen through a two-stage process of photoreduction and thermal conversion having formic acid as the intermediate. Notably, for the first time in the literature steel slag is used as photoreduction catalyst.

Cyanine-Doped Nanofiber Mats for Laser Tissue Bonding.

In spite of an extensive body of academic initiatives and innovative products, the toolkit of wound dressing has always revolved around a few common concepts such as adhesive patches and stitches and their variants. Our work aims at an alternative solution for an immediate restitutio ad integrum of the mechanical functionality in cutaneous repairs. We describe the fabrication and the application of electrospun mats of bioactive nanofibers all made of biocompatible components such as a natural polysaccharide and a cyanine dye for use as laser-activatable plasters, resembling the ultrastructure of human dermis. In particular, we investigate their morphological features and mechanical moduli under conditions of physiological relevance, and we test their use to bind a frequent benchmark of connective tissue as rabbit tendon and a significant case of clinical relevance as human dermis. Altogether, our results point to the feasibility of a new material for wound dressing combining translational potential, strength close to human dermis, extensibility exceeding 15% and state-of-art adhesive properties.

Remarkable stability of a molecular ruthenium complex in PEM water electrolysis.

The dinuclear Ru diazadiene olefin complex, [Ru2(OTf)(µ-H)(Me2dad)(dbcot)2], is an active catalyst for hydrogen evolution in a Polymer Exchange Membrane (PEM) water electrolyser. When supported on high surface area carbon black and at 80 °C, [Ru2(OTf)(µ-H)(Me2dad)(dbcot)2]@C evolves hydrogen at the cathode of a PEM electrolysis cell (400 mA cm-2, 1.9 V). A remarkable turn over frequency (TOF) of 7800 molH2 molcatalyst -1 h-1 is maintained over 7 days of operation. A series of model reactions in homogeneous media and in electrochemical half cells, combined with DFT calculations, are used to rationalize the hydrogen evolution mechanism promoted by [Ru2(OTf)(µ-H)(Me2dad)(dbcot)2].

Interlayer Coordination of Pd-Pd Units in Exfoliated Black Phosphorus.

The chemical functionalization of 2D exfoliated black phosphorus (2D BP) continues to attract great interest, although a satisfactory structural characterization of the functionalized material has seldom been achieved. Herein, we provide the first complete structural characterization of 2D BP functionalized with rare discrete Pd2 units, obtained through a mild decomposition of the organometallic dimeric precursor [Pd(η3-C3H5)Cl]2. A multitechnique approach, including HAADF-STEM, solid-state NMR, XPS, and XAS, was used to study in detail the morphology of the palladated nanosheets (Pd2/BP) and to unravel the coordination of Pd2 units to phosphorus atoms of 2D BP. In particular, XAS, backed up by DFT modeling, revealed the existence of unprecedented interlayer Pd-Pd units, sandwiched between stacked BP layers. The preliminary application of Pd2/BP as a catalyst for the hydrogen evolution reaction (HER) in acidic medium highlighted an activity increase due to the presence of Pd2 units.

Green and scalable synthesis of nanocrystalline kuramite.

The new generation of solar cells aims to overcome many of the issues created by silicon-based devices (e.g., decommissioning, flexibility and high-energy production costs). Due to the scarcity of the resources involved in the process and the need for the reduction of potential pollution, a greener approach to solar cell material production is required. Among others, the solvothermal approach for the synthesis of nanocrystalline Cu-Sn-S (CTS) materials fulfils all of these requirements. The material constraints must be considered, not only for the final product, but for the whole production process. Most works reporting the successful synthesis of CTS have employed surfactants, high pressure or noxious solvents. In this paper, we demonstrate the synthesis of nanocrystalline kuramite by means of a simpler, greener and scalable solvothermal synthesis. We exploited a multianalytical characterization approach (X-ray diffraction, extended X-ray absorption fine structure, field emission scanning electron microscopy, Raman spectroscopy and electronic microprobe analysis (EMPA)) to discriminate kuramite from other closely related polymorphs. Moreover, we confirmed the presence of structural defects due to a relevant antisite population.

Catalytic Phosphite Hydrolysis under Neutral Reaction Conditions.

Cationic phosphametallocene-based platinum(II) aqua complexes were used as efficient precatalysts for the hydrolysis of aromatic and aliphatic tertiary phosphites under neutral reaction conditions at room temperature, leading to the selective cleavage of one P-O bond of the phosphite. NMR labeling experiments combined with stoichiometric model reactions and theoretical density functional theory calculations, performed with the appropriate model compounds, shed light on the operative catalytic cycle, which comprises intramolecular water molecule transfer to the cis-coordinated phosphite molecule.

Photochemical Synthesis of cis,trans,cis-1,2,3,4-Tetrakis(diphenylphosphanyl)buta-1,3-diene and Its Metal Coordination.

The new bis(bidentate) tetraphosphane cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphanyl)buta-1,3-diene (dppbd) (7) was obtained by applying a photochemical synthetic protocol. The key step of the photochemical reaction consisted of an intramolecular [2+2] cycloaddition involving a C-C double and triple bond of the Pt-dimer species of the formula [Pt2Cl4(dppa)(trans-dppen)] (2) {dppa = 1,2-bis(diphenylphosphanyl)acetylene and dppen = 1,2-bis(diphenylphosphanyl)ethene} leading to [Pt2Cl4(dppbd)] (5). The asymmetrically bridged precursor complex 2 was obtained by combinatorial chemistry. Single crystal X-ray structure analyses of 2 and 5 proved that the intramolecular photochemical reaction occurred. Cyanolysis of 5 gave 7, which was oxidized to dppbdO4 (8). Compounds 7, 8, and the PdII dimer complex [Pd2Cl4(dppbd)] (9) were characterized in the solid state by a single-crystal X-ray structure analysis. Interesting photophysial properties emerged from the UV/Vis spectra acquired for 7 and the dimer Os complexes meso-Δ,Λ/Λ,Δ-[Os2(bpy)4(dppbd)](PF6)4 (10) and rac-Δ,Δ/Λ,Λ-[Os2(bpy)4(dppbd)](PF6)4 (11).

New Class of Half-Sandwich Ruthenium(II) Arene Complexes Bearing the Water-Soluble CAP Ligand as an in Vitro Anticancer Agent.

Ruthenium(II) arene complexes of 1,4,7-triaza-9-phosphatricyclo[5.3.2.1]tridecane (CAP) were obtained. Cytotoxicity studies against cancer cell lines reveal higher activity than the corresponding PTA analogues and, in comparison to the effects on noncancerous cells, the complexes are endowed with a reasonable degree of cancer cell selectivity.

Heat treated carbon supported iron(ii)phthalocyanine oxygen reduction catalysts: elucidation of the structure-activity relationship using X-ray absorption spectroscopy.

This paper focuses on studying the influence of the heat treatment on the structure and activity of carbon supported Fe(ii)phthalocyanine (FePc/C) oxygen reduction reaction (ORR) catalysts under alkaline conditions. The FePc macrocycle was deposited onto ketjen black carbon and heated treated for 2 hours under inert atmosphere (Ar) at different temperatures (400, 500, 600, 700, 800, 900 and 1000 °C). The atomic structure of Fe in each sample has been determined by XAS and correlated to the activity and ORR mechanisms determined in electrochemical half cells and in a complete H2/O2 anion exchange membrane fuel cells (AEM-FC). The results show that the samples prepared at 600 and 700 °C have the highest electrochemical catalytic activity for the ORR, consistent with the findings that the FeN4 active sites are thermally stable up to 700 °C, confirmed by both XANES linear combination fittings and EXAFS fittings. Upon annealing at temperatures above 800 °C, the FeN4 structure partially decomposes to small iron nanoparticles. The transition from the FeN4 structure to metallic Fe results in a significant loss in ORR activity and an increase in the production of undesirable HO2- during catalysis.

A straightforward access to ruthenium-coordinated fluorophosphines from phosphorous oxyacids.

The transformation of phosphorous oxyacids into the corresponding fluorophosphines was mediated by [RuCp(PPh3)2Cl] under mild reaction conditions using a soft deoxofluorinating agent. The reaction is selective, proceeds with high yields and can be extended to a wide range of phosphorous oxyacids once coordinated to the ruthenium synthon [RuCp(PPh3)2](+) as their hydroxyphosphine tautomer. Deoxofluorination of phenylphosphinic acid was also mediated by [RuCp(R)(CH3CN)3]PF6, where Cp(R): Cp = C5H5, Cp* = C5Me5, and [Ru(η(6)-p-cymene)(µ-Cl)Cl]2. X-Ray single crystal structures of the two new derivatives, [RuCp(PPh3)2{PhP(OH)2}]CF3SO3 and [Ru(η(6)-p-cymene)Cl2{PhP(OH)2}] have been determined.

Phosphinocyclodextrins as confining units for catalytic metal centres. Applications to carbon-carbon bond forming reactions.

The capacity of two cavity-shaped ligands, HUGPHOS-1 and HUGPHOS-2, to generate exclusively singly phosphorus-ligated complexes, in which the cyclodextrin cavity tightly wraps around the metal centre, was explored with a number of late transition metal cations. Both cyclodextrin-derived ligands were assessed in palladium-catalysed Mizoroki-Heck coupling reactions between aryl bromides and styrene on one hand, and the rhodium-catalysed asymmetric hydroformylation of styrene on the other hand. The inability of both chiral ligands to form standard bis(phosphine) complexes under catalytic conditions was established by high-pressure NMR studies and shown to have a deep impact on the two carbon-carbon bond forming reactions both in terms of activity and selectivity. For example, when used as ligands in the rhodium-catalysed hydroformylation of styrene, they lead to both high isoselectivity and high enantioselectivity. In the study dealing with the Mizoroki-Heck reactions, comparative tests were carried out with WIDEPHOS, a diphosphine analogue of HUGPHOS-2.

Energy and chemicals from the selective electrooxidation of renewable diols by organometallic fuel cells.

Organometallic fuel cells catalyze the selective electrooxidation of renewable diols, simultaneously providing high power densities and chemicals of industrial importance. It is shown that the unique organometallic complex [Rh(OTf)(trop2NH)(PPh3)] employed as molecular active site in an anode of an OMFC selectively oxidizes a number of renewable diols, such as ethylene glycol , 1,2-propanediol (1,2-P), 1,3-propanediol (1,3-P), and 1,4-butanediol (1,4-B) to their corresponding mono-carboxylates. The electrochemical performance of this molecular catalyst is discussed, with the aim to achieve cogeneration of electricity and valuable chemicals in a highly selective electrooxidation from diol precursors.

Ultrasounds in melted poly(ethylene glycol) promote copper-catalyzed cyanation of aryl halides with K(4)[Fe(CN)(6)].

Melted poly(ethylene glycols) (PEGs) were used for the first time as solvent for the sonochemically promoted cyanation of aryl halides employing inexpensive and safe K4[Fe(CN)6] and a relatively low amount of Cu-based catalyst. The Mw (weight-average polymer molecular weight) of PEG proved to notably influence the substrate conversion, which is indicative of a strong dependence of the sonication efficacy on solvent properties. Gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) contributed to the characterization of the polymer and the elucidation of the catalytic system.

Confining phosphanes derived from cyclodextrins for efficient regio- and enantioselective hydroformylation.

Two confining phosphane ligands derived from either α- or ß-cyclodextrin produce singly P(III) -ligated metal complexes with unusual coordination spheres. High-pressure NMR studies have revealed that rhodium hydride complexes of the same type are also formed under hydroformylation conditions. This unique feature strongly favors the formation of the branched aldehyde at the expense of the linear one with high enantioselectivity in the rhodium-catalyzed hydroformylation of styrene.

Electrochemical milling and faceting: size reduction and catalytic activation of palladium nanoparticles.

Improved performance through milling: A method for enhancing the catalytic activity of supported metal nanoparticles is reported. This method enhances the activity for the ethanol electro-oxidation of a supported palladium catalyst. The much higher catalytic performance is ascribed to the increased electrochemically active surface area as well as the generation of high-index facets at the milled nanoparticle surface.

Energy efficiency enhancement of ethanol electrooxidation on Pd-CeO(2)/C in passive and active polymer electrolyte-membrane fuel cells.

Pd nanoparticles have been generated by performing an electroless procedure on a mixed ceria (CeO(2))/carbon black (Vulcan XC-72) support. The resulting material, Pd-CeO(2)/C, has been characterized by means of transmission electron microscopy (TEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and X-ray diffraction (XRD) techniques. Electrodes coated with Pd-CeO(2)/C have been scrutinized for the oxidation of ethanol in alkaline media in half cells as well as in passive and active direct ethanol fuel cells (DEFCs). Membrane electrode assemblies have been fabricated using Pd-CeO(2)/C anodes, proprietary Fe-Co cathodes, and Tokuyama anion-exchange membranes. The monoplanar passive and active DEFCs have been fed with aqueous solutions of 10 wt% ethanol and 2 M KOH, supplying power densities as high as 66 mW cm(-2) at 25 °C and 140 mW cm(-2) at 80 °C. A comparison with a standard anode electrocatalyst containing Pd nanoparticles (Pd/C) has shown that, at even metal loading and experimental conditions, the energy released by the cells with the Pd-CeO(2)/C electrocatalyst is twice as much as that supplied by the cells with the Pd/C electrocatalyst. A cyclic voltammetry study has shown that the co-support ceria contributes to the remarkable decrease of the onset oxidation potential of ethanol. It is proposed that ceria promotes the formation at low potentials of species adsorbed on Pd, Pd(I)-OH(ads), that are responsible for ethanol oxidation.

First microwave-assisted synthesis of an electron-rich phosphane and its coordination chemistry with platinum(II) and palladium(II)

The P-O ligand 3-(di(2-methoxyphenyl)phosphanyl)propionic acid (HL) was synthesized by a microwave-assisted reaction of a secondary phosphane. The coordination of HL to Pt(II) yielded the neutral mononuclear complex trans-[PtCl(κ(2)-P,O-L)(κ-P-HL)] (1), while the reaction of PdClMe(η(4)-COD) (COD = 1,4-cyclooctadiene) with HL in the presence of NEt(3) gave the anionic Pd(II) compound of the formula (HNEt(3))[PdClMe(κ(2)-P,O-L)] (2). Upon crystallization of the latter compound the neutral chloride-bridged dimetallic compound cis-[Pd(µ-Cl)Me(HL)](2) (3) was obtained. HL, 1 and 3·CH(2)Cl(2) have been characterized by single crystal X-ray structure analyses.