Developing a cell-bound detection system for the screening of oxidase activity using the fluorescent peroxide sensor roGFP2-Orp1.

Accurate yet efficient high-throughput screenings have emerged as essential technology for enzyme engineering via directed evolution. Modern high-throughput screening platforms for oxidoreductases are commonly assisted by technologies such as surface display and rely on emulsification techniques to facilitate single-cell analysis via fluorescence-activated cell sorting. Empowered by the dramatically increased throughput, the screening of significantly larger sequence spaces in acceptable time frames is achieved but usually comes at the cost of restricted applicability. In this work, we tackle this problem by utilizing roGFP2-Orp1 as a fluorescent one-component detection system for enzymatic H2O2 formation. We determined the kinetic parameters of the roGFP2-Orp1 reaction with H2O2 and established an efficient immobilization technique for the sensor on Saccharomyces cerevisiae cells employing the lectin Concanavalin A. This allowed to realize a peroxide-sensing shell on enzyme-displaying cells, a system that was successfully employed to screen for H2O2 formation of enzyme variants in a whole-cell setting.

Myeloperoxidase: a target for new drug development?

Myeloperoxidase (MPO), a member of the haem peroxidase-cyclooxygenase superfamily, is abundantly expressed in neutrophils and to a lesser extent in monocytes and certain type of macrophages. MPO participates in innate immune defence mechanism through formation of microbicidal reactive oxidants and diffusible radical species. A unique activity of MPO is its ability to use chloride as a cosubstrate with hydrogen peroxide to generate chlorinating oxidants such as hypochlorous acid, a potent antimicrobial agent. However, evidence has emerged that MPO-derived oxidants contribute to tissue damage and the initiation and propagation of acute and chronic vascular inflammatory disease. The fact that circulating levels of MPO have been shown to predict risks for major adverse cardiac events and that levels of MPO-derived chlorinated compounds are specific biomarkers for disease progression, has attracted considerable interest in the development of therapeutically useful MPO inhibitors. Today, detailed information on the structure of ferric MPO and its complexes with low- and high-spin ligands is available. This, together with a thorough understanding of reaction mechanisms including redox properties of intermediates, enables a rationale attempt in developing specific MPO inhibitors that still maintain MPO activity during host defence and bacterial killing but interfere with pathophysiologically persistent activation of MPO. The various approaches to inhibit enzyme activity of MPO and to ameliorate adverse effects of MPO-derived oxidants will be discussed. Emphasis will be put on mechanism-based inhibitors and high-throughput screening of compounds as well as the discussion of physiologically useful HOCl scavengers.

The respiratory chain of blue-green algae (cyanobacteria).

Electron transport components on the way from reduced substrates to the terminal respiratory oxidase(s) are discussed in relation to analogous and/or homologous enzymes and electron carriers in the generally much better known bacteria, mitochondria and chloroplasts. The kinetic behaviour of the components, their localization within the cell and their evolutionary position are given special attention. Pertinent results from molecular genetics are also mentioned. The unprecedented role of cyanobacteria for our biosphere and our whole planet earth appears to deserve a more extended introductory chapter.

Redox properties of the couple compound I/native enzyme of myeloperoxidase and eosinophil peroxidase.

The standard reduction potential of the redox couple compound I/native enzyme has been determined for human myeloperoxidase (MPO) and eosinophil peroxidase (EPO) at pH 7.0 and 25 degrees C. This was achieved by rapid mixing of peroxidases with either hydrogen peroxide or hypochlorous acid and measuring spectrophotometrically concentrations of the reacting species and products at equilibrium. By using hydrogen peroxide, the standard reduction potential at pH 7.0 and 25 degrees C was 1.16 +/- 0.01 V for MPO and 1.10 +/- 0.01 V for EPO, independently of the concentration of hydrogen peroxide and peroxidases. In the case of hypochlorous acid, standard reduction potentials were dependent on the hypochlorous acid concentration used. They ranged from 1.16 V at low hypochlorous acid to 1.09 V at higher hypochlorous acid for MPO and from 1.10 V to 1.03 V for EPO. Thus, consistent results for the standard reduction potentials of redox couple compound I/native enzyme of both peroxidases were obtained with all hydrogen peroxide and at low hypochlorous acid concentrations: possible reasons for the deviation at higher concentrations of hypochlorous acid are discussed. They include instability of hypochlorous acid, reactions of hypochlorous acid with different amino-acid side chains in peroxidases as well as the appearance of a compound I-chloride complex.

Catalase-peroxidase from synechocystis is capable of chlorination and bromination reactions.

Catalase-peroxidases (KatGs) are multifunctional heme peroxidases exhibiting an overwhelming catalase activity and a substantial peroxidase activity of broad specificity. Here, we show that catalase-peroxidases are also haloperoxidases capable of oxidizing chloride, bromide, and iodide in a peroxide- and enzyme-dependent manner. Recombinant KatG and the variants R119A, W122F, and W122A from the cyanobacterium Synechocystis PCC 6803 have been tested for their halogenation activity. Halogenation of monochlorodimedon (MCD), formation of triiodide and tribromide, and bromide- and chloride-mediated oxidation of glutathione have been tested. Halogenation of MCD by chloride, bromide, and iodide was shown to be catalyzed by wild-type KatG and the variant R119A. Generally, rates of halogenation increased in the order Cl(-) < Br(-) < I(-) and/or by decreasing pH. The halogenation activity of R119A was about 7-9% that of the wild-type enzyme. Upon exchange of the distal Trp122 by Phe and Ala, both the catalase and halogenation activities were lost but the overall peroxidase activity was increased. The findings suggest that the same redox intermediate is involved in H(2)O(2) and halide oxidation and that distal Trp122 is involved in both two-electron reactions. That halides compete with H(2)O(2) for the same redox intermediate is also emphasized by the fact that the polarographically measured catalase activity is influenced by halides, with bromide being more effective than chloride.

A transient kinetic study on the reactivity of recombinant unprocessed monomeric myeloperoxidase.

Spectral and kinetic features of the redox intermediates of human recombinant unprocessed monomeric myeloperoxidase (recMPO), purified from an engineered Chinese hamster ovary cell line, were studied by the multi-mixing stopped-flow technique. Both the ferric protein and compounds I and II showed essentially the same kinetic behavior as the mature dimeric protein (MPO) isolated from polymorphonuclear leukocytes. Firstly, hydrogen peroxide mediated both oxidation of ferric recMPO to compound I (1.9 x 10(7) M(-1) s(-1), pH 7 and 15 degrees C) and reduction of compound I to compound II (3.0 x 10(4) M(-1) s(-1), pH 7 and 15 degrees C). With chloride, bromide, iodide and thiocyanate compound I was reduced back to the ferric enzyme (3.6 x 10(4) M(-1) s(-1), 1.4 x 10(6) M(-1) s(-1), 1.4 x 10(7) M(-1) s(-1) and 1.4 x 10(7) M(-1) s(-1), respectively), whereas the endogenous one-electron donor ascorbate mediated transformation of compound I to compound II (2.3 x 10(5) M(-1) s(-1)) and of compound II back to the resting enzyme (5.0 x 10(3) M(-1) s(-1)). Comparing the data of this study with those known from the mature enzyme strongly suggests that the processing of the precursor enzyme (recMPO) into the mature form occurs without structural changes at the active site and that the subunits in the mature dimeric enzyme work independently.

Spectral and kinetic studies on eosinophil peroxidase compounds I and II and their reaction with ascorbate and tyrosine.

Eosinophil peroxidase, the major granule protein in eosinophils, is the least studied human peroxidase. Here, we have performed spectral and kinetic measurements to study the nature of eosinophil peroxidase intermediates, compounds I and II, and their reduction by the endogenous one-electron donors ascorbate and tyrosine using the sequential-mixing stopped-flow technique. We demonstrate that the peroxidase cycle of eosinophil peroxidase involves a ferryl/porphyrin radical compound I and a ferryl compound II. In the absence of electron donors, compound I is shown to be transformed to a species with a compound II-like spectrum. In the presence of ascorbate or tyrosine compound I is reduced to compound II with a second-order rate constant of (1.0+/-0.2)x10(6) M(-1) s(-1) and (3.5+/-0.2)x10(5) M(-1) s(-1), respectively (pH 7.0, 15 degrees C). Compound II is then reduced by ascorbate and tyrosine to native enzyme with a second-order rate constant of (6.7+/-0.06)x10(3) M(-1) s(-1) and (2.7+/-0.06)x10(4) M(-1) s(-1), respectively. This study revealed that eosinophil peroxidase compounds I and II are able to react with tyrosine and ascorbate via one-electron oxidations and therefore generate monodehydroascorbate and tyrosyl radicals. The relatively fast rates of the compound I reduction demonstrate that these reactions may take place in vivo and are physiologically relevant.

Mechanism of reaction of melatonin with human myeloperoxidase.

Recently, it was suggested that melatonin (N-acetyl-5-methoxytryptamine) is oxidized by activated neutrophils in a reaction most probably involving myeloperoxidase (Biochem. Biophys. Res. Commun. (2000) 279, 657-662). Myeloperoxidase (MPO) is the most abundant protein of neutrophils and is involved in killing invading pathogens. To clarify if melatonin is a substrate of MPO, we investigated the oxidation of melatonin by its redox intermediates compounds I and II using transient-state spectral and kinetic measurements at 25 degrees C. Spectral and kinetic analysis revealed that both compound I and compound II oxidize melatonin via one-electron processes. The second-order rate constant measured for compound I reduction at pH 7 and pH 5 are (6.1 +/- 0.2) x 10(6) M(-1) s(-1) and (1.0 +/- 0.08) x 10(7) M(-1) s(-1), respectively. The rates for the one-electron reduction of compound II back to the ferric enzyme are (9.6 +/- 0.3) x 10(2) M(-1) s(-1) (pH 7) and (2.2 +/- 0.1) x 10(3) M(-1) s(-1) (pH 5). Thus, melatonin is a much better electron donor for compound I than for compound II. Steady-state experiments showed that the rate of oxidation of melatonin is dependent on the H(2)O(2) concentration, is not affected by superoxide dismutase, and is quickly terminated by sodium cyanide. Melatonin can markedly inhibit the chlorinating activity of MPO at both pH 7 and pH 5. The implication of these findings in the activated neutrophil is discussed.

The role of distal tryptophan in the bifunctional activity of catalase-peroxidases.

Catalase-peroxidases are bifunctional peroxidases exhibiting an overwhelming catalase activity and a substantial peroxidase activity. Here we present a kinetic study of the formation and reduction of the key intermediate compound I by probing the role of the conserved tryptophan at the distal haem cavity site. Two wild-type proteins and three mutants of Synechocystis catalase-peroxidase (W122A and W122F) and Escherichia coli catalase-peroxidase (W105F) have been investigated by steady-state and stopped-flow spectroscopy. W122F and W122A completely lost their catalase activity whereas in W105F the catalase activity was reduced by a factor of about 5000. However, the mutations did not influence both formation of compound I and its reduction by peroxidase substrates. It was demonstrated unequivocally that the rate of compound I reduction by pyrogallol or o-dianisidine sometimes even exceeded that of the wild-type enzyme. This study demonstrates that the indole ring of distal Trp in catalase-peroxidases is essential for the two-electron reduction of compound I by hydrogen peroxide but not for compound I formation or for peroxidase reactivity (i.e. the one-electron reduction of compound I).

The molecular peculiarities of catalase-peroxidases.

In developing ideas of how protein structure modifies haem reactivity, the activity of Class I of the plant peroxidase superfamily (including cytochrome c peroxidase, ascorbate peroxidase and catalase-peroxidases (KatGs)) is an exciting field of research. Despite striking sequence homologies, there are dramatic differences in catalytic activity and substrate specificity with KatGs being the only member with substantial catalase activity. Based on multiple sequence alignment performed for Class I peroxidases, we present a hypothesis for the pronounced catalase activity of KatGs. In their catalytic domains KatGs are shown to possess three large insertions, two of them are typical for KatGs showing highly conserved sequence patterns. Besides an extra C-terminal copy of the ancestral hydroperoxidase gene resulting from gene duplication, these two large loops are likely to control the orientation of both the haem group and of essential residues in the active site. They seem to modulate the access of substrates to the prosthetic group at the distal side as well as the flexibility and character of the bond between the proximal histidine and the ferric iron. The hypothesis presented opens new possibilities in the rational engineering of peroxidases.

Spectral and kinetic studies on the formation of eosinophil peroxidase compound I and its reaction with halides and thiocyanate.

Compound I of peroxidases takes part in both the peroxidation and the halogenation reaction. This study for the first time presents transient kinetic measurements of the formation of compound I of human eosinophil peroxidase (EPO) and its reaction with halides and thiocyanate, using the sequential-mixing stopped-flow technique. Addition of 1 equiv of hydrogen peroxide to native EPO leads to complete formation of compound I. At pH 7 and 15 degrees C, the apparent second-order rate constant is (4.3 +/- 0.4) x 10(7) M(-1) s(-1). The rate for compound I formation by hypochlorous acid is (5.6 +/- 0.7) x 10(7) M(-1) s(-1). EPO compound I is unstable and decays to a stable intermediate with a compound II-like spectrum. At pH 7, the two-electron reduction of compound I to the native enzyme by thiocyanate has a second-order rate constant of (1.0 +/- 0. 5) x 10(8) M(-1) s(-1). Iodide [(9.3 +/- 0.7) x 10(7) M(-1) s(-1)] is shown to be a better electron donor than bromide [(1.9 +/- 0.1) x 10(7) M(-1) s(-1)], whereas chloride oxidation by EPO compound I is extremely slow [(3.1 +/- 0.3) x 10(3) M(-1) s(-1)]. The pH dependence studies suggest that a protonated form of compound I is more competent in oxidizing the anions. The results are discussed in comparison with those of the homologous peroxidases myeloperoxidase and lactoperoxidase and with respect to the role of EPO in host defense and tissue injury.

Two-electron reduction and one-electron oxidation of organic hydroperoxides by human myeloperoxidase.

The reaction of native myeloperoxidase (MPO) and its redox intermediate compound I with hydrogen peroxide, ethyl hydroperoxide, peroxyacetic acid, t-butyl hydroperoxide, 3-chloroperoxybenzoic acid and cumene hydroperoxide was studied by multi-mixing stopped-flow techniques. Hydroperoxides are decomposed by MPO by two mechanisms. Firstly, the hydroperoxide undergoes a two-electron reduction to its corresponding alcohol and heme iron is oxidized to compound I. At pH 7 and 15 degrees C, the rate constant of the reaction between 3-chloroperoxybenzoic acid and ferric MPO was similar to that with hydrogen peroxide (1.8x10(7) M(-1) s(-1) and 1.4x10(7) M(-1) s(-1), respectively). With the exception of t-butyl hydroperoxide, the rates of compound I formation varied between 5.2x10(5) M(-1) s(-1) and 2.7x10(6) M(-1) s(-1). Secondly, compound I can abstract hydrogen from these peroxides, producing peroxyl radicals and compound II. Compound I reduction is shown to be more than two orders of magnitude slower than compound I formation. Again, with 3-chloroperoxybenzoic acid this reaction is most effective (6. 6x10(4) M(-1) s(-1) at pH 7 and 15 degrees C). Both reactions are controlled by the same ionizable group (average pK(a) of about 4.0) which has to be in its conjugated base form for reaction.

The reactivity of myeloperoxidase compound I formed with hypochlorous acid.

The reaction of human myeloperoxidase (MPO) with hypochlorous acid (HOCl) was investigated by conventional stopped-flow spectroscopy at pH 5, 7, and 9. In the reaction of MPO with HOCl, compound I is formed. Its formation is strongly dependent on pH. HOCl (rather than OCl-) reacts with the unprotonated enzyme in its ferric state. Apparent second-order rate constants were determined to be 8.1 x 10(7) M(-1)s(-1) (pH 5), 2.0 x 10(8) M(-1)s(-1) (pH 7) and 2.0 x 10(6) M(-1)s(-1) (pH 9) at 15 degrees C. Furthermore, the kinetics and spectra of the reactions of halides and thiocyanate and of physiologically relevant one-electron donors (ascorbate, nitrite, tyrosine and hydrogen peroxide) with this compound I were investigated using the sequential-mixing technique. The results show conclusively that the redox intermediates formed upon addition of either hydrogen peroxide or hypochlorous acid to native MPO exhibit the same spectral features and reactivities and thus are identical. In stopped-flow investigations, the MPO/HOCl system has some advantage since: (i) in contrast to H2O2, HOCl cannot function as a one-electron donor of compound I; and (ii) MPO can easily be prevented from cycling by addition of methionine as HOCl scavenger. As a consequence, the observed absorbance changes are bigger and errors in data analysis are smaller.

Oxidation of hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone by human myeloperoxidase.

Myeloperoxidase is very susceptible to reducing radicals because the reduction potential of the ferric/ferrous redox couple is much higher compared with other peroxidases. Semiquinone radicals are known to reduce heme proteins. Therefore, the kinetics and spectra of the reactions of p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone with compounds I and II were investigated using both sequential-mixing stopped-flow techniques and conventional spectrophotometric measurements. At pH 7 and 15 degrees C the rate constants for compound I reacting with p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone were determined to be 5.6+/-0.4 x 10(7) M(-1)s(-1), 1.3+/-0.1 x 10(6) M(-1)s(-1) and 3.1+/-0.3 x 10(6) M(-1)s(-1), respectively. The corresponding reaction rates for compound II reduction were calculated to be 4.5+/-0.3 x 10(6) M(-1)s(-1), 1.9+/-0.1 x 10(5) M(-1)s(-1) and 4.5+/-0.2 x 10(4) M(-1)s(-1), respectively. Semiquinone radicals, produced by compounds I and II in the classical peroxidation cycle, promote compound III (oxymyeloperoxidase) formation. We could monitor formation of ferrous myeloperoxidase as well as its direct transition to compound II by addition of molecular oxygen. Formation of ferrous myeloperoxidase is shown to depend strongly on the reduction potential of the corresponding redox couple benzoquinone/semiquinone. With 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone as substrate, myeloperoxidase is extremely quickly trapped as compound III. These MPO-typical features could have potential in designing specific drugs which inhibit the production of hypochlorous acid and consequently attenuate inflammatory tissue damage.

Mechanism of reaction of myeloperoxidase with hydrogen peroxide and chloride ion.

The reaction of myeloperoxidase compound I (MPO-I) with chloride ion is widely assumed to produce the bacterial killing agent after phagocytosis. Two values of the rate constant for this important reaction have been published previously: 4.7 x 106 M-1.s-1 measured at 25 degrees C [Marquez, L.A. and Dunford, H.B. (1995) J. Biol. Chem. 270, 30434-30440], and 2.5 x 104 M-1.s-1 at 15 degrees C [Furtmüller, P.G., Burner, U. & Obinger, C. (1998) Biochemistry 37, 17923-17930]. The present paper is the result of a collaboration of the two groups to resolve the discrepancy in the rate constants. It was found that the rate constant for the reaction of compound I, generated from myeloperoxidase (MPO) and excess hydrogen peroxide with chloride, decreased with increasing chloride concentration. The rate constant published in 1995 was measured over a lower chloride concentration range; the 1998 rate constant at a higher range. Therefore the observed conversion of compound I to native enzyme in the presence of hydrogen peroxide and chloride ion cannot be attributed solely to the single elementary reaction MPO-I + Cl- --> MPO + HOCl. The simplest mechanism for the overall reaction which fit the experimental data is the following: MPO+H2O2 ⇄k-1k1 MPO-I+H2O MPO-I+Cl- ⇄k-2k2 MPO-I-Cl- MPO-I-Cl- -->k3 MPO+HOCl where MPO-I-Cl- is a chlorinating intermediate. We can now say that the 1995 rate constant is k2 and the corresponding reaction is rate-controlling at low [Cl-]. At high [Cl-], the reaction with rate constant k3 is rate controlling. The 1998 rate constant for high [Cl-] is a composite rate constant, approximated by k2k3/k-2. Values of k1 and k-1 are known from the literature. Results of this study yielded k2 = 2.2 x 106 M-1.s-1, k-2 = 1.9 x 105 s-1 and k3 = 5.2 x 104 s-1. Essentially identical results were obtained using human myeloperoxidase and beef spleen myeloperoxidase.

Nucleotide sequence analysis, overexpression in Escherichia coli and kinetic characterization of Anacystis nidulans catalase-peroxidase.

Bifunctional catalase-peroxidases are the least understood type of peroxidases. A high-level expression in Escherichia coli of a fully active recombinant form of a catalase-peroxidase (KatG) from the cyanobacterium Anacystis nidulans (Synechococcus PCC 6301) is reported. Since both physical and kinetic characterization revealed its identity with the wild-type protein, the large quantities of recombinant KatG allowed the examination of both the spectral characteristics and the reactivity of its redox intermediates by using the multi-mixing stopped-flow technique. The homodimeric acidic protein (pI = 4.6) contained high catalase activity (apparent K(m) = 4.8 mM and apparent k(cat) = 8850 s(-1)). Cyanide is shown to be an effective inhibitor of the catalase reaction. The second-order rate constant for cyanide binding to the ferric protein is (6.9 +/- 0.2) x 10(5) M(-1 )s(-1) at pH 7.0 and 15 degrees C and the dissociation constant of the cyanide complex is 17 microM. Because of the overwhelming catalase activity, peroxoacetic acid has been used for compound I formation. The apparent second-order rate constant for formation of compound I from the ferric enzyme and peroxoacetic acid is (1.3 +/- 0.3) x 10(4 )M(-1 )s(-1) at pH 7.0 and 15 degrees C. The spectrum of compound I is characterized by about 40% hypochromicity, a Soret region at 406 nm, and isosbestic points between the native enzyme and compound I at 355 and 428 nm. Rate constants for reduction of KatG compound I by o-dianisidine, pyrogallol, aniline and isoniazid are shown to be (7.3 +/- 0.4) x 10(6) M(-1 )s(-1), (5.4 +/- 0.3) x 10(5) M(-1 )s(-1), (1.6 +/- 0.3) x 10(5) M(-1 )s(-1) and (4.3 +/- 0.2) x 10(4) M(-1 )s(-1), respectively. The redox intermediate formed upon reduction of compound I did not exhibit the classical red-shifted peroxidase compound II spectrum which characterizes the presence of a ferryl oxygen species. Its spectral features indicate that the single oxidizing equivalent in KatG compound II is contained on an amino acid which is not electronically coupled to the heme.

Effect of distal cavity mutations on the formation of compound I in catalase-peroxidases.

Catalase-peroxidases have a predominant catalase activity but differ from monofunctional catalases in exhibiting a substantial peroxidase activity and in having different residues in the heme cavity. We present a kinetic study of the formation of the key intermediate compound I by probing the role of the conserved distal amino acid triad Arg-Trp-His of a recombinant catalase-peroxidase in its reaction with hydrogen peroxide, peroxoacetic acid, and m-chloroperbenzoic acid. Both the wild-type enzyme and six mutants (R119A, R119N, W122F, W122A, H123Q, H123E) have been investigated by steady-state and stopped-flow spectroscopy. The turnover number of catalase activity of R119A is 14.6%, R119N 0.5%, H123E 0.03%, and H123Q 0.02% of wild-type activity. Interestingly, W122F and W122A completely lost their catalase activity but retained their peroxidase activity. Bimolecular rate constants of compound I formation of the wild-type enzyme and the mutants have been determined. The Trp-122 mutants for the first time made it possible to follow the transition of the ferric enzyme to compound I by hydrogen peroxide spectroscopically underlining the important role of Trp-122 in catalase activity. The results demonstrate that the role of the distal His-Arg pair in catalase-peroxidases is important in the heterolytic cleavage of hydrogen peroxide (i.e. compound I formation), whereas the distal tryptophan is essential for compound I reduction by hydrogen peroxide.

Mechanism of reaction of myeloperoxidase with nitrite.

Myeloperoxidase (MPO) is a major neutrophil protein and may be involved in the nitration of tyrosine residues observed in a wide range of inflammatory diseases that involve neutrophils and macrophage activation. In order to clarify if nitrite could be a physiological substrate of myeloperoxidase, we investigated the reactions of the ferric enzyme and its redox intermediates, compound I and compound II, with nitrite under pre-steady state conditions by using sequential mixing stopped-flow analysis in the pH range 4-8. At 15 degrees C the rate of formation of the low spin MPO-nitrite complex is (2.5 +/- 0.2) x 10(4) m(-1) s(-1) at pH 7 and (2.2 +/- 0.7) x 10(6) m(-1) s(-1) at pH 5. The dissociation constant of nitrite bound to the native enzyme is 2.3 +/- 0.1 mm at pH 7 and 31.3 +/- 0.5 micrometer at pH 5. Nitrite is oxidized by two one-electron steps in the MPO peroxidase cycle. The second-order rate constant of reduction of compound I to compound II at 15 degrees C is (2.0 +/- 0.2) x 10(6) m(-1) s(-1) at pH 7 and (1.1 +/- 0.2) x 10(7) m(-1) s(-1) at pH 5. The rate constant of reduction of compound II to the ferric native enzyme at 15 degrees C is (5.5 +/- 0.1) x 10(2) m(-1) s(-1) at pH 7 and (8.9 +/- 1.6) x 10(4) m(-1) s(-1) at pH 5. pH dependence studies suggest that both complex formation between the ferric enzyme and nitrite and nitrite oxidation by compounds I and II are controlled by a residue with a pK(a) of (4.3 +/- 0.3). Protonation of this group (which is most likely the distal histidine) is necessary for optimum nitrite binding and oxidation.

Catalase-peroxidase from the cyanobacterium Synechocystis PCC 6803: cloning, overexpression in Escherichia coli, and kinetic characterization.

The Synechocystis PCC 6803 katG gene encodes a dual-functional catalase-peroxidase (EC 1.11.1.7). We have established a system for the high level expression of a fully active recombinant form of this enzyme. Its entire coding DNA was extended using a synthetic oligonucleotide encoding a hexa-histidine tag at the C-terminus and expressed in Escherichia coli [BL21-(DE3)pLysS] using the pET-3a vector. Hemin was added to the culture medium to ensure its proper association with KatG upon induction. The expressed protein was purified to homogeneity by two chromatography steps including a metal chelate affinity and hydrophobic interaction chromatography. The homodimeric acidic protein (pl = 5.4) had a molecular mass of 170 kDa and a Reinheitszahl (A406/A280) of 0.64. The recombinant protein contained high catalase activity (apparent Km = 4.9 +/- 0.25 mM and apparent kcat = 3500 s(-1)) and an appreciable peroxidase activity with o-dianisidine, guaiacol and pyrogallol, but not with NAD(P)H, ferrocytochrome c, ascorbate or glutathione as electron donors. By using both conventional and sequential stopped-flow spectroscopy, formation of compound I with peroxoacetic acid was calculated to be (8.74 +/- 0.26) x 10(3) M(-1) s(-1), whereas compound I reduction by o-dianisidine, pyrogallol and ascorbate was determined to be (2.71 +/- 0.03) x 10(6) M(-1) S(-1), (8.62 +/- 0.21) x 10(4) M(-1) S(-1), and (5.43 +/- 0.19) x 10(3) M(-1) S(-1), respectively. Cyanide binding studies on native and recombinant enzyme indicated that both have the same heme environment. An apparent second-order rate constant for cyanide binding of (4.8 +/- 0.1) x 10(5) M(-1) S(-1) was obtained.