The effect of remodelling and contractility of the actin cytoskeleton on the shear resistance of single cells: a computational and experimental investigation.

The biomechanisms that govern the response of chondrocytes to mechanical stimuli are poorly understood. In this study, a series of in vitro tests are performed, in which single chondrocytes are subjected to shear deformation by a horizontally moving probe. Dramatically different probe force-indentation curves are obtained for untreated cells and for cells in which the actin cytoskeleton has been disrupted. Untreated cells exhibit a rapid increase in force upon probe contact followed by yielding behaviour. Cells in which the contractile actin cytoskeleton was removed exhibit a linear force-indentation response. In order to investigate the mechanisms underlying this behaviour, a three-dimensional active modelling framework incorporating stress fibre (SF) remodelling and contractility is used to simulate the in vitro tests. Simulations reveal that the characteristic force-indentation curve observed for untreated chondrocytes occurs as a result of two factors: (i) yielding of SFs due to stretching of the cytoplasm near the probe and (ii) dissociation of SFs due to reduced cytoplasm tension at the front of the cell. In contrast, a passive hyperelastic model predicts a linear force-indentation curve similar to that observed for cells in which the actin cytoskeleton has been disrupted. This combined modelling-experimental study offers a novel insight into the role of the active contractility and remodelling of the actin cytoskeleton in the response of chondrocytes to mechanical loading.

Development of chondroitin sulfate encapsulated PLGA microsphere delivery systems with controllable multiple burst releases for treating osteoarthritis.

The purpose of the study was to design and develop unique drug delivery systems with controllable multiple burst releases of drugs for treating osteoarthritis. Chondroitin sulfate (CS) was encapsulated into four types of PLGA materials, that is, PLGA 50:50, PLGA 65:35, PLGA 75:25, and PLGA 85:15. The effects of microsphere size and various combinations of blend PLGA microspheres on CS release were investigated. The cytotoxicity of the CS-encapsulated microspheres was investigated according to the ISO 10993 guideline. Our study showed that the encapsulation efficiency of CS into PLGA 50:50 microspheres varied with the size of microspheres; however, the encapsulation efficiencies of CS into PLGA microspheres were independent of the types of PLGA materials. The size of PLGA microspheres was shown to affect the rate of CS release. With the increase of microsphere size from 75-150 µm to 300-355 µm, the initial CS release decreased. Further increase in microsphere size led to an increase in the initial CS release. In addition, combination of different types of PLGA microspheres was shown to be capable of achieving multiple burst CS releases. Moreover, the CS encapsulated PLGA microspheres were shown to be non-cytotoxic. This study proved the concept of multiple burst drug releases that were achieved by encapsulating CS into different types of PLGA microspheres and delivering CS from systems consisting of mixed types of PLGA microspheres, which may be applied to treat osteoarthritis by mimicking multiple intra-joint injection of therapeutic agents.

Biomechanics of single chondrocytes under direct shear.

Articular chondrocytes experience a variety of mechanical stimuli during daily activity. One such stimulus, direct shear, is known to affect chondrocyte homeostasis and induce catabolic or anabolic pathways. Understanding how single chondrocytes respond biomechanically and morphologically to various levels of applied shear is an important first step toward elucidating tissue level responses and disease etiology. To this end, a novel videocapture method was developed in this study to examine the effect of direct shear on single chondrocytes, applied via the controlled lateral displacement of a shearing probe. Through this approach, precise force and deformation measurements could be obtained during the shear event, as well as clear pictures of the initial cell-to-probe contact configuration. To further study the non-uniform shear characteristics of single chondrocytes, the probe was positioned in three different placement ranges along the cell height. It was observed that the apparent shear modulus of single chondrocytes decreased as the probe transitioned from being close to the cell base (4.1 +/- 1.3 kPa), to the middle of the cell (2.6 +/- 1.1 kPa), and then near its top (1.7 +/- 0.8 kPa). In addition, cells experienced the greatest peak forward displacement (approximately 30% of their initial diameter) when the probe was placed low, near the base. Forward cell movement during shear, regardless of its magnitude, continued until it reached a plateau at ~35% shear strain for all probe positions, suggesting that focal adhesions become activated at this shear level to firmly adhere the cell to its substrate. Based on intracellular staining, the observed height-specific variation in cell shear stiffness and plateau in forward cell movement appeared to be due to a rearrangement of focal adhesions and actin at higher shear strains. Understanding the fundamental mechanisms at play during shear of single cells will help elucidate potential treatments for chondrocyte pathology and loading regimens related to cartilage health and disease.

Unique biomechanical interactions between myeloma cells and bone marrow stroma cells.

We observed that BMSCs (bone marrow stromal cells) from myeloma patients (myeloma BMSCs) were significantly stiffer than control BMSCs using a cytocompression device. The stiffness of myeloma BMSCs and control BMSCs was further increased upon priming by myeloma cells. Additionally, myeloma cells became stiffer when primed by myeloma BMSCs. The focal adhesion kinase activity of myeloma cells was increased when cells were on stiffer collagen gels and on myeloma BMSCs. This change in myeloma stiffness is associated with increased colony formation of myeloma cells and FAK activation when co-cultured with stiffer myeloma BMSCs or stiffer collagen. Additionally, stem cells of RPMI8226 cells became stiffer after priming by myeloma BMSCs, with concomitant increases of stem cell colony formation. These results suggest the presence of a mechanotransduction loop between myeloma cells and myeloma BMSCs to increase the stiffness of both types of cells via FAK activation. The increase of stiffness may in turn support the growth of myeloma cells and myeloma stem cells.

Contribution of the cytoskeleton to the compressive properties and recovery behavior of single cells.

The cytoskeleton is known to play an important role in the biomechanical nature and structure of cells, but its particular function in compressive characteristics has not yet been fully examined. This study focused on the contribution of the main three cytoskeletal elements to the bulk compressive stiffness (as measured by the compressive modulus), volumetric or apparent compressibility changes (as further indicated by apparent Poisson's ratio), and recovery behavior of individual chondrocytes. Before mechanical testing, cytochalasin D, acrylamide, or colchicine was used to disrupt actin microfilaments, intermediate filaments, or microtubules, respectively. Cells were subjected to a range of compressive strains and allowed to recover to equilibrium. Analysis of the video recording for each mechanical event yielded relevant compressive properties and recovery characteristics related to the specific cytoskeletal disrupting agent and as a function of applied axial strain. Inhibition of actin microfilaments had the greatest effect on bulk compressive stiffness ( approximately 50% decrease compared to control). Meanwhile, intermediate filaments and microtubules were each found to play an integral role in either the diminution (compressibility) or retention (incompressibility) of original cell volume during compression. In addition, microtubule disruption had the largest effect on the "critical strain threshold" in cellular mechanical behavior (33% decrease compared to control), as well as the characteristic time for recovery ( approximately 100% increase compared to control). Elucidating the role of the cytoskeleton in the compressive biomechanical behavior of single cells is an important step toward understanding the basis of mechanotransduction and the etiology of cellular disease processes.

Mechanical characterization of differentiated human embryonic stem cells.

Human embryonic stem cells (hESCs) possess an immense potential in a variety of regenerative applications. A firm understanding of hESC mechanics, on the single cell level, may provide great insight into the role of biophysical forces in the maintenance of cellular phenotype and elucidate mechanical cues promoting differentiation along various mesenchymal lineages. Moreover, cellular biomechanics can provide an additional tool for characterizing stem cells as they follow certain differentiation lineages, and thus may aid in identifying differentiated hESCs, which are most suitable for tissue engineering. This study examined the viscoelastic properties of single undifferentiated hESCs, chondrogenically differentiated hESC subpopulations, mesenchymal stem cells (MSCs), and articular chondrocytes (ACs). hESC chondrogenesis was induced using either transforming growth factor-beta1 (TGF-beta1) or knock out serum replacer as differentiation agents, and the resulting cell populations were separated based on density. All cell groups were mechanically tested using unconfined creep cytocompression. Analyses of subpopulations from all differentiation regimens resulted in a spectrum of mechanical and morphological properties spanning the range of hESCs to MSCs to ACs. Density separation was further successful in isolating cellular subpopulations with distinct mechanical properties. The instantaneous and relaxed moduli of subpopulations from TGF-beta1 differentiation regimen were statistically greater than those of undifferentiated hESCs. In addition, two subpopulations from the TGF-beta1 group were identified, which were not statistically different from native articular chondrocytes in their instantaneous and relaxed moduli, as well as their apparent viscosity. Identification of a differentiated hESC subpopulation with similar mechanical properties as native chondrocytes may provide an excellent cell source for tissue engineering applications. These cells will need to withstand any mechanical stimulation regimen employed to augment the mechanical and biochemical characteristics of the neotissue. Density separation was effective at purifying distinct populations of cells. A differentiated hESC subpopulation was identified with both similar mechanical and morphological characteristics as ACs. Future research may utilize this cell source in cartilage regeneration efforts.

In situ mechanical properties of the chondrocyte cytoplasm and nucleus.

The way in which the nucleus experiences mechanical forces has important implications for understanding mechanotransduction. Knowledge of nuclear material properties and, specifically, their relationship to the properties of the bulk cell can help determine if the nucleus directly experiences mechanical loads, or if it is a signal transduction mechanism secondary to cell membrane deformation that leads to altered gene expression. Prior work measuring nuclear material properties using micropipette aspiration suggests that the nucleus is substantially stiffer than the bulk cell [Guilak, F., Tedrow, J.R., Burgkart, R., 2000. Viscoelastic properties of the cell nucleus. Biochem. Biophys. Res. Commun. 269, 781-786], whereas recent work with unconfined compression of single chondrocytes showed a nearly one-to-one correlation between cellular and nuclear strains [Leipzig, N.D., Athanasiou, K.A., 2008. Static compression of single chondrocytes catabolically modifies single-cell gene expression. Biophys. J. 94, 2412-2422]. In this study, a linearly elastic finite element model of the cell with a nuclear inclusion was used to simulate the unconfined compression data. Cytoplasmic and nuclear stiffnesses were varied from 1 to 7 kPa for several combinations of cytoplasmic and nuclear Poisson's ratios. It was found that the experimental data were best fit when the ratio of cytoplasmic to nuclear stiffness was 1.4, and both cytoplasm and nucleus were modeled as incompressible. The cytoplasmic to nuclear stiffness ratio is significantly lower than prior reports for isolated nuclei. These results suggest that the nucleus may behave mechanically different in situ than when isolated.

Matrix development in self-assembly of articular cartilage.

BACKGROUND: Articular cartilage is a highly functional tissue which covers the ends of long bones and serves to ensure proper joint movement. A tissue engineering approach that recapitulates the developmental characteristics of articular cartilage can be used to examine the maturation and degeneration of cartilage and produce fully functional neotissue replacements for diseased tissue. METHODOLOGY/PRINCIPAL FINDINGS: This study examined the development of articular cartilage neotissue within a self-assembling process in two phases. In the first phase, articular cartilage constructs were examined at 1, 4, 7, 10, 14, 28, 42, and 56 days immunohistochemically, histologically, and through biochemical analysis for total collagen and glycosaminoglycan (GAG) content. Based on statistical changes in GAG and collagen levels, four time points from the first phase (7, 14, 28, and 56 days) were chosen to carry into the second phase, where the constructs were studied in terms of their mechanical characteristics, relative amounts of collagen types II and VI, and specific GAG types (chondroitin 4-sulfate, chondroitin 6-sulfate, dermatan sulfate, and hyaluronan). Collagen type VI was present in initial abundance and then localized to a pericellular distribution at 4 wks. N-cadherin activity also spiked at early stages of neotissue development, suggesting that self-assembly is mediated through a minimization of free energy. The percentage of collagen type II to total collagen significantly increased over time, while the proportion of collagen type VI to total collagen decreased between 1 and 2 wks. The chondroitin 6- to 4- sulfate ratio decreased steadily during construct maturation. In addition, the compressive properties reached a plateau and tensile characteristics peaked at 4 wks. CONCLUSIONS/SIGNIFICANCE: The indices of cartilage formation examined in this study suggest that tissue maturation in self-assembled articular cartilage mirrors known developmental processes for native tissue. In terms of tissue engineering, it is suggested that exogenous stimulation may be necessary after 4 wks to further augment the functionality of developing constructs.

Effects of TGF-beta1 and IGF-I on the compressibility, biomechanics, and strain-dependent recovery behavior of single chondrocytes.

The responses of articular chondrocytes to physicochemical stimuli are intimately linked to processes that can lead to both degenerative and regenerative processes. Toward understanding this link, we examined the biomechanical behavior of single chondrocytes in response to growth factors (IGF-I and TGF-beta1) and a range of compressive strains. The results indicate that the growth factors alter the biomechanics of the cells in terms of their stiffness coefficient ( approximately two-fold increase over control) and compressibility, as measured by an apparent Poisson's ratio ( approximately two-fold increase over control also). Interestingly, the compressibility decreased significantly with respect to the applied strain. Moreover, we have again detected a critical strain threshold in chondrocytes at approximately 30% strain in all treatments. Overall, these findings demonstrate that cellular biomechanics change in response to both biochemical and biomechanical perturbations. Understanding the underlying biomechanics of chondrocytes in response to such stimuli may be useful in understanding various aspects of cartilage, including the study of osteoarthritis and the development of tissue-engineering strategies.