Stabilization of adalimumab Fab through the introduction of disulfide bonds between the variable and constant domains.

Fab is a promising format for antibody drug. Therefore, efforts have been made to improve its thermal stability for therapeutic and commercial use. So far, we have attempted to introduce a disulfide bond into the Fab fragment to improve its thermal stability and demonstrated that it is possible to do this without sacrificing its biochemical function. In this study, to develop a novel stabilization strategy for Fab, we attempted to introduce a disulfide bond between the variable and constant domains and prepared three variants of Fab; H:G10C + H:P210C, L:P40C + L:E165C, and H:G10C + H:P210C + L:P40C + L:E165C. Differential scanning calorimetry measurements showed that each of these variants had improved thermal stability. In addition, the variants with two disulfide bonds demonstrated a 6.5 °C increase in their denaturation temperatures compared to wild-type Fab. The introduction of disulfide bonds was confirmed by X-ray crystallography, and the variants retained their antigen-binding activity. The variants were also found to be less aggregative than the wild type. Our results demonstrate that the introduction of a disulfide bond between the variable and constant domains significantly improves the thermal stability of Fab.

Enhancing thermal stability in the CH2 domain to suppress aggregation through the introduction of simultaneous disulfide bonds in Pichia pastoris.

Protein aggregations decrease production yields and impair the efficacy of therapeutics. The CH2 domain is a crucial part of the constant region of human IgG. But, it is also the least stable domain in IgG, which can result in antibody instability and aggregation problems. We created a novel mutant of the CH2 domain (T250C/L314C, mut10) by introducing a disulfide bond and expressed it using Pichia pastoris. The mut10 variant exhibited enhanced thermal stability, resistance to enzymatic degradation, and reduced aggregation in comparison to the original CH2 domain. However, it was less stable than mut20 (L242C/K334C), which is the variant prepared in a previous study (Gong et al., J. Biol. Chem., 2009). A more advanced mutant, mut25, was created by combining mut10 and mut20. Mut25 artificially contains two disulfide bonds. The new mutant, mut25, showed enhanced thermal stability, increased resistance to enzymatic digestion, and reduced aggregation in comparison to mut20. According to our knowledge, mut25 achieves an unprecedented level of stability among the humanized whole CH2 domains that have been reported so far. Mut25 has the potential to serve as a new platform for antibody therapeutics due to its ability to reduce immunogenicity by decreasing aggregation.

Analysis of thermostability for seven Phe to Ala and six Pro to Gly mutants in the Fab constant region of adalimumab.

To identify amino acids that play important roles in the structural stability of Fab, seven phenylalanine residues in the Fab constant region of the therapeutic antibody adalimumab were subjected to alanine mutagenesis. Six Fab mutants, H:F130A, H:F154A, H:F174A, L:F118A, L:F139A and L:F209A, showed decreased thermostability compared with wild-type Fab. In contrast, the Tm for the L:F116A mutant was 1.7°C higher than that of wild-type Fab, indicating that the F116 residue was unfavorable for Fab thermostability. Six proline mutants, H:P131G, H:P155G, H:P175G, L:P119G, L:P120G and L:P141G, were also prepared to investigate the effect of proline residues adjacent to mutated phenylalanine residues. The thermostability of the H:P155G and L:P141G mutants in particular was significantly reduced, with decreases in Tm of 5.0 and 3.0°C, respectively, compared with wild-type Fab. The H:P155 and L:P141 residues have a cis conformation, whereas the other mutated proline residues have a trans conformation. H:P155 and L:P141 had stacking interactions with the H:F154 and L:Y140, respectively, at the interface between the variable and constant regions. It is suggested that the interactions of the aromatic ring with a cis-form proline at the interface between the variable and constant regions is important for stability of Fab.

Effect of an intermolecular disulfide bond introduced into the first loop of CH1 domain of Adalimumab Fab on thermal stability and antigen-binding activity.

The introduction of intermolecular disulfide bonds by amino acid mutations is an effective method for stabilizing dimeric proteins. X-ray crystal structure of Fab of a therapeutic antibody, adalimumab, revealed the first loop of the CH1 domain to be partially unsolved at position 135-141. To find new sites for the introduction of intermolecular disulfide bonds in adalimumab Fab, Fab mutants targeting the unsolved region were predicted using molecular simulation software. Four Fab mutants, H:K137C-L:I117C, H:K137C-L:F209C, H:S138C-L:F116C and H:S140C-L:S114C, were expressed in the methylotrophic yeast Pichia pastoris. SDS-PAGE analysis of these mutants indicated that H:K137C-L:F209C, H:S138C-L:F116C and H:S140C-L:S114C mutants mostly formed intermolecular disulfide bonds, whereas some H:K137C-L:I117C mutants formed intermolecular disulfide bonds and some did not. Differential scanning calorimetry measurements showed increased thermal stability in all Fab mutants with engineered disulfide bonds. The bio-layer interferometry measurements, for binding of the antigen tumor necrotic factor α, indicated that Fab mutants had less antigen-binding activity than wild-type Fab. In particular, the KD value of H:K137C-L:F209C was ~17 times higher than that of wild-type Fab. Thus, we successfully introduced intermolecular disulfide bonds between the first loop region of the CH1 and CL domains and observed that it increases the thermostability of Fab and affects the antigen-binding activity.

A comprehensive analysis of novel disulfide bond introduction site into the constant domain of human Fab.

Generally, intermolecular disulfide bond contribute to the conformational protein stability. To identify sites where intermolecular disulfide bond can be introduced into the Fab's constant domain of the therapeutic IgG, Fab mutants were predicted using the MOE software, a molecular simulator, and expressed in Pichia pastoris. SDS-PAGE analysis of the prepared Fab mutants from P. pastoris indicated that among the nine analyzed Fab mutants, the F130C(H):Q124C(L), F174C(H):S176C(L), V177C(H):Q160C(L), F174C(H):S162C(L), F130C(H):S121C(L), and A145C(H):F116C(L) mutants mostly formed intermolecular disulfide bond. All these mutants showed increased thermal stability compared to that of Fab without intermolecular disulfide bond. In the other mutants, the intermolecular disulfide bond could not be completely formed, and the L132C(H):F118C(L) mutant showed only a slight decrease in binding activity and ß-helix content, owing to the exertion of adverse intermolecular disulfide bond effects. Thus, our comprehensive analysis reveals that the introduction of intermolecular disulfide bond in the Fab's constant domain is possible at various locations. These findings provide important insights for accomplishing human Fab stabilization.

Abolition of aggregation of CH2 domain of human IgG1 when combining glycosylation and protein stabilization.

The CH2 domain is a critical element of the human Immunoglobulin G (IgG) constant region. Although the CH2 domain is the least stable domain in IgG, it is also a promising scaffold candidate for developing novel therapeutic approaches. Recently, we succeeded in preparing glycosylated and non-glycosylated CH2 domain in the host organism Pichia pastoris. Herein, we verified that glycosylation of the CH2 domain decreased both, its tendency to aggregate and its immunogenicity in mice, suggesting that aggregation and immunogenicity are related. In addition, we have produced in P. pastoris a stabilized version of the CH2 domain with and without glycan, and their propensity to aggregate evaluated. We found that stabilization alone significantly decreased the aggregation of the CH2 domain. Moreover, the combination of glycosylation and stabilization completely suppressed its aggregation behavior. Since protein aggregation is related to immunogenicity, the combination of glycosylation and stabilization to eliminate the aggregation behavior of a protein could be a fruitful strategy to generate promising immunoglobulin scaffolds.

High-level expression of human CH2 domain from the Fc region in Pichia pastoris and preparation of anti-CH2 antibodies.

Pichia pastoris is a popular eukaryotic system employed for the fast, simple and inexpensive production of recombinant protein including biotherapeutics such as human albumin. The CH2 domain of human Immunoglobulin G (IgG) is a promising scaffold for developing novel therapeutics. To accelerate the research of CH2 domain, we have established a procedure to highly express human CH2 domain (∼150 mg/l) as well as human Fc (∼30 mg/l) in yeast P. pastoris. The procedure yields, simultaneously, a major glycosylated (∼70%) and non-glycosylated (∼30%) fractions. They can be easily separated with high purity. Although both forms of CH2 domain have essentially the same secondary structure, the presence of the glycan increased the thermal stability of the CH2 domain by about 5°C as determined from calorimetry. The purified glycosylated CH2 domain elicited polyclonal antibodies in mouse, recognizing not only the CH2 domain, but also recombinant human Fc and the commercial IgG1 antibody Rituxan. Protein A and Protein G binding to the kink region between CH2 domain and CH3 domain of human Fc are used to purify therapeutic proteins. Therefore, these antibodies are candidates to develop a novel affinity material to purify human antibodies using their CH2 domain.

Glycosylation decreases aggregation and immunogenicity of adalimumab Fab secreted from Pichia pastoris.

Glycoengineering of therapeutic proteins has been applied to improve the clinical efficacy of several therapeutics. Here, we examined the effect of glycosylation on the properties of the Fab of the therapeutic antibody, adalimumab. An N-glycosylation site was introduced at position 178 of the H chain constant region of adalimumab Fab through site-directed mutagenesis (H:L178N Fab), and the H:L178N Fab was produced in Pichia pastoris. Expressed mutant Fab contained long and short glycan chains (L-glyco Fab and S-glyco Fab, respectively). Under the condition of aggregation of Fab upon pH shift-induced stress, both of L-glyco Fab and S-glyco Fab were less prone to aggregation, with L-glyco Fab suppressing aggregation more effectively than the S-glyco Fab. Moreover, the comparison of the antigenicity of glycosylated and wild-type Fabs in mice revealed that glycosylation resulted in the suppression of antigenicity. Analysis of the pharmacokinetic behaviour of the Fab, L-glyco Fab and S-glyco Fab indicated that the half-lives of glycosylated Fabs in the rats were shorter than that of wild-type Fab, with L-glyco Fab having a shorter half-life than S-glyco Fab. Thus, we demonstrated that the glycan chain influences Fab aggregation and immunogenicity, and glycosylation reduces the elimination half-life in vivo.

Crystal structure of the complex of the interaction domains of Escherichia coli DnaB helicase and DnaC helicase loader: structural basis implying a distortion-accumulation mechanism for the DnaB ring opening caused by DnaC binding.

Loading the bacterial replicative helicase DnaB onto DNA requires a specific loader protein, DnaC/DnaI, which creates the loading-competent state by opening the DnaB hexameric ring. To understand the molecular mechanism by which DnaC/DnaI opens the DnaB ring, we solved 3.1-Å co-crystal structure of the interaction domains of Escherichia coli DnaB-DnaC. The structure reveals that one N-terminal domain (NTD) of DnaC interacts with both the linker helix of a DnaB molecule and the C-terminal domain (CTD) of the adjacent DnaB molecule by forming a three α-helix bundle, which fixes the relative orientation of the two adjacent DnaB CTDs. The importance of the intermolecular interface in the crystal structure was supported by the mutational data of DnaB and DnaC. Based on the crystal structure and other available information on DnaB-DnaC structures, we constructed a molecular model of the hexameric DnaB CTDs bound by six DnaC NTDs. This model suggested that the binding of a DnaC would cause a distortion in the hexameric ring of DnaB. This distortion of the DnaB ring might accumulate by the binding of up to six DnaC molecules, resulting in the DnaB ring to open.

C-Terminal Cysteine PEGylation of Adalimumab Fab with an Engineered Interchain SS Bond.

Conjugation with polyethylene glycol (PEG) is performed to increase serum half-life of the Fab for clinical applications. However, current designs for recombinant Fab only allow PEGylation at the interchain SS bond (disulfide bond) at the C-terminal end of the heavy chain and light chain of the Fab, which the decrease of thermostability occurred by partial reduction of the interchain SS bond. An adalimumab Fab mutant with a novel interchain SS bond (CH1 : C177-CL : C160) and one cysteine at the C-terminal end (mutSS FabSH) was designed to maintain Fab thermostability and for site-specific PEGylation. MutSS FabSH was expressed in Pichia pastoris and purified mutSS FabSH was conjugated with 20-kDa PEG targeted at the free cysteine. Based on enzyme-linked immunosorbent assay (ELISA), PEGylation did not affect the binding capacity of the mutSS FabSH. To confirm the influence of PEGylation on the pharmacokinetic behavior of the Fab, PEGylated mutSS FabSH was administered to rats via tail vein injection. Analysis of the mean serum concentration of the PEGylated mutSS FabSH versus time through ELISA indicated an increase in half-life compared to that of non-PEGylated wild-type Fab. Consequently, we have successfully demonstrated that a Fab mutant with a novel interchain SS bond and one free cysteine at the C-terminal end can be PEGylated without changes in functionality. This design can potentially be used as a platform for modification of other recombinant Fabs.

A method to induce hen egg lysozyme-specific humoral immune tolerance in mice by pre-exposition with the protein's oligomers.

During treatment with protein therapeutics, such as monoclonal antibodies, the development of anti-drug antibodies is a serious side-effect of modern pharmacology. Anti-drug antibodies are produced as the number and exposure to therapeutic proteins increase. In this context, less immunogenic responses could diminish these noxious effects. Biophysical characterization of antigens, that is size, chemical composition, physical form, and degrability, are known to influence the outcome of immune responses. Here, using chemical modification, we have prepared oligomers of hen egg lysozyme (HEL), 3- to 5-mer, as a typical antigen in immunology and evaluated the efficacy as a tolerogen in HEL-specific antibody responses. Our results clearly demonstrated that pre-exposed the HEL-oligomers into mice effectively suppressed HEL-specific IgG responses regardless of the cross-linking mode. Therefore, the oligomerization is a method to induce tolerogenicity of proteins and may emerge as a promising strategy to control the production of undesirable anti-protein drug antibodies.

Introduction of a glycosylation site in the constant region decreases the aggregation of adalimumab Fab.

The production of therapeutic monoclonal antibodies is costly; therefore, antigen-binding fragments (Fabs) can be used instead. However, their tendency toward aggregation can reduce the half-life in the plasma and the therapeutic effectiveness. To examine the effect of glycosylation on the properties of the Fab of a therapeutic antibody, an N-glycosylation site was introduced at position 178 of the H-chain constant region of adalimumab Fab through site-directed mutagenesis of L178 N (H:L178 N Fab), and then H:L178 N Fab was expressed in Pichia pastoris. SDS-PAGE analysis with treatment of N-glycosidase F or periodic acid-Schiff reagent showed that H:L178 N Fab contained a relatively low glycan level. Moreover, the H:L178 N mutation did not decrease the binding activity and thermal stability of Fab, and H:L178 N Fab was more resistant to protease digestion than wild-type Fab. The aggregation of Fab induced by pH-shift stress was measured by monitoring the optical density at 350 nm. Although the wild-type Fab showed a large increase in optical density with an increase of protein concentration, no such increase of turbidity during aggregation was found in H:L178 N Fab. These results demonstrated that glycosylation at position 178 of the H-chain constant region of adalimumab Fab can prevent protein aggregation, and therefore serve as a potentially effective platform for drug development.

A novel engineered interchain disulfide bond in the constant region enhances the thermostability of adalimumab Fab.

We constructed a system for expressing the Fab of the therapeutic human monoclonal antibody adalimumab at a yield of 20 mg/L in the methylotrophic yeast Pichia pastoris. To examine the contribution of interchain disulfide bonds to conformational stability, we prepared adalimumab Fab from which the interchain disulfide bond at the C-terminal region at both the CH1 and CL domains was deleted by substitution of Cys with Ala (FabΔSS). DSC measurements showed that the Tm values of FabΔSS were approximately 5 °C lower than those of wild-type Fab, suggesting that the interchain disulfide bond contributes to conformational thermostability. Using computer simulations, we designed a novel interchain disulfide bond outside the C-terminal region to increase the stability of FabΔSS. The resulting Fab (mutSS FabΔSS) had the mutations H:V177C and L:Q160C in FabΔSS, confirming the formation of the disulfide bond between CH1 and CL. The thermostability of mutSS FabΔSS was approximately 5 °C higher than that of FabΔSS. Therefore, the introduction of the designed interchain disulfide bond enhanced the thermostability of FabΔSS and mitigated the destabilization caused by partial reduction of the interchain disulfide bond at the C-terminal region, which occurs in site-specific modification such as PEGylation.

Relationship between the magnitude of IgE production in mice and conformational stability of the house dust mite allergen, Der p 2.

BACKGROUND: Protein antigens are degraded by endosomal protease in antigen presentation cell. T cells recognize peptides derived from antigen proteins bound to class II major histocompatibility complex molecules. We previously reported that an increase in the conformational stability of an antigen depressed its immunogenicity. However, there is little information on antigens with differences in molecular properties such as net charges and molecular weight. METHODS: Denaturation experiments against guanidine hydrochloride. The serum IgE levels to protein antigens at 35days after the first immunization analyzed using ELISA. RESULTS: The Der p 2 mutations in which Ile13 is mutated to Ala (I13A) and Ala122 is mutated to Ile (A122I) were shown to have lower and higher conformational stability than the wild-type, respectively, by denaturation experiments. The amount of IgE production by the less stable I13A mutant was higher and that of the stable A122I mutant was lower than that of the wild-type. CONCLUSION: Our results suggest that the increased conformational stability of Der p 2 depressed the IgE production in mice. GENERAL SIGNIFICANCE: These findings should provide a milestone for the engineering of allergen vaccines.

Role of the osmolyte taurine on the folding of a model protein, hen egg white lysozyme, under a crowding condition.

Taurine is one of the osmolytes that maintain the structure of proteins in cells exposed to denaturing environmental stressors. Recently, cryoelectron tomographic analysis of eukaryotic cells has revealed that their cytoplasms are crowded with proteins. Such crowding conditions would be expected to hinder the efficient folding of nascent polypeptide chains. Therefore, we examined the role of taurine on the folding of denatured and reduced lysozyme, as a model protein, under a crowding condition. The results confirmed that taurine had a better effect on protein folding than did ß-alanine, which has a similar chemical structure, when the protein to be folded was present at submillimolar concentration. NMR analyses further revealed that under the crowding condition, taurine had more interactions than did ß-alanine with the lysozyme molecule in both the folded and denatured states. We concluded that taurine improves the folding of the reduced lysozyme at submillimolar concentration to allow it to interact more favorably with the lysozyme molecule. Thus, the role of taurine, as an osmolyte in vivo, may be to assist in the efficient folding of proteins.

Epithelium specific ETS transcription factor, ESE-3, of Protobothrops flavoviridis snake venom gland transactivates the promoters of venom phospholipase A2 isozyme genes.

Protobothrops flavoviridis (habu) (Crotalinae, Viperidae) is a Japanese venomous snake, and its venom contains the enzymes with a variety of physiological activities. The phospholipases A2 (PLA2s) are the major components and exert various toxic effects. They are expressed abundantly in the venom gland. It is thought that the venom gland-specific transcription factors play a key role for activation of PLA2 genes specifically expressed in the venom gland. Thus, the full-length cDNA library for P. flavoviridis venom gland after milking of the venom was made to explore the transcription factors therein. As a result, three cDNAs encoding epithelium-specific ETS transcription factors (ESE)-1, -2, and -3 were obtained. Among them, ESE-3 was specifically expressed in the venom gland and activated the proximal promoters of venom PLA2 genes, which are possibly regarded as the representatives of the venom gland-specific protein genes in P. flavoviridis. Interestingly, the binding specificity of ESE-3 to the ETS binding motif located near TATA box is well correlated with transcriptional activities for the venom PLA2 genes. This is the first report that venom gland-specific transcription factor could actually activate the promoters of the venom protein genes.

Domain separation and characterization of PriC, a replication restart primosome factor in Escherichia coli.

In Escherichia coli the oriC-independent primosome plays an essential role in replication restart after dissociation of the replication DNA-protein complex by DNA damage. Primosome is thought to form via two pathways: one PriA dependent and the other PriA independent. PriC is a key protein in the replication restart of the PriA-independent pathway. In this study, we determined that PriC was divided into two domains. Then, we obtained information that: (i) the C-terminal domain preferentially binds to single-stranded DNA (ssDNA); (ii) the binding of PriC to ssDNA depends on salt concentration; and (iii) the binding site size of PriC is approximately 7-9 nucleotides. The protease digestion of PriC suggested that a possible DNA-binding site is the N-terminus of the C-terminal domain where basic amino acid residues are concentrated. Interestingly, α-helical induction of the C-terminal domain of PriC occurred after the addition of DNAs. Also, we examined the role of heptad repeat of leucine or valine residues in the C-terminal domain and PriC oligomerization. This study describes the structure and function analysis of PriC which forms the primosome complex in replication restart.

Characterization of deamidation at Asn138 in L-chain of recombinant humanized Fab expressed from Pichia pastoris.

A method was previously established for evaluating Asn deamidation by matrix-assisted laser desorption/ionization time of flight-mass spectrometry using endoproteinase Asp-N. In this study, we demonstrated that this method could be applied to the identification of the deamidation site of the humanized fragment antigen-binding (Fab). First, a system for expressing humanized Fab from methylotrophic yeast Pichia pastoris was constructed, resulting in the preparation of ∼30 mg of the purified humanized Fab from 1 l culture. Analysis of the L-chain derived from recombinant humanized Fab that was heated at pH 7 and 100°C for 1 h showed the deamidation at Asn138 in the constant region. Then, we prepared L-N138D Fab and L-N138A Fab and examined their properties. The circular dichroism (CD) spectrum of the L-N138D Fab was partially different from that of the wild-type Fab. The measurement of the thermostability showed that L-N138D caused a significant decrease in the thermostability of Fab. On the other hand, the CD spectrum and thermostability of L-N138A Fab showed the same behaviour as the wild-type Fab. Thus, it was suggested that the introduction of a negative charge at position 138 in the L-chain by the deamidation significantly affected the stability of humanized Fab.

Mechanism for retardation of amyloid fibril formation by sugars in Vλ6 protein.

Sugars, which function as osmolytes within cells, retard the amyloid fibril formation of the amyloidosis peptides and proteins. To examine the mechanism of this retardation in detail, we analyzed the effect of sugars (trehalose, sucrose, and glucose) on the polypeptide chains in 3Hmut Wil, which is formed by the mutation of three His residues in Wil mutant as a cause of amyloid light-chain (AL) amyloidosis, at pH 2, a pH condition under which 3Hmut Wil was almost denatured. Sugars caused the folding of 3Hmut Wil so that its polypeptide chains adopted a native-like rather than a denatured conformation, as suggested by tryptophan fluorescence, CD spectroscopy, and heteronuclear NMR. Furthermore, these sugars promoted the folding to a native-like conformation according to the effect of preferential hydration rather than direct interaction. However, the type of sugar had no effect on the elongation of amyloid fibrils. Therefore, it was concluded that sugar affected the thermodynamic stability of 3Hmut Wil but not the elongation of amyloid fibrils.

Preparation and characterization of a monoclonal antibody against the refolded and functional extracellular domain of rat P2X4 receptor.

The P2X4 purinergic receptor is a key molecule in neuropathic pain, particularly in the allodynia after peripheral nerve injury. We therefore sought to establish an anti-P2X4 receptor monoclonal antibody that would be useful for detection and characterization of the P2X4 receptor. We first prepared the refolded extracellular domain of the rat P2X4 receptor expressed in Escherichia coli. Then, we established a B-cell hybridoma producing the monoclonal antibody for the head domain of the rat P2X4 receptor with strict recognition, including S-S bond formation. In addition, we succeeded in the detection and immune precipitation of rat P2X4 receptor molecules on cultured cells. As the antibody specifically binds to the rat P2X4 receptor molecule, it is expected that the established monoclonal antibody will be applicable as a tool for detecting increasing expression levels of the P2X4 receptor molecule accompanied with increasing intensity of neuropathic pain.