The role of multi-walled carbon nanotubes in enhancing the hydrolysis and thermal stability of PLA.

Polylactic acid (PLA) is a bioresorbable and biodegradable polymer extensively used in various biomedical and engineering applications. In this study, we investigated the mass loss and thermal properties of PLA-multi-walled carbon nanotube (MWCNT) composites under simulated physiological conditions. The composites were prepared by melting PLA with 0.1, 0.5, 1.0, and 5.0 wt% MWCNTs using an ultrasonic agitator, and FTIR analysis confirmed composite formation. Subsequently, the composites were subjected to hydrolysis under simulated physiological conditions (pH 7.4 and 37 °C) for up to 60 days. The results revealed that the mass loss of the composites decreased with increasing MWCNT content, suggesting that the presence of MWCNTs decelerated the hydrolysis process. On day 58, the mass loss of pure PLA was 12.5%, decreasing to 8.34% with 0.1% MWCNT, 5.94% with 0.5% MWCNT, 4.59% with 1% MWCNT, and 3.54% with 5.0% MWCNT. This study offers valuable insights into the behavior of PLA-MWCNT composites under physiologically simulated conditions, facilitating the development of new polymer composites with enhanced thermal stability and degradation resistance for biomedical applications.

Mucoadhesive polymeric systems for vaginal drug delivery: a systemic review / Sistemas poliméricos mucoadhesivos para la liberación vaginal de fármacos: revisión sistemática

ABSTRACT Intravaginal drug administration has many advantages in comparison to other delivery routes: its local and systemic effect, lower dosages, and easiness of administration. Furthermore, makes it a reliable and comfortable way of therapy. This route can be used to prevent and treat a wide range of conditions including, sexually transmitted infections (STIs), hormonal treatment, birth control, and cancer treatment. The dosage forms may vary from ovules, tablets, rings, gels, creams, films and many more; lately adding the mucoadhesiveness to the characteristics to reduce the waste of active molecules. This review focuses on the way mucoadhesive polymeric systems have been applied in vaginal delivery. This review presents a bibliographical compilation of results from various investigations published in scientific databases: Science Direct, SciELO, and PubMed Central. Results compiled demonstrate that the intravaginal drug administration can be an alternative form of medication for women with more stable and prolonged results than traditional routes requiring lower doses and avoiding the first-pass effect.

RESUMEN La administración de fármacos por vía intravaginal cuenta con múltiples ventajas a comparación de otras rutas, puede lograr un efecto tanto local como sistémico, las dosis requeridas son menores, facilidad de administración entre otras, hacen que esta forma de administración sea confiable y cómoda. Esta vía de administración puede ser empleada para prevenir y tratar diferentes trastornos, como enfermedades de transmisión sexual, desordenes hormonales, anticonceptivos y tratamiento contra el cáncer. La presentación de las dosis puede variar, desde óvulos, tabletas, anillos, geles, cremas, películas entre otros, agregando a esta, en los últimos tiempos, la característica de mucoadhesividad para reducir el desecho de moléculas activas. Este trabajo se enfoca en las aplicaciones que han tenido los sistemas poliméricos mucoadhesivos en la vía intravaginal. La bibliografía recolectada se obtuvo de bases de datos como Science direct, SciELO, y PubMed Central. Los resultados obtenidos demuestran que la administración de fármacos por vía intravaginal puede ser una forma alternativa para medicación en mujeres, con resultados más estables y prolongados que otras rutas, requiriendo menores dosis y evitando el efecto de primer paso.

Comparative Study of the Antibacterial, Biodegradable, and Biocompatibility Properties of Composite and Bi-Layer Films of Chitosan/Gelatin Coated with Silver Particles.

The dressings are materials that can improve the wound-healing process in patients with medical issues. Polymeric films are frequently used as dressings with multiple biological properties. Chitosan and gelatin are the most used polymers in tissue regeneration processes. There are usually several configurations of films for dressings, among which the composite (mixture of two or more materials) and layered ones stand out (layers). This study analyzed the antibacterial, degradable, and biocompatible properties of chitosan and gelatin films in 2 configurations, composite and bilayer, composite. In addition, a silver coating was added to enhance the antibacterial properties of both configurations. After the study, it was found that the bilayer films have a higher antibacterial activity than the composite films, having inhibition halos between 23% and 78% in Gram-negative bacteria. In addition, the bilayer films increased the fibroblast cell proliferation process, reaching up to 192% cell viability after 48 h of incubation. On the other hand, composite films have greater stability since they are thicker, with 276 µm, 243.8 µm, and 239 µm compared to 236 µm, 233 µm, and 219 µm thick for bilayer films; and a low degradation rate compared to bilayer films.

Lipid nanoparticles for gene therapy in ocular diseases.

OBJECTIVES: Lipid nanoparticles, as a nucleic acid delivery system, have been used as an alternative to treat ocular diseases, since they can cross the ocular barrier and efficiently transfecting nucleic acids to various cells of the eye. The size influences the transfection of genes, biological distribution, diffusion, and cellular uptake. It is therefore important to establish a relationship between size, formulation, and encapsulation percentage. EVIDENCE ACQUISITION: In this review, we used a search strategy to compare studies of nanomedicine systems aimed at eye diseases where the size of the nanoparticles and the efficiency of encapsulation of genetic material are reported based on the criteria of Preferred Reporting Items for Systematic Reviews (PRISMA ScR 2020 guidelines). RESULTS: Out of the initial 5932, 169 studies met the inclusion criteria and were included to form the basis of the analysis. Nanoparticles reported are composed mainly of PEG-modified lipids, cholesterol, and cationic lipids, that in combination with messenger or interference RNA, allow the formulation of a nanoparticle with an encapsulation efficiency greater than 95%. The diseases treated mainly focus on conditions related to the retina and cornea. Certain characteristics of nanoparticles increase encapsulation efficiency, such as the size of the nanoparticle and the charge of the outer layer of the nanoparticle. CONCLUSION: It is still unknown what characteristics lipid nanoparticles should have to successfully treat human eye illnesses. The in vitro and in vivo investigations covered in this review, however, present encouraging results. To improve encapsulation effectiveness and disease gene silencing, nanoparticle formulation is essential. The most stable nanoparticles are those made mostly of cationic lipids, PEG lipids, and cholesterol, which also effectively encapsulate RNA. The encapsulation efficiency is not only influenced by size, but also by other factors such as methods of preparation.

O-carboxymethyl chitosan/gelatin/silver-copper hydroxyapatite composite films with enhanced antibacterial and wound healing properties.

Wound dressing composite films of O-carboxymethyl chitosan (OCMC) and gelatin were prepared and mixed with hydroxyapatite (HA) composited with Silver (Ag) and Copper (Cu) at different concentrations. The chemical, thermal, morphological, and biological properties of the composite films were studied. The analysis by FTIR confirmed the presence of interactions between gelatin and OCMC, and at the same time, the polymer matrix interactions with Ag-Cu/HA complex. The inclusion of nanoparticle to the composite was associated with an improvement of the thermal stability, morphological roughness, a 9-12% more hydrophobic behavior (composite C1, C5, and C8), increase in antibacterial activity from 23.2 to 33.1% for gram negative bacteria and from 37.28 to 40.59% for gram positive bacteria, and with a cell viability greater than 100% for 24 and 72 h. The films obtained can serve as a wound healing dressing and regenerating biomaterial.

Synergistic Interactions between Tocol and Phenolic Extracts from Different Tree Nut Species against Human Cancer Cell Lines.

Tree nuts are rich in polar (phenolic compounds) and non-polar (tocols) antioxidants, with recognized effects in the prevention of diseases such as cancer. These biomolecules possess antiproliferative activity on cancer cells; however, the combined effect of both types of compounds has been scarcely studied, and this approach could give valuable information on the real anticancer potential of tree nuts. In the present study, the antiproliferative activity of pure tocols and phenolic compounds, tocol- and phenolic-rich extracts (TRE and PRE, respectively) from tree nuts and the extracts combinations, was evaluated in four cancer (HeLa, MCF7, PC3, A549) and one control (ARPE) cell lines. The most sensible cell lines were HeLa and MCF7. TRE and PRE from nuts were chemically characterized; γ and δ tocopherols, total tocols, total tocopherols and total phenolic compounds were negatively correlated with cell viability in MCF7 cells. In HeLa cells, only δ and total tocopherols were negatively correlated with cell viability. TRE and PRE had a low effect in reducing cell viability of the cancer cell lines, the most effective extracts were those of emory oak acorn (EOA), pecan nut (PEC) and walnut (WAL), and these were further studied for their pharmacological interactions, using the combination index and the isobologram methods. Combinations of both extracts showed a synergistic and strongly synergistic behavior in the three nuts (EOA, PEC and WAL), with combination indexes between 0.12 and 0.55. These results highlight the need to understand the interactions among components found in complex natural extracts or food products in order to fully understand their bioactivities.

The effect of Allium cepa extract on the chitosan/PLGA scaffolds bioactivity.

Allium cepa extracts (AC) allow the fabrication of a biomaterial that, together with chitosan and PLGA, could be osteoconductive and promote a better and faster regeneration of bone tissue, with biocompatibility and biomineralization properties. In this work, scaffolds were developed by the thermally induced phase separation (TIPS) technique. An in vitro bioactivity analysis was performed using simulated body fluid (SBF). Scanning electron microscopy (SEM), energy dispersion spectroscopy, and infrared spectroscopy were used for the scaffolds characterization. The results showed a structure with a pore size distribution between 50 and 100 µm, which allowed the uniform formation of biological apatite crystals on the surface of the scaffolds. The chitosan/policaprolactone/Allium cepa scaffold (ChPAC) showed the most promising results with a ratio of P/Ca between 1.6 and 1.7, a value very close to that of hydroxyapatite.

Chitosan/Mimosa tenuiflora films as potential cellular patch for skin regeneration.

Bio-composites films were prepared by casting and drying of aqueous solutions containing different weight ratios of chitosan and bark of Mimosa tenuiflora. The physico-chemical and functional properties of the films were characterized by scanning electron microscopy, dynamical mechanical analysis, wettability, cytotoxicity and in vitro antibacterial activities. The morphology studies confirmed that the presence of Mimosa tenuiflora change the surface of films. Moreover, the incorporation of Mimosa tenuiflora improved the thermal stability of the films, as it was indicated by the changes in the glass temperatures obtained. Water-uptake ability changed in relation to polymeric composition of film. This property increased by the addition of Mimosa tenuiflora to the film. Improved antibacterial properties were measured against Escherichia Coli and Micrococcus lysodeikticus or luteus. Finally, cytotoxicity was studied by MTT assay and the films were non-toxic. These preliminary results provide a cheap way to prepare chitosan/Mimosa tenuiflora films for wound healing and skin regeneration.