Bionanocomposite films based on polysaccharides from banana peels.

Pectin and cellulose nanocrystals (CNCs) isolated from banana peels were used to prepare films. The effects of a reinforcing phase (CNCs) and a crosslinker (citric acid, CA) on properties of pectin films were studied. Glycerol-plasticized films were prepared by casting, with different CNC contents (0-10wt%), with or without CA. Overall tensile properties were improved by intermediate CNC contents (around 5wt%). The water resistance and water vapor barrier properties were also enhanced by CNC. Evidences were found from Fourier Transform Infrared (FTIR) spectra supporting the occurrence of crosslinking by CA. Additionally, the tensile strength, water resistance and barrier to water vapor were improved by the presence of CA. The 13C ssNMR spectra indicated that both CA and CNC promoted stiffening of the polymer chains.

Pectin extraction from pomegranate peels with citric acid.

Pectins were extracted from pomegranate peels with citric acid, according to a central composite design with three variables: pH (2-4), temperature (70-90°C), and extraction time (40-150min). Fourier transform infrared (FTIR) spectroscopy was used to follow changes in material composition during the main steps of pectin extraction, and also to determine the degree of methyl esterification and galacturonic acid content of pectins produced under different conditions. Harsh conditions enhanced the extraction yield and the galacturonic acid contents, but decreased the degree of methoxylation. The optimum extraction conditions, defined as those predicted to result in a yield of galacturonic acid higher than 8g/100g while keeping a minimum degree of methoxylation of 54% were: 88°C, 120min, pH 2.5. Close agreement was found between experimental and predicted values at the extraction conditions defined as optimum.

Pomegranate peel pectin films as affected by montmorillonite.

The industrial production of pomegranate juice has been favored by its alleged health benefits derived from its antioxidant properties. The processing of pomegranate juice involves squeezing juice from the fruit with the seeds and the peels together, leaving a pomace consisting of approximately 73 wt% peels. In this study, pectin was extracted from pomegranate peels, and used to produce films with different contents of montmorillonite (MMT) as a nanoreinforcement material. The nanoreinforcement improved the tensile strength and modulus of films when added at up to 6 wt%, while the further addition of MMT (to 8 wt%) reduced the reinforcement effect, probably because of dispersion problems. The elongation was decreased with increasing MMT concentrations. The water vapor permeability decreased with increasing MMT contents up to 8 wt% MMT, indicating that the increased tortuosity of the permeant path was effective on barrier properties of the film.

Optimization of pectin extraction from banana peels with citric acid by using response surface methodology.

A central composite design was used to determine effects of pH (2.0-4.5), extraction temperature (70-90 °C) and time (120-240 min) on the yield, degree of methoxylation (DM) and galacturonic acid content (GA) of pectins extracted from banana peels with citric acid. Changes in composition during the main steps of pectin extraction were followed by Fourier transform infrared (FTIR) spectroscopy. FTIR was also used to determine DM and GA of pectins. Harsh temperature and pH conditions enhanced the extraction yield, but decreased DM. GA presented a maximum value at 83 °C, 190 min, and pH 2.7. The yield of galacturonic acid (YGA), which took into account both the extraction yield and the pectin purity, was improved by higher temperature and lower pH values. The optimum extraction conditions, defined as those resulting in a maximum YGA while keeping DM at a minimum of 51%, were: 87 °C, 160 min, pH 2.0.