Sustainable whey proteins-nanostructured zinc oxide-based films for the treatment of chronic wounds: New insights from biopharmaceutical studies.

Chronic wounds represent silent epidemic affecting a large portion of the world population, especially the elders; in this context, the development of advanced bioactive dressings is imperative to accelerate wound healing process, while contrasting or preventing infections. The aim of the present work was to provide a deep characterization of the functional and biopharmaceutical properties of a sustainable thin and flexible films, composed of whey proteins alone (WPI) and added with nanostructured zinc oxide (WPZ) and intended for the management of chronic wounds. The potential of whey proteins-based films as wound dressings has been confirmed by their wettability, hydration properties, elastic behavior upon hydration, biodegradation propensity and, when added with nanostructured zinc oxide, antibacterial efficacy against both Gram-positive and Gram-negative pathogens, i.e. Staphylococcus aureus and Escherichia coli. In-vitro experiments, performed on normal human dermal fibroblasts, confirmed film cytocompatibility, also revealing the possible role of Zn2+ ions in promoting fibroblast proliferation. Finally, in-vivo studies on rat model confirmed film suitability to act as wound dressing, since able to ensure a regular healing process while providing effective protection from infections. In particular, both films WPI and WPZ are responsible for the formation in the wound bed of a continuous collagen layer similar to that of healthy skin.

Silica-Cyclodextrin Hybrid Materials: Two Possible Synthesis Processes.

Both cyclodextrin (CD) and porous silica possess interesting properties of adsorption and release. A silica-CD hybrid, therefore, could synergically merge the properties of the two components, giving rise to a material with appealing properties for both environmental and pharmaceutical applications. With this aim, in the present study, a first hybrid is obtained through one-pot sol-gel synthesis starting from CD and tetramethyl orthosilicate (TMOS) as a silica precursor. In particular, methyl-ß-cyclodextrin (bMCD) is selected for this purpose. The obtained bMCD-silica hybrid is a dense material containing a considerable amount of bMCD (45 wt.%) in amorphous form and therefore represents a promising support. However, since a high specific surface area is desirable to increase the release/adsorption properties, an attempt is made to produce the hybrid material in the form of an aerogel. Both the synthesis of the gel and its drying in supercritical CO2 are optimized in order to reach this goal. All the obtained samples are characterized in terms of their physico-chemical properties (infra-red spectroscopy, thermogravimetry) and structure (X-ray diffraction, electron microscopy) in order to investigate their composition and the interaction between the organic component (bMCD) and the inorganic one (silica).

Antimicrobial Nano-Zinc Oxide Biocomposites for Wound Healing Applications: A Review.

Chronic wounds are a major concern for global health, affecting millions of individuals worldwide. As their occurrence is correlated with age and age-related comorbidities, their incidence in the population is set to increase in the forthcoming years. This burden is further worsened by the rise of antimicrobial resistance (AMR), which causes wound infections that are increasingly hard to treat with current antibiotics. Antimicrobial bionanocomposites are an emerging class of materials that combine the biocompatibility and tissue-mimicking properties of biomacromolecules with the antimicrobial activity of metal or metal oxide nanoparticles. Among these nanostructured agents, zinc oxide (ZnO) is one of the most promising for its microbicidal effects and its anti-inflammatory properties, and as a source of essential zinc ions. This review analyses the most recent developments in the field of nano-ZnO-bionanocomposite (nZnO-BNC) materials-mainly in the form of films, but also hydrogel or electrospun bandages-from the different preparation techniques to their properties and antibacterial and wound-healing performances. The effect of nanostructured ZnO on the mechanical, water and gas barrier, swelling, optical, thermal, water affinity, and drug-release properties are examined and linked to the preparation methods. Antimicrobial assays over a wide range of bacterial strains are extensively surveyed, and wound-healing studies are finally considered to provide a comprehensive assessment framework. While early results are promising, a systematic and standardised testing procedure for the comparison of antibacterial properties is still lacking, partly because of a not-yet fully understood antimicrobial mechanism. This work, therefore, allowed, on one hand, the determination of the best strategies for the design, engineering, and application of n-ZnO-BNC, and, on the other hand, the identification of the current challenges and opportunities for future research.

The Role of the pH in the Impregnation of Spherical Mesoporous Silica Particles with L-Arginine Aqueous Solutions.

In the context of the development of carriers for amino acids delivery, Spherical Mesoporous Silica Particles (SMSP), characterized by particles size ranging from 0.15 µm to 0.80 µm and average pore diameter of 2.4 nm, were synthesised and loaded with L-arginine (ARG), a basic amino acid involved in several physiological processes. The loading was performed using water as a solvent through the wet impregnation method (with a final arginine content of 9.1% w/w). The material was characterized before and after impregnation by means of X-Ray Diffraction (XRD), nitrogen sorption analysis, Field Emission Scanning Electron Microscopy (FESEM) and Fourier Transform Infrared (FT-IR) spectroscopy. SMSP are shown to suffer degradation upon impregnation, which dramatically affects their porosity. To elucidate the role of the pH of the ARG impregnating solution (originally set at pH ≈ 11) on SMSP degradation, the loading was performed under different pH conditions (5 and 9) keeping constant the ARG concentration. The impregnation performed with acidic solution did not modify the carrier. All samples displayed ARG in amorphous form: zwitterionic species were present in SMSP impregnated at basic pH whereas positive protonated species in that impregnated at acidic pH.

Whey Proteins-Zinc Oxide Bionanocomposite as Antibacterial Films.

The use of toxic crosslinking agents and reagents in the fabrication of hydrogels is a frequent issue which is particularly concerning for biomedical or food packaging applications. In this study, novel antibacterial bionanocomposite films were obtained through a simple solvent casting technique without using any crosslinking substance. Films were made from a flexible and transparent whey protein matrix containing zinc oxide nanoparticles synthesised via a wet chemical precipitation route. The physicochemical and functional properties of the ZnO nanoparticles and of the composite films were characterised, and their antibacterial activity was tested against S. epidermidis and E. coli. The synthesised ZnO nanoparticles had an average size of about 30 nm and a specific surface area of 49.5 m2/g. The swelling ratio of the bionanocomposite films increased at basic pH, which is an appealing feature in relation to the absorption of chronic wound exudate. A n-ZnO concentration-dependent antibacterial effect was observed for composite films. In particular, marked antibacterial activity was observed against S. epidermidis. Overall, these findings suggest that this novel material can be a promising and sustainable alternative in the design of advanced solutions for wound dressing or food packaging.

Amino groups modified SBA-15 for dispersive-solid phase extraction in the analysis of micropollutants by QuEchERS approach.

In the analysis of contaminants in food products, sample preparation is performed by proper adsorbents, whose choice is crucial to eliminate matrix interference. In this work we modified SBA-15 adsorbents by functionalization with (3-aminopropyl)-triethoxysilane (SBA-15-APTES) and N-[3-(trimethoxysilyl)propyl]aniline (SBA-15-AN) aiming to use them for the first time in the clean-up step of a QuEChERS (quick, easy, cheap, effective, rugged and safe) extraction of micropollutants from strawberry, a sugar rich fruit. After physico-chemical characterization by nitrogen adsorption, infrared spectroscopy and thermogravimetric analysis, the adsorption capabilities of SBA-15 sorbents and possible interaction mechanisms were studied at different pH (2.1-8.5) for glucose, sucrose and fructose at concentrations characteristic of those found in strawberries. The performance of the two SBA-15 sorbents was compared with that of commercial PSA (primary secondary amine), usually proposed in QuEChERS protocols. Both SBA-15 materials exhibit up to 30% higher adsorption than PSA, suggesting their possible QuEChERS application. Synthesized SBA-15 adsorbents were hence used as innovative dispersive sorbents in the QuEChERS extractions of 13 PAHs and 14 PCBs from strawberry. For PCBs, SBA-15-AN provides better matrix removal than PSA and comparable extraction recoveries around 90%. For PAHs, the use of SBA-15-AN has the advantage of lower relative standard deviation (7%) than PSA (19%).

Piroxicam Loading onto Mesoporous Silicas by Supercritical CO2 Impregnation.

Piroxicam (PRX) is a commonly prescribed nonsteroidal anti-inflammatory drug. Its efficacy, however, is partially limited by its low water solubility. In recent years, different studies have tackled this problem and have suggested delivering PRX through solid dispersions. All these strategies, however, involve the use of potentially harmful solvents for the loading procedure. Since piroxicam is soluble in supercritical CO2 (scCO2), the present study aims, for the first time, to adsorb PRX onto mesoporous silica using scCO2, which is known to be a safer and greener technique compared to the organic solvent-based ones. For comparison, PRX is also loaded by adsorption from solution and incipient wetness impregnation using ethanol as solvent. Two different commercial mesoporous silicas are used (SBA-15 and Grace Syloid® XDP), which differ in porosity order and surface silanol population. Physico-chemical analyses show that the most promising results are obtained through scCO2, which yields the amorphization of PRX, whereas some crystallization occurs in the case of adsorption from solution and IWI. The highest loading of PRX by scCO2 is obtained in SBA-15 (15 wt.%), where molecule distribution appears homogeneous, with very limited pore blocking.

Understanding Selectivity of Mesoporous Silica-Grafted Diglycolamide-Type Ligands in the Solid-Phase Extraction of Rare Earths.

Rare earth elements (REEs) and their compounds are essential for rapidly developing modern technologies. These materials are especially critical in the area of green/sustainable energy; however, only very high-purity fractions are appropriate for these applications. Yet, achieving efficient REE separation and purification in an economically and environmentally effective way remains a challenge. Moreover, current extraction technologies often generate large amounts of undesirable wastes. In that perspective, the development of selective, reusable, and extremely efficient sorbents is needed. Among numerous ligands used in the liquid-liquid extraction (LLE) process, the diglycolamide-based (DGA) ligands play a leading role. Although these ligands display notable extraction performance in the liquid phase, their extractive chemistry is not widely studied when such ligands are tethered to a solid support. A detailed understanding of the relationship between chemical structure and function (i.e., extraction selectivity) at the molecular level is still missing although it is a key factor for the development of advanced sorbents with tailored selectivity. Herein, a series of functionalized mesoporous silica (KIT-6) solid phases were investigated as sorbents for the selective extraction of REEs. To better understand the extraction behavior of these sorbents, different spectroscopic techniques (solid-state NMR, X-ray photoelectron spectroscopy, XPS, and Fourier transform infrared spectroscopy, FT-IR) were implemented. The obtained spectroscopic results provide useful insights into the chemical environment and reactivity of the chelating ligand anchored on the KIT-6 support. Furthermore, it can be suggested that depending on the extracted metal and/or structure of the ligand and its attachment to KIT-6, different functional groups (i.e., C═O, N-H, or silanols) act as the main adsorption centers and preferentially capture targeted elements, which in turn may be associated with the different selectivity of the synthesized sorbents. Thus, by determining how metals interact with different supports, we aim to better understand the solid-phase extraction process of hybrid (organo)silica sorbents and design better extraction materials.

In Situ Crosslinking Bionanocomposite Hydrogels with Potential for Wound Healing Applications.

In situ forming hydrogels are a class of biomaterials that can fulfil a variety of important biomedically relevant functions and hold promise for the emerging field of patient-specific treatments (e.g., cell therapy, drug delivery). Here we report the results of our investigations on the generation of in situ forming hydrogels with potential for wound healing applications (e.g., complex blast injuries). The combination of polysaccharides that were oxidized to display aldehydes, amine displaying chitosan and nanostructured ZnO yields in situ forming bionanocomposite hydrogels. The physicochemical properties of the components, their cytotoxicity towards HaCat cells and the in vitro release of zinc ions on synthetic skin were studied. The in situ gel formation process was complete within minutes, the components were non-toxic towards HaCat cells at functional levels, Zn2+ was released from the gels, and such materials may facilitate wound healing.

Supercritical Solvent Impregnation of Different Drugs in Mesoporous Nanostructured ZnO.

Supercritical solvent impregnation (SSI) is a green unconventional technique for preparing amorphous drug formulations. A mesoporous nanostructured ZnO (mesoNsZnO) carrier with 8-nm pores, spherical-nanoparticle morphology, and an SSA of 75 m2/g has been synthesized and, for the first time, subjected to SSI with poorly water-soluble drugs. Ibuprofen (IBU), clotrimazole (CTZ), and hydrocortisone (HC) were selected as highly, moderately, and poorly CO2-soluble drugs. Powder X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, nitrogen adsorption analysis, and ethanol extraction coupled with ultraviolet spectroscopy were employed to characterize the samples and quantify drug loading. Successful results were obtained with IBU and CTZ while HC loading was negligible, which could be related to different solubilities in CO2, drug size, and polarity. Successful SSI resulted in amorphous multilayer confinement of the drug. The mesoNsZnO-IBU system showed double drug loading than the mesoNsZnO-CTZ one, with a maximum uptake of 0.24 g/g. Variation of contact time during SSI of the mesoNsZnO-IBU system showed that drug loading triplicated between 3 and 8 h with an additional 30% increment between 8 h and 24 h. SSI did not affect the mesoNsZnO structure, and the presence of the adsorbed drug reduced the chemisorption of CO2 on the carrier surface.

Nanostructured ZnO as Multifunctional Carrier for a Green Antibacterial Drug Delivery System-A Feasibility Study.

The physico⁻chemical and biological properties of nanostructured ZnO are combined with the non-toxic and eco-friendly features of the scCO2-mediated drug loading technique to develop a multifunctional antimicrobial drug delivery system for potential applications in wound healing. Two nanostructured ZnO (NsZnO) with different morphologies were prepared through wet organic-solvent-free processes and characterized by means of powder X-ray diffraction, field emission scanning electron microscopy (FESEM), and nitrogen adsorption analysis. The antimicrobial activity of the two samples against different microbial strains was investigated together with the in vitro Zn2+ release. The results indicated that the two ZnO nanostructures exhibited the following activity: S. aureus > C. albicans > K. pneumoniae. A correlation between the antimicrobial activity, the physico⁻chemical properties (specific surface area and crystal size) and the Zn2+ ion release was found. Ibuprofen was, for the first time, loaded on the NsZnO carriers with a supercritical CO2-mediated drug impregnation process and in vitro dissolution studies of the loaded drug were performed. A successful loading up to 14% w/w of ibuprofen in its amorphous form was obtained. A preliminary drug release test showed that up to 68% of the loaded ibuprofen could be delivered to a biological medium, confirming the feasibility of using NsZnO as a multifunctional antimicrobial drug carrier.

Regenerable, innovative porous silicon-based polymer-derived ceramics for removal of methylene blue and rhodamine B from textile and environmental waters.

The presence of residual color in treated textile wastewater above the regulation limits is still a critical issue in many textile districts. Innovative, polymer-derived ceramics of the Si-C-O system were here synthesized in order to obtain porous nanocomposite materials where a free carbon phase is dispersed into a silicon carbide/silicon oxycarbide network. The sorbents were comprehensively characterized for the removal of two model water-soluble dyes (i.e., the cation methylene blue and the zwitterion rhodamine B). Adsorption is very rapid and controlled by intra-particle and/or film diffusion, depending on dye concentration. Among the nanocomposites studied, the SiOC aerogel (total capacity about 45 mg/g, is easily regenerated under mild treatment (250 °C, 2 h). Adsorption of dyes is not affected by the matrix composition: removals of 150 mg/L methylene blue from river water and simulated textile wastewater with high content of metal ions (2-50 mg/L) and chemical oxygen demand (800 mg/L) were higher than 92% and quantitative for a dye concentration of 1 mg/L.

Fe-Doped Sol-Gel Glasses and Glass-Ceramics for Magnetic Hyperthermia.

This work deals with the synthesis and characterization of novel Fe-containing sol-gel materials obtained by modifying the composition of a binary SiO2-CaO parent glass with the addition of Fe2O3. The effect of different processing conditions (calcination in air vs. argon flowing) on the formation of magnetic crystalline phases was investigated. The produced materials were analyzed from thermal (hot-stage microscopy, differential thermal analysis, and differential thermal calorimetry) and microstructural (X-ray diffraction) viewpoints to assess both the behavior upon heating and the development of crystalline phases. N2 adsorption-desorption measurements allowed determining that these materials have high surface area (40-120 m²/g) and mesoporous texture with mesopore size in the range of 18 to 30 nm. It was assessed that the magnetic properties can actually be tailored by controlling the Fe content and the environmental conditions (oxidant vs. inert atmosphere) during calcination. The glasses and glass-ceramics developed in this work show promise for applications in bone tissue healing which require the use of biocompatible magnetic implants able to elicit therapeutic actions, such as hyperthermia for bone cancer treatment.

Functionalized iron oxide/SBA-15 sorbent: investigation of adsorption performance towards glyphosate herbicide.

Glyphosate is a worldwide-used herbicide occurring in many monitoring campaigns. Efficient technologies are currently unavailable for glyphosate removal from waters. In this work, a SBA-15 mesoporous silica-based material (Fe-NH2-SBA-15) was synthesized and studied for the adsorption of glyphosate from waters. In order to promote specific interactions between the sorbent and glyphosate via phosphoric group, iron oxide nanoparticles were encapsulated and a surface functionalization with (3-aminopropyl)triethoxysilane was accomplished. The adsorption of glyphosate on Fe-NH2-SBA-15 was investigated as a function of (i) pH, (ii) ionic strength (I), and (iii) adsorbate to adsorbent ratio (C), using a two-level, three-factor experimental design. The experimental design allowed for understanding the effect of the abovementioned variables and for proposing experimental conditions for quantitative removal (pH = 2.1, I = 1⋅10-2 M and C = 0.35) under both batch and dynamic conditions. Interaction mechanism between glyphosate and Fe-NH2-SBA-15 sorbent was elucidated by studying the adsorption behavior of sorbents derived from the intermediate stages of synthesis and by desorption tests. Fe-NH2-SBA-15 sorbent can be quantitatively regenerated by 12.5 mM NaOH, and can be reused at least for five adsorption/desorption cycles. Quantitative removal of glyphosate from inlet and effluent wastewaters from a wastewater treatment plant is shown.

Targeted chitosan-based bionanocomposites for controlled oral mucosal delivery of chlorhexidine.

The purpose of this study was to develop sustained release systems based on chitosan (CS) and montmorillonite (MMT) for chlorhexidine (CLX). Nanocomposites were prepared by ion-exchange. CLX systems were characterized by X-ray powder diffraction (XRD), thermal analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray fluorescence analysis (XRF). The mucoadhesion properties of CLX nanocomposites were evaluated by SEM. The release behavior of these systems was also studied by the dialysis technique. The antibacterial activity was investigated in vitro by the disk diffusion test. Results showed long-term sustained release of CLX from the hybrid carriers without initial burst release. The release profiles of CLX from the carriers suggested the diffusion through a swollen matrix and water filled pores as the controlled drug release mechanism. The CLX hybrid nanosystem containing the positively-charged chitosan exhibited good mucoadhesion properties maintaining the CLX antimicrobial properties.

Molecular iodine adsorption within Hofmann-type structures M(L)[M'(CN)4] (M = Ni, Co; M' = Ni, Pd, Pt): impact of their composition.

A series of thermally stable Hofmann-type clathrate structures with the general formula M(pz)[M'(CN)4], where M and M' are bivalent metal ions M(II) = Ni(II), Co(II), M(II)' = Ni(II), Pd(II), Pt(II), and pz is the pyrazine bidentate ligand, was synthesized and investigated for the efficient entrapment of iodine (I2) in solution and in the gas phase. Iodine-containing clathrates thus prepared were analysed to determine the saturation capacity, thermal stability, guest-induced structural changes of the clathrate's lattice and the nature of the confined iodine according to the chemical composition of the host structure. An efficient confinement of about 1 I2 per unit cell is observed for the series of clathrates with the Ni(II) and Pd(II) ions in the square planar position whatever the bivalent metal ion in the octahedral position. Specific responses in the lattice adjustment are detected for Co(II) in the octahedral and Pd(II) in the square planar positions.

Electrophoretic deposition of mesoporous bioactive glass on glass-ceramic foam scaffolds for bone tissue engineering.

In this work, the coating of 3-D foam-like glass-ceramic scaffolds with a bioactive mesoporous glass (MBG) was investigated. The starting scaffolds, based on a non-commercial silicate glass, were fabricated by the polymer sponge replica technique followed by sintering; then, electrophoretic deposition (EPD) was applied to deposit a MBG layer on the scaffold struts. EPD was also compared with other techniques (dipping and direct in situ gelation) and it was shown to lead to the most promising results. The scaffold pore structure was maintained after the MBG coating by EPD, as assessed by SEM and micro-CT. In vitro bioactivity of the scaffolds was assessed by immersion in simulated body fluid and subsequent evaluation of hydroxyapatite (HA) formation. The deposition of a MBG coating can be a smart strategy to impart bioactive properties to the scaffold, allowing the formation of nano-structured HA agglomerates within 48 h from immersion, which does not occur on uncoated scaffold surfaces. The mechanical properties of the scaffold do not vary after the EPD (compressive strength ~19 MPa, fracture energy ~1.2 × 10(6) J m(-3)) and suggest the suitability of the prepared highly bioactive constructs as bone tissue engineering implants for load-bearing applications.

Iodine capture by Hofmann-Type clathrate Ni(II)(pz)[Ni(II)(CN)4].

The thermally stable Hofmann-type clathrate framework Ni(II)(pz)[Ni(II)(CN)4] (pz = pyrazine) was investigated for the efficient and reversible sorption of iodine (I2) in the gaseous phase and in solution with a maximum adsorption capacity of 1 mol of I2 per 1 mol of Ni(II)(pz)[Ni(II)(CN)4] in solution.

Length-dependent charge generation from vertical arrays of high-aspect-ratio ZnO nanowires.

Aqueous chemical growth of zinc oxide nanowires is a flexible and effective approach to obtain dense arrays of vertically oriented nanostructures with high aspect ratio. Herein we present a systematic study of the different synthesis parameters that influence the ZnO seed layer and thus the resulting morphological features of the free-standing vertically oriented ZnO nanowires. We obtained a homogeneous coverage of transparent conductive substrates with high-aspect-ratio nanowire arrays (length/diameter ratio of up to 52). Such nanostructured vertical arrays were examined to assess their electric and piezoelectric properties, and showed an electric charge generation upon mechanical compressive stress. The principle of energy harvesting with these nanostructured ZnO arrays was demonstrated by connecting them to an electronic charge amplifier and storing the generated charge in a series of capacitors. We found that the generated charge and the electrical behavior of the ZnO nanowires are strictly dependent on the nanowire length. We have shown the importance of controlling the morphological properties of such ZnO nanostructures for optimizing a nanogenerator device.

Genotoxicity of amorphous silica particles with different structure and dimension in human and murine cell lines.

Although amorphous silica is used in food products, cosmetics and paints and as vector for drug delivery, data on its potential health hazard are limited. The aim of this study was to investigate the cytotoxic and genotoxic potential of silica particles of different sizes (250 and 500nm) and structures (dense and mesoporous). Dense silica (DS) spheres were prepared by sol-gel synthesis, mesoporous silica particles (MCM-41) were prepared using hexadecyltrimethyl ammonium bromide as a structure-directing agent and tetraethylorthosilicate as silica source. Particles were accurately characterised by dynamic light scattering, nitrogen adsorption, X-ray diffraction and field emission scanning electron microscopy. Murine macrophages (RAW264.7) and human epithelial lung (A549) cell lines were selected for investigation. Genotoxicity was evaluated by Comet assay and micronucleus test. Cytotoxicity was tested by the trypan blue method. Cells were treated with 0, 5, 10, 20, 40 and 80 µg/cm(2) of different silica powders for 4 and 24 h. The intracellular localisation of silica was investigated by transmission electron microscopy. Amorphous particles penetrated into the cells, being compartmentalised within endocytic vacuoles. DS and MCM-41 particles induced cytotoxic and genotoxic effects in A549 and RAW264.7 although to different extent in the two cell lines. A549 were resistant in terms of cell viability, but showed a generalised induction of DNA strand breaks. RAW264.7 were susceptible to amorphous silica exposure, exhibiting both cytotoxic and genotoxic responses as DNA strand breaks and chromosomal alterations. The cytotoxic response of RAW264.7 was particularly relevant after MCM-41 exposure. The genotoxicity of amorphous silica highlights the need for a proper assessment of its potential hazard for human health.