RESUMEN
Coordination polymers may be synthesized by linear bridging ligands to metal ions with conventional chemistry methods (e.g. in solution). Such complexes can be hardly brought onto a substrate with the chemical, spatial and geometrical homogeneity required for device integration. Instead, we follow an in situ synthesis approach, where the anchoring points are provided by a monolayer of metal(II)-tetraphenylporphyrin (M-TPP, M = Cu, Zn, Co) grown in vacuum on the rutile-TiO2(110) surface. We probed the metal affinity to axial coordination by further deposition of symmetric dipyridyl-naphthalenediimide (DPNDI). By NEXAFS linear polarization dichroism, we show that DPNDI stands up on Zn- and Co-TPP thanks to axial coordination, whereas it lies down on the substrate for Cu-TPP. Calculations for a model pyridine ligand predict strong binding to Zn and Co cations, whose interaction with the O anions underneath is disrupted by surface trans effect. The weaker interactions between pyridine and Cu-TPP are then overcome by the strong attraction between TiO2 and DPNDI. The binding sites exposed by the homeotropic alignment of the ditopic DPNDI ligand on Zn- and Co-TPP are the foundations to grow coordination polymers preserving the lateral coherence of the basal layer.
RESUMEN
Stabilizing ordered assemblies of molecules represents the first step towards the construction of molecular devices featuring hybrid (organic-inorganic) interfaces where molecules can be easily functionalized in view of specific applications. Molecular layers of planar metal-tetraphenylporphyrins (MTPP) grown on an ultrathin iron oxide [namely Fe(001)-p(1 × 1)O] show indeed a high degree of structural order. The generality of such a picture is tested by exploiting non-planar porphyrins, such as vanadyl-TPP (VOTPP). These molecules feature a VO2+ ion in their center, with the O atom protruding out of the plane of the porphyrin ring. In this work, by employing diffraction, photoemission and X-ray absorption, we prove that non-planar VOTPP can nevertheless form a square and ordered superstructure, where porphyrin molecules lie flat with respect to the underlying substrate. Ab initio density functional theory simulations are used to elucidate the VîO bond orientation with respect to the iron substrate.
RESUMEN
Hybrid sp-sp2 structures can be efficiently obtained on metal substrates via on-surface synthesis. The choice of both the precursor and the substrate impacts on the effectiveness of the process and the stability of the formed structures. Here we demonstrate that using anthracene-based precursor molecules on Au(111) the formation of polymers hosting sp carbon chains is affected by the steric hindrance between aromatic groups. In particular, by scanning tunneling microscopy experiments and density functional theory simulations we show that the de-metalation of organometallic structures induces a lateral separation of adjacent polymers that prevents the formation of ordered domains. This study contributes to the understanding of the mechanisms driving the on-surface synthesis processes, a fundamental step toward the realization of novel carbon-based nanostructures with perspective applications in nanocatalysis, photoconversion, and nano-electronics.
RESUMEN
Copper(II) azacyclam complexes (azacyclam = 1,3,5,8,12-pentaazacyclotetradecane) containing naphthyl or dansyl subunits can be prepared by template synthesis involving proper sulfonamide derivatives as locking fragments. The macrocyclic complexes are very poorly emissive due to the fluorescence-quenching behavior displayed by Cu2+ ions. However, the fluorescence can be recovered as a result of the decomposition of the complexes, which induces the release of free light-emitting subunits to the solution. This reaction takes place very slowly in neutral water but its rate is increased by the presence of sulfite. Therefore, [Cu(azacyclam)]2+ derivatives have been investigated as simple chemical probes for the fluorogenic detection of sulfite both on laboratory and real samples. Preliminary tests performed on samples of white wine provided sulfite concentration values that are in agreement with those obtained by a standard analytical method.
Asunto(s)
Cobre , Agua , Cobre/química , Espectrometría de Fluorescencia/métodos , Sulfitos , Agua/químicaRESUMEN
We have recently discussed how organic nanocrystal dissolution appears in different morphologies and the role of the solution pH in the crystal detriment process. We also highlighted the role of the local molecular chemistry in porphyrin nanocrystals having comparable structures: in water-based acid solutions, protonation of free-base porphyrin molecules is the driving force for crystal dissolution, whereas metal (ZnII ) porphyrin nanocrystals remain unperturbed. However, all porphyrin types, having an electron rich π-structure, can be electrochemically oxidized. In this scenario, a key question is: does electrochemistry represent a viable strategy to drive the dissolution of both free-base and metal porphyrin nanocrystals? In this work, by exploiting electrochemical atomic force microscopy (EC-AFM), we monitor inâ situ and in real time the dissolution of both free-base and metal porphyrin nanocrystals, as soon as molecules reach the oxidation potential, showing different regimes according to the applied EC potential.
RESUMEN
Two novel phenothiazin-5-ium derivatives bearing cyclam moieties (3 a+ and 3 b+ ) were synthesized and investigated as Cu2+ sensors. Both ligands show intense spectral changes in the presence of Cu2+ in aqueous solutions. The high molar extinction coefficient of the chromophore allows both naked eye detection and spectrophotometric quantitative determination of the cation at a micromolar-concentration scale. 3 a+ was found to outperform 3 b+ , showing negligible spectral changes in the presence of excesses of other metal cations.
RESUMEN
We investigated the impact of singly occupied molecular orbital (SOMO) energy on the n-doping efficiency of benzimidazole derivatives. By designing and synthesizing a series of new air-stable benzimidazole-based dopants with different SOMO energy levels, we demonstrated that an increase of the dopant SOMO energy by only â¼0.3 eV enhances the electrical conductivity of a benchmark electron-transporting naphthalenediimide-bithiophene polymer by more than 1 order of magnitude. By combining electrical, X-ray diffraction, and electron paramagnetic resonance measurements with density functional theory calculations and analytical transport simulations, we quantitatively characterized the conductivity, Seebeck coefficient, spin density, and crystallinity of the doped polymer as a function of the dopant SOMO energy. Our findings strongly indicate that charge and energy transport are dominated by the (relative) position of the SOMO level, whereas morphological differences appear to play a lesser role. These results set molecular-design guidelines for next-generation n-type dopants.
RESUMEN
Three perfluorinated ZnII porphyrins were evaluated as n-type sensitizers in photoelectrosynthetic cells for HBr and water splitting. All the dyes are featured by the presence of pentafluorophenyl electron-withdrawing groups to increase the ground-state oxidation potential and differ for the nature and position of the π-conjugate linker between the core and anchoring group tasked to bind the metal oxide, in order to assess the best way of coupling with the semiconductor. A phenyl-triazole moiety was used to link the carboxylic anchoring group onto the meso position, while an ethynyl-phenyl linker was chosen to bridge carboxylic and cyanoacrylic groups onto the ß-pyrrolic position. A combination of electrochemical, computational, and spectroscopic investigations confirmed the strong electron-withdrawing effect of the perfluorinated porphyrin core, which assures all the investigated dyes of the high oxidation potential required to the coupling with water oxidation catalysts (WOC). Such an electron-poor core, however, affects the charge separation character of the dyes, as demonstrated by the spatial distribution of the excited states, leading to a nonquantitative charge injection, although tilting of the molecules on the semiconductor surface could bring the porphyrin ring closer to the semiconductor, offering additional charge-transfer pathways. Indeed, all the dyes demonstrated successful in the splitting of both aqueous HBr and water, with the best results found for the SnO2/TiO2 photoanode sensitized with the ß-substituted porphyrin equipped with a cyanoacrylic terminal group, achieving 0.4 and 0.1 mA/cm2 photoanodic currents in HBr and water under visible light, respectively. The faradaic yield for oxygen evolution in the presence of an IrIV catalyst was over 95%, and the photoanode operation was stable for more than 1000 s. Thus, the perfluorinated porphyrins with a cyanoacrylic anchoring group at the ß-position should be considered for further development to improve the charge-transfer character.
RESUMEN
Dye-Sensitized Solar Cells (DSSCs) are a highly promising alternative to conventional photovoltaic silicon-based devices, due to the potential low cost and the interesting conversion efficiencies. A key-role is played by the dye, and porphyrin sensitizers have drawn great interest because of their excellent light harvesting properties mimicking photosynthesis. Indeed, porphyrins are characterized by strong electronic absorption bands in the visible region up to the near infrared and by long-lived π* singlet excited states. Moreover, the presence of four meso and eight ß-pyrrolic positions allows a fine tuning of their photoelectrochemical properties through structural modification. Trans-A2BC push-pull ZnII porphyrins, characterized by a strong and directional electron excitation process along the push-pull system, have been extensively investigated. On the other hand, A4 ß-pyrrolic substituted tetraaryl ZnII porphyrins, which incorporate a tetraaryl porphyrinic core as a starting material, have received lower attention, even if they are synthetically more attractive and show several advantages such as a more sterically hindered architecture and enhanced solubility in most common organic solvents. The present contribution intends to review the most prominent A4 ß-substituted ZnII porphyrins reported in the literature so far for application in DSSCs, focusing on the strategies employed to enhance the light harvesting capability of the dye and on a comparison with meso-substituted analogs.
RESUMEN
Complex [Pt(iPr2 pipdt)(Quinoxdt)] (iPr2 pipdt=1,4-diisopropyl-piperazine-2,3-dithione; Quinoxdt=[1,4]dithiino[2,3-b]quinoxaline-2,3-dithiolate) exhibits a remarkable green emission at 570â nm (room temperature), which is above the lowest excited state. The complex is characterized by negative solvatochromism as well as a high second-order polarizability. Addition of AgI ions induces 1)â hypsochromic shift of the lowest frequencies and 2)â reversible quenching of luminescence. The corresponding Ni and Pd complexes have also been prepared and investigated to assist interpretation of optical properties within the triad. Computational studies based on DFT and time-dependent DFT highlight the electronic properties of [Pt(iPr2 pipdt)(Quinoxdt)]. The preferential site of interaction between the Pt complex and incoming AgI is evidenced by the shape of the Fukui functions, pointing to the thiolic sulfur and platinum atoms as the most reactive sites towards a soft cation. Calculated optical properties are in agreement with experimental findings. This study sheds light on the structure-property relationship for this class of compounds.
RESUMEN
The combination of ß-substituted Zn2+ porphyrin dyes and copper-based electrolytes represents a sustainable route for economic and environmentally friendly dye-sensitized solar cells. Remarkably, a new copper electrolyte, [Cu(2-mesityl-1,10-phenanthroline)2]+/2+, exceeds the performance reached by Co2+/3+ and I-/I3- reference electrolytes.
RESUMEN
A series of 5,15 push-pull meso-diarylzinc(II) porphyrinates, carrying one or two -COOH or -COOCH3 acceptor groups and a -OCH3 or a -N(CH3)2 donor group, show in N,N-dimethylformamide and CHCl3 solutions a negative and solvent-dependent second-order nonlinear-optical (NLO) response measured by the electric-field-induced second-harmonic generation (EFISH) technique, different from the structurally related zinc(II) porphyrinate carrying a -N(CH3)2 donor group and a -NO2 acceptor group, where a still solvent-dependent but positive EFISH second-order response was previously reported. Moreover, when a -N(CH3)2 donor group and a -COOH acceptor group are part of a sterically hindered 2,12 push-pull ß-pyrrolic-substituted tetraarylzinc(II) porphyrinate, the EFISH response is positive and solvent-independent. In order to rationalize these rather intriguing series of observations, EFISH measurements have been integrated by electronic absorption and IR spectroscopic investigations and by density functional theory (DFT) and coupled-perturbed DFT theoretical and 1H pulsed-gradient spin-echo NMR investigations, which prompt that the significant concentration effects and the strong influence of the solvent nature on the NLO response are originated by a complex whole of different aggregation processes induced by the -COOH group.
RESUMEN
The antipodal introduction of two bromine atoms on the 2,12 ß-pyrrolic position of 5,10,15,20-tetra(3,5-di-tert-butylphenyl)porphyrin was successfully achieved by a light-induced reaction of the substrate with excess NBS. Complexation with Ni(II) of the major regioisomer led to good quality crystals, suitable for X-ray structure determination with unprecedented probability levels. The regiospecific character of the synthetic procedure and the exactness of the bromine atom position assignment were thus confirmed, suggesting an unexpected electrophilic aromatic substitution pathway rather than a free-radical halogenation process. A QTAIM topological analysis on the DFT-optimized wave function of the monosubstituted free-base porphyrin intermediate carrying a bromine atom in C2 ß-pyrrolic position confirmed the largest negative charge for the C12 carbon atom in antipodal position, in agreement with the proposed electrophilic aromatic substitution mechanism.
RESUMEN
Time-resolved photophysical and photoelectrochemical investigations have been carried out to compare the electron transfer dynamics of a 2-ß-substituted tetraarylporphyrinic dye (ZnB) and a 5,15-meso-disubstituted diarylporphyrinic one (ZnM) at the electrolyte/dye/TiO2 interface in PSSCs. Although the meso push-pull structural arrangement has shown, up to now, to have the best performing architecture for solar cell applications, we have obtained superior energy conversion efficiencies for ZnB (6.1%) rather than for ZnM (3.9%), by using the I(-)/I3(-)-based electrolyte. To gain deeper insights about these unexpected results, we have investigated whether the intrinsic structural features of the two different porphyrinic dyes can play a key role on electron transfer processes occurring at the dye-sensitized TiO2 interface. We have found that charge injection yields into TiO2 are quite similar for both dyes and that the regeneration efficiencies by I(-), are also comparable and in the range of 75-85%. Moreover, besides injection quantum yields above 80%, identical dye loading, for both ZnB and ZnM, has been evidenced by spectrophotometric measurements on transparent thin TiO2 layers after the same adsorption period. Conversely, major differences have emerged by DC and AC (electrochemical impedance spectroscopy) photoelectrochemical investigations, pointing out a slower charge recombination rate when ZnB is adsorbed on TiO2. This may result from its more sterically hindered macrocyclic core which, besides guaranteeing a decrease of π-staking aggregation of the dye, promotes a superior shielding of the TiO2 surface against charge recombination involving oxidized species of the electrolyte.
RESUMEN
A facile and fast approach, based on microwave-enhanced Sonogashira coupling, has been employed to obtain in good yields both mono- and, for the first time, disubstituted push-pull Zn(II) porphyrinates bearing a variety of ethynylphenyl moieties at the ß-pyrrolic position(s). Furthermore, a comparative experimental, electrochemical, and theoretical investigation has been carried out on these ß-mono- or disubstituted Zn(II) porphyrinates and meso-disubstituted push-pull Zn(II) porphyrinates. We have obtained evidence that, although the HOMO-LUMO energy gap of the meso-substituted push-pull dyes is lower, so that charge transfer along the push-pull system therein is easier, the ß-mono- or disubstituted push-pull porphyrinic dyes show comparable or better efficiencies when acting as sensitizers in DSSCs. This behavior is apparently not attributable to more intense B and Q bands, but rather to more facile charge injection. This is suggested by the DFT electron distribution in a model of a ß-monosubstituted porphyrinic dye interacting with a TiO2 surface and by the positive effect of the ß substitution on the incident photon-to-current conversion efficiency (IPCE) spectra, which show a significant intensity over a broad wavelength range (350-650â nm). In contrast, meso-substitution produces IPCE spectra with two less intense and well-separated peaks. The positive effect exerted by a cyanoacrylic acid group attached to the ethynylphenyl substituent has been analyzed by a photophysical and theoretical approach. This provided supporting evidence of a contribution from charge-transfer transitions to both the B and Q bands, thus producing, through conjugation, excited electrons close to the carboxylic anchoring group. Finally, the straightforward and effective synthetic procedures developed, as well as the efficiencies observed by photoelectrochemical measurements, make the described ß-monosubstituted Zn(II) porphyrinates extremely promising sensitizers for use in DSSCs.
RESUMEN
Excimer formation in a new class of terthiophene-based fluorophores covalently bonded to a cyclotetrasiloxane scaffold has been demonstrated and the photophysical process ruling it has been investigated in detail and modeled theoretically. In contrast to the conventional systems in which long-living fluorophores such as pyrene are linked in the same molecule, an excimer is formed only when two terthiophene-based branches nano-organized on the same cyclotetrasiloxane scaffold are close enough together when excitation takes place. In such a case, excimer formation is extremely efficient, and the new bound excited states are quite stable.
RESUMEN
Barium ion can be revealed at the micromolar concentration level by the blue-green fluorescence which arises upon the self-assembling process involving the metal ion and a novel bis-15-crown-5-naphthalenediimide derivative.
RESUMEN
The new quadridentate bischelating ligands 2 and 3 display in solution the typical absorption and emission properties expected for naphthalenediimide derivatives. Spectrophotometric studies show that systems 2 and 3 interact with Zn(II), Cd(II) and Cu(I) in CHCl3 or MeCN according to an apparent 1:1 stoichiometry. Molecular modelling, ESI-MS and 1H NMR experiments indicate that the complex species formed in the presence of stoichiometric amounts of metal ion are nonhelical [2 + 2] adducts. The metal-induced self-assembling process is signalled by an intense excimer-type emission caused by the intramolecular interaction of two naphthalenediimide subunits that face each other in the [2 + 2] adduct, as shown by molecular modelling studies. In the presence of excess metal ion, a disassembling process takes place, leading to a dinuclear complex with a 2:1 metal/ligand stoichiometry, in which the intramolecular excimer is no longer allowed to form because the interaction between the naphthalenediimide subunits has been lost. Thus, the overall metal-induced assembling/disassembling process is signalled by the appearance and disappearance of the excimer band in the emission spectrum.