Integrated, Selective, Simultaneous Multigas Sensing Based on Nondispersive Infrared Spectroscopy-Type Photoacoustic Spectroscopy.

Most chemical sensing scenarios require the selective and simultaneous determination of the concentrations of multiple gas species. In order to enable large-scale monitoring, reliability, robustness, and the potential for integration and miniaturization are key parameters that next-generation sensing technologies must comply with. Due to their superior sensitivity and selectivity as compared to standard NDIR-type systems, photoacoustic NDIR-approaches offer a means for selective detection at much reduced system dimensions such that microintegration becomes feasible. This contribution presents an acoustic frequency multiplexing method to integrate sensing capabilities for the parallel analysis of multiple gases in a single device without loss in selectivity via sound frequency separation. The approach is demonstrated using mid-infrared light emitting diodes and a multigas photoacoustic detector to monitor some of the most important greenhouse gases: carbon dioxide and methane. The number of gas species the sensor concept is able to detect simultaneously can be expanded without increasing the size of the system or its complexity. Additionally, the results demonstrate that the integrated device features the same selectivity and sensitivity as the currently used single gas photoacoustic NDIR systems. Furthermore, the possibility of an extension to any number of gas species is argued.

A Wireless Gas Sensor Network to Monitor Indoor Environmental Quality in Schools.

Schools are amongst the most densely occupied indoor areas and at the same time children and young adults are the most vulnerable group with respect to adverse health effects as a result of poor environmental conditions. Health, performance and well-being of pupils crucially depend on indoor environmental quality (IEQ) of which air quality and thermal comfort are central pillars. This makes the monitoring and control of environmental parameters in classes important. At the same time most school buildings do neither feature automated, intelligent heating, ventilation, and air conditioning (HVAC) systems nor suitable IEQ monitoring systems. In this contribution, we therefore investigate the capabilities of a novel wireless gas sensor network to determine carbon dioxide concentrations, along with temperature and humidity. The use of a photoacoustic detector enables the construction of long-term stable, miniaturized, LED-based non-dispersive infrared absorption spectrometers without the use of a reference channel. The data of the sensor nodes is transmitted via a Z-Wave protocol to a central gateway, which in turn sends the data to a web-based platform for online analysis. The results show that it is difficult to maintain adequate IEQ levels in class rooms even when ventilating frequently and that individual monitoring and control of rooms is necessary to combine energy savings and good IEQ.

Photo-Induced Room-Temperature Gas Sensing with a-IGZO Based Thin-Film Transistors Fabricated on Flexible Plastic Foil.

We present a gas sensitive thin-film transistor (TFT) based on an amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) semiconductor as the sensing layer, which is fabricated on a free-standing flexible polyimide foil. The photo-induced sensor response to NO2 gas at room temperature and the cross-sensitivity to humidity are investigated. We combine the advantages of a transistor based sensor with flexible electronics technology to demonstrate the first flexible a-IGZO based gas sensitive TFT. Since flexible plastic substrates prohibit the use of high operating temperatures, the charge generation is promoted with the help of UV-light absorption, which ultimately triggers the reversible chemical reaction with the trace gas. Furthermore, the device fabrication process flow can be directly implemented in standard TFT technology, allowing for the parallel integration of the sensor and analog or logical circuits.

Odor-Sensing System to Support Social Participation of People Suffering from Incontinence.

This manuscript describes the design considerations, implementation, and laboratory validation of an odor sensing module whose purpose is to support people that suffer from incontinence. Because of the requirements expressed by the affected end-users the odor sensing unit is realized as a portable accessory that may be connected to any pre-existing smart device. We have opted for a low-cost, low-power consuming metal oxide based gas detection approach to highlight the viability of developing an inexpensive yet helpful odor recognition technology. The system consists of a hotplate employing, inkjet-printed p-type semiconducting layers of copper(II) oxide, and chromium titanium oxide. Both functional layers are characterized with respect to their gas-sensitive behavior towards humidity, ammonia, methylmercaptan, and dimethylsulfide and we demonstrate detection limits in the parts-per-billion range for the two latter gases. Employing a temperature variation scheme that reads out the layer's resistivity in a steady-state, we use each sensor chip as a virtual array. With this setup, we demonstrate the feasibility of detecting odors associated with incontinence.