Outcomes and Prognostic Analysis of Surgical Resection for Oligometastasis from Hepatocellular Carcinoma.

BACKGROUND/AIM: This study aimed to evaluate the outcomes of patients who underwent resection for oligometastasis from hepatocellular carcinoma (HCC) and identify the prognostic factors associated with poor survival. PATIENTS AND METHODS: Patients who underwent resection for oligometastasis from HCC between January 2000 and April 2021 were retrospectively investigated. Oligometastasis was defined as 1-5 single organ metastases that were detected preoperatively in this study. Clinical characteristics and treatment outcomes were analyzed, and independent risk factors for poor prognosis were identified using cox proportional hazards model. RESULTS: A total of 33 patients were included in this study. Eleven oligometastases were located in the intraabdominal lymph node, 8 in the adrenal gland, 5 in the lung, 4 in the peritoneum, 3 in the pleura, and 1 each in the supraclavicular lymph node and abdominal wall. No re-operation or operative death occurred in this study. The median OS was 44.6 months (range=5.1-150.6 months), and the median survival after primary HCC diagnosis was 116.5 months (range=7.1-253.6 months). The median cumulative incidence of recurrent HCC was 7.2 months (range=0.3-94.7 months). The multivariate analysis showed that an alpha-fetoprotein level ≥20 ng/ml and multiple primary HCC tumors were independent poor prognostic factors. CONCLUSION: Clinical characteristics and treatment outcomes of patients who underwent resection for oligometastasis from HCC were demonstrated. A high alpha-fetoprotein level and multiple primary HCC tumors were independent poor prognostic factors. Surgical resection can be one of the treatment options for oligometastasis from HCC.

Nutrient recovery from biomass cultivated as catch crop for removing accumulated fertilizer in farm soil.

As a result of long-term continuous use of fertilizers in farm land, a large amount of nutrients accumulate in the soil, increasing the risk of eutrophication or nitrate pollution of groundwater. For rehabilitating the farm soil and recovering nutrients such as nitrogen, phosphorus and potassium, a new system has been developed by our research group. This paper discusses the methodology of extracting nutrients from biomass in order to recover phosphorus and other nutrients in crystal form. Around 80% or higher extraction rates were achieved for phosphorus and potassium by soaking the powdered tissue in distilled water or 1% NaOH solution for 24 h. The extracted phosphorus and potassium act as a potential resource for recycled fertilizer or other industrial materials.

Formation of chlorinated aromatics in model fly ashes using various copper compounds.

Various copper compounds found in fly ash are related to the formation of chlorinated aromatics. The formation potentials of chlorinated aromatics in different model fly ashes containing various copper compounds and the chemical behavior of such copper compounds were investigated. In model fly ash with copper metal, hydroxide, carbonate, or oxides, the generated amounts of chlorobenzene (CBz) and polychlorinated biphenyls (PCBs) and the average chlorination numbers were low and at the same level, respectively. The maximum generated amounts of chlorinated aromatics were observed at 300 degrees C. Although X-ray absorption near edge structure (XANES) spectra indicated that the chemical form of copper compounds changed little, they were found to promote the formation of chlorinated aromatics. Therefore, these copper compounds play the same role as CuO. On the other hand, in model fly ash with copper chloride, the generated amounts of CBz and PCBs were quite high and the average chlorination numbers was high. Dynamic changes were observed in XANES spectra, and the pre-edge peak attributed to monovalent copper compounds appeared at around 300 degrees C. A large difference was observed between these two groups in the amount of CuCl generated and the homologs of chlorinated aromatics present, indicating that CuCl played an important role in the formation of chlorinated aromatics.

Behaviour and adsorptive removal of siloxanes in sewage sludge biogas.

We investigated the behaviour of siloxanes, which adversely affect biogas engines, as well as their concentration levels in sewage sludge biogas in Japan. We also performed experiments on the absorptive removal of siloxanes using various adsorbents and determined the main adsorbent characteristics required for the removal of siloxanes. The results of our study on the concentration and composition of siloxanes in biogas were similar to previous reports. Moreover, we found that the concentration of siloxanes changes in relation to the outside air temperature based on real-time measurements of siloxanes using a continuous analyser. We further speculated that the continuous analyser would accurately indicate the siloxane concentration in model biogas but overestimate the siloxane concentration in actual biogas because of positive interference by VOCs and other biogas components. In the siloxane adsorption experiment, the equilibrium uptake of both cyclic siloxanes, D4 and D5, was positively related to the BET-specific surface area of the adsorbents and the fraction of the external surface area taken up by relatively large diameter pores. We attributed the adsorption results to the fact that the siloxane molecules are generally larger than micropores; therefore, they are less susceptible to adsorption to micropores. Based on these results, we concluded that adsorbents with large BET-specific surface areas, especially those with a high external specific surface area and pores of relatively large diameters, are desired for the removal of siloxanes.

Asymmetry of force fluctuation in knee extension.

The purpose of this study was to investigate the asymmetry of force fluctuation and mechanomyogram (MMG) signal during low intensity isometric knee extension. Twelve healthy males (21+/-1 years) performed unilateral force matching tasks; sustained isometric knee extension for 15 s at levels corresponding to 10% and 20% maximal voluntary contraction (MVC) with the visual feedback of force. During the force matching tasks, MMG was detected by an accelerometer arrangement placed on the vastus lateralis. Power spectrum density of the MMG was obtained by the fast Fourier transformation method, and mean power frequency (MPF) was calculated. Force fluctuation, amplitude of MMG and MPF of MMG were significantly increased in 20% MVC task compared to the 10% MVC task in both limbs. Significant differences between stronger MVC limb and weaker MVC limb were not observed in force fluctuation, amplitude of MMG and MPF of MMG during 10% and 20% MVC tasks. These results suggest that the asymmetry of force steadiness during low intensity isometric knee extension was not observed because there was no difference regarding mechanical characteristics in active muscle between stronger and weaker limbs.

The critical velocity and 1500-m surface performances in Finswimming.

The purpose of this investigation was to determine whether the concepts of critical velocity (CV) and anaerobic swimming capacity (ASC) could be used by coaches as a reliable index in order to monitor 1500-m Surface (SF) performances in Finswimming. Thirteen Finswimmers (6 males and 7 females, 24+/-6 years), members of the Japanese national team, were instructed to swim three different swimming distances (400-, 800-, and 1500-m) at maximal effort in a 50m long course swimming pool. CV and the ASC were calculated using 400-m and 800-m swim times. Mean height and body mass were 170.2 cm and 69.7 kg in male and 160.5 and 61.0 kg in female. A highly positive correlation was found between the CV and the mean velocity of 1500-m SF (V1500) (r=0.91, P<0.01), but no correlation was found between the ASC and V1500. (r=0.46, P=0.11). However, a high correlation was found between the ASC and the residual error of V1500, calculated from the relationship between V1500 and the CV (r=0.89, P<0.01). These results suggest that the CV is a useful method for evaluating 1500-m SF performance and an aerobic performance expressed as the CV contributes to 1500-m SF performance.

Chemical states of trace elements in sewage sludge incineration ash by using x-ray absorption fine structure.

In this study, the chemical states of chromium (Cr), arsenic (As), and selenium (Se) in sewage sludge incineration ash were determined by X-ray absorption fine structure (XAFS) spectroscopy. Sewage sludge incineration ash was sampled from several facilities, and XAFS measurements were carried out with a beam line BL01B1 at the SPring-8 facility. Cr K-edge X-ray absorption near-edge structure (XANES) spectra suggested that Cr compounds were predominantly speciated as Cr(III) and the fraction of Cr(VI) was very minor. Compared to the reference materials, Cr XANES spectra of the incineration ashes were similar to those of FeCr2O4, Cr(OH)3, and CaCr2O4. As K-edge XANES spectra indicated that As(V) compounds were present in incineration ashes. Because the chemical state of As in sewage sludge was As3+ in our previous study, we speculated that the chemical state of As changed into As(V) during the incineration process. According to Se K-edge XANES spectra, Se compounds were predominantly Se(IV), and a slight difference was observed in the chemical states amongst facilities using inorganic or organic coagulants in the dewatering process.

Extraction efficiency of phosphate from pre-coagulated sludge with NaHS.

The recovery of phosphorus from sewage and sludge treatment systems is particularly important because it is a limited resource and a large proportion of the phosphorus currently used in Japan must be imported. We have been experimentally evaluating recovery methods with sulphide. In this study, we focussed on the extraction of phosphate from the sludge, and sought to achieve a greater extraction efficiency and to validate the extraction mechanism. We conducted three experiments, i.e. a sludge-type experiment, a coagulant ratio of pre-coagulated sludge experiment, and a concentration of pre-coagulated sludge experiment. Phosphate was extracted not with normal sewage sludge but with pre-coagulated sludge and FePO4 reagent at S/Fe = 1.0-2.0. A coagulant ratio of 23mg Fe L(-1) was required in the precoagulation process to effectively extract phosphate. A high concentration of pre-coagulated sludge was required for the phosphate extraction. The mass balance was calculated, and 44.0% of phosphorus was extracted to supernatant, and 98.5% of iron and 98.3% of sulphur (44.1% of sulphur was sulphide). Thus, phosphate can be selectively separated from iron by the phosphate extraction method with NaHS, and phosphorus and iron can be recovered and reused at sewage treatment plants using ferric chloride as a coagulant.

Complex formation analysis of water-soluble calixarenes by capillary zone electrophoresis.

The equilibria of complex formation reactions between various kinds of cations and anionic calixarenes in an aqueous solution were analyzed by capillary zone electrophoresis on the basis of the change in electrophoretic mobility of the calixarenes. The apparent electrophoretic mobility of the calixarenes decreased with increasing concentrations of alkali metal ions and quaternary ammonium ions. Equilibrium constants were determined by a non-liner least-squares analysis using the changes in apparent electrophoretic mobility. The complex formation constants obtained with alkali metal ions were in the order of 10(2.3) - 10(3.0), and those with quaternary ammonium ions were 10(2.9) - 10(4.2), providing less selectivity among them. The selectivity of the calixarene toward alkali metal and quaternary ammonium ions in aqueous solution involves flexible structure, and compensative interactions of electrostatic and hydrophobic interactions. From the results obtained in this work, the electrophoretic method has proved to be useful for analyzing the reactivity of anionic calixarene in aqueous solution.