Comprehensive metabolic profiling of Geotrichum candidum and comparison with Saccharomyces cerevisiae.

Geotrichum candidum is a dimorphic yeast used in cheese processing. To our knowledge, no major metabolites have been identified to date in G. candidum except for some amino acid and fatty acid metabolites. This has limited research on the commercial use of G. candidum. In this study, we aimed to analyze temporal changes in the intra- and extra-cellular metabolites of G. candidum and Saccharomyces cerevisiae cultured in YM medium as reference. As a result of metabolite analysis, it was observed that G. candidum tends to accumulate　pentose phosphate pathway compounds, which are involved in nucleic acid synthesis, after 48 h of cultivation when compared to S. cerevisiae. In addition, G. candidum accumulated higher amounts of the antioxidant glutathione in the medium than did S. cerevisiae. In addition, G. candidum accumulated large amounts of B vitamins such as pantothenic acid and nicotinic acid in the medium. Finally, we examined the potential of G. candidum as a host for the production of useful compounds such as pantothenic acid. When cultured in medium supplemented with the pantothenic acid precursor ß-alanine, G. candidum produced 12-fold higher amounts of pantothenic acid (30 µM) than that by S. cerevisiae. This study indicates that G. candidum accumulates various useful compounds that are dissimilar to those produced by S. cerevisiae. Furthermore, G. candidum has the potential to produce useful chemicals under appropriate culture conditions.

A cryo-TSEM with temperature cycling capability allows deep sublimation of ice to uncover fine structures in thick cells.

The scanning electron microscope (SEM) has been reassembled into a new type of cryo-electron microscope (cryo-TSEM) by installing a new cryo-transfer holder and anti-contamination trap, which allowed simultaneous acquisition of both transmission images (STEM images) and surface images (SEM images) in the frozen state. The ultimate temperatures of the holder and the trap reached - 190 °C and - 210 °C, respectively, by applying a liquid nitrogen slush. The STEM images at 30 kV were comparable to, or superior to, the images acquired with conventional transmission electron microscope (100 kV TEM) in contrast and sharpness. The unroofing method was used to observe membrane cytoskeletons instead of the frozen section and the FIB methods. Deep sublimation of ice surrounding unroofed cells by regulating temperature enabled to emerge intracellular fine structures in thick frozen cells. Hence, fine structures in the vicinity of the cell membrane such as the cytoskeleton, polyribosome chains and endoplasmic reticulum (ER) became visible. The ER was distributed as a wide, flat structure beneath the cell membrane, forming a large spatial network with tubular ER.

Ultrastructural analysis in yeast reveals a meiosis-specific actin-containing nuclear bundle.

Actin polymerises to form filaments/cables for motility, transport, and the structural framework in a cell. Recent studies show that actin polymers are present not only in the cytoplasm but also in the nuclei of vertebrate cells. Here, we show, by electron microscopic observation with rapid freezing and high-pressure freezing, a unique bundled structure containing actin in the nuclei of budding yeast cells undergoing meiosis. The nuclear bundle during meiosis consists of multiple filaments with a rectangular lattice arrangement, often showing a feather-like appearance. The bundle was immunolabelled with an anti-actin antibody and was sensitive to an actin-depolymerising drug. Similar to cytoplasmic bundles, nuclear bundles are rarely seen in premeiotic cells and spores and are induced during meiotic prophase-I. The formation of the nuclear bundle is independent of DNA double-stranded breaks. We speculate that nuclear bundles containing actin play a role in nuclear events during meiotic prophase I.

Inhibition of cell membrane ingression at the division site by cell walls in fission yeast.

Eukaryotic cells assemble actomyosin rings during cytokinesis to function as force-generating machines to drive membrane invagination and to counteract the intracellular pressure and the cell surface tension. How the extracellular matrix affects actomyosin ring contraction has not been fully explored. While studying the Schizosaccharomyces pombe 1,3-ß-glucan-synthase mutant cps1-191, which is defective in division septum synthesis and arrests with a stable actomyosin ring, we found that weakening of the extracellular glycan matrix caused the generated spheroplasts to divide under the nonpermissive condition. This nonmedial slow division was dependent on a functional actomyosin ring and vesicular trafficking, but independent of normal septum synthesis. Interestingly, the high intracellular turgor pressure appears to play a minimal role in inhibiting ring contraction in the absence of cell wall remodeling in cps1-191 mutants, as decreasing the turgor pressure alone did not enable spheroplast division. We propose that during cytokinesis, the extracellular glycan matrix restricts actomyosin ring contraction and membrane ingression, and remodeling of the extracellular components through division septum synthesis relieves the inhibition and facilitates actomyosin ring contraction.

Two S. pombe septation phases differ in ingression rate, septum structure, and response to F-actin loss.

In fission yeast, cytokinesis requires a contractile actomyosin ring (CR) coupled to membrane and septum ingression. Septation proceeds in two phases. In anaphase B, the septum ingresses slowly. During telophase, the ingression rate increases, and the CR becomes dispensable. Here, we explore the relationship between the CR and septation by analyzing septum ultrastructure, ingression, and septation proteins in cells lacking F-actin. We show that the two phases of septation correlate with septum maturation and the response of cells to F-actin removal. During the first phase, the septum is immature and, following F-actin removal, rapidly loses the Bgs1 glucan synthase from the membrane edge and fails to ingress. During the second phase, the rapidly ingressing mature septum can maintain a Bgs1 ring and septum ingression without F-actin, but ingression becomes Cdc42 and exocyst dependent. Our results provide new insights into fungal cytokinesis and reveal the dual function of CR as an essential landmark for the concentration of Bgs1 and a contractile structure that maintains septum shape and synthesis.

Specific detection of fission yeast primary septum reveals septum and cleavage furrow ingression during early anaphase independent of mitosis completion.

It is widely accepted in eukaryotes that the cleavage furrow only initiates after mitosis completion. In fission yeast, cytokinesis requires the synthesis of a septum tightly coupled to cleavage furrow ingression. The current cytokinesis model establishes that simultaneous septation and furrow ingression only initiate after spindle breakage and mitosis exit. Thus, this model considers that although Cdk1 is inactivated at early-anaphase, septation onset requires the long elapsed time until mitosis completion and full activation of the Hippo-like SIN pathway. Here, we studied the precise timing of septation onset regarding mitosis by exploiting both the septum-specific detection with the fluorochrome calcofluor and the high-resolution electron microscopy during anaphase and telophase. Contrarily to the existing model, we found that both septum and cleavage furrow start to ingress at early anaphase B, long before spindle breakage, with a slow ingression rate during anaphase B, and greatly increasing after telophase onset. This shows that mitosis and cleavage furrow ingression are not concatenated but simultaneous events in fission yeast. We found that the timing of septation during early anaphase correlates with the cell size and is regulated by the corresponding levels of SIN Etd1 and Rho1. Cdk1 inactivation was directly required for timely septation in early anaphase. Strikingly the reduced SIN activity present after Cdk1 loss was enough to trigger septation by immediately inducing the medial recruitment of the SIN kinase complex Sid2-Mob1. On the other hand, septation onset did not depend on the SIN asymmetry establishment, which is considered a hallmark for SIN activation. These results recalibrate the timing of key cytokinetic events in fission yeast; and unveil a size-dependent control mechanism that synchronizes simultaneous nuclei separation with septum and cleavage furrow ingression to safeguard the proper chromosome segregation during cell division.

A New Membrane Protein Sbg1 Links the Contractile Ring Apparatus and Septum Synthesis Machinery in Fission Yeast.

Cytokinesis in many organisms requires a plasma membrane anchored actomyosin ring, whose contraction facilitates cell division. In yeast and fungi, actomyosin ring constriction is also coordinated with division septum assembly. How the actomyosin ring interacts with the plasma membrane and the plasma membrane-localized septum synthesizing machinery remains poorly understood. In Schizosaccharomyces pombe, an attractive model organism to study cytokinesis, the ß-1,3-glucan synthase Cps1p / Bgs1p, an integral membrane protein, localizes to the plasma membrane overlying the actomyosin ring and is required for primary septum synthesis. Through a high-dosage suppressor screen we identified an essential gene, sbg1+ (suppressor of beta glucan synthase 1), which suppressed the colony formation defect of Bgs1-defective cps1-191 mutant at higher temperatures. Sbg1p, an integral membrane protein, localizes to the cell ends and to the division site. Sbg1p and Bgs1p physically interact and are dependent on each other to localize to the division site. Loss of Sbg1p results in an unstable actomyosin ring that unravels and slides, leading to an inability to deposit a single contiguous division septum and an important reduction of the ß-1,3-glucan proportion in the cell wall, coincident with that observed in the cps1-191 mutant. Sbg1p shows genetic and / or physical interaction with Rga7p, Imp2p, Cdc15p, and Pxl1p, proteins known to be required for actomyosin ring integrity and efficient septum synthesis. This study establishes Sbg1p as a key member of a group of proteins that link the plasma membrane, the actomyosin ring, and the division septum assembly machinery in fission yeast.

Fission yeast septation.

In animal cells cytokinesis relies on the contraction of an actomyosin ring that pulls the plasma membrane to create a cleavage furrow, whose ingression finally divides the mother cell into two daughter cells. Fungal cells are surrounded by a tough and flexible structure called cell wall, which is considered to be the functional equivalent of the extracellular matrix in animal cells. Therefore, in addition to cleavage furrow ingression, fungal cytokinesis also requires the centripetal formation of a septum wall structure that develops between the dividing cells, whose genesis must be strictly coordinated with both the actomyosin ring closure and plasma membrane ingression. Here we briefly review what is known about the septum structure and composition in the fission yeast Schizosaccharomyces pombe, the recent progress about the relationship between septum biosynthesis and actomyosin ring constriction, and the importance of the septum and ring in the steady progression of the cleavage furrow.

The Cell Biology of Fission Yeast Septation.

In animal cells, cytokinesis requires the formation of a cleavage furrow that divides the cell into two daughter cells. Furrow formation is achieved by constriction of an actomyosin ring that invaginates the plasma membrane. However, fungal cells contain a rigid extracellular cell wall surrounding the plasma membrane; thus, fungal cytokinesis also requires the formation of a special septum wall structure between the dividing cells. The septum biosynthesis must be strictly coordinated with the deposition of new plasma membrane material and actomyosin ring closure and must occur in such a way that no breach in the cell wall occurs at any time. Because of the high turgor pressure in the fungal cell, even a minor local defect might lead to cell lysis and death. Here we review our knowledge of the septum structure in the fission yeast Schizosaccharomyces pombe and of the recent advances in our understanding of the relationship between septum biosynthesis and actomyosin ring constriction and how the two collaborate to build a cross-walled septum able to support the high turgor pressure of the cell. In addition, we discuss the importance of the septum biosynthesis for the steady ingression of the cleavage furrow.

Cooperation between Paxillin-like Protein Pxl1 and Glucan Synthase Bgs1 Is Essential for Actomyosin Ring Stability and Septum Formation in Fission Yeast.

In fungal cells cytokinesis requires coordinated closure of a contractile actomyosin ring (CAR) and synthesis of a special cell wall structure known as the division septum. Many CAR proteins have been identified and characterized, but how these molecules interact with the septum synthesis enzymes to form the septum remains unclear. Our genetic study using fission yeast shows that cooperation between the paxillin homolog Pxl1, required for ring integrity, and Bgs1, the enzyme responsible for linear ß(1,3)glucan synthesis and primary septum formation, is required for stable anchorage of the CAR to the plasma membrane before septation onset, and for cleavage furrow formation. Thus, lack of Pxl1 in combination with Bgs1 depletion, causes failure of ring contraction and lateral cell wall overgrowth towards the cell lumen without septum formation. We also describe here that Pxl1 concentration at the CAR increases during cytokinesis and that this increase depends on the SH3 domain of the F-BAR protein Cdc15. In consequence, Bgs1 depletion in cells carrying a cdc15ΔSH3 allele causes ring disassembly and septation blockage, as it does in cells lacking Pxl1. On the other hand, the absence of Pxl1 is lethal when Cdc15 function is affected, generating a large sliding of the CAR with deposition of septum wall material along the cell cortex, and suggesting additional functions for both Pxl1 and Cdc15 proteins. In conclusion, our findings indicate that CAR anchorage to the plasma membrane through Cdc15 and Pxl1, and concomitant Bgs1 activity, are necessary for CAR maintenance and septum formation in fission yeast.

Augmin-dependent microtubule nucleation at microtubule walls in the spindle.

The formation of a functional spindle requires microtubule (MT) nucleation from within the spindle, which depends on augmin. How augmin contributes to MT formation and organization is not known because augmin-dependent MTs have never been specifically visualized. In this paper, we identify augmin-dependent MTs and their connections to other MTs by electron tomography and 3D modeling. In metaphase spindles of human cells, the minus ends of MTs were located both around the centriole and in the body of the spindle. When augmin was knocked down, the latter population of MTs was significantly reduced. In control cells, we identified connections between the wall of one MT and the minus end of a neighboring MT. Interestingly, the connected MTs were nearly parallel, unlike other examples of end-wall connections between cytoskeletal polymers. Our observations support the concept of augmin-dependent MT nucleation at the walls of existing spindle MTs. Furthermore, they suggest a mechanism for maintaining polarized MT organization, even when noncentrosomal MT initiation is widespread.

Visualization of yeast cells by electron microscopy.

In the 1970s, hydrocarbon or methanol utilizable yeasts were considered as a material for foods and ethanol production. During the course of studies into the physiology of yeasts, we found that these systems provide a suitable model for the biogenesis and ultrastructure research of microbodies (peroxisomes). Microbodies of hydrocarbon utilizing Candida tropicalis multiply profusely from the preexisting microbody. ß oxidation enzymes in the microbody were determined by means of immunoelectron microscopy. We examined the ultrastructure of Candida boidinii microbodies grown on methanol, and found a composite crystalloid of two enzymes, alcohol oxidase and catalase, by analyzing using the optical diffraction and filtering technique and computer simulation. We established methods for preparing the protoplasts of Schizosaccharomyces pombe and conditions for the complete regeneration of the cell wall. The dynamic process of cell wall formation was clarified through our study of the protoplasts, using an improved ultra high resolution (UHR) FESEM S-900 and an S-900LV. It was found that ß-1,3-glucan, ß-1,6-glucan and α-1,3-glucan, as well as α-galactomannan, are ingredients of the cell wall. The process of septum formation during cell division was examined after cryo-fixation by high pressure freezing (HPF). It was also found that α-1,3- and ß-1,3-glucans were located in the invaginating nascent septum, and later, highly branched ß-1,6-glucan also appeared on the second septum. The micro-sampling method, using a focused ion beam (FIB), has been applied to our yeast cell wall research. A combination of FIB and scanning transmission electron microscopy is useful in constructing 3D images and analyzing the molecular architecture of cells, as well as for electron tomography of thick sections of biological specimens.

Fission yeast Ags1 confers the essential septum strength needed for safe gradual cell abscission.

Fungal cytokinesis requires the assembly of a dividing septum wall. In yeast, the septum has to be selectively digested during the critical cell separation process. Fission yeast cell wall α(1-3)glucan is essential, but nothing is known about its localization and function in the cell wall or about cooperation between the α- and ß(1-3)glucan synthases Ags1 and Bgs for cell wall and septum assembly. Here, we generate a physiological Ags1-GFP variant and demonstrate a tight colocalization with Bgs1, suggesting a cooperation in the important early steps of septum construction. Moreover, we define the essential functions of α(1-3)glucan in septation and cell separation. We show that α(1-3)glucan is essential for both secondary septum formation and the primary septum structural strength needed to support the physical forces of the cell turgor pressure during cell separation. Consequently, the absence of Ags1 and therefore α(1-3)glucan generates a special and unique side-explosive cell separation due to an instantaneous primary septum tearing caused by the turgor pressure.

Hyphal surface architecture and cell morphology of Trichoderma reesei.

The filamentous fungus Trichoderma reesei which is known to secrete high amounts of cellulolytic enzymes was found to produce a massive amount of fibrous material at the outer surface of the cell wall as observed by ultrahigh-resolution low-voltage scanning electron microscopy. Using transmission electron microscopy, the cell wall ornamentation of the hyper-cellulosic mutant PC-3-7 was found to be less massive and much thinner than for QM9414. A significant amount of fibrous material was produced in Avicel-grown cultures that were less abundant in glucose-grown cultures and Avicel was occasionally found entangled within the cell wall-associated fibrous layer.

Breakage of the nuclear envelope by an extending mitotic nucleus occurs during anaphase in Schizosaccharomyces japonicus.

During open mitosis in higher eukaryotic cells, the nuclear envelope completely breaks down and then mitotic chromosomes are exposed in the cytoplasm. By contrast, mitosis in lower eukaryotes, including fungi, proceeds with the nucleus enclosed in an intact nuclear envelope. The mechanism of mitosis has been studied extensively in yeast, a closed mitosis organism. Here, we describe a form of mitosis in which the nuclear envelope is torn by elongation of the nucleus in the fission yeast Schizosaccharomyces japonicus. The mitotic nucleus of Sz. japonicus adopted a fusiform shape in anaphase, and its following extension caused separation. Finally, a tear in the nuclear envelope occurred in late anaphase. At the same time, a polarized-biased localization of nuclear pores was seen in the fusiform-shaped nuclear envelope, suggesting a compromise in the mechanical integrity of the lipid membrane. It has been known that nuclear membrane remains intact in some metazoan mitosis. We found that a similar tear of the nuclear envelope was also observed in late mitosis of the Caenorhabditis elegans embryo. These findings provide insight into the diversity of mitosis and the biological significance of breakdown of the nuclear envelope.

Ubiquitin-mediated proteasomal degradation of ABC transporters: a new aspect of genetic polymorphisms and clinical impacts.

The interindividual variation in the rate of drug metabolism and disposition has been known for many years. Pharmacogenomics dealing with heredity and response to drugs is a part of science that attempts to explain variability of drug responses and to search for the genetic basis of such variations or differences. Genetic polymorphisms of drug metabolizing enzymes and drug transporters have been found to play a significant role in the patients' responses to medication. Accumulating evidence demonstrates that certain nonsynonymous polymorphisms have great impacts on the protein stability and degradation, as well as the function of drug metabolizing enzymes and transporters. The aim of this review article is to address a new aspect of protein quality control in the endoplasmic reticulum and to present examples regarding the impact of nonsynonymous single-nucleotide polymorphisms on the protein stability of thiopurine S-methyltransferase as well as ATP-binding cassette (ABC) transporters including ABCC4, cystic fibrosis transmembrane conductance regulator (CFTR, ABCC7), ABCC11, and ABCG2. Furthermore, we will discuss the molecular mechanisms underlying posttranslational modifications (intramolecular and intermolecular disulfide bond formation and N-linked glycosylation) and ubiquitin-mediated proteasomal degradation of ABCG2, one of the major drug transporter proteins in humans.

Pob1 ensures cylindrical cell shape by coupling two distinct rho signaling events during secretory vesicle targeting.

Proper cell morphogenesis requires the co-ordination of cell polarity, cytoskeletal organization and vesicle trafficking. The Schizosaccharomyces pombe mutant pob1-664 has a curious lemon-like shape, the basis of which is not understood. Here, we found abundant vesicle accumulation in these cells, suggesting that Pob1 plays a role in vesicle trafficking. We identified Rho3 as a multicopy suppressor of this phenotype. Because Rho3 function is related to For3, an actin-polymerizing protein, and Sec8, a component of the exocyst complex, we analyzed their functional relationship with Pob1. Pob1 was essential for the formation of actin cables (by interacting with For3) and for the polarized localization of Sec8. Although neither For3 nor Sec8 is essential for polarized growth, their simultaneous disruption prevented tip growth and yielded a lemon-like cell morphology similar to pob1-664. Thus, Pob1 may ensure cylindrical cell shape of S. pombe by coupling actin-mediated vesicle transport and exocyst-mediated vesicle tethering during secretory vesicle targeting.

Kre6 protein essential for yeast cell wall beta-1,6-glucan synthesis accumulates at sites of polarized growth.

Saccharomyces cerevisiae Kre6 is a type II membrane protein with amino acid sequence homology with glycoside hydrolase and is essential for ß-1,6-glucan synthesis as revealed by the mutant phenotype, but its biochemical function is still unknown. The localization of Kre6, determined by epitope tagging, is a matter of debate. We raised anti-Kre6 rabbit antiserum and examined the localization of Kre6 and its tagged protein by immunofluorescence microscopy, subcellular fractionation in sucrose density gradients, and immunoelectron microscopy. Integration of the results indicates that the majority of Kre6 is in the endoplasmic reticulum; however, a small but significant portion is also present in the secretory vesicle-like compartments and plasma membrane. Kre6 in the latter compartments is observed as strong signals that accumulate at the sites of polarized growth by immunofluorescence. The truncated Kre6 without the N-terminal 230-amino acid cytoplasmic region did not show this polarized accumulation and had a severe defect in ß-1,6-glucan synthesis. This is the first evidence of a ß-1,6-glucan-related protein showing the polarized membrane localization that correlates with its biological function.

Technical pitfalls and improvements for high-speed screening and QSAR analysis to predict inhibitors of the human bile salt export pump (ABCB11/BSEP).

Drug-induced hepatotoxicity is one of the major problems encountered in drug discovery and development. Selection of a candidate compound for pre-clinical studies in the drug discovery process is a critical step that can determine the speed and expenditure of clinical development. Because inhibition of human adenosine triphosphate-binding cassette transporter ABCB11 (SPGP/bile salt export pump) has severe consequences, which include intrahepatic cholestasis and hepatotoxicity, resulting from exposure to toxic xenobiotics or drug interactions, in vitro screening methods are necessary for quantifying and characterizing the inhibition of ABCB11. In line with such initiatives, we developed methods for in vitro high-speed screening and quantitative structure-activity relationship (QSAR) analysis to investigate the interaction of ABCB11 with a variety of compounds. We identified one set of chemical fragmentation codes closely linked with inhibition of ABCB11. Furthermore, the high-speed screening method enables us to analyze the kinetics of ABCB11-inhibition by test compounds and to distinguish competitive and non-competitive inhibitors. Troglitazone and novobiocin were found to be competitive inhibitors to taurocholate, whereas porphyrins were non-competitive inhibitors. Kinetics-based classification of inhibitors is considered important to improve the accuracy of our QSAR analysis. The present mini-review addresses technical pitfalls and improvements for high-speed screening and QSAR analysis in the ABCB11 inhibition study.

The tetraspan protein Dni1p is required for correct membrane organization and cell wall remodelling during mating in Schizosaccharomyces pombe.

In fungi, success of mating requires that both cells agglutinate, modify their extracellular envelopes, and fuse their plasma membranes and nuclei to produce a zygote. Here we studied the role of the Schizosaccharomyces pombe Dni1 protein in the cell fusion step of mating. Dni1p is a tetraspan protein bearing a conserved cystein motif similar to that present in fungal claudin-related proteins. Dni1p expression is induced during mating and Dni1p concentrates as discrete patches at the cell-cell contact area and along the mating bridge. Proper Dni1p localization depends on Fus1p, actin and integrity of lipid rafts. In dni1Delta mutants, cell differentiation and agglutination are as efficient as in the wild-type strain, but cell fusion is significantly reduced at temperatures above 25 degrees C. We found that the defect in cell fusion was not associated with an altered cytoskeleton, with an abnormal distribution of Fus1p, or with a defect in calcium accumulation, but with a severe disorganization of the plasma membrane and cell wall at the area of cell-cell contact. These results show that Dni1p plays a relevant role in co-ordinating membrane organization and cell wall remodelling during mating, a function that has not been described for other proteins in the fission yeast.