Sustainability of construction materials: Electrodialytic technology as a tool for mortars production.

The reduction of tap water consumption in all activity sectors, including the building industry, is crucial to the sustainability of water resources. Effluents from wastewater treatment plants have the potential to replace freshwater in the construction sector but they contain a critical mixture of impurities, which hampers their use in mortars production. In this work, the viability of using effluent as an alternative to potable water for the production of mortars, after electrodialytic treatment, was assessed. Electrodialytic technology (ED-T) is a proven technique for decontamination of porous and aqueous matrices. ED-T experiments were conducted with 500 mL of effluent for 6, 12 and 24 h, with a current intensity of 25 mA. The results showed that after ED-T 6 h, the removal efficiencies of critical components were above 85% of their initial concentrations. Mortar properties such as setting time, workability, flexural strength, compressive strength and morphology were obtained for 100% effluent and tap water/effluent mixtures (50:50) with and without ED-T pre-treatment. The mortars with the ED-T treated effluent showed similar initial setting times and workability, higher flexural and compressive strength compared to the mortars reference.

Environmental Electrokinetics for a sustainable subsurface.

Soil and groundwater are key components in the sustainable management of the subsurface environment. Source contamination is one of its main threats and is commonly addressed using established remediation techniques such as in-situ chemical oxidation (ISCO), in-situ chemical reduction (ISCR; most notably using zero-valent iron [ZVI]), enhanced in-situ bioremediation (EISB), phytoremediation, soil-washing, pump-and-treat, soil vapour extraction (SVE), thermal treatment, and excavation and disposal. Decades of field applications have shown that these techniques can successfully treat or control contaminants in higher permeability subsurface materials such as sands, but achieve only limited success at sites where low permeability soils, such as silts and clays, prevail. Electrokinetics (EK), a soil remediation technique mostly recognized in in-situ treatment of low permeability soils, has, for the last decade, been combined with more conventional techniques and can significantly enhance the performance of several of these remediation technologies, including ISCO, ISCR, EISB and phytoremediation. Herein, we discuss the use of emerging EK techniques in tandem with conventional remediation techniques, to achieve improved remediation performance. Furthermore, we highlight new EK applications that may come to play a role in the sustainable treatment of the contaminated subsurface.

Electrodialytic treatment for metal removal from sewage sludge ash from fluidized bed combustion.

Sewage sludge contains several potentially hazardous compounds such as heavy metals, PCBs, PAHs, etc. However, elements with high agricultural value (P, K or Ca) are also present. During the last years, the fluidized bed sludge combustor (FBSC) is considered an effective and novel alternative to treat sewage sludge. By its use, the high amount of sludge is reduced to a small quantity of ash and thermal destruction of toxic organic constituents is obtained. Conversely, heavy metals are retained in the ash. In this work the possibility for electrodialytic metal removal for sewage sludge ash from FBSC was studied. A detailed characterization of the sewage sludge ash was done initially, determining that, with the exception of Cd, the other heavy metals (Cr, Cu, Pb, Ni and Zn) were under the limiting levels of Danish legislation for the use of sewage sludge as fertilizer. After 14 days of electrodialytic treatment, the Cd concentration was reduced to values below the limiting concentration. In all experiments the concentrations of other metals were under limiting values of the Danish legislation. It can be concluded that the electrodialytic treatment is an adequate alternative to reduce the Cd concentration in FBSC ash prior to use as fertilizer.

BOLD MRI in sheep fetuses: a non-invasive method for measuring changes in tissue oxygenation.

OBJECTIVE: The purpose of this descriptive study was to correlate changes in the blood oxygen level-dependent (BOLD) magnetic resonance imaging (MRI) signal with direct measurements of fetal tissue oxygenation. METHODS: Seven anesthetized ewes carrying singleton fetuses at 125 days' gestation (term 145 days) underwent BOLD MRI, covering the entire fetus in a multislice approach. The fetuses were subjected to normoxic, hypoxic and hyperoxic conditions by changing the O(2)/N(2)O ratio in the maternal ventilated gas supply. The partial pressure of oxygen (pO2) in the fetal liver was measured using an oxygen-sensitive optode. Maternal arterial blood samples were simultaneously withdrawn for blood gas analysis. These measurements were compared with BOLD MRI signals in the fetal liver, kidney, spleen and brain. RESULTS: We demonstrated a consistent increase in the BOLD MRI signal with increasing tissue pO(2). For the fetal liver, spleen and kidney we observed a clear association between changes in maternal arterial blood pO2 and changes in BOLD MRI signal. Interestingly, we found that the BOLD signal of the fetal brain remained unchanged during hypoxic, normoxic and hyperoxic conditions. CONCLUSIONS: This experimental study demonstrated that BOLD MRI is a reliable non-invasive method for measuring changes in tissue oxygenation in fetal sheep. The unchanged signal in the fetal brain during altered maternal oxygen conditions is probably explained by the brain-sparing mechanism.

Stressful life events are associated with a poor in-vitro fertilization (IVF) outcome: a prospective study.

BACKGROUND: There is preliminary evidence to suggest an impact of stress on chances of achieving a pregnancy with in-vitro fertilization (IVF). The majority of the available research has focused on stress related to infertility and going through IVF-treatment, and it is still unclear whether non-fertility-related, naturally occurring stressors may influence IVF pregnancy chances. Our aim was to explore the association between IVF-outcome and negative, i.e. stressful, life-events during the previous 12 months. METHODS: Prior to IVF, 809 women (mean age: 31.2 years) completed the List of Recent Events (LRE) and questionnaires measuring perceived stress and depressive symptoms. RESULTS: Women who became pregnant reported fewer non-fertility-related negative life-events prior to IVF (Mean: 2.5; SD: 2.5) than women who did not obtain a pregnancy (Mean: 3.0; SD: 3.0) (t(465.28) = 2.390, P = 0.017). Logistic regression analyses revealed that the number of negative life-events remained a significant predictor of pregnancy (OR: 0.889; P = 0.02), when controlling for age, total number of life-events, perceived stress within the previous month, depressive symptoms, and relevant medical factors related to the patient or treatment procedure, including duration of infertility, number of oocytes retrieved and infertility etiology. Mediation analyses indicated that the association between negative life events and IVF pregnancy was partly mediated by the number of oocytes harvested during oocyte retrieval. CONCLUSION: A large number of life-events perceived as having a negative impact on quality of life may indicate chronic stress, and the results of our study indicate that stress may reduce the chances of a successful outcome following IVF, possibly through psychobiological mechanisms affecting medical end-points such as oocyte retrieval outcome.

Electroremediation of straw and co-combustion ash under acidic conditions.

Biomass, such as wood and straw, is currently used in EU as a renewable energy source for energy production and this application is expected to rise in coming years. Combined heat and power installations produce fly ash, which is considered hazardous waste. The fly ash management issue should be addressed before biomass combustion is considered a truly sustainable technology. The electrodialytic process is a remediation technique able to assist the management of fly ash. For this work, straw and co-combustion of wood ash are briefly characterized and their electrodialytic treatment is carried out under acidic conditions. Straw ashes presented high removal rates for Ca, Cu, Cr and particularly for Cd, which has been reduced to a level bellow the established by Danish regulations. Acidification also induced a high dissolution and a lower pH of the ash. Fly ash from co-combustion of wood presents similarities with wood ash alone. However, further characterization should be carried out before any comparison regarding applicable legislation. Under acidic conditions, the electrodialytic treatment was not effective for the co-combustion wood ash. The heavy metals appeared in the least soluble fraction of this ash and lowering the pH of such an alkaline material does not mean sustainability and may hinder its reuse.

Modeling of electrodialytic and dialytic removal of Cr, Cu and As from CCA-treated wood chips.

A one-dimensional model is developed for simulating the electrodialytic and dialytic treatment of a saturated bed of wood chips containing chromium, copper and arsenic. The movement of Cr, Cu and As is mathematically modeled taking into account the diffusion transport resulting from the concentration gradients of their compounds and the electromigration of their ionic, simple and complex species during the operation. The model also includes the electromigration of the non-contaminant principal ionic species in the system, H(+) and OH(-), proceeding from the electrolysis at the electrodes, Na(+) and NO(3)(-) used as electrolyte solutions in the electrode compartments, and oxalate ions and protons incorporated with the oxalic acid solution during wood chips incubation. The model simulation also takes into account that OH(-) generated on the cathode, during electrodialytic remediation, is periodically neutralized by addition of nitric acid in the cathode compartment. The anion and cation-exchange membranes are simply represented as ionic filters that preclude the transport of co-ions (the cations and anions respectively) with the exception of H(+), which is retarded but considered to pass through the anion-exchange membrane.

Possible applications for municipal solid waste fly ash.

The present study focuses on existing practices related to the reuse of Municipal Solid Waste (MSW) fly ash and identifies new potential uses. Nine possible applications were identified and grouped into four main categories: construction materials (cement, concrete, ceramics, glass and glass-ceramics); geotechnical applications (road pavement, embankments); "agriculture" (soil amendment); and, miscellaneous (sorbent, sludge conditioning). Each application is analysed in detail, including final-product technical characteristics, with a special emphasis on environmental impacts. A comparative analysis of the different options is performed, stressing the advantages but also the weaknesses of each option. This information is systemized in order to provide a framework for the selection of best technology and final products. The results presented here show new possibilities for this waste reuse in a short-term, in a wide range of fields, resulting in great advantages in waste minimization as well as resources conservation.

Speciation and mobility of cadmium in straw and wood combustion fly ash.

Two fly ashes from biomass combustion have been analysed regarding cadmium speciation and mobility. A fly ash from straw combustion contained 10 mg Cd/kg dry matter, and around 50% of the cadmium was leachable in water. The possible main speciation of cadmium in this fly ash was CdCl2. When adding this fly ash to agricultural soil a threat for groundwater contamination and plant uptake is existing. A fly ash from wood chip combustion had 28.6 mg Cd/kg dry matter. In this fly ash, the cadmium was bound more heavily, with only small amounts of cadmium leached in mild extractants. A possible speciation of cadmium in this fly ash was as oxide or as CdSiO3. Long-term effects and accumulation of cadmium could be a problem when adding this fly ash to agricultural or forest soils.

Removal of Cu, Pb and Zn in an applied electric field in calcareous and non-calcareous soils.

The pH dependency of the removal of Cu, Zn and Pb by electrodialytic soil remediation from different industrially polluted soils was examined. From 18 experiments performed with five different soils, it was found that the order of mobilization due to a pH decrease was Zn>Cu>Pb. It was found, too, that each of the elements was removed at higher soil pH in calcareous soils (about 12% carbonates) than in soils with a carbonate content of less than 3.7%. In soils rich in carbonates, precipitation of heavy metal carbonates is an important retention mechanism and the heavy metal carbonates are dissolved at higher pH values than the pH at which heavy metals are desorbed in non-calcareous soils. Thus, the relation between the soil pH and the mobility of the heavy metal in the electric field is not only dependent on the heavy metal in focus, but also on the fraction of the heavy metal precipitated as carbonates.

Three methods for hysterectomy: a randomised, prospective study of short term outcome.

OBJECTIVE: To detect differences in clinical short term outcome between total abdominal hysterectomy, vaginal hysterectomy and laparoscopic assisted vaginal hysterectomy. DESIGN: Randomised controlled trial. SETTING: Department of Obstetrics and Gynaecology, Hospital of Helsingborg, Sweden. SAMPLE: One hundred-twenty women scheduled for hysterectomy for various indications. METHODS: Randomisation into three treatment arms: total abdominal hysterectomy (n = 40); vaginal hysterectomy (n = 40) and laparoscopic assisted vaginal hysterectomy (n = 40). During traditional abdominal and vaginal surgery, laparoscopic assistance was kept to a minimum. Substantial number of cases needed volume-reducing manoeuvres due to uterine size. MAIN OUTCOME MEASURES: Duration of surgery, anaesthesia, time in hospital and recovery time. RESULTS: Mean duration (range) of surgery was significantly longer for laparoscopic assisted vaginal hysterectomy compared with vaginal hysterectomy and total abdominal hysterectomy, 102 min (50-175), 81 min (35-135) and 68 min (28-125), respectively. Mean stay in hospital and mean time to recovery was significantly longer for total abdominal hysterectomy compared with vaginal hysterectomy and laparoscopic assisted vaginal hysterectomy. The difference between vaginal hysterectomy and laparoscopic assisted vaginal hysterectomy was not significant. It was possible to remove uteri under 600 g with all three methods. Four laparoscopic assisted vaginal hysterectomies and one vaginal hysterectomy were converted to open surgery. Reoperation and blood transfusion were required after two vaginal hysterectomies and one laparoscopic assisted vaginal hysterectomy. One woman needed blood transfusion after total abdominal hysterectomy. CONCLUSIONS: Traditional vaginal hysterectomy proved to be feasible and the faster operative technique compared with vaginal hysterectomy with laparoscopic assistance. The abdominal technique was somewhat faster, but time spent in theatre was not significantly shorter. Abdominal hysterectomy required on average a longer hospital stay of one day and one additional week of convalescence compared with traditional vaginal hysterectomy. Vaginal hysterectomy should be a primary method for uterine removal.