Development of a tamarind-based functional beverage with partially-hydrolyzed agave syrup and the health effects of its consumption in C57BL/6 mice.

Excess consumption of sweetened beverages is associated with a global rise in metabolic diseases. Tamarind and partially-hydrolyzed agave syrup have potential for developing healthier beverages. Our objective was to develop a functional beverage using these ingredients (PH-AS-B). We also evaluate shelf-life stability (physicochemical, microbiological, and antioxidant properties) and health effects in C57BL/6 mice compared with tamarind beverages sweetened with glucose or fructose. Optimal tamarind extraction conditions were a 1:10 ratio (g pulp/mL water) and boiling for 30 min, and the resulting beverage had a shelf life of two months at 4 °C. Non-volatile metabolites were identified using HPLC/MS. PH-AS-B was associated with decreased blood cholesterol (5%) and triglyceride (20-35%) concentrations in healthy mice as well as lower lipid (82%) concentrations and evidence of protein oxidation (42%) in the liver, compared with glucose- and fructose-sweetened tamarind beverages. In conclusion, PH-AS-B was stable and associated with beneficial metabolic properties in healthy mice.

Cooking methods determine chemical composition and functional properties of squash blossoms: A study of microstructural and bioaccessibility changes.

This research aimed to evaluate the effect of different cooking methods (boiling, stir-frying, and steaming) on the microstructure, moisture, fat, protein, and glucose-derived carbohydrate contents, and the bioactive compounds (total carotenoids: CAR, total chlorophyll: CHLO, and total phenolic compounds: TPC) and antioxidant capacity (AC) of squash blossoms. Furthermore, we characterized polyphenolic compounds using HPLC and evaluated their bioaccessibility via in vitro digestions. Our results show that steaming and boiling do not affect moisture content. Only stir-frying decreased (p < 0.05) this parameter by 8 %. Additionally, the cooking methods increased (p < 0.05) protein and glucose-derived carbohydrate contents. All cooking methods changed the microstructure of the blossoms, probably due to the thermal and mechanical variations that result in moisture loss and degradation of cell wall components. As for the functional properties, boiling caused a greater loss of TPC (up to 96 %) and AC (up to 91 %). Stir-frying caused the greatest loss of CAR (up to 81 %) and CHLO (up to 84 %). The in vitro digestion assays showed changes in the bioaccessibility of CAR, CHLO, TPC, and AC in the cooked flowers compared to the fresh ones. Finally, kaempferol and gallic acid were the most resistant polyphenols to the cooking methods and in vitro digestion.

The behavior of arsenic accumulation in onion (Allium cepa) structures by irrigation water: effect of phosphates and arsenic on the total bioactive compounds and antioxidant capacity.

The presence of arsenic (As) in irrigation water is a threat to agricultural crops as well as human health. The presence of arsenic and phosphorous in irrigation water influences the behavior of bioaccumulation, biotransfer, and total bioactive compounds in the distinct parts of the onion structure. The present work evaluates the behavior of the bioaccumulation and biotransfer of As in the structures of onion (Allium cepa) through a composite central design and response surface method. The factors employed include the concentration of arsenic (V) and phosphate (V) in the nutritive solution. Additionally, this study analyzes the behavior of the effect that the induced stress has on the total bioactive compounds (phenols and flavonoids) and antioxidant capacity (ABTS and DPPH) in the onion roots. The results showed that the physiological properties, bioaccumulation factors, As transference, and the total bioactive compounds in the onion structure are affected by the competition of As and phosphates (P(V)) in the irrigation water. For concentrations of As and phosphorous of 450 µg L-1 and 0.30 mg L-1 respectively in irrigation water, there are negative effects on the equatorial diameter of the bulb (DE), length, weight of the leaf, and weight of the bulb. Besides, the transference and bioaccumulation factors range from 0.02 to 0.22 and from 2.15 to 7.81, respectively, suggesting that the plant has the ability to accumulate As but exhibits a low translocation ability of As from the root to aerial organs. Besides, it is found for central concentrations of As and phosphorous (450 µg L-1 and 0.30 mg L-1, respectively) in irrigation water, a greater production occurs in total phenolic compounds and antioxidant capacity (ABTS and DPPH) as a response to the stress generated by As.

Changes in phenolics and flavonoids in amaranth and soybean sprouts after UV-C treatment.

Sprouts, mainly from cereals, legumes, and some pseudo-cereals, are rich in nutrients and contain biocompounds, making them attractive for consumption. This research study aimed to develop treatments with UV-C light in soybean and amaranth sprouts and evaluate their effect on biocompounds content, compared with chlorine treatments. UV-C treatments were applied at distances of 3 and 5 cm and times of 2.5, 5, 10, 15, 20, and 30 min, whereas chlorine treatments were applied as immersion in solutions at 100 and 200 ppm for 15 min. Phenolics and flavonoid content were higher in UV-C-treated sprouts than in those treated with chlorine solutions. Ten biocompounds were identified in soybean sprouts, with increasing in apigenin C-glucoside-rhamnoside (105%), apigenin 7-O-glucosylglucoside (237%), and apigenin C-glucoside malonylated (70%) due to UV-C application (3 cm, 15 min); for amaranth sprouts, five biocompounds were identified, with higher contents of p-coumaroylquinic acid (17.7%) after UV-C treatment (3 cm, 15 min). The best treatment to achieve the highest bioactive compounds concentration was UV-C at a distance of 3 cm for 15 min, without significant modification on the color parameters, Hue and chroma. PRACTICAL APPLICATION: UV-C can be used to increase the biocompound content in amaranth and soybean sprouts. Nowadays, there is UV-C equipment available for industrial applications. In this way, sprouts may be maintained as fresh through this physical technology, and they will retain or increase the concentration of health-related compounds.

Agave Syrup as an Alternative to Sucrose in Muffins: Impacts on Rheological, Microstructural, Physical, and Sensorial Properties.

Natural sweeteners, such as agave syrup, might be a healthy alternative to sucrose used in sweet bakery products linked to obesity. We evaluated the effect of sucrose replacement by agave syrup on rheological and microstructural properties of muffin batter and on physical and sensorial properties of the baked product. Muffins were formulated by replacing 25%, 50%, 75%, and 100% of sucrose by agave syrup (AS) and partially hydrolyzed agave syrup (PHAS), and by adding xanthan gum and doubled quantities of leavening agents. Rheological and microstructural properties of batter during baking were analyzed over the range of 25-100 °C. In the muffins, the structure, texture, color, and sensory acceptance were studied. The combination of agave syrup with xanthan gum and doubled quantities of leavening agents affected (p < 0.05) rheological and microstructural properties of the batters and textural properties of the low-sucrose muffins compared to the controls. The increase in agave syrup levels resulted in a darker crumb and crust. Sensory evaluation showed that AS-75 and PHAS-75 were the best alternatives to the control samples. Our results suggest a plausible substitution of up to 75% of sucrose by agave syrup in preparation of muffins, with physical and sensorial characteristics similar to those of their sucrose-containing counterparts.

Dielectric Properties of Beverages (Tamarind and Green) Relevant to Microwave-Assisted Pasteurization.

Dielectric properties (DPs) of two beverages, tamarind and a green drink (based on mix fruits of pineapple, guava, lemon, and nopal), were studied. The DPs were determined using the open-ended coaxial probe method in the frequency range from 0.25 to 25 GHz at 10, 30, 50, and 70 °C. The dielectric constant decreased when both frequency and temperature increased above 1000 MHz. For both beverages, the dielectric loss factor increased with increasing frequency and increasing temperature. In addition, dielectric constant values ranged from 59.7 to 82.5, and the dielectric loss factors were between 5.8 and 31.1. The penetration depth (dp ) of electromagnetic waves in the beverages increased proportionally to temperature at frequencies above 1000 MHz; dp values ranged from 0.2 to 7.5 cm. Because of its complexity and the amount of ingredients and the interactions between them, the green drink showed higher values of dielectric constants in comparison with the tamarind beverage. PRACTICAL APPLICATION: The dielectric properties of the studied beverages, how they behave at different temperatures, and the penetration depth reached by microwave at the allocated frequencies, provide important parameters for further heating treatments, such as heating (microwave-assisted pasteurization) and for modeling/simulation purposes.

Electrically induced changes in amaranth seed enzymatic activity and their effect on bioactive compounds content after germination.

Electric treatment applied to seeds and sprouts can change their phytochemical composition. However, only a handful of studies have investigated the effects of treating seeds with electric current prior to their germination on the enzymatic antioxidant system of their sprouts. The aim of this study was to determine the changes in bioactive compounds and the enzymatic antioxidant activities in seeds and amaranth sprouts under direct electric current (DC) treatments. Amaranth seeds were treated with DC at 500 mA for different periods of time (0, 2, 5, 10 and 30 min) and let sprout (85% RH, 25 ± 2 °C) for 6 days. Significant changes were found in the antioxidant enzymatic activities and in the total content of flavonoids (15.44 ± 0.56 mg RE/gDW) and phenolic compounds (35.87 ± 0.17 mg GAE/gDW) in 6-day-old sprouts from DC-treated seeds in comparison to sprouts form non-treated seeds. The results suggested that DC treatment for short period (5 min) can induce quantitative changes to the enzymatic antioxidant system of amaranth sprouts, thus representing a relatively cost-effective method for enhancing health-improving properties of sprouts.

Cucurbitaceae Seed Protein Hydrolysates as a Potential Source of Bioactive Peptides with Functional Properties.

Seeds from Cucurbitaceae plants (squashes, pumpkins, melons, etc.) have been used both as protein-rich food ingredients and nutraceutical agents by many indigenous cultures for millennia. However, relatively little is known about the bioactive components (e.g., peptides) of the Cucurbitaceae seed proteins (CSP) and their specific effects on human health. Therefore, this paper aims to provide a comprehensive review of latest research on bioactive and functional properties of CSP isolates and hydrolysates. Enzymatic hydrolysis can introduce a series of changes to the CSP structure and improve its bioactive and functional properties, including the enhanced protein solubility over a wide range of pH values. Small-sized peptides in CSP hydrolysates seem to enhance their bioactive properties but adversely affect their functional properties. Therefore, medium degrees of hydrolysis seem to benefit the overall improvement of bioactive and functional properties of CSP hydrolysates. Among the reported bioactive properties of CSP isolates and hydrolysates, their antioxidant, antihypertensive, and antihyperglycaemic activities stand out. Therefore, they could potentially substitute synthetic antioxidants and drugs which might have adverse secondary effects on human health. CSP isolates and hydrolysates could also be implemented as functional food ingredients, thanks to their favorable amino acid composition and good emulsifying and foaming properties.

Influence of material structure on air-borne ultrasonic application in drying.

This work aims to contribute to the understanding of how the properties of the material being dried affect air-borne ultrasonic application. To this end, the experimental drying kinetics (40°C and 1m/s) of cassava (Manihot esculenta) and apple (Malus domestica var. Granny Smith) were carried out applying different ultrasonic powers (0, 6, 12, 19, 25 and 31 kW/m(3)). Furthermore, the power ultrasound-assisted drying kinetics of different fruits and vegetables (potato, eggplant, carrot, orange and lemon peel) already reported in previous studies were also analyzed. The structural, textural and acoustic properties of all these products were assessed, and the drying kinetics modeled by means of the diffusion theory. A significant linear correlation (r>0.95) was established between the identified effective diffusivity (DW) and the applied ultrasonic power for the different products. The slope of this relationship (SDUP) was used as an index of the effectiveness of the ultrasonic application; thus the higher the SDUP, the more effective the ultrasound application. SDUP was well correlated (r ⩾ 0.95) with the porosity and hardness. In addition, SDUP was largely affected by the acoustic impedance of the material being dried, showing a similar pattern with the impedance than the transmission coefficient of the acoustic energy on the interface. Thus, soft and open-porous product structures exhibited a better transmission of acoustic energy and were more prone to the mechanical effects of ultrasound. However, materials with a hard and closed-compact structure were less affected by acoustic energy due to the fact that the significant impedance differences between the product and the air cause high energy losses on the interface.

Improvement of water transport mechanisms during potato drying by applying ultrasound.

BACKGROUND: The drying rate of vegetables is limited by internal moisture diffusion and convective transport mechanisms. The increase of drying air temperature leads to faster water mobility; however, it provokes quality loss in the product and presents a higher energy demand. Therefore, the search for new strategies to improve water mobility during convective drying constitutes a topic of relevant research. The aim of this work was to evaluate the use of power ultrasound to improve convective drying of potato and quantify the influence of the applied power in the water transport mechanisms. RESULTS: Drying kinetics of potato cubes were increased by the ultrasonic application. The influence of power ultrasound was dependent on the ultrasonic power (from 0 to 37 kW m(-3) ), the higher the applied power, the faster the drying kinetic. The diffusion model considering external resistance to mass transfer provided a good fit of drying kinetics. From modelling, it was observed a proportional and significant (P < 0.05) influence of the applied ultrasonic power on the identified kinetic parameters: effective moisture diffusivity and mass transfer coefficient. CONCLUSIONS: The ultrasonic application during drying represents an interesting alternative to traditional convective drying by shortening drying time, which may involve an energy saving concerning industrial applications. In addition, the ultrasonic effect in the water transport is based on mechanical phenomena with a low heating capacity, which is highly relevant for drying heat sensitive materials and also for obtaining high-quality dry products.