Tuning the morphology and chemical distribution of Ag atoms in Au rich nanoparticles using electrochemical dealloying.

Dealloying of Ag-Au alloy nanoparticles (NPs) strongly differs from the corresponding bulk alloy materials. Here, we have investigated the effects of potentiodynamic and potentiostatic dealloying on structure and distribution of residual Ag atoms for Au rich NPs. Two different sizes of Ag rich alloy NPs, 77 ± 26 nm Ag77Au23 and 12 ± 5 nm Ag86Au14, were prepared. 77 nm Ag77Au23 NPs form a homogeneous alloy, while 12 nm Ag86Au14 NPs show an Ag rich shell-Au rich core arrangement. The two groups of as-prepared NPs were dealloyed either under potentiodynamic (0.2-1.3 VRHE) or potentiostatic (0.9, 1.2, and 1.6 VRHE) conditions in 0.1 M HClO4. For the initial 77 nm Ag77Au23 NPs, both dealloying protocols lead to pore evolution. Interestingly, instead of homogenous Ag distribution, numerous Ag rich regions form and locate near the pores and particle edges. The critical dealloying potential also differs by ∼500 mV depending on the dealloying method. The initial 12 nm Ag86Au14 NPs remain dense and solid, but Ag distribution and thickness of the Au passivation layer vary between both dealloying protocols. When the Au passivation layer is very thin, the residual Ag atoms tend to segregate to the particle surface after dealloying. Due to the size effect, small NPs are less electrochemically stable and show a lower critical dealloying potential. In this systematic study, we demonstrate that the mobility of Au surface atoms and dealloying conditions control the structure and residual Ag distribution within dealloyed NPs.

On the electrocatalytical oxygen reduction reaction activity and stability of quaternary RhMo-doped PtNi/C octahedral nanocrystals.

Recently proposed bimetallic octahedral Pt-Ni electrocatalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cell (PEMFC) cathodes suffer from particle instabilities in the form of Ni corrosion and shape degradation. Advanced trimetallic Pt-based electrocatalysts have contributed to their catalytic performance and stability. In this work, we propose and analyse a novel quaternary octahedral (oh-)Pt nanoalloy concept with two distinct metals serving as stabilizing surface dopants. An efficient solvothermal one-pot strategy was developed for the preparation of shape-controlled oh-PtNi catalysts doped with Rh and Mo in its surface. The as-prepared quaternary octahedral PtNi(RhMo) catalysts showed exceptionally high ORR performance accompanied by improved activity and shape integrity after stability tests compared to previously reported bi- and tri-metallic systems. Synthesis, performance characteristics and degradation behaviour are investigated targeting deeper understanding for catalyst system improvement strategies. A number of different operando and on-line analysis techniques were employed to monitor the structural and elemental evolution, including identical location scanning transmission electron microscopy and energy dispersive X-ray analysis (IL-STEM-EDX), operando wide angle X-ray spectroscopy (WAXS), and on-line scanning flow cell inductively coupled plasma mass spectrometry (SFC-ICP-MS). Our studies show that doping PtNi octahedral catalysts with small amounts of Rh and Mo suppresses detrimental Pt diffusion and thus offers an attractive new family of shaped Pt alloy catalysts for deployment in PEMFC cathode layers.

Engineering gold-platinum core-shell nanoparticles by self-limitation in solution.

Core-shell particles with thin noble metal shells represent an attractive material class with potential for various applications ranging from catalysis to biomedical and pharmaceutical applications to optical crystals. The synthesis of well-defined core-shell architectures remains, however, highly challenging. Here, we demonstrate that atomically-thin and homogeneous platinum shells can be grown via a colloidal synthesis method on a variety of gold nanostructures ranging from spherical nanoparticles to nanorods and nanocubes. The synthesis is based on the exchange of low binding citrate ligands on gold, the reduction of platinum and the subsequent kinetically hindered growth by carbon monoxide as strong binding ligand. The prerequisites for homogeneous growth are low core-binding ligands with moderate fast ligand exchange in solution, a mild reducing agent to mitigate homonucleation and a strong affinity of a second ligand system that can bind to the shell's surface. The simplicity of the described synthetic route can potentially be adapted to various other material libraries to obtain atomically smooth core-shell systems.

Engineering stable electrocatalysts by synergistic stabilization between carbide cores and Pt shells.

Core-shell particles with earth-abundant cores represent an effective design strategy for improving the performance of noble metal catalysts, while simultaneously reducing the content of expensive noble metals1-4. However, the structural and catalytic stabilities of these materials often suffer during the harsh conditions encountered in important reactions, such as the oxygen reduction reaction (ORR)3-5. Here, we demonstrate that atomically thin Pt shells stabilize titanium tungsten carbide cores, even at highly oxidizing potentials. In situ, time-resolved experiments showed how the Pt coating protects the normally labile core against oxidation and dissolution, and detailed microscopy studies revealed the dynamics of partially and fully coated core-shell nanoparticles during potential cycling. Particles with complete Pt coverage precisely maintained their core-shell structure and atomic composition during accelerated electrochemical ageing studies consisting of over 10,000 potential cycles. The exceptional durability of fully coated materials highlights the potential of core-shell architectures using earth-abundant transition metal carbide (TMC) and nitride (TMN) cores for future catalytic applications.

Controlled Assembly of Block Copolymer Coated Nanoparticles in 2D Arrays.

The defined assembly of nanoparticles (NPs) in polymer matrices is an important prerequisite for next-generation functional materials. A promising approach to control NP positions in polymer matrices at the nanometer scale is the use of block copolymers. It allows the selective deposition of NPs in nanodomains, but the final defined and ordered positioning of the NPs within the domains has not been possible. This can now be achieved by coating NPs with block copolymers. The self-assembly of block copolymer-coated NPs directly leads to ordered microdomains containing ordered NP arrays with exactly one NP per unit cell. By variation of the grafting density, the inter-nanoparticle distance can be controlled from direct NP surface contact to surface separations of several nanometers, determined by the thickness of the polymer shell. The method can be applied to a wide variety of block copolymers and NPs and is thus suitable for a broad range of applications.

High resolution transmission electron microscopy and electronic structure theory investigation of platinum nanoparticles on carbon black.

High Resolution Transmission Electron Microscopy (HR TEM) is used to identify the size, shape, and interface structure of platinum nanoparticles and carbon support of a fuel cell catalyst. Using these insights, models accessible to quantum chemical methods are designed in order to rationalize the observed features. Thus, basal plane and prism face models of the carbon black material are considered, interacting with Pt clusters of sizes up to 1 nm. Particular attention is paid to the electronic structure of the carbon support, namely, the radical character of graphene zig-zag edges. The results show that a stronger interaction is found when the nanoparticle is at the zig-zag edge of a basal plane due to the combination of dispersion interaction with the support structure and covalent interaction with carbon atoms at the edge. In this case, a distortion of both the Pt nanoparticle and the carbon support is observed, which corresponds to the observations from the HR TEM investigation. Furthermore, the analysis of the charge transfer upon interaction and the influence of the potential on the charge states and structure is carried out on our model systems. In all cases, a clear charge transfer is observed from the carbon support to the Pt nanoparticle. Finally, we show that changing the potential not only can change the charge state of the system but can also affect the nature of the interaction between Pt nanoparticles and carbon supports.

Formation of unexpectedly active Ni-Fe oxygen evolution electrocatalysts by physically mixing Ni and Fe oxyhydroxides.

We present an unusual, yet facile, strategy towards formation of physically mixed Ni-Fe(OxHy) oxygen evolution electrocatalysts. We use in situ X-ray absorption and UV-vis spectroscopy, and high-resolution imaging to demonstrate that physical contact between two inferior Ni(OH)2 and Fe(OOH) catalysts self-assemble into atomically intermixed Ni-Fe catalysts with unexpectedly high activity.

Shape-Controlled Nanoparticles in Pore-Confined Space.

Increasing the catalyst's stability and activity are one of the main quests in catalysis. Tailoring crystal surfaces to a specific reaction has demonstrated to be a very effective way in increasing the catalyst's specific activity. Shape controlled nanoparticles with specific crystal facets are usually grown kinetically and are highly susceptible to morphological changes during the reaction due to agglomeration, metal dissolution, or Ostwald ripening. A strong interaction of the catalytic material to the support is thus crucial for successful stabilization. Taken both points into account, a general catalyst design is proposed, combining the enhanced activity of shape-controlled nanoparticles with a pore-confinement approach for high stability. Hollow graphitic spheres with narrow and uniform bimodal mesopores serve as model system and were used as support material. As catalyst, different kinds of particles, such as pure platinum (Pt), platinum/nickel (Pt3Ni) and Pt3Ni doped with molybdenum (Pt3Ni-Mo), have exemplarily been synthesized. The advantages, limits and challenges of the proposed concept are discussed and elaborated by means of time-resolved, in and ex situ measurements. It will be shown that during catalysis, the potential boundaries are crucial especially for the proposed catalyst design, resulting in either retention of the initial activity or drastic loss in shape, size and elemental composition. The synthesis and catalyst design can be adapted to a wide range of catalytic reactions where stabilization of shape-controlled particles is a focus.