Oxidative removal of stabilized landfill leachate by Fenton's process: process modeling, optimization & analysis of degraded products.

In this study, the stabilized landfill leachate which has a BOD : COD ratio of 0.045 was treated using Fenton's process. The effect of process parameters like reaction time, pH, dose of FeSO4 and dose of H2O2 was estimated using One Factor At a Time (OFAT) and the linear, interactive and quadratic effects between the factors were studied using Face Centered Central Composite Design (CCF). In the OFAT approach, reaction time: 5 minutes, pH: 3.0, dose of FeSO4: 30 mM, and dose of H2O2: 30 mM were optimized. In CCF, the statistically optimized model shows maximum removal of organic substances at an FeSO4 concentration of 14.44 mM, pH 3.0 and 29.12 mM of H2O2. The regression co-efficient R 2 = 0.9079, adj R 2 = 0.854 and adequate precision = 14.676. The degradation of organic substances was assessed by measuring the Chemical Oxygen Demand (COD). Total Organic Carbon (TOC) and Gas Chromatography-Mass Spectroscopy (GC-MS) were investigated for the sample corresponding to the maximum COD reduction.

Optimisation of radiolysis of Reactive Red 120 dye in aqueous solution using ionising (60)Co gamma radiation by response surface methodology.

In recent years, employing radiation technology is gaining great interest in degradation of industrial effluents. In this work the possibility of using gamma irradiation to degrade Reactive Red 120 (C.I.292775) was explored. The effects of pH, dose of gamma irradiation and concentration of dye were examined and their interaction were also established based on their response. For the analysis and optimisation of variables, three factor three level Box-Wilson face centred central composite design (CCF) was used. Analysis of variance with R(2) = 0.9988, adjusted R(2) = 0.9981 and the adequate precision value of 122.303 indicates that the CCF model can be used. The coefficient of variation (0.54%) indicates the reliability of the model. The dose of gamma irradiation (kGy) and the concentration of dye (mg/L) showed significant effects on the degradation of RR 120, while a difference of 6 to 10% degradation was observed in extending the pH towards the acid or alkali range from pH 7.00. The maximum concentration of dye degraded was observed as 347.509 mg/L at initial pH: 7.0, dose of gamma irradiation: 5.94 kGy and initial concentration of dye: 500 mg/L. This predicted value was found to be in agreement with the experimental value on the optimised conditions.

Kinetic studies on degradation of Reactive Red 120 dye in immobilized packed bed reactor by Bacillus cohnii RAPT1.

The degradation of Reactive Red 120 using Bacillus cohnii RAPT1 immobilized on polyurethane was studied. Initial experiments indicated that the percentage removal of dye in immobilized batch was significantly higher than batch (without immobilization). The optimum process parameters such as effect of dye concentration, time of immobilization on Poly Urethane Foam, initial inoculum size, pH and temperature for removal of dye were investigated and was found as 200ppm, 36h, 300*10(6) colony forming units/ml, 8.0 and 35°C respectively. Under optimum conditions, 100% removal of dye was obtained within 4h. The kinetics of biodegradation for the batch with free cells and immobilised packed batch was found to be IInd order with kinetic constant and initial rate of reaction as 0.0408, 0.084L/(mgday) and 1632, 3360 (mg/Lday) respectively.