RESUMEN
1D Ca3Co2-z M z O6 (M = Co z = 0, M = Mn z = 1, and M = Fe z = 0.4) were prepared and tested electrochemically. While the iron-containing phase was not found to be active, the iron- and manganese-containing phases were found to be potentially interesting as positive electrode materials for calcium metal-based high-energy battery technologies and were investigated by operando synchrotron X-ray diffraction. Results indicate that electrochemically driven calcium deintercalation from the crystal structure (ca. 0.7 mol per formula unit) takes place upon oxidation in both cases. The oxidized phases have incommensurate modulated crystal structures with the space group R 3m(00γ)0s and a = 9.127(1) Å, c 1 = 2.4226(3) Å and c 2 = 4.1857(3) Å, and γ = 0.579 (M = Co) and a = 9.217(1) Å, c 1 = 4.9076(4) Å and c 2 = 4.3387(4) Å, and γ = 1.139 (M = Mn), which exhibit differences due to the presence of manganese and Mn/Co ordering. The degree of calcium re-intercalation within the structure was found to be extremely limited, if any. Complementary experiments carried out in lithium cells did not show any reversibility either, thus pointing at intrinsic structural/migration constraints in the oxidized phase rather than slow kinetics of high desolvation energies associated with divalent ion charge carriers.
RESUMEN
Layered MgMoN2 was prepared by solid state reaction at high temperature between Mo and Mg3N2 in N2 which represents a simple synthetic pathway compared to the previously reported method that used NaN3 as the nitrogen source. The crystal structure of MgMoN2 was studied by synchrotron X-ray and neutron powder diffraction. The feasibility of oxidizing this compound and concomitantly extracting magnesium from the structure was assessed by both chemical and electrochemical approaches, using different protocols. The X-ray diffraction patterns of the oxidized samples do not exhibit any relevant difference with respect to that of the as prepared MgMoN2 and no differences in the cell parameters are deduced from Rietveld refinements. No hints pointing at the presence of any amorphous phase are observed either. These results are rationalized through DFT calculated energy barriers for Mg2+ ion migration in MgMoN2.
RESUMEN
Basic electrochemical characteristics of CaMO3 perovskites (M = Mo, Cr, Mn, Fe, Co, and Ni) as cathode materials for Ca ion batteries are investigated using first principles calculations at the Density Functional Theory level (DFT). Calculations have been performed within the Generalized Gradient Approximation (GGA) and GGA+U methodologies, and considering cubic and orthorhombic perovskite structures for CaxMO3 (x = 0, 0.25, 0.5, 0.75 and 1). The analysis of the calculated voltage-composition profile and volume variations identifies CaMoO3 as the most promising perovskite compound. It combines good electronic conductivity, moderate crystal structure modifications, and activity in the 2-3 V region with several intermediate CaxMoO3 phases. However, we found too large barriers for Ca diffusion (around 2 eV) which are inherent to the perovskite structure. The CaMoO3 perovskite was synthesized, characterized and electrochemically tested, and results confirmed the predicted trends.
RESUMEN
Battery failure and gradual performance degradation (aging) are the result of complex interrelated phenomena that depend on battery chemistry, design, environment, and the actual operation conditions. The current available knowledge on these matters results from a vast combination of experimental and modeling approaches. We explore the state of the art with respect to materials as well as usage (temperature, charge/discharge rate, etc.) for lead-acid, nickel-cadmium, nickel-metal hydride, and lithium-ion chemistries. Battery diagnosis strategies and plausible developments related to large-scale battery applications are also discussed.
RESUMEN
The development of a rechargeable battery technology using light electropositive metal anodes would result in a breakthrough in energy density. For multivalent charge carriers (M(n+)), the number of ions that must react to achieve a certain electrochemical capacity is diminished by two (n = 2) or three (n = 3) when compared with Li(+) (ref. ). Whereas proof of concept has been achieved for magnesium, the electrodeposition of calcium has so far been thought to be impossible and research has been restricted to non-rechargeable systems. Here we demonstrate the feasibility of calcium plating at moderate temperatures using conventional organic electrolytes, such as those used for the Li-ion technology. The reversibility of the process on cycling has been ascertained and thus the results presented here constitute the first step towards the development of a new rechargeable battery technology using calcium anodes.
RESUMEN
We report the direct synthesis of powder Na3Ti2(PO4)3 together with its low-potential electrochemical performance and crystal structure elucidation for the reduced and oxidized phases. First-principles calculations at the density functional theory level have been performed to gain further insight into the electrochemistry of Ti(IV)/Ti(III) and Ti(III)/Ti(II) redox couples in these sodium superionic conductor (NASICON) compounds. Finally, we have validated the concept of full-titanium-based sodium ion cells through the assembly of symmetric cells involving Na3Ti2(PO4)3 as both positive and negative electrode materials operating at an average potential of 1.7 V.
