RESUMEN
Heterogeneous electrode materials possess abundant heterointerfaces with a localized "space charge effect", which enhances capacity output and accelerates mass/charge transfer dynamics in energy storage devices (ESDs). These promising features open new possibilities for demanding applications such as electric vehicles, grid energy storage, and portable electronics. However, the fundamental principles and working mechanisms that govern heterointerfaces are not yet fully understood, impeding the rational design of electrode materials. In this study, the heterointerface evolution during charging and discharging process as well as the intricate interaction between heterointerfaces and charge/mass transport phenomena, is systematically discussed. Guidelines along with feasible strategies for engineering structural heterointerfaces to address specific challenges encountered in various application scenarios, are also provided. This review offers innovative solutions for the development of heterogeneous electrode materials, enabling more efficient energy storage beyond conventional electrochemistry. Furthermore, it provides fresh insights into the advancement of clean energy conversion and storage technologies. This review contributes to the knowledge and understanding of heterointerfaces, paving the way for the design and optimization of next-generation energy storage materials for a sustainable future.
RESUMEN
In recent years, there have been significant advancements in Al-ion battery development, resulting in high voltage and capacity. Traditionally, only carbon-based materials with layered structures and strong bonding capabilities can deliver superior performance. However, most other materials exhibited low discharge voltages of 1.4 V, especially in aqueous Al-ion battery systems lacking anion intercalation. Thus, the development of high-voltage cathode materials has become crucial. This study introduces 2D MoS2 as a high-performance cathode for aqueous Al-ion batteries. The material's interlayer structure enables the intercalation of AlCl4 - anions, resulting in high-voltage intercalation. The resulting battery achieved a high voltage of 1.8 V with a capacity of 750 mAh g-1 , contributing to a high energy density of 890 Wh kg-1 and an impressive retention rate of ≈100% after 200 cycles. This research not only sheds light on the high-voltage anion-intercalation mechanism of MoS2 but also paves the way for the further development of advanced cathode materials in the field of Al-ion batteries. By demonstrating the potential of using 2D MoS2 as a cathode material, this finding can lead to the development of more efficient and innovative energy storage technologies, ultimately contributing to a sustainable and green energy future.
RESUMEN
Mg-ion batteries offer a safe, low-cost, and high-energy density alternative to current Li-ion batteries. However, nonaqueous Mg-ion batteries struggle with poor ionic conductivity, while aqueous batteries face a narrow electrochemical window. Our group previously developed a water-in-salt battery with an operating voltage above 2 V yet still lower than its nonaqueous counterpart because of the dominance of proton over Mg-ion insertion in the cathode. We designed a quasi-solid-state magnesium-ion battery (QSMB) that confines the hydrogen bond network for true multivalent metal ion storage. The QSMB demonstrates an energy density of 264 W·hour kg-1, nearly five times higher than aqueous Mg-ion batteries and a voltage plateau (2.6 to 2.0 V), outperforming other Mg-ion batteries. In addition, it retains 90% of its capacity after 900 cycles at subzero temperatures (-22°C). The QSMB leverages the advantages of aqueous and nonaqueous systems, offering an innovative approach to designing high-performing Mg-ion batteries and other multivalent metal ion batteries.
RESUMEN
Aqueous Al-ion battery (AAIB) is regarded as a promising candidate for large-scale energy storage systems due to its high capacity, high safety, and low cost, with MnO2 proved to be a high-performance cathode. However, the potential commercial application of this type of battery is plagued by the frequent structural collapse of MnO2 . Herein, an in situ, electrochemically reformed, urchin-like Alx MnO2 cathode is developed for water-in-salt electrolyte-based AAIBs. Benefiting from its unique α-MnO2 coated Mn2 AlO4 structure, a high Al ion storage capacity is achieved together with a high discharge voltage plateau of 1.9 V by reversible MnO2 electrolysis. Consequently, the battery exhibits a high specific capacity of 285 mAh g-1 and a high energy density of 370 Wh kg-1 at a high current density of 500 mA g-1 . Improved stability with record capacity retention is also obtained at an ultrahigh current density of 5 A g-1 after 500 cycles. Such a high-capacity and high-stability Alx MnO2 cathode would pave the way for in situ electrochemical transformation of cathode design and thus boost the practical application of AAIBs.