RESUMEN
The Au partially embedded nanostructure (PEN) is synthesized by ion irradiation on an Au thin film deposited on a glass substrate using a 50 keV Ar ion. Scanning electron microscopy results show ion beam-induced restructuring from irregularly shaped nanostructures (NSs) to spherical Au NSs, and further ion irradiation leads to the formation of well-separated spherical nanoparticles. Higuchi's algorithm of surface analysis is utilized to find the evolution of surface morphology with ion irradiation in terms of the Hurst exponent and fractal dimension. The Au PEN is evidenced by Rutherford backscattering spectrometry and optical studies. Also, the depth of the mechanism behind synthesized PEN is explained on the basis of theoretical simulations, namely, a unified thermal spike and a Monte Carlo simulation consisting of dynamic compositional changes (TRIDYN). Another set of plasmonic NSs was formed on the surface by thermal annealing of the Au film on the substrate. Glucose sensing has been studied on the two types of plasmonic layers: nanoparticles on the surface and PEN. The results reveal the sensing responses of both types of plasmonic layers. However, PEN retains its plasmonic behavior as the NSs are still present after washing with water, which demonstrates the potential for reusability. RESEARCH HIGHLIGHTS: Synthesis of PENs by ion irradiation Utilization of Higuchi's algorithm to explore the surface morphology. Unified thermal spike and TRIDYN simulations being used to explain the results. Glucose is only used as a test case for reusability of substrate.
RESUMEN
We present the morphological evolution and fractal characterizations of CaF2 thin-film surfaces modified by bombardment with 100 MeV Au+8 ions at various fluences. Atomic force microscopy (AFM) combined with line profile and two-dimensional power spectral density (2D-PSD) analysis was utilized to investigate the evolution of surface morphology as a function of fluence. The AFM images were utilized to investigate the relationship between fractal dimension, roughness exponent, lateral correlation length, and ion fluence. The surface erosion owing to sputtering was depicted using Rutherford backscattering spectrometry. The structural characteristics' dependency on fluence was explored with the help of glancing angle x-ray diffraction measurements on virgin and irradiated samples. Tensile stress calculated using a peak shift in the glancing angle x-ray diffractogram showed an increase in tensile stress with fluence that caused the surface to crack after the fracture strength of the surface was crossed. 2D-PSD analysis signified the role of sputtering over surface diffusion for the observed surface modifications. Fractal dimensions first increased and then decreased with ion fluence. The lateral correlation length decreased, while the roughness exponent increased with fluence after the threshold value.
RESUMEN
Respiratory syncytial virus (RSV) is a global public health burden for which no licensed vaccine exists. To aid vaccine development via increased understanding of the protective antibody response to RSV prefusion glycoprotein F (PreF), we performed structural and functional studies using the human neutralizing antibody (nAb) RSB1. The crystal structure of PreF complexed with RSB1 reveals a conformational, pre-fusion specific site V epitope with a unique cross-protomer binding mechanism. We identify shared structural features between nAbs RSB1 and CR9501, elucidating for the first time how diverse germlines obtained from different subjects can develop convergent molecular mechanisms for recognition of the same PreF site of vulnerability. Importantly, RSB1-like nAbs were induced upon immunization with PreF in naturally-primed cattle. Together, this work reveals new details underlying the immunogenicity of site V and further supports PreF-based vaccine development efforts.
Asunto(s)
Anticuerpos Antivirales/inmunología , Epítopos/inmunología , Inmunogenicidad Vacunal/inmunología , Infecciones por Virus Sincitial Respiratorio/inmunología , Vacunas contra Virus Sincitial Respiratorio/inmunología , Virus Sincitiales Respiratorios/inmunología , Proteínas Virales de Fusión/inmunología , Animales , Anticuerpos Neutralizantes/inmunología , Bovinos , Cristalografía por Rayos X , Humanos , Inmunización , Modelos EstructuralesRESUMEN
Hydrogen-deuterium exchange mass spectrometry (HDX-MS) is an established, powerful tool for investigating protein-ligand interactions, protein folding, and protein dynamics. However, HDX-MS is still an emergent tool for quality control of biopharmaceuticals and for establishing dynamic similarity between a biosimilar and an innovator therapeutic. Because industry will conduct quality control and similarity measurements over a product lifetime and in multiple locations, an understanding of HDX-MS reproducibility is critical. To determine the reproducibility of continuous-labeling, bottom-up HDX-MS measurements, the present interlaboratory comparison project evaluated deuterium uptake data from the Fab fragment of NISTmAb reference material (PDB: 5K8A ) from 15 laboratories. Laboratories reported â¼89â¯800 centroid measurements for 430 proteolytic peptide sequences of the Fab fragment (â¼78â¯900 centroids), giving â¼100% coverage, and â¼10â¯900 centroid measurements for 77 peptide sequences of the Fc fragment. Nearly half of peptide sequences are unique to the reporting laboratory, and only two sequences are reported by all laboratories. The majority of the laboratories (87%) exhibited centroid mass laboratory repeatability precisions of ⟨ sLab⟩ ≤ (0.15 ± 0.01) Da (1σxÌ ). All laboratories achieved ⟨sLab⟩ ≤ 0.4 Da. For immersions of protein at THDX = (3.6 to 25) °C and for D2O exchange times of tHDX = (30 s to 4 h) the reproducibility of back-exchange corrected, deuterium uptake measurements for the 15 laboratories is σreproducibility15 Laboratories( tHDX) = (9.0 ± 0.9) % (1σ). A nine laboratory cohort that immersed samples at THDX = 25 °C exhibited reproducibility of σreproducibility25C cohort( tHDX) = (6.5 ± 0.6) % for back-exchange corrected, deuterium uptake measurements.
Asunto(s)
Anticuerpos Monoclonales/química , Espectrometría de Masas de Intercambio de Hidrógeno-Deuterio , Fragmentos Fab de Inmunoglobulinas/análisisRESUMEN
Surface re-organization in nanodimensional fluoride (LiF and BaF2) thin films is observed under dense electronic excitation produced by swift heavy ion (SHI) irradiation. The irradiation was performed at an angle of less than 15° with respect to the film surface while keeping the sample at liquid nitrogen temperature. The surface of the irradiated samples was characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM) complemented by energy dispersive X-ray spectroscopy (EDX). Detailed analyses indicate that the surface starts cracking at lower fluence. With an increase in the ion fluence, the materials shrinking and surface re-structuring lead to lamellae periodic structures. The average width of the wall decreases, while the separation and the height of the structures increase with the fluence. The composition of the lamellae walls and the gap in between were analyzed by EDX. At the highest fluence of irradiation, a strong signal of the substrate and negligible signals of F and Ba are observed between the walls of the lamellae structures, which shows that the entire deposited material is removed and the Si substrate is completely exposed to the ion beam. It is also observed that the substrate remains unaffected by SHI irradiation and does not undergo any structural transformation as evident by cross-sectional SEM micrographs. Such surface re-organization is not expected in fluoride thin films due to their non-amorphizable nature even at very high fluence SHI irradiation. The concept of grain rotation under SHI irradiation is used to explain the re-organization phenomena in such non-amorphizable materials.
RESUMEN
A new analytical method has been developed for the quantitative determination of ethylene glycol-containing nonionic surfactants, such as polyethylene glycol 8000, polysorbate 80, and Pluronic F-68. These surfactants are commonly used in pharmaceutical protein preparations, thus, testing in the presence of protein is required. This method is based on the capillary gas chromatographic analysis of ethylene glycol diacetate formed by hydrolysis and acetylation of surfactants that contain ethylene glycol. Protein samples containing free surfactants were hydrolyzed and acetylated with acetic anhydride in the presence of p-toluene sulfonic acid. Acetylated ethylene glycol was extracted with dichloromethane and analyzed by gas chromatography using a flame ionization detector. The amount of nonionic surfactant in the sample was determined by comparing the released ethylene glycol diacetate signal to that measured from calibration standards. The limits of quantitation of the method were 5.0 µg/mL for polyethylene glycol 8000 and Pluronic F-68, and 50 µg/mL for polysorbate 80. This method can be applied to determine the polyethylene glycol content in PEGylated proteins or the final concentration of polysorbate 80 in a protein drug in a quality control environment.
Asunto(s)
Glicol de Etileno/química , Proteínas/análisis , Tensoactivos/química , Tampones (Química) , Calibración , Cromatografía de Gases y Espectrometría de Masas , Hidrólisis , Iones , Cloruro de Metileno/química , Poloxámero/química , Polietilenglicoles/química , Polisorbatos/química , Control de Calidad , Reproducibilidad de los Resultados , Espectrometría de Masa por Láser de Matriz Asistida de Ionización DesorciónRESUMEN
The surface chemistry of GaAs (100) with 50-keV Ar+ ion beam irradiation at off-normal incidence has been investigated in order to elucidate the surface nano-structuring mechanism(s). Core level and valence band studies of the surface composition were carried out as a function of fluences, which varied from 1 × 1017 to 7 × 1017 ions/cm2. Core-level spectra of samples analyzed by X-ray photoelectron spectroscopy confirmed the Ga enrichment of the surface resulting in bigger sized nano-dots. Formation of such nano-dots is attributed to be due to the interplay between preferential sputtering and surface diffusion processes. Valence band measurement shows that the shift in the Fermi edge is higher for Ga- rich, bigger sized nano-dots due to the partial oxide formation of Ga. 'One-dimensional power spectral density' extracted from atomic force micrographs also confirms the significant role of surface diffusion in observed nano-structuring.