Flaxseed Mucilage/Hydroxypropyl Methylcellulose and Sodium Alginate/Polyvinyl Alcohol Composite Bilayer Film as a Promising Drug Carrier for Periodontal Treatment.

Objectives: The present study focused on the formulation of mucoadhesive bilayer composite films for the treatment of periodontitis and evaluation of their physicochemical properties. Materials and Methods: The solvent casting technique was used to prepare films. The primary layer (D) was prepared with flaxseed and hydroxypropyl methylcellulose composite to sustain the release of doxycycline hyclate. The second layer (S) comprised sodium alginate and polyvinyl alcohol composite for faster release of clove oil. Both layers were combined to generate the bilayer film (B). All formulations were characterized further to obtain an optimized formulation. Results: Attenuated total reflection-Fourier transform infrared radiation results showed intactness of drug and clove oil in the presence of excipients. The pH of the films was compatible with the periodontal cavity and the thickness was suitable for inserting into the cavity. The immediate release layer showed faster disintegration and swelling. The content of clove oil was above 80%. The rate of swelling of the primary layer was slow and drug content complied with the United States Pharmacopoeia. Scanning electron microscope analysis revealed intact, non-porous and smooth films. Films exhibited better mechanical strength and bioadhesiveness. Clove oil was released from the immediate release layer within 10 min, and doxycycline hyclate release was retarded to a minimum of up to 8 h in the primary layer as well as the bilayer. Formulation also had a significant effect on both Escherichia coli and Staphylococcus aureus. Conclusion: In the current study, bilayers were successfully prepared and characterized. The optimized formulation can be effectively used for the treatment of periodontitis.

Optimizing fluconazole-embedded transfersomal gel for enhanced antifungal activity and compatibility studies.

Fungal infections are of major concern all over the globe, and fluconazole is the most prevalently used drug to treat it. The goal of this research work was to formulate a fluconazole-embedded transfersomal gel for the treatment of fungal infections. A compatibility study between fluconazole and soya lecithin was performed by differential scanning calorimetry (DSC). Transfersomes were formulated by a thin-film hydration technique using soya lecithin and Span 80. A central composite design was adopted to prepare different formulations. Soya lecithin and Span 80 were chosen as independent variables, and the effect of these variables was studied on in vitro drug diffusion. Formulations were evaluated for entrapment efficiency and in vitro drug diffusion. The results of in vitro drug diffusion were analyzed using the analysis of variance (ANOVA) test. Optimized formulation was prepared based on the overlay plot and evaluated by scanning electron microscopy, DSC, vesicle size, polydispersity index (PDI), zeta potential, and in vitro drug diffusion studies. An optimized formulation was loaded into xanthan gum gel base and evaluated for pH, viscosity, in vitro and ex vivo drug diffusion, and antifungal activity. DSC studies revealed compatibility between fluconazole and soya lecithin. Entrapment efficiency and in vitro drug diffusion of various formulations ranged between 89.92% ± 0.20% to 97.28% ± 0.42% and 64% ± 1.56% to 85% ± 2.05%, respectively. A positive correlation was observed between in vitro drug diffusion and Span 80; conversely, a negative correlation was noted with soya lecithin. Entrapment efficiency, particle size, zeta potential, PDI, and drug diffusion of optimized formulation were 95.0% ± 2.2%, 397 ± 2 nm, -38 ± 5 mV, 0.43%, and 81 % ± 2%, respectively. SEM images showed well-distributed spherical-shaped transfersomes. In vitro, ex vivo drug diffusion and antifungal studies were conclusive of better diffusion and enhanced antifungal potential fluconazole in transfersomal formulation.

A chitosan film containing quercetin-loaded transfersomes for treatment of secondary osteoporosis.

Osteoporosis, due to its prevalence worldwide, is a serious health problem. Topical administration of quercetin, a phytoestrogen, in the form of deformable transfersomes, could be used to treat osteoporosis to overcome its low oral solubility and bioavailability. Formulation process of transfersomes was screened by fractional factorial design and further optimized using full factorial design. Transfersomes showed good characteristics such as entrapment efficiency, particle size, zeta potential, and polydispersity index (83.0 ± 2.2%, 75.95 ± 2 nm, - 13.6 ± 6 mv and 0.333, respectively). Transfersomes were further loaded into chitosan film and showed good permeation through rat skin. Further, glucocorticoid-induced osteoporosis rat model showed induction of osteoporosis after day 30. On day 45, treatment with chitosan film containing quercetin-loaded transfersomes showed remarkable rise in femur thickness, length, density as well as in serum biochemical parameters such as calcium, phosphorous, alkaline phosphatase, and tartrate-resistant alkaline phosphatase compared to positive control group. Tensile strength of osteoporotic femur bone was also found to be increased and was comparable with normal group. Histomicrographic analysis of femur bone exhibited less disruptive and lytic changes. Thus, all the above findings indicated the beneficial effects of quercetin-loaded transfersome chitosan film, due to decline in osteoclastogenesis and osteoblast apoptosis, which further favored increase in osteoblast numbers and mineralization of bones. Thus, chitosan film containing quercetin-loaded transfersomes was found to be good alternative to oral administration of quercetin to treat osteoporosis, while easy applicability of film in the form of wrist band anytime, anywhere, and even at work achieve patient compliance. Graphical abstract.

Spongy wound dressing of pectin/carboxymethyl tamarind seed polysaccharide loaded with moxifloxacin beads for effective wound heal.

An attempt was made to formulate moxifloxacin loaded alginate beads incorporated into spongy wound dressing to heal chronic wounds as well as to reduce frequency of painful dressing change. Moxifloxacin loaded beads (sodium alginate:pectin, 1:1) were prepared by ionic gelation method, with entrapment efficiency 94.52%, crushing strength 25.30 N and drug release 90.52%. Beads were further incorporated into wound dressing, made of pectin and carboxymethyl tamarind seed polysaccharide (CMTSP). Spongy wound dressing was obtained by freeze drying technology, which showed good folding endurance, high wound fluid absorption and good crushing strength. Drug release was found to be 85.09%. Dressing made of CMTSP:pectin (1.5:2) showed good water vapour transmission and antibacterial activity. Porous nature of dressing absorbed exudates of wound. Excision wound model in rats revealed wound healing within 17 days: groups I (control), II (moxifloxacin beads loaded wound dressing), III (moxifloxacin beads), IV (pectin film) and V (sodium alginate film) showed 65.28, 99.09, 86.90, 66.84 and 64.30% wound closure, respectively. To conclude, moxifloxacin beads loaded spongy wound dressing has good healing and wound closing potential compared to pectin film and moxifloxacin beads. Thus, the formulation is novel for biomedical application which reduced the frequency of painful dressing change.

Curcumin as a permeability enhancer enhanced the antihyperlipidemic activity of dietary green tea extract.

BACKGROUND: Green tea has polyphenols like flavonoids and catechins; mainly epigallocatechin-3-gallate (EGCG), epicatechin gallate (ECG), epigallocatechin (EGC) and epicatechin (EC), out of which EGCG is of higher abundance. EGCG has shown preventive role in hypercholesterolemia. However, due to low oral bioavailability, a need arises to improve its membrane permeability and transporter-mediated intestinal efflux. Therefore, an attempt was made to enhance permeability and bioavailability of EGCG using curcumin to treat hyperlipidemia. Further, it was formulated in herbal tea bags to achieve patient compliance. METHODS: EGCG extracted from green tea leaves was confirmed by High Performance Thin Layer Chromatography. Green tea extract (GTE), curcumin and their mixtures were subjected to Fourier Transform Infra-Red spectroscopy and Differential Scanning Calorimetry for compatibility studies. Powder formulation was prepared comprising GTE, curcumin, sucralose and cardamom. RESULTS: Ex-vivo study was performed on everted goat intestine, analyzed by HPLC and demonstrated highest permeation of GTE:curcumin (220:50) (53.15%) than GTE (20.57%). Antihyperlipidemic activity was performed in rats for 15 days. Blood sample analysis of rats of test groups (formulation and GTE solution) fed on high fat diet showed (mg/dl):cholesterol 80 and 90, triglycerides 73.25 and 85.5, HDL 50.75 and 46, LDL 43.9 and 46, VLDL 14.65 and 17.1 respectively with significant lipid regulating effect. CONCLUSION: Curcumin enhanced permeability of EGCG. Therefore, P-glycoprotein pump inside intestine can be potential mechanism to enhance permeability of EGCG. Thus, EGCG-curcumin herbal tea bag is promising nutraceutical to treat hyperlipidemia in day-to-day life achieving patient compliance.

Nebivolol-Loaded Microsponge Gel for Healing of Diabetic Wound.

An attempt was made to formulate nebivolol-loaded microsponge gel to access drug at wound area, incorporated into gel that possess optimum moist wound management environment during later stages of wound closure. Nebivolol, antihypertensive drug, exhibits vasodilating effects via nitric oxide pathway, slows diabetic neuropathy, and restores endothelial function in diabetic wounds. Microsponges were prepared by optimizing independent variables; drug to polymer ratio and internal phase volume and their effects on production yield, entrapment efficiency, and particle size. Formulations of microsponges were evaluated for drug content. Differential scanning calorimetry indicated reduction in crystallinity of NB during the formation of microsponges. In vitro study (drug to polymer 1:4 and 10 ml internal phase volume acetone) showed 80% drug released within 8 h. Spherical and porous microsponges confirmed by scanning electron microscopy were incorporated in the carbopol 934 (2%) gel base. Gel was characterized for pH, viscosity, and drug content. Less spreadability determined by texture analyzer demonstrated viscous nature of gel. In vitro diffusion study revealed entrapped drug in porous microsponges with slow release to heal wound. In vivo study performed using streptozotocin-induced diabetic rats and excision wound model showed wound healing and closure activity within day 10. Histology revealed inflammatory cell infiltrations and neovascularization in granulation tissues, ultimately healing wound. Microsponge gel prolonged drug release due to entrapped form in porous structure of microsponges with significant and fast wound healing and closure in diabetic rats. Microsponges with loaded drug fulfilled accessibility at wound area, while gel provided optimum moist wound management environment during later stages of wound closure.

Xyloglucan Based In Situ Gel of Lidocaine HCl for the Treatment of Periodontosis.

The present study was aimed at formulating thermoreversible in situ gel of local anesthetic by using xyloglucan based mucoadhesive tamarind seed polysaccharide (TSP) into periodontal pocket. Temperature-sensitive in situ gel of lidocaine hydrochloride (LH) (2% w/v) was formulated by cold method. A full 3(2) factorial design was employed to study the effect of independent variables concentrations of Lutrol F127 and TSP to optimize in situ gel. The dependent variables evaluated were gelation temperature (Y 1) and drug release (Y 2). The results revealed the surface pH of 6.8, similar to the pH of saliva. Viscosity study showed the marked increase in the viscosity of gel at 37°C due to sol-gel conversion. TSP was found to act as good mucoadhesive component to retain gel at the site of application in dental pocket. Gelation of formulation occurred near to body temperature. In vitro study depicted the fast onset of drug action but lasting the release (90%) till 2 h. Formulation F7 was considered as optimized batch, containing 18% Lutrol F127 and 1% tamarind seed polysaccharide. Thus, lidocaine hydrochloride thermoreversible in situ gel offered an alternative to painful injection therapy of anesthesia during dental surgery, with fast onset of anesthetic action lasting throughout the dental procedure.

Formulation of Eco-friendly Medicated Chewing Gum to Prevent Motion Sickness.

An attempt was made to formulate medicated chewing gum to prevent motion sickness using natural gum base for faster onset of action and easy administration, anywhere and anytime, without access to water. To avoid the discard issue of gum cud, natural gum base of Triticum aestivum (wheat grain) was explored because of its biodegradable and biocompatible nature and easy availability. Prolamin, extracted from wheat, showed good chewing capacity, elasticity, high water retention capacity, antifungal activity, and compatibility with the drug. Formulations were prepared based on a two-factor and three-level factorial design. Amount of calcium carbonate (texturizer) and gum base were selected as independent variables. Elasticity and drug release were considered as the dependent variables. All batches were evaluated for the content uniformity, elasticity study, texture study, in vitro drug release study, and chewiness study. Results revealed that medicated chewing gum containing 80 mg of calcium carbonate and 500 mg of gum base showed good elasticity and more than 90% drug release within 16 min. Thus, this study suggested that both good elasticity and chew ability and abundant availability of wheat grain can act as a potential gum base for medicated chewing gum.

Development and in vitro evaluation of sustained release multiparticulate tablet of freely water soluble drug / Desenvolvimento e avaliação in vitro de liberação sustentada de comprimido multi partículas livre de drogas solúveis em água

Blends of aqueous dispersion of a hydrophobic and hydrophilic polymer, namely Surelease®: hydroxypropyl methylcellulose (Surelease®: HPMC E15) were used as coating materials to control the drug release from coated pellets of the highly water soluble drug metoprolol succinate. Varying the polymer blends, ranges of drug release patterns were obtained at pH 6.8. The present study dealt with diffusion of drug through plasticized Surelease®/ hydroxypropyl methylcellulose (HPMC E15) films prepared by coating of drug and polymers onto non-pareil seeds using the solution layering technique. The release of metoprolol succinate from coated pellets was decreased with increased coating load of polymer. The optimized formulation was obtained by 3² full factorial design. The release profile revealed that the optimized formulation follows zero order release kinetics. The stability data showed no interaction for storage at 25ºC and 60 percent relative humidity.

Misturas das dispersões aquosas de polímero hidrofóbico e de polímero hidrofílico, a saber, Surelease®: hidroxipropil metilcelulose (Surelease®: HPMC E15), foram utilizadas como material de revestimento para controlar a liberação de fármacos de péletes revestidos de fármaco altamente solúvel, o succinato de metoprolol. Variando as misturas de polímeros, obtiveram-se faixas de padrão de liberação do fármaco em pH 6,8. O presente estudo tratou da difusão do fármaco através de filmes de Surelease®/hidroxipropil metilcelulose(HPMC E15), preparados pelo revestimento do fármaco e dos polímeros em sementes nonpareil, utilizando técnica de solução em camada. A liberação de succinato de metoprolol dos péletes revestidos diminuiu com o aumento da carga de polímero de revestimento. A formulação otimizada foi obtida por planejamento fatorial 3². O perfil de liberação revelou que a formulação otimizada segue a cinética de liberação de ordem zero. Os dados de estabilidade mostraram não haver interação por armazenamento a 25 ºC e umidade relativa de 60 por cento.