RESUMEN
OBJECTIVES: Stereotactic radiosurgery (SRS) refers to an advanced radiotherapy technique that requires a high level of precision and accuracy and a flawless workflow. Failures within the SRS process can lead to serious consequences due to high doses delivered per treatment. This narrative review aimed to identify the riskiest failure modes (FMs) and the stages at which they occur in the SRS process, as well as the strategies applied to mitigate the risks. It was based on the analysis of published failure mode and effects analysis (FMEA) data. KEY FINDINGS: From the literature search in PubMed and Scopus, 7 articles met the eligibility criteria for inclusion in the qualitative synthesis. In total, 9 radiotherapy departments conducted FMEA in the SRS process. 4 of them were community hospitals and 5 were academic centers. Overall, 54 high-risk FMs were identified with treatment planning (FMs: 18), treatment delivery (FMs: 12), consultation and patient registration (FMs: 10) being the riskiest stages. 10 FMs were stereotactic specific, while the remaining 44 could be met in any radiotherapy technique. Failures associated with contouring, medical records review, target reirradiation, and patient positioning were mostly outlined. Risk mitigation strategies included timeouts, double-checks, checklists, training and changes in the working practice. CONCLUSION: Our review demonstrated that crucial FMs can occur in all SRS stages. Although generalisations were challenging, the FMs analysis provided a significant source of information about potential high risks and continuous improvement strategies that can be applied both in the SRS and other radiotherapy processes. IMPLICATIONS FOR PRACTICE: The results of this research will assist radiotherapy facilities in proactive risk management studies and will allow radiotherapy professionals to reflect on their practice and learn from others' experiences.
Asunto(s)
Radiocirugia , Humanos , Radiocirugia/métodos , Gestión de RiesgosRESUMEN
PURPOSE: The purpose of this study is to examine the association between the development of articular cartilage pathology and knee rotation after single-bundle anterior cruciate ligament (ACL) reconstruction. METHODS: Seventeen patients that underwent single-bundle ACL reconstruction and did not have any cartilage lesions at the time of surgery based on the Outerbridge classification or meniscal injury that required meniscectomy > 20% were examined by MRI and in the biomechanics laboratory at a 6-year minimum follow-up. Cartilage lesions that occurred after reconstruction were graded on MRI according to a modified Noyes scale. For cartilage evaluation, the lateral and medial femoral condyles were divided into 9 segments each (lateral, central, and medial third and each third was divided into anterior, central, and posterior segment). Tibial rotation during a pivoting task was measured with optoelectronic motion analysis system and side-to-side differences of tibial rotation between the reconstructed and contralateral intact knees were calculated. The association between the total modified Noyes scale score (outcome variable) and side-to-side differences of tibial rotation after controlling for meniscectomy and meniscal repair was investigated with hierarchical regression models. RESULTS: Side-to-side difference of tibial rotation was associated with total modified Noyes scale score (p = 0.015, ß = 0.667, adjusted R2 = 42.1%). All patients developed new cartilage lesions in MRI located mainly at the central region of the lateral femoral condyle and less frequently in the central and anterior regions of the medial femoral condyle. CONCLUSION: Abnormally increased tibial rotation that persists after ACL-R is significantly associated with the development of new articular cartilage lesions at mean 8.4 years after reconstruction which were located mainly at the central region of the LFC and secondarily in the central and anterior regions of the MFC (more superficial lesions). These findings suggest that there is emerging evidence that abnormal rotational kinematics is a potential risk factor for the pathogenesis and onset of posttraumatic articular cartilage degeneration after ACLR. LEVEL OF EVIDENCE: IV.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Reconstrucción del Ligamento Cruzado Anterior , Cartílago Articular , Lesiones del Ligamento Cruzado Anterior/patología , Lesiones del Ligamento Cruzado Anterior/cirugía , Reconstrucción del Ligamento Cruzado Anterior/efectos adversos , Fenómenos Biomecánicos , Cartílago Articular/cirugía , Fémur/cirugía , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Tibia/diagnóstico por imagen , Tibia/cirugíaRESUMEN
The dose rate distributions delivered to 55 prostate and head & neck (H&N) cancer patients treated with a helical TomoTherapy (HT) system were resolved and assessed with regard to pitch and field width defined during treatment planning. Statistical analysis of the studied cases showed that the median treatment delivery time was 4.4 min and 6.3 min for the prostate and H&N cases, respectively. Dose rate volume histogram data for the studied cases showed that the 25% and 12% of the volume of the planning target volumes of the prostate and H&N cases are irradiated with a dose rate of greater or equal to 1 Gy min-1. Quartile dose rate (QDR) data confirmed that in HT, where the target is irradiated in slices, most of the dose is delivered to each voxel of the target when it travels within the beam. Analysis of the planning data from all cases showed that this lasts for 68 s (median value). QDRs results showed that using the 2.5 cm field width, 75% of the prescribed dose is delivered to target voxels with a median dose rate of at least 3.2 Gy min-1and 4.5 Gy min-1, for the prostate and H&N cases, respectively. Systematically higher dose rates were observed for the H&N cases due to the shallower depths of the lesions in this anatomical site. Delivered dose rates were also found to increase with field width and pitch setting, due to the higher output of the system which, in general, results in accordingly decreased total treatment time. The biological effect of the dose rate findings of this work needs to be further investigated using in-vitro studies and clinical treatment data.
Asunto(s)
Neoplasias de Cabeza y Cuello , Radioterapia de Intensidad Modulada , Neoplasias de Cabeza y Cuello/radioterapia , Humanos , Masculino , Próstata/diagnóstico por imagen , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodosRESUMEN
PURPOSE: The aim of this study is to compare polyacrylamide and agarose gels, as components of a simple MRI phantom, for the measurements of Apparent Diffusion Coefficient (ADC), T1 and T2 relaxation times. MATERIALS AND METHODS: Five (5) test tubes with polyacrylamide gels of different monomer concentrations and six (6) test tubes of different agarose gel concentrations were used as a phantom for ADC, T1 and T2 measurements, which were expressed as 2D color parametric maps, on a 1.5â¯T clinical MRI system. ADC and T2 maps were calculated utilizing a Weighted Linear (WL) regression fitting algorithm. T1 maps were calculated utilizing a standard non-linear fitting algorithm. RESULTS: In agarose gels, ADC measurements are independent of the agarose concentration, whereas the T1 and T2 relaxation times decrease with increasing agarose concentration. On the contrary, in polyacrylamide gels, ADC measurements decrease quadratically while increasing the monomer concentration, whereas the T1 and T2 relaxation times reveal a linear decrease with increasing monomer concentration. CONCLUSION: Polyacrylamide gels can serve as a better means for simulating ADC values, as compared with the agarose gels used in this study.
Asunto(s)
Imagen de Difusión por Resonancia Magnética , Imagen por Resonancia Magnética , Resinas Acrílicas , Geles , Humanos , Fantasmas de Imagen , SefarosaRESUMEN
Dual-energy computed tomography (DECT) has been shown to allow for more accurate ion therapy treatment planning by improving the estimation of tissue stopping power ratio (SPR) relative to water, among other tissue properties. In this study, we measured and compared the accuracy of SPR values derived using both dual- and single-energy CT (SECT) based on different published conversion algorithms. For this purpose, a phantom setup containing either fresh animal soft tissue samples (beef, pork) and a water reference or tissue equivalent plastic materials was designed and irradiated in a clinical proton therapy facility. Dosimetric polymer gel was positioned downstream of the samples to obtain a three-dimensional proton range distribution with high spatial resolution. The mean proton range in gel for each tissue relative to the water sample was converted to a SPR value. Additionally, the homogeneous samples were probed with a variable water column encompassed by two ionization chambers to benchmark the SPR accuracy of the gel dosimetry. The SPR values measured with both methods were consistent with a mean deviation of 0.2%, but the gel dosimetry captured range variations up to 5 mm within individual samples.Across all fresh tissue samples the SECT approach yielded significantly greater mean absolute deviations from the SPR deduced using gel range measurements, with an average difference of 1.2%, compared to just 0.3% for the most accurate DECT-based algorithm. These results show a significant advantage of DECT over SECT for stopping power prediction in a realistic setting, and for the first time allow to compare a large set of methods under the same conditions.
Asunto(s)
Terapia de Protones , Tomografía Computarizada por Rayos X , Animales , Bovinos , Fantasmas de Imagen , Protones , RadiometríaRESUMEN
INTRODUCTION: Numerous studies have focused on the anteroposterior stability after anterior cruciate ligament (ACL) reconstruction, with less emphasis on rotational stability. It has been hypothesized that bone patella tendon bone (BTB) autograft for ACL reconstruction restores knee rotation closely to normal due to its comparable fiber orientation to the native ACL. MATERIALS AND METHODS: Twenty patients with unilateral ACL rupture and an uninjured contralateral knee were included in this study. The ACL was reconstructed using the medial third of the patellar tendon. Tunnel placement was controlled by fluoroscopy. Implant-free press-fit graft fixation was used on both femoral and tibial side. Bone blocks were carefully placed to restore fiber orientation of both the anteromedial and posterolateral bundle, similar to the native ACL. Rotatory laxity of both knees was measured at 0° and 25° of flexion pre- and post-surgery, using an active opto-electronical motion-analysis system (LUKOTRONIC AS 100®). All measurements were performed under general anesthesia during surgery. RESULTS: Knee rotation was reduced significantly in both 0°and 25° of flexion following ACL reconstruction (p < 0.001). The side to side difference (SSD) of the rotatory laxity in extension was greater in the ACL-deficient knee (14.9° ± 8.9°), but decreased significantly after ACL reconstruction (- 5.9° ± 7.7°, minus value means less than in the uninjured knee). There was a similar finding at 25° of knee flexion where greater rotation of the ACL-deficient knee (5.7° ± 10.3°) prior to surgery changed to lower degree of rotation after surgery (- 11.3° ± 8.4°) in comparison to the uninjured knee. CONCLUSIONS: ACL reconstruction with a BTB graft in anatomical position using press-fit implant-free fixation is able to restore rotatory knee stability close to the intact contralateral knee. Despite the fact that the BTB graft offers fiber orientation close to the natural ACL, the surgeon should be aware of the potential risk of over-constraining the knee in terms of rotation. LEVEL OF EVIDENCE: II.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Reconstrucción del Ligamento Cruzado Anterior , Trasplante Óseo/métodos , Complicaciones Posoperatorias , Adulto , Lesiones del Ligamento Cruzado Anterior/fisiopatología , Lesiones del Ligamento Cruzado Anterior/cirugía , Reconstrucción del Ligamento Cruzado Anterior/efectos adversos , Reconstrucción del Ligamento Cruzado Anterior/métodos , Autoinjertos , Fenómenos Biomecánicos , Femenino , Humanos , Inestabilidad de la Articulación/etiología , Inestabilidad de la Articulación/cirugía , Articulación de la Rodilla/fisiopatología , Articulación de la Rodilla/cirugía , Masculino , Complicaciones Posoperatorias/etiología , Complicaciones Posoperatorias/fisiopatología , Complicaciones Posoperatorias/prevención & control , Rango del Movimiento ArticularRESUMEN
The dosimetric accuracy of the Leksell GammaPlan Convolution calculation algorithm was evaluated through comparison with corresponding Monte Carlo (MC) dosimetric results. MC simulations were based on generated sector phase space files for the 4 mm, 8 mm and 16 mm collimator sizes, using a previous comprehensive Gamma Knife Perfexion™ source model and validated using film dosimetry. Test cases were designed for the evaluation of the Convolution algorithm involving irradiation of homogeneous and inhomogeneous phantom geometries mimicking clinical cases, with radiation fields created using one sector (single sector), all sectors with the same (single shot) or different (composite shot) collimator sizes. Dose calculations using the Convolution algorithm were found to be in excellent agreement (gamma pass rate greater than 98%, applying 1%/1 mm local dose difference and distance agreement criteria), with corresponding MC calculations, indicating the accuracy of the Convolution algorithm in homogeneous and heterogeneous model geometries. While of minor clinical importance, large deviations were observed for the voxels laying inside air media. The calculated beam on times using the Convolution algorithm were found to increase (up to 7%) relative to the TMR 10 algorithm currently used in clinical practice, especially in a test case mimicking a brain metastasis close to the skull, in excellent agreement with corresponding MC calculations.
Asunto(s)
Algoritmos , Dosis de Radiación , Radiocirugia , Neoplasias Encefálicas/diagnóstico por imagen , Neoplasias Encefálicas/secundario , Humanos , Método de Montecarlo , Fantasmas de Imagen , Radiometría , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por ComputadorRESUMEN
Following the clinical introduction of the Elekta Unity MR-linac, there is an urgent need for development of dosimetry protocols and tools, not affected by the presence of a magnetic field. This work presents a benchmarking methodology comprising 2D/3D passive dosimetry and involving on-couch adaptive treatment planning, a unique step in MR-linac workflows. Two identical commercially available 3D-printed head phantoms (featuring realistic bone anatomy and MR/CT contrast) were employed. One phantom incorporated a film dosimetry insert, while the second was filled with polymer gel. Gel dose-response characteristics were evaluated under the Unity irradiation and read-out conditions, using vials and a cubic container filled with gel from the same batch. Treatment plan for the head phantoms involved a hypothetical large C-shape brain lesion, partly surrounding the brainstem. An IMRT step-and-shoot 7-beam plan was employed. Pre-treatment on-couch MR-images were acquired in order for the treatment planning system to calculate the virtual couch shifts and perform adaptive planning. Absolute 2D and relative 3D measurements were compared against calculations related to both adapted and original plans. Real-time dose accumulation monitoring in the gel-filled phantom was also performed. Results from the vials and cubic container suggest that gel dose-response is linear in the dose range investigated and signal integrity is mature at the read-out timings considered. Head phantom 2D and 3D measurements agreed well with calculations with 3D gamma index passing rates above 90% in all cases, even with the most stringent criteria used (2 mm/2%). By exploiting the 3D information provided by the gel, comparison also involved DVHs, dose-volume and plan quality metrics, which also reflected the agreement between adapted and delivered plans within ±4%. No considerable discrepancies were detected between adapted and original plans. A novel methodology was developed and implemented, suitable for QA procedures in Unity. TPS calculations were validated within the experimental uncertainties involved.
Asunto(s)
Dosimetría por Película/métodos , Campos Magnéticos , Aceleradores de Partículas , Radiometría/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodos , Calibración , Rayos gamma , Cabeza/diagnóstico por imagen , Humanos , Movimiento (Física) , Fantasmas de Imagen , Impresión Tridimensional , Garantía de la Calidad de Atención de Salud , Control de Calidad , Dosis de Radiación , Dosificación Radioterapéutica , Reproducibilidad de los ResultadosRESUMEN
In single-isocenter stereotactic radiosurgery/radiotherapy (SRS/SRT) intracranial applications, multiple targets are being treated concurrently, often involving non-coplanar arcs, small photon beams and steep dose gradients. In search for more rigorous quality assurance protocols, this work presents and evaluates a novel methodology for patient-specific pre-treatment plan verification, utilizing 3D printing technology. In a patient's planning CT scan, the external contour and bone structures were segmented and 3D-printed using high-density bone-mimicking material. The resulting head phantom was filled with water while a film dosimetry insert was incorporated. Patient and phantom CT image series were fused and inspected for anatomical coherence. HUs and corresponding densities were compared in several anatomical regions within the head. Furthermore, the level of patient-to-phantom dosimetric equivalence was evaluated both computationally and experimentally. A single-isocenter multi-focal SRS treatment plan was prepared, while dose distributions were calculated on both CT image series, using identical calculation parameters. Phantom- and patient-derived dose distributions were compared in terms of isolines, DVHs, dose-volume metrics and 3D gamma index (GI) analysis. The phantom was treated as if the real patient and film measurements were compared against the patient-derived calculated dose distribution. Visual inspection of the fused CT images suggests excellent geometric similarity between phantom and patient, also confirmed using similarity indices. HUs and densities agreed within one standard deviation except for the skin (modeled as 'bone') and sinuses (water-filled). GI comparison between the calculated distributions resulted in passing rates better than 97% (1%/1 mm). DVHs and dose-volume metrics were also in satisfying agreement. In addition to serving as a feasibility proof-of-concept, experimental absolute film dosimetry verified the computational study results. GI passing rates were above 90%. Results of this work suggest that employing the presented methodology, patient-equivalent phantoms (except for the skin and sinuses areas) can be produced, enabling literally patient-specific pre-treatment plan verification in intracranial applications.
Asunto(s)
Neoplasias Encefálicas/cirugía , Dosimetría por Película/instrumentación , Fantasmas de Imagen , Impresión Tridimensional/instrumentación , Garantía de la Calidad de Atención de Salud/normas , Radiocirugia/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Algoritmos , Humanos , Radiometría/métodos , Dosificación Radioterapéutica , Tomografía Computarizada por Rayos XRESUMEN
AIMS: To synthesise the literature and perform a meta-analysis detailing the longitudinal recovery in the first two years following a distal radius fracture (DRF) managed with volar plate fixation. MATERIALS AND METHODS: Three databases were searched to identify relevant articles. Following eligibility screening and quality assessment, data were extracted and outcomes were assimilated at the post-operative time points of interest. A state-of-the-art longitudinal mixed-effects meta-analysis model was employed to analyse the data. RESULTS: The search identified 5698 articles, of which 46 study reports met the selection criteria. High levels of disability and impairment were reported in the immediate post-operative period with subsequently a rapid initial improvement followed by more gradual improvement for up to one year. The results highlight that the period associated with the greatest physical recovery is in the first three months and suggest that the endpoint of treatment outcomes is best measured at one year post-surgery. CONCLUSION: Clinically meaningful improvements in outcomes can be expected for 12 months, after which progress plateaus and reaches normal values. This paper adopted a novel approach to meta-analyses in that the research question was of a longitudinal nature, which required a unique method of statistical analysis. Cite this article: Bone Joint J 2017;99-B:1665-76.
Asunto(s)
Placas Óseas , Fijación Interna de Fracturas/instrumentación , Fracturas del Radio/cirugía , Traumatismos de la Muñeca/cirugía , Humanos , Estudios Longitudinales , Recuperación de la FunciónRESUMEN
Detector-, field size- and machine-specific correction factors are required for precise dosimetry measurements in small and non-standard photon fields. In this work, Monte Carlo (MC) simulation techniques were used to calculate the [Formula: see text] and [Formula: see text] correction factors for a series of ionization chambers, a synthetic microDiamond and diode dosimeters, used for reference and/or output factor (OF) measurements in the Gamma Knife Perfexion photon fields. Calculations were performed for the solid water (SW) and ABS plastic phantoms, as well as for a water phantom of the same geometry. MC calculations for the [Formula: see text] correction factors in SW were compared against corresponding experimental results for a subset of ionization chambers and diode detectors. Reference experimental OF data were obtained through the weighted average of corresponding measurements using TLDs, EBT-2 films and alanine pellets. [Formula: see text] values close to unity (within 1%) were calculated for most of ionization chambers in water. Greater corrections of up to 6.0% were observed for chambers with relatively large air-cavity dimensions and steel central electrode. A phantom correction of 1.006 and 1.024 (breaking down to 1.014 from the ABS sphere and 1.010 from the accompanying ABS phantom adapter) were calculated for the SW and ABS phantoms, respectively, adding up to [Formula: see text] corrections in water. Both measurements and MC calculations for the diode and microDiamond detectors resulted in lower than unit [Formula: see text] correction factors, due to their denser sensitive volume and encapsulation materials. In comparison, higher than unit [Formula: see text] results for the ionization chambers suggested field size depended dose underestimations (being significant for the 4 mm field), with magnitude depending on the combination of contradicting phenomena associated with volume averaging and electron fluence perturbations. Finally, the presence of 0.5 mm air-gap between the diodes' frontal surface and their phantom-inserts may considerably influence OF measurements, reaching 4.6% for the Razor diode.
Asunto(s)
Método de Montecarlo , Fantasmas de Imagen , Fotones/uso terapéutico , Radiocirugia/métodos , Electrones , Humanos , Radiometría/métodos , AguaRESUMEN
PURPOSE: To investigate the clinical significance of introducing model based dose calculation algorithms (MBDCAs) as an alternative to TG-43 in 192Ir interstitial breast brachytherapy. MATERIALS AND METHODS: A 57 patient cohort was used in a retrospective comparison between TG-43 based dosimetry data exported from a treatment planning system and Monte Carlo (MC) dosimetry performed using MCNP v. 6.1 with plan and anatomy information in DICOM-RT format. Comparison was performed for the target, ipsilateral lung, heart, skin, breast and ribs, using dose distributions, dose-volume histograms (DVH) and plan quality indices clinically used for plan evaluation, as well as radiobiological parameters. RESULTS: TG-43 overestimation of target DVH parameters is statistically significant but small (less than 2% for the target coverage indices and 4% for homogeneity indices, on average). Significant dose differences (>5%) were observed close to the skin and at relatively large distances from the implant leading to a TG-43 dose overestimation for the organs at risk. These differences correspond to low dose regions (<50% of the prescribed dose), being less than 2% of the prescribed dose. Detected dosimetric differences did not induce clinically significant differences in calculated tumor control probabilities (mean absolute difference <0.2%) and normal tissue complication probabilities. CONCLUSION: While TG-43 shows a statistically significant overestimation of most indices used for plan evaluation, differences are small and therefore not clinically significant. Improved MBDCA dosimetry could be important for re-irradiation, technique inter-comparison and/or the assessment of secondary cancer induction risk, where accurate dosimetry in the whole patient anatomy is of the essence.
Asunto(s)
Braquiterapia/métodos , Neoplasias de la Mama/radioterapia , Radioisótopos de Iridio/uso terapéutico , Planificación de la Radioterapia Asistida por Computador/estadística & datos numéricos , Algoritmos , Fenómenos Biofísicos , Braquiterapia/estadística & datos numéricos , Simulación por Computador , Femenino , Humanos , Método de Montecarlo , Fantasmas de Imagen , Dosificación Radioterapéutica , Estudios RetrospectivosRESUMEN
This work provides characterization of system-related geometric distortions present in MRIs used in Gamma Knife (GK) stereotactic radiosurgery (SRS) treatment planning. A custom-made phantom, compatible with the Leksell stereotactic frame model G and encompassing 947 control points (CPs), was utilized. MR images were obtained with and without the frame, thus allowing discrimination of frame-induced distortions. In the absence of the frame and following compensation for field inhomogeneities, measured average CP disposition owing to gradient nonlinearities was 0.53 mm. In presence of the frame, contrarily, detected distortion was greatly increased (up to about 5 mm) in the vicinity of the frame base due to eddy currents induced in the closed loop of its aluminum material. Frame-related distortion was obliterated at approximately 90 mm from the frame base. Although the region with the maximum observed distortion may not lie within the GK treatable volume, the presence of the frame results in distortion of the order of 1.5 mm at a 7 cm distance from the center of the Leksell space. Additionally, severe distortions observed outside the treatable volume could possibly impinge on the delivery accuracy mainly by adversely affecting the registration process (e.g. the position of the lower part of the N-shaped fiducials used to define the stereotactic space may be miss-registered). Images acquired with a modified version of the frame developed by replacing its front side with an acrylic bar, thus interrupting the closed aluminum loop and reducing the induced eddy currents, were shown to benefit from relatively reduced distortion. System-related distortion was also identified in patient MR images. Using corresponding CT angiography images as a reference, an offset of 1.1 mm was detected for two vessels lying in close proximity to the frame base, while excellent spatial agreement was observed for a vessel far apart from the frame base.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Imagen por Resonancia Magnética/métodos , Modelos Teóricos , Fantasmas de Imagen , Radiocirugia/instrumentación , Planificación de la Radioterapia Asistida por Computador/métodos , Humanos , Polimetil Metacrilato , Radiocirugia/métodosRESUMEN
BACKGROUND: Hamstring graft has substantial differences with BPTB graft regarding initial mechanical strength, healing sequence, and vascularization, which may imply that a different approach during rehabilitation period is required. The purpose of this study was to investigate the influence of knee bracing on tibial rotation in ACL-reconstructed patients with a hamstring autograft during high loading activities. The hypothesis was that there would be a decrease in tibial rotation in the ACL-reconstructed braced knee as compared to the unbraced knee. METHODS: Twenty male patients having undergone unilateral ACL reconstruction with a semitendinosus/gracilis autograft were assessed. Kinematic data were collected with an eight-camera optoelectronic system during two stressful tasks: (1) descending from a stair and subsequent pivoting; and (2) landing from a platform and subsequent pivoting. In each patient, three different experimental conditions were evaluated: (A) wearing a prophylactic brace (braced condition); (B) wearing a patellofemoral brace (sleeved condition); (C) without brace (unbraced condition). The intact knee without brace served as a control. RESULTS: Tibial rotation was significantly lower in the intact knee compared to all three conditions of the ACL-reconstructed knee (P≤0.01 for both tasks). Presence of a brace or sleeve resulted in lower tibial rotation than in the unbraced condition (p=0.003 for descending/pivot and P=0.0004 for landing/pivot). The braced condition resulted in lower rotation than the sleeved condition for descending/pivoting (P=0.031) while no differences were found for landing/pivoting (P=0.230). CONCLUSION: Knee bracing limited the excessive tibial rotation during pivoting under high loading activities in ACL-reconstructed knees with a hamstring graft. This partial restoration of normal kinematics may have a potential beneficial effect in patients recovering from ACL reconstruction with a hamstring autograft. LEVEL OF EVIDENCE: Level III, case-control therapeutic study.
Asunto(s)
Reconstrucción del Ligamento Cruzado Anterior , Tirantes , Tendones Isquiotibiales/trasplante , Rotación , Tibia/fisiología , Adulto , Artroscopía , Fenómenos Biomecánicos/fisiología , Humanos , Articulación de la Rodilla , Masculino , Adulto JovenRESUMEN
OBJECTIVE: To determine the prevalence of radiographic patellofemoral osteoarthritis (OA) from population- and symptom-based cohorts and to evaluate if knee pain, physical function and quality of life (QOL) differ between people with isolated patellofemoral OA, isolated tibiofemoral OA and combined patellofemoral and tibiofemoral OA. METHOD: Terms associated with "patellofemoral OA", "prevalence" and "clinical features" were used to search Medline, EMBASE, CINAHL, SCOPUS, AMED and Web of Science databases with no language restriction' from inception to August 2014. Two independent reviewers screened papers for eligibility. Studies were included if they reported prevalence of compartmental patterns of radiographic knee OA in population- or symptom-based cohorts. Studies were excluded if they evaluated a targeted sample (e.g., occupation-specific participants) or repeated already reported data from the same cohorts. Point prevalence estimates of patellofemoral OA were extracted from eligible studies, pooled and quantitatively analysed. A critical appraisal tool was used to evaluate methodological quality. RESULTS: The search yielded 1891 records. The inclusion criteria were met by 32 studies. The crude prevalence of patellofemoral OA was 25% in the population-based cohorts (aged >20 years) and 39% in the symptom-based cohorts (aged >30 years). Eight studies reported knee pain, physical function and QOL in people with different compartmental disease; however no significant differences were found. CONCLUSION: These findings confirm the substantial prevalence of patellofemoral OA, demonstrating the need to specifically consider the patellofemoral joint in knee OA research and clinical settings.
Asunto(s)
Osteoartritis de la Rodilla , Humanos , Articulación Patelofemoral , Prevalencia , Calidad de VidaRESUMEN
This work presents a comprehensive Monte Carlo (MC) simulation model for the Gamma Knife Perfexion (PFX) radiosurgery unit. Model-based dosimetry calculations were benchmarked in terms of relative dose profiles (RDPs) and output factors (OFs), against corresponding EBT2 measurements. To reduce the rather prolonged computational time associated with the comprehensive PFX model MC simulations, two approximations were explored and evaluated on the grounds of dosimetric accuracy. The first consists in directional biasing of the (60)Co photon emission while the second refers to the implementation of simplified source geometric models. The effect of the dose scoring volume dimensions in OF calculations accuracy was also explored. RDP calculations for the comprehensive PFX model were found to be in agreement with corresponding EBT2 measurements. Output factors of 0.819 ± 0.004 and 0.8941 ± 0.0013 were calculated for the 4 mm and 8 mm collimator, respectively, which agree, within uncertainties, with corresponding EBT2 measurements and published experimental data. Volume averaging was found to affect OF results by more than 0.3% for scoring volume radii greater than 0.5 mm and 1.4 mm for the 4 mm and 8 mm collimators, respectively. Directional biasing of photon emission resulted in a time efficiency gain factor of up to 210 with respect to the isotropic photon emission. Although no considerable effect on relative dose profiles was detected, directional biasing led to OF overestimations which were more pronounced for the 4 mm collimator and increased with decreasing emission cone half-angle, reaching up to 6% for a 5° angle. Implementation of simplified source models revealed that omitting the sources' stainless steel capsule significantly affects both OF results and relative dose profiles, while the aluminum-based bushing did not exhibit considerable dosimetric effect. In conclusion, the results of this work suggest that any PFX simulation model should be benchmarked in terms of both RDP and OF results.
Asunto(s)
Radiocirugia/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Método de Montecarlo , Radiometría/métodosRESUMEN
The present study investigated the crossover effect of three rehabilitation programs (isokinetic, isotonic and home exercise), that were focused on the involved extremity, on the isokinetic performance of knee flexors and extensors and the functional performance of the uninvolved leg in subjects who underwent arthroscopic partial meniscectomy. Twenty-eight patients (mean age: 28) were measured for isokinetic performance and functional performance with the single jump, triple jump and vertical jump 14 days and 33 days after surgery. Peak torque of hamstrings at 60 degrees /sec (p = .008), hamstrings at 180 degrees /sec (p < 0.001), quadriceps at 180 degrees /sec (p = 0.024), single jump (p < 0.001), triple jump (p = 0.002), and vertical jump (p = 0.005) were significantly increased during the final measurement session compared to the initial measurement session. The knee flexors exhibited higher gains than the knee extensors. There were no differences between the isokinetic, isotonic, and home exercise program group (p = 0.506). Researchers and clinicians are encouraged to obtain measurements of the uninvolved leg at consistent time points between groups in order to allow for accurate comparisons.
Asunto(s)
Artroscopía , Traumatismos en Atletas/rehabilitación , Traumatismos de la Rodilla/rehabilitación , Contracción Muscular/fisiología , Modalidades de Fisioterapia , Adulto , Traumatismos en Atletas/cirugía , Femenino , Humanos , Traumatismos de la Rodilla/cirugía , Masculino , Músculo Esquelético , Centros de Rehabilitación , Resultado del TratamientoRESUMEN
Emerging evidence is elucidating how non-nutrient phytochemicals underlie the health promotion afforded by fruits and vegetables. This review focuses on Vaccinium macrocarpon, the American cranberry, compiling a comprehensive list of its known phytochemical components, and detailing their prevalence in cranberry fruit and its products. Flavonoids, especially colored anthocyanins, abundant flavonols, and unique proanthocyanidins, have attracted major research attention. Other notable active components include phenolic acids, benzoates, hydroxycinnamic acids, terpenes and organic acids. Health effects of cranberries, cranberry products, and isolated cranberry components in humans and animals, as well as in vitro, are debated. Evidence for protection from several bacterial pathogens, cancer, cardiovascular disease, and inflammation is compelling, while neuroprotection and anti-viral activity also have begun to draw new consideration. Emerging bioavailability data is considered and potential molecular mechanisms are evaluated, linking phytochemicals to health effects through their biochemical properties and reactions. Finally, the effects of processing and storage on cranberry phytochemicals is discussed, with a focus on identifying research gaps and novel means to preserve their natural, health-promoting components.
Asunto(s)
Flavonoides/análisis , Flavonoles/análisis , Fitoterapia , Extractos Vegetales/uso terapéutico , Vaccinium macrocarpon/química , Antocianinas/análisis , Disponibilidad Biológica , Flavonoides/uso terapéutico , Flavonoles/uso terapéutico , Conservación de Alimentos , Alimentos Orgánicos , Humanos , Proantocianidinas/análisisRESUMEN
Small photon fields are increasingly used in modern radiotherapy and especially in IMRT and SRS/SRT treatments. The uncertainties related to small field profile measurements can introduce significant systematic errors to the overall treatment process. These measurements are challenging mainly due to the absence of charged particle equilibrium conditions, detector size and composition effects, and positioning problems. In this work four different dosimetric methods have been used to measure the profiles of three small 6 MV circular fields having diameters of 7.5, 15.0, and 30.0 mm: a small sensitive volume air ion chamber, a diamond detector, a novel silicon-diode array (DOSI), and vinyl-pyrrolidone based polymer gel dosimeter. The results of this work support the validity of previous findings, suggesting that (a) air ion chambers are not suitable for small field dosimetry since they result in penumbra broadening and require significant corrections due to severe charged particle transport alterations; (b) diamond detectors provide high resolution and rather accurate small field profile measurements, as long as positioning problems can be addressed and the necessary dose rate corrections are correctly applied; and (c) the novel silicon-diode array (DOSI) used in this study seems to be adequate for small field profile measurements overcoming positioning problems. Polymer gel data were assumed as reference data to which the other measurement data were compared both qualitatively and quantitatively using the gamma-index concept. Polymer gels are both phantom and dosimeter, hence there are no beam perturbation effects. In addition, polymer gels are tissue equivalent and can provide high-spatial density and high-spatial resolution measurements without positioning problems, which makes them useful for small field dosimetry measurements. This work emphasizes the need to perform beam profile measurements of small fields (for acceptance, commissioning, treatment planning systems data feed, and periodic quality assurance purposes) using more than one dosimetric method. The authors believe this to be a safe way towards the reduction of the overall uncertainty related to SRS/SRT treatments.
Asunto(s)
Fotones/uso terapéutico , Radiometría/instrumentación , Radiometría/métodos , Radiocirugia/métodos , Relación Dosis-Respuesta en la Radiación , Diseño de Equipo , Análisis de Falla de Equipo , Dosis de Radiación , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
To protect human health, atrazine concentrations in finished municipal drinking water must not exceed a maximum contaminant level (MCL) of 3 microg/L, as determined by a specific monitoring regime mandated by the United States Environmental Protection Agency. Atrazine levels were monitored along tile-fed drainage ditches draining to a major drinking water source and used to predict MCL exceedance frequencies of intake and finished drinking water. Water samples were collected daily at eight monitoring sites located at the outlets of subbasins draining 298-19 341 ha (736-47 794 ac). Flow-weighted average (FWA) atrazine concentrations ranged from 0.9 to 9.8 microg/L, and were above 3 microg/L for the majority of sites, including the largest site, which represents water quality at the intake of the local municipal water treatment plant. However, a relatively low percentage of samples near the water utility intake exceeding 3 microg/L atrazine (10.4%) made this problem difficult to detect. In order to have a 95% probability of detecting any intake sample exceeding 3 microg/L atrazine in a drainage system exceeding 3 microg/L atrazine on a FWA basis, sampling frequency would need to be every 7 days or more often during the second quarter when the potentials for field atrazine losses and temporal variability of atrazine concentrations are highest.