Molecular Functionalization of 2H-Phase MoS2 Nanosheets via an Electrolytic Route for Enhanced Catalytic Performance.

The molecular functionalization of two-dimensional MoS2 is of practical relevance with a view to, for example, facilitating its liquid-phase processing or enhancing its performance in target applications. While derivatization of metallic 1T-phase MoS2 nanosheets has been relatively well studied, progress involving their thermodynamically stable, 2H-phase counterpart has been more limited due to the lower chemical reactivity of the latter. Here, we report a simple electrolytic strategy to functionalize 2H-phase MoS2 nanosheets with molecular groups derived from organoiodides. Upon cathodic treatment of a pre-expanded MoS2 crystal in an electrolyte containing the organoiodide, water-dispersible nanosheets derivatized with acetic acid or aniline moieties (∼0.10 molecular groups inserted per surface sulfur atom) were obtained. Analysis of the functionalization process indicated it to be enabled by the external supply of electrons from the cathodic potential, although they could also be sourced from a proper reducing agent, as well as by the presence of intrinsic defects in the 2H-phase MoS2 lattice (e.g., sulfur vacancies), where the molecular groups can bind. The acetic acid-functionalized nanosheets were tested as a non-noble metal-based catalyst for nitroarene and organic dye reduction, which is of practical utility in environmental remediation and chemical synthesis, and exhibited a markedly enhanced activity, surpassing that of other (1T- or 2H-phase) MoS2 materials and most non-noble metal catalysts previously reported for this application. The reduction kinetics (reaction order) was seen to correlate with the net electric charge of the nitroarene/dye molecules, which was ascribed to the distinct abilities of the latter to diffuse to the catalyst surface. The functionalized MoS2 catalyst also worked efficiently at realistic (i.e., high) reactant concentrations, as well as with binary and ternary mixtures of the reactants, and could be immobilized on a polymeric scaffold to expedite its manipulation and reuse.

MoS2 flakes stabilized with DNA/RNA nucleotides: In vitro cell response.

Two-dimensional transition metal dichalcogenides (TMDCs), such as MoS2 and WS2, have recently emerged as nanomaterials with potential use in biomedicine. An attractive means to favor their interaction with biological media is the use of proper biomolecules as exfoliating/dispersing agents. Here, MoS2 flakes were stabilized with different small functional biomolecules such as adenosine monophosphate (AMP), guanosine monophosphate (GMP) and flavin mononucleotide (FMN) through the strong nucleotide-MoS2 interaction of Lewis acid-base type, rather than just on the weak dispersive and hydrophobic forces commonly associated with the use of many surfactants. The impact of the nucleotide-stabilized MoS2 flakes on the viability and cell proliferation, on the production of intracellular reactive oxygen species (ROS), and on the preosteoblast differentiation process (early stage) has been also evaluated, as well as the incorporation and intracellular localization of the nanomaterials by MC3T3-E1 and Saos-2 cells. The nucleotide-stabilized MoS2 flakes were found to exhibit excellent biocompatibility. Furthermore, their incorporation did not affect the integrity of the cell plasma membrane, which makes them ideal candidates for delivering drug/gene directly into cells. The in vitro cell response of tumor cells to these nanomaterials differs from that of undifferentiated cells, which provides the basis for their potential use in cancer therapy.

A direct route to activated two-dimensional cobalt oxide nanosheets for electrochemical energy storage, catalytic and environmental applications.

Two-dimensional Co3O4 nanosheets have emerged as attractive materials for use in a number of relevant technological applications. To exhibit a competitive performance in such uses, however, their structure needs to be activated, which is frequently accomplished via post-synthesis reduction strategies that introduce oxygen vacancies and increase the number of active Co(II) sites. Here, we investigate a direct route for the synthesis of activated Co3O4 nanosheets that avoids reduction post-treatments, yielding materials with a high potential towards energy- and environment-related applications. The synthesis relied on an interim amorphous cobalt oxide material with nanosheet morphology, which upon calcination afforded Co3O4 nanosheets having Co(II) sites in quantities similar to those usually found for Co3O4 nanostructures activated by reduction post-treatments. When tested as electrodes for charge storage, the nanosheets demonstrated a competitive behavior in terms of both capacity and rate capability, e.g., a gravimetric capacity of ∼293 mAh g-1 at 1 A g-1 with 57% retention at 60 A g-1 was measured for nanosheets calcined at 350 °C. The materials were shown to be efficient catalysts for the reduction of nitroarenes (4-nitrophenol and 4-nitroaniline), outperforming other Co3O4 nanostructures, as well as effective adsorbents for the removal of organic dyes (methyl orange, methylene blue) from water.

A "Nanopore Lithography" Strategy for Synthesizing Hierarchically Micro/Mesoporous Carbons from ZIF-8/Graphene Oxide Hybrids for Electrochemical Energy Storage.

Porous carbons derived from metal-organic frameworks (MOFs) are promising materials for a number of energy- and environment-related applications, but their almost exclusively microporous texture can be an obstacle to their performance in practical uses. Here, we introduce a novel strategy for the generation of very uniform mesoporosity in a prototypical MOF, namely, zeolitic imidazolate framework-8 (ZIF-8). The process, referred to as "nanopore lithography", makes use of graphene oxide (GO) nanosheets enclosing ZIF-8 particles as masks or templates for the transfer of mesoporous texture to the latter. Upon controlled carbonization and activation, nanopores created in the GO envelope serve as selective entry points for localized etching of carbonized ZIF-8, so that such nanopores are replicated in the MOF-derived carbonaceous structure. The resulting porous carbons are dominated by uniform mesopores ∼3-4 nm in width and possess specific surface areas of ∼1300-1400 m2 g-1. Furthermore, we investigate and discuss the specific experimental conditions that afford the mesopore-templating action of the GO nanosheets. Electrochemical characterization revealed an improved capacitance as well as a faster, more reversible charge/discharge kinetics for the ZIF-8-derived porous carbons obtained through nanopore lithography, relative to those for their counterparts with standard activation (no GO templating), thus indicating the potential practical advantage of the present approach in capacitive energy storage applications.

Electrochemical Exfoliation of Graphite in Aqueous Sodium Halide Electrolytes toward Low Oxygen Content Graphene for Energy and Environmental Applications.

Graphene and graphene-based materials have shown great promise in many technological applications, but their large-scale production and processing by simple and cost-effective means still constitute significant issues in the path of their widespread implementation. Here, we investigate a straightforward method for the preparation of a ready-to-use and low oxygen content graphene material that is based on electrochemical (anodic) delamination of graphite in aqueous medium with sodium halides as the electrolyte. Contrary to previous conflicting reports on the ability of halide anions to act as efficient exfoliating electrolytes in electrochemical graphene exfoliation, we show that proper choice of both graphite electrode (e.g., graphite foil) and sodium halide concentration readily leads to the generation of large quantities of single-/few-layer graphene nanosheets possessing a degree of oxidation (O/C ratio down to ∼0.06) lower than that typical of anodically exfoliated graphenes obtained with commonly used electrolytes. The halide anions are thought to play a role in mitigating the oxidation of the graphene lattice during exfoliation, which is also discussed and rationalized. The as-exfoliated graphene materials exhibited a three-dimensional morphology that was suitable for their practical use without the need to resort to any kind of postproduction processing. When tested as dye adsorbents, they outperformed many previously reported graphene-based materials (e.g., they adsorbed ∼920 mg g-1 for methyl orange) and were useful sorbents for oils and nonpolar organic solvents. Supercapacitor cells assembled directly from the as-exfoliated products delivered energy and power density values (up to 15.3 Wh kg-1 and 3220 W kg-1, respectively) competitive with those of many other graphene-based devices but with the additional advantage of extreme simplicity of preparation.

Biomolecule-assisted exfoliation and dispersion of graphene and other two-dimensional materials: a review of recent progress and applications.

Direct liquid-phase exfoliation of layered materials by means of ultrasound, shear forces or electrochemical intercalation holds enormous promise as a convenient, cost-effective approach to the mass production of two-dimensional (2D) materials, particularly in the form of colloidal suspensions of high quality and micrometer- and submicrometer-sized flakes. Of special relevance due to environmental and practical reasons is the production of 2D materials in aqueous medium, which generally requires the use of certain additives (surfactants and other types of dispersants) to assist in the exfoliation and colloidal stabilization processes. In this context, biomolecules have received, in recent years, increasing attention as dispersants for 2D materials, as they provide a number of advantages over more conventional, synthetic surfactants. Here, we review research progress in the use of biomolecules as exfoliating and dispersing agents for the production of 2D materials. Although most efforts in this area have focused on graphene, significant advances have also been reported with transition metal dichalcogenides (MoS2, WS2, etc.) or hexagonal boron nitride. Particular emphasis is placed on the specific merits of different types of biomolecules, including proteins and peptides, nucleotides and nucleic acids (RNA, DNA), polysaccharides, plant extracts and bile salts, on their role as efficient colloidal dispersants of 2D materials, as well as on the potential applications that have been explored for such biomolecule-exfoliated materials. These applications are wide-ranging and encompass the fields of biomedicine (photothermal and photodynamic therapy, bioimaging, biosensing, etc.), energy storage (Li- and Na-ion batteries), catalysis (e.g., catalyst supports for the oxygen reduction reaction or electrocatalysts for the hydrogen evolution reaction), or composite materials. As an incipient area of research, a number of knowledge gaps, unresolved issues and novel future directions remain to be addressed for biomolecule-exfoliated 2D materials, which will be discussed in the last part of this review.

Electrolytic exfoliation of graphite in water with multifunctional electrolytes: en route towards high quality, oxide-free graphene flakes.

Electrolytic--usually referred to as electrochemical--exfoliation of graphite in water under anodic potential holds enormous promise as a simple, green and high-yield method for the mass production of graphene, but currently suffers from several drawbacks that hinder its widespread adoption, one of the most critical being the oxidation and subsequent structural degradation of the carbon lattice that is usually associated with such a production process. To overcome this and other limitations, we introduce and implement the concept of multifunctional electrolytes. The latter are amphiphilic anions (mostly polyaromatic hydrocarbons appended with sulfonate groups) that play different relevant roles as (1) an intercalating electrolyte to trigger exfoliation of graphite into graphene flakes, (2) a dispersant to afford stable aqueous colloidal suspensions of the flakes suitable for further use, (3) a sacrificial agent to prevent graphene oxidation during exfoliation and (4) a linker to promote nanoparticle anchoring on the graphene flakes, yielding functional hybrids. The implementation of this strategy with some selected amphiphiles even furnishes anodically exfoliated graphenes of a quality similar to that of flakes produced by direct, ultrasound- or shear-induced exfoliation of graphite in the liquid phase (i.e., almost oxide- and defect-free). These high quality materials were used for the preparation of catalytically efficient graphene-Pt nanoparticle hybrids, as demonstrated by model reactions (reduction of nitroarenes). The multifunctional performance of these electrolytes is also discussed and rationalized, and a mechanistic picture of their oxidation-preventing ability is proposed. Overall, the present results open the prospect of anodic exfoliation as a competitive method for the production of very high quality graphene flakes.

Investigating the Dispersion Behavior in Solvents, Biocompatibility, and Use as Support for Highly Efficient Metal Catalysts of Exfoliated Graphitic Carbon Nitride.

The liquid-phase exfoliation of graphitic carbon nitride (g-C3N4) to afford colloidal dispersions of two-dimensional flakes constitutes an attractive route to facilitate the processing and implementation of this novel material toward different technological applications, but quantitative knowledge about its dispersibility in solvents is lacking. Here, we investigate the dispersion behavior of exfoliated g-C3N4 in a wide range of solvents and evaluate the obtained results on the basis of solvent surface energy and Hildebrand/Hansen solubility parameters. Estimates of the three Hansen parameters for exfoliated g-C3N4 from the experimentally derived data yielded δD ≈ 17.8 MPa(1/2), δP ≈ 10.8 MPa(1/2), and δH ≈ 15.4 MPa(1/2). The relatively high δH value suggested that, contrary to the case of other two-dimensional materials (e.g., graphene or transition metal dichalcogenides), hydrogen-bonding plays a substantial role in the efficient interaction, and thus dispersibility, of exfoliated g-C3N4 with solvents. Such an outcome was attributed to a high density of primary and/or secondary amines in the material, the presence of which was associated with incomplete condensation of the structure. Furthermore, cell proliferation tests carried out on thin films of exfoliated g-C3N4 using murine fibroblasts suggested that this material is highly biocompatible and noncytotoxic. Finally, the exfoliated g-C3N4 flakes were used as supports in the synthesis of Pd nanoparticles, and the resulting hybrids exhibited an exceptional catalytic activity in the reduction of nitroarenes.

Achieving extremely concentrated aqueous dispersions of graphene flakes and catalytically efficient graphene-metal nanoparticle hybrids with flavin mononucleotide as a high-performance stabilizer.

The stable dispersion of graphene flakes in an aqueous medium is highly desirable for the development of materials based on this two-dimensional carbon structure, but current production protocols that make use of a number of surfactants typically suffer from limitations regarding graphene concentration or the amount of surfactant required to colloidally stabilize the sheets. Here, we demonstrate that an innocuous and readily available derivative of vitamin B2, namely the sodium salt of flavin mononucleotide (FMNS), is a highly efficient dispersant in the preparation of aqueous dispersions of defect-free, few-layer graphene flakes. Most notably, graphene concentrations in water as high as ∼50 mg mL(-1) using low amounts of FMNS (FMNS/graphene mass ratios of about 0.04) could be attained, which facilitated the formation of free-standing graphene films displaying high electrical conductivity (∼52000 S m(-1)) without the need of carrying out thermal annealing or other types of post-treatment. The excellent performance of FMNS as a graphene dispersant could be attributed to the combined effect of strong adsorption on the sheets through the isoalloxazine moiety of the molecule and efficient colloidal stabilization provided by its negatively charged phosphate group. The FMNS-stabilized graphene sheets could be decorated with nanoparticles of several noble metals (Ag, Pd, and Pt), and the resulting hybrids exhibited a high catalytic activity in the reduction of nitroarenes and electroreduction of oxygen. Overall, the present results should expedite the processing and implementation of graphene in, e.g., conductive inks, composites, and hybrid materials with practical utility in a wide range of applications.

Surface modification of high-performance polymeric fibers by an oxygen plasma. A comparative study of poly(p-phenylene terephthalamide) and poly(p-phenylene benzobisoxazole).

Poly(p-phenylene terephthalamide) (PPTA) and poly(p-phenylene benzobisoxazole) (PBO) fibers were exposed to an oxygen plasma under equivalent conditions. The resulting changes in the surface properties of PPTA and PBO were comparatively investigated using inverse gas chromatography (IGC) and atomic force microscopy (AFM). Both non-polar (n-alkanes) and polar probes of different acid-base characteristics were used in IGC adsorption experiments. Following plasma exposure, size-exclusion phenomena, probably associated to the formation of pores (nanoroughness), were detected with the largest n-alkanes (C(9) and C(10)). From the adsorption of polar probes, an increase in the number or strength of the acidic and basic sites present at the fiber surfaces following plasma treatment was detected. The effects of the oxygen plasma treatments were similar for PPTA and PBO. In both cases, oxygen plasma introduces polar groups onto the surfaces, involving an increase in the degree of surface nanoroughness. AFM measurements evidenced substantial changes in the surface morphology at the nanometer scale, especially after plasma exposure for a long time. For the PBO fibers, the outermost layer - contaminant substances - was removed thanks to the plasma treatment, which indicates that this agent had a surface cleaning effect.

A comparison between physically and chemically driven etching in the oxidation of graphite surfaces.

The etching of graphite surfaces by two different types of oxidative treatments, namely dielectric barrier discharge (DBD) air plasma and ultraviolet-generated ozone (UVO), has been investigated and compared by means of scanning tunneling microscopy (STM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Although the attack is initiated in both cases with the formation of individual, isolated atomic-scale defects (in particular, atomic vacancies), its subsequent evolution indicated that different mechanisms drive the surface modification in the two types of treatment, which greatly differ in etching selectivity. Thus, physical processes (i.e., ion bombardment) dominate the attack by DBD air plasma, which are not present in the case of UVO oxidation. The effects of the different etching mechanisms on the graphite surface structure, as visualized by STM down to the atomic scale, are discussed and found to be consistent with the Raman spectroscopy and XPS data. This type of information can be relevant when selecting the most appropriate type of surface modification of carbon materials for specific purposes.

Atomic force and scanning tunneling microscopy imaging of graphene nanosheets derived from graphite oxide.

Graphene nanosheets produced in the form of stable aqueous dispersions by chemical reduction of graphene oxide and deposited onto graphite substrates have been investigated by atomic force and scanning tunneling microscopy (AFM/STM). The chemically reduced graphene oxide nanosheets were hardly distinguishable from their unreduced counterparts in the topographic AFM images. However, they could be readily discriminated through phase imaging in the attractive regime of tapping-mode AFM, probably because of differences in hydrophilicity arising from their distinct oxygen contents. The chemically reduced nanosheets displayed a smoothly undulated, globular morphology on the nanometer scale, with typical vertical variations in the subnanometer range and lateral feature sizes of approximately 5-10 nm. Such morphology was attributed to be the result of significant structural disorder in the carbon skeleton, which originates during the strong oxidation that leads to graphene oxide and remains after chemical reduction. Direct evidence of structural disorder was provided by atomic-scale STM imaging, which revealed an absence of long-range periodicity in the graphene nanosheets. Only structured domains a few nanometers large were observed instead. Likewise, the nanosheet edges appeared atomically rough and ill-defined, though smooth on the nanometer scale. The unreduced graphene oxide nanosheets could only be imaged by STM at very low tunneling currents (approximately 1 pA), being visualized in some cases with inverted contrast relative to the graphite substrate, a result that was attributed to their extremely low conductivity. Complementary characterization of the unreduced and chemically reduced nanosheets was carried out by thermogravimetric analysis as well as UV-visible absorption and X-ray photoelectron and Raman spectroscopies. In particular, the somewhat puzzling Raman results were interpreted to be the result of an amorphous character of the graphene oxide material.

Graphene oxide dispersions in organic solvents.

The dispersion behavior of graphene oxide in different organic solvents has been investigated. As-prepared graphite oxide could be dispersed in N, N-dimethylformamide, N-methyl-2-pyrrolidone, tetrahydrofuran, and ethylene glycol. In all of these solvents, full exfoliation of the graphite oxide material into individual, single-layer graphene oxide sheets was achieved by sonication. The graphene oxide dispersions exhibited long-term stability and were made of sheets between a few hundred nanometers and a few micrometers large, similar to the case of graphene oxide dispersions in water. These results should facilitate the manipulation and processing of graphene-based materials for different applications.

Multiscale imaging and tip-scratch studies reveal insight into the plasma oxidation of graphite.

The plasma oxidation process of highly oriented pyrolytic graphite (HOPG) has been investigated through a combination of multiscale (micrometric to atomic) imaging by atomic force and scanning tunneling microscopies (AFM/STM) and STM tip-scratching of the HOPG substrate. Complementary information was obtained by Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Repetitive imaging of the same HOPG location following a series of consecutive plasma treatments allowed an accurate determination of the plasma etch rates along both the a and c crystallographic directions of the graphite lattice. The etch rates were typically in the range of a few nm per min along the a axis, and the equivalent of 1-6 graphene layers per min along the c axis. The results pointed to the existence of two main plasma etching regimes, related to short (<20-30 min) and long (> or =30 min) treatment times. This was inferred not only from the measured plasma etch rates but also from the observation of fundamental differences in the atomic-scale surface structure of the plasma-treated HOPG samples, and from the general mechanical behavior of the materials under the action of the AFM tip. In particular, atomic-scale STM imaging suggested a change from a defected, but essentially graphitic, surface in the first regime to an amorphous carbon surface in the second regime. Together with AFM and STM, Raman spectroscopy and XPS provided a consistent picture of the surface structure and chemistry of the plasma-modified HOPG in the two regimes. The implications of these results as well as the possible mechanism that drives the plasma etching process in the two regimes are discussed.

A microscopic view of physical and chemical activation in the synthesis of porous carbons.

The nanostructure and porosity of activated carbon fibers (ACFs) prepared by physical activation with CO2 and by chemical activation with H3PO4 of the highly ordered polymer poly(m-phenylene isophthalamide) have been investigated and compared by means of scanning tunneling microscopy (STM), scanning electron microscopy (SEM), and gas adsorption measurements. In general terms, both types of activation led to porous carbons with similar nanometer-scale structure, which consisted of relatively ordered and homogeneous arrays of platelets below 10-nm wide, the porous structure being mainly comprised by the network of narrow trenches present between neighboring platelets. This similarity was attributed to the influence of the crystalline structure of the polymeric precursor, which should favor a homogeneous, uniform transformation of the polymer into the final carbon material. Such influence was only lost in chemical activation with the use of very large amounts of activating agent. A comparison of samples before and after physical activation allowed a direct identification of the local areas where gasification (activation) took place. For chemical activation, the STM measurements suggested that porosity was developed at a lower temperature than the highly cross-linked nanographitic structure of the final ACF. This result was discussed in terms of the thermal transformation mechanism of the precursor polymer into a carbonaceous solid in the presence of H3PO4.

Real-time monitoring of polymer swelling on the nanometer scale by atomic force microscopy.

The swelling of a polymer surface has been monitored in real time on the nanometer scale by atomic force microscopy (AFM). After modification by oxygen plasma treatment, poly(p-phenylene terephthalamide) (PPTA) displays a characteristic nanostructured surface morphology consisting of high-lying features alternating with topographically depressed areas. Selective swelling of the least cross-linked, depressed areas after the adsorption of ambient water or water from saturated humid atmospheres was observed by tapping mode AFM operated in the attractive interaction regime. The swollen areas could be distinguished from the nonswollen ones by local variations in the sample indentation made by the AFM tip when imaging in the tapping mode repulsive interaction regime. Monitoring the swelling of the plasma-treated polymer surface provided a means to reveal the nanometer-scale heterogeneity that this type of treatment creates on the polymer surface, which is something that would not be possible otherwise. Measurement of AFM tip-sample adhesion forces evidenced rapid water adsorption onto the oxygen plasma-treated surface, supporting the idea of water-induced swelling. This high hydrophilicity was interpreted as arising from the incorporation of polar oxygen functionalities, as demonstrated by X-ray photoelectron spectroscopy (XPS).

Surface characterisation of plasma-modified poly(ethylene terephthalate).

This paper reports the modifications produced by nitrogen and helium cold plasmas on the surface of PET. The changes have been studied by diffuse reflectance Fourier transform spectroscopy (DRIFTS), atomic force microscopy (AFM) and inverse gas-solid chromatography (IGSC). Nitrogen and oxygen atoms seem to appear on the surface of PET as a consequence of the exposure to the atmosphere after the treatments with plasmas. AFM shows that both plasmas altered in different extent the surface of PET as they break the polymer chains producing low molecular products which appear as bumps on the surface. The surface area and the porosity of PET does not change by plasma treatments even after 15 min. The dispersive component of the surface free energy, gamma(s)(d), decreases after long treatments with nitrogen plasma whereas it remains almost unchanged after long treatment with helium plasma.

Structural investigation of zeolite-templated, ordered microporous carbon by scanning tunneling microscopy and Raman spectroscopy.

Scanning tunneling microscopy (STM) and Raman spectroscopy have been employed for a detailed structural characterization of an ordered microporous carbon synthesized in the nanochannels of zeolite Y by a templating approach. The carbon exhibited an exceptionally high adsorption capacity together with a long-range structural organization on the nanometer scale. As revealed by STM, this material exhibited both terrace-like and periodic (approximately 1.4 nm) stripe-like nanostructures. The vertical separation between contiguous terraces was measured to be also about 1.4 nm and was thus coincident with the structural periodicity deduced by X-ray diffraction. The terraces of the carbon material were shown to consist of arrays of approximately 1 nm wide carbon clusters. The carbon clusters displayed only a limited degree of local order within the terraces but not long-range periodicity. Likewise, STM indicated that the micropore structure of this carbon originated from the large number of voids that separate adjacent clusters, being morphologically very different from that commonly found in activated carbons. The range of void sizes measured by STM (0.8-2.3 nm) was in complete agreement with the pore size distribution determined from nitrogen adsorption measurements. The origin of the nanostructural features observed for this microporous carbon was discussed on the basis of the surface structure of the zeolite Y template. Finally, Raman spectroscopy provided evidence that the carbon clusters were made up of nanographenes with a curved topology.

Nanoscale investigation of the structural and chemical changes induced by oxidation on carbon black surfaces: a scanning probe microscopy approach.

Scanning tunneling microscopy (STM) and noncontact tapping mode atomic force microscopy (AFM) have been employed to study on a local scale the structural and, for the first time, the chemical changes of carbon black (CB) particles following plasma oxidation. STM imaging of the pristine, untreated particles revealed a relatively ordered structure of tiny crystallites with a few amorphous regions. After plasma treatment, the crystallites were no longer observed and the CB particle surface exhibited a noticeable and ubiquitous increase in atomic-scale disorder. Phase contrast images obtained with noncontact tapping mode AFM indicated that the untreated CB particles were essentially hydrophobic as a pristine basal surface of graphite, but with occasional hydrophilic patches. By contrast, their plasma-treated counterparts displayed enhanced hydrophilicity as a result of the introduction of oxygen onto the CB surface, the presence of which was evidenced by X-ray photoelectron spectroscopy, but most significantly, such enhancement was observed to be quite uniform at a local scale of individual particles. The possibility of investigating on a very local scale the chemical behavior of oxidized CB particles should be useful for the control and optimization of their dispersion properties in different systems.

Effects of oxygen and carbon dioxide plasmas on the surface of poly(ethylene terephthalate).

Poly(ethylene terephthalate) was exposed to oxygen and carbon dioxide plasmas for different periods of time. The surface-modified samples were characterized by infrared spectroscopy, atomic force microscopy, and inverse gas-solid chromatography. The main difference between both types of plasma was connected to the time scale of degradation, which was much faster when using oxygen plasma. Aggregate globular features were produced by different treatments due to chain scission and further recombination of evolved products. Oxygenated functionalities were introduced in significant amounts after long exposure times to the oxygen plasma. As a consequence, the specific component of the surface free energy was clearly observed to increase after these long treatments.