RESUMEN
Inkjet printing, a highly promising technique for the cost-effective fabrication of large-scale organic light-emitting devices (OLEDs), typically necessitates the intricate alignment of precisely patterned insulating layers. Recently, we introduced a unique single-step inkjet printing process that produces well-patterned microinlaid spots of functional compounds through insulating polymer layers. This approach exploits lateral phase separation between the solute of functional compounds and the polymer, allowing the simultaneous spatial etching of the polymer and the infilling of the solute using a single inkjet-printed sessile droplet. Here, we demonstrate that the interaction between the solvent and polymer, as well as the solute and polymer, critically determines the precision and efficiency of printing. This is particularly evident when using either the insulating poly(vinylpyridine) isomer of poly(4-vinylpyridine) (P4VP) or poly(2-vinylpyridine) (P2VP) with chloroform as a solvent, which allows for a detailed examination of these interactions based on certain solubility parameters. Micro-Raman spectroscopy reveals that the self-organizing capability of the microinlaid spots with P4VP is superior to that with P2VP. This is due to the fact that P2VP shows higher affinity to the solvent and causes imperfect phase separation as compared to P4VP. As a result, a performance evaluation demonstrates enhanced device performance for inkjet-printed green micro-OLEDs with P4VP, exhibiting a higher external quantum efficiency of 3.3% compared to that of 2.3% achieved with P2VP. These findings elucidate the important roles of solvent-polymer and solute-polymer interactions in the inkjet printing process, leading to interfacial control of inkjet printing technique for the cost-effective production of high-performance and high-resolution micro-OLEDs.
RESUMEN
For several years now, organic-inorganic hybrid perovskite materials have shown remarkable progress in the field of opto-electronic devices. Herein, we introduce a cathode-side passivation layer of poly(methyl methacrylate) (PMMA) for a highly efficient and stable self-powered CH3NH3PbI3 perovskite-based photodiode. For effective noise-current suppression, the PMMA passivation layer was employed between a light-absorbing layer of CH3NH3PbI3 (MAPbI3) perovskite and an electron transport layer of [6,6]-phenyl-C61-butyric acid methyl ester. Due to its passivation effect on defects in perovskite film, the PMMA passivation layer can effectively suppress interface recombination and reduce the leakage/noise current. Without external bias, the MAPbI3 photodiode with the PMMA layer demonstrated a significantly high specific detectivity value (~1.07 × 1012 Jones) compared to that of a conventional MAPbI3 photodiode without a PMMA layer. Along with the enhanced specific detectivity, a wide linear dynamic response (~127 dB) with rapid rise (~50 µs) and decay (~17 µs) response times was obtained. Furthermore, highly durable dynamic responses of the PMMA-passivated MAPbI3 photodiode were observed even after a long storage time of 500 h. The results achieved with the cathode-side PMMA-passivated perovskite photodiodes represent a new means by which to realize highly sensitive and stable self-powered photodiodes for use in developing novel opto-electronic devices.
RESUMEN
Organohalide perovskite materials and related optoelectronic applications have drawn significant attention due to their promising high-performance photon-to-electricity conversion efficiencies. Herein, we demonstrate a highly sensitive self-powered perovskite-based photodetector created with a noise-current-suppressible passivation layer of poly(methyl methacrylate) (PMMA) at the interface between a CH3NH3PbI3 light-absorbing layer and a NiOx hole-transporting layer. Along with the defect passivation effect, the PMMA layer effectively diminishes unwanted carrier recombination losses at the interface, resulting in a significant reduction of the leakage/noise current. Consequently, without external bias, a remarkably high level of specific detectivity (â¼4.5 × 1013 Jones from the dark current and â¼0.81 × 1012 Jones from the noise current) can be achieved due to the use of the PMMA passivation layer, greatly exceeding those of conventional unpassivated perovskite devices. Moreover, we observed a very wide linear dynamic response range of â¼129â dB together with rapid rise and decay response times of â¼52 and â¼18 µs, respectively. Overall, these results provide a solid foundation for advanced interface-engineering to realize high-performance self-powered perovskite photodetectors for various optoelectronic applications.
RESUMEN
Ensuring the long-term stability of high-performance organic light-emitting diodes (OLEDs) has remained a great challenge due to their limited lifetime and durability. Herein, a novel functional interlayer consisting of a poly(amic acid)-polyimide copolymer is introduced for use in OLEDs. It is shown that an OLED sample with a polyimide-copolymer interlayer exhibits high peak brightness of nearly 96 000 cd m-2 and efficiency of ≈92 cd A-1 , much higher than those (≈73 000 cd m-2 and ≈83 cd A-1 ) of a well-organized reference OLED. Moreover, the growth of dark spots is strongly suppressed in the sample OLED and the device lifetime is extended considerably. Further, highly stable and uniform large-area OLEDs are successfully produced when using the interlayer. These improvements are ascribed not only to the excellent film-forming and hole-transferring properties but also to the inner passivating capability of the polyimide-copolymer interlayer. The results here suggest that the introduction of an inner passivating/encapsulating hole-transferable polyimide-copolymer interlayer together with conventional external encapsulation technology represents a promising breakthrough that enhances the longevity of high-performance next-generation OLEDs.
RESUMEN
Recently, van der Waals heterostructures (vdWHs) based on transition-metal dichalcogenides (TMDs) have attracted significant attention owing to their superior capabilities and multiple functionalities. Herein, a novel vdWH field-effect transistor (FET) composed of molybdenum ditelluride (MoTe2 ) and palladium diselenide (PdSe2 ) is studied for highly sensitive photodetection performance in the broad visible and near-infrared (VNIR) region. A high rectification ratio of 6.3 × 105 is obtained, stemming from the sharp interface and low Schottky barriers of the MoTe2 /PdSe2 vdWHs. It is also successfully demonstrated that the vdWH FET exhibits highly sensitive photo-detecting abilities, such as noticeably high photoresponsivity (1.24 × 105 A W-1 ), specific detectivity (2.42 × 1014 Jones), and good external quantum efficiency (3.5 × 106 ), not only due to the intra-TMD band-to-band transition but also due to the inter-TMD charge transfer (CT) transition. Further, rapid rise (16.1 µs) and decay (31.1 µs) times are obtained under incident light with a wavelength of 2000 nm due to the CT transition, representing an outcome one order of magnitude faster than values currently in the literature. Such TMD-based vdWH FETs would improve the photo-gating characteristics and provide a platform for the realization of a highly sensitive photodetector in the broad VNIR region.
RESUMEN
Hybrid organic-inorganic perovskite materials provide noteworthy compact systems that could offer ground-breaking architectures for dynamic operations and advanced engineering in high-performance energy-harvesting optoelectronic devices. Here, we demonstrate a highly effective self-powered perovskite-based photodiode with an electron-blocking hole-transport layer (NiOx). A high value of responsivity (R = 360 mA W-1) with good detectivity (D = 2.1 × 1011 Jones) and external quantum efficiency (EQE = 76.5%) is achieved due to the excellent interface quality and suppression of the dark current at zero bias voltage owing to the NiOx layer, providing outcomes one order of magnitude higher than values currently in the literature. Meanwhile, the value of R is progressively increased to 428 mA W-1 with D = 3.6 × 1011 Jones and EQE = 77% at a bias voltage of - 1.0 V. With a diode model, we also attained a high value of the built-in potential with the NiOx layer, which is a direct signature of the improvement of the charge-selecting characteristics of the NiOx layer. We also observed fast rise and decay times of approximately 0.9 and 1.8 ms, respectively, at zero bias voltage. Hence, these astonishing results based on the perovskite active layer together with the charge-selective NiOx layer provide a platform on which to realise high-performance self-powered photodiode as well as energy-harvesting devices in the field of optoelectronics.
RESUMEN
Since the innovation of van der Waals heterostructures of 2D materials, the p-n junction diode, a building block of electronics and opto-electronics has been studied in various ways. To date most of them have been studied on SiO2 or other oxide substrates, although the oxide substrates cause significant degradation of the 2D material's intrinsic properties and device performances. Whereas using hexagonal boron nitride (h-BN) as an underlying layer to the 2D materials is known to preserve their properties. Here we have carefully analyzed the electrical and opto-electrical properties of a p-WSe2/n-WS2 van der Waals heterojunction diode on SiO2 and the h-BN substrates. Besides the usual enhancement of the field-effect mobility of WSe2 and WS2, we have achieved a significant enhancement of the diode rectification ratio and excellent photovoltaic characteristics on the h-BN substrate. We have obtained more than an order-of-magnitude enhancement of the diode rectification ratio and about two-fold increments in the overall opto-electronics behavior on the h-BN substrate compared with those on the SiO2 substrate. The values of self-powered photo responsivity and external quantum efficiency are 3 A/W and 588% respectively on the h-BN substrate at 10 mW cm-2 photo-power density and 633 nm wavelength, whereas they reduce to about one-half on the SiO2 substrate.
RESUMEN
We herein present the results of a study on the novel fabrication process of uniform and homogeneous semiconducting polymer layers, in this case hole-injecting and fluorescent light-emitting layers that were produced by a simple solution-coating process for 3D conformal organic light-emitting diodes (3D OLEDs) on curvilinear surfaces. The solution-coating process used was a newly developed method of vortex-flow-assisted solution-coating with the support of spinning of the coating solution. It is shown that the vortex-flow-assisted spin-coating process can produce high-quality thin films at nanoscale thicknesses by controlling the liquid surface of the coating solutions, which can easily be adjusted by changing the spinning speed, even on complex curvilinear surfaces, i.e., a quasi-omnidirectional coating. This excellent film-forming ability without any serious film defects is mainly due to the reduction of line tension among the solution, air, and the substrate at the contact line due to vortex flows of the coating solution on the substrate during the vortex-spin-coating process. As a proof of concept, we present vortex-spin-coated 3D OLEDs fabricated on bi-convex lens substrates which exhibit excellent device performance with high brightness and current efficiency levels comparable to those of a conventional spin-coated 2D planar OLED on a flat substrate. It is also shown that the EL emission from the 3D OLED on the bi-convex lens substrate exhibits a diffusive Lambertian radiation pattern. The results here demonstrate that the vortex-flow-assisted spin-coating process is a promising approach for producing efficient and reliable next-generation OLEDs for 3D conformal opto-electronics.
RESUMEN
Spin-coated self-assemblies of colloidal particles have been developed recently as an attractive close-packed monolayer of the particles for a variety of applications, but they are limited by the small area of their monolayers, especially given their low uniformity and monolayer coverage on large-area substrates. We report several noteworthy characteristics of a close-packed monolayer of polystyrene nanospheres (PS NSs) fabricated using a simple and inexpensive spin-coating method with a PS NS suspension mixed using the nonionic surfactant polyoxyethylene (12) tridecyl ether (PEO-TDE). In our study, we show that the PEO-TDE surfactant offers excellent wettability, surface tension, and a slow solvent evaporation rate of the PS NS suspension, similar to the conventional surfactant Triton X-100. We demonstrate that the relatively high monolayer coverage with reduced defects is produced when introducing the PEO-TDE surfactant. Specifically, monolayer coverage of more than 95% on a Si substrate was achieved, which is much better than that with the typical Triton X-100, and is one of the highest coverage rates realized by a spin-coating method. This excellent uniformity of the PS NS monolayer with high monolayer coverage is mainly attributed to the relatively low viscosity of the PS NS suspension, even at high concentrations of PEO-TDE. Moreover, the PEO-TDE surfactant provides highly uniform monolayers on a large-scale glass substrate even for large-sized PS NSs. We also highlight the fact that the PEO-TDE surfactant has another advantage in that the spin-coating process of the PS NS suspension can be done under common ambient laboratory conditions, unlike those required for the highly toxic Triton X-100. We therefore conclude that PEO-TDE can be a useful surfactant during the fabrication of close-packed monolayers for various applications owing to its simple and straightforward control of PS NSs, its uniform and high surface coverage, and due to the safety of the fabrication process.
RESUMEN
Polymeric light-emitting materials have been developed recently as an attractive solution-processable alternative to conventional vacuum-deposited small molecules in organic/polymeric light-emitting diodes, but they are still limited in terms of their performance, especially with low luminance and efficiency. We report on some noteworthy characteristics of a new type of single emitting layer (EML), composed of a blend of a host blue-emitting polyspirobifluorene-based copolymer and a guest yellow-emitting poly(p-phenylene vinylene) derivative copolymer. These host and guest polymers have nearly identical highest occupied molecular orbital levels of about 5.2 eV, and lowest unoccupied molecular orbital levels of about 2.4 eV and 2.9 eV, respectively, minimizing the prevailing charge-trapping properties of their blend. Even in the absence of the charge-trapping effect, it is shown that very bright green electroluminescent (EL) emission with a maximum luminance of ~142,000 cd/m2 can be realized for the blended host:guest EML at a moderate concentration (~5 wt%) of the guest polymer. Current efficiency is also observed to be up to ~14 cd/A, which is much higher than those (3.6~5.1 cd/A) of reference devices with pure host or pure guest polymeric EMLs. Moreover, there is a small change in green color emission, with CIE coordinates of (0.35, 0.60) even at high luminance, showing good color stability of the EL emission from the blended EML. These significant improvements in device performance are mainly attributed to efficient Förster resonance energy transfer between the host and guest polymers in the blended EML. Together with its simple structure and easy processability, the high brightness and efficiency of our blended polymeric EML provides a new platform for the development of solution-processable light-emitting devices and/or advanced emissive display devices.
RESUMEN
Surface-emitting organic light-emitting transistors (OLETs) could well be a core element in the next generation of active-matrix (AM) displays. We report some of the key characteristics of graphene-based vertical-type organic light-emitting transistors (Gr-VOLETs) composed of a single-layer graphene source and an emissive channel layer. It is shown that FeCl3 doping of the graphene source results in a significant improvement in the device performance of Gr-VOLETs. Using the FeCl3-doped graphene source, it is demonstrated that the full-surface electroluminescent emission of the Gr-VOLET can be effectively modulated by gate voltages with high luminance on/off ratios (~104). Current efficiencies are also observed to be much higher than those of control organic light-emitting diodes (OLEDs), even at high luminance levels exceeding 500 cd/m2. Moreover, we propose an operating mechanism to explain the improvements in the device performance i.e., the effective gate-bias-induced modulation of the hole tunnelling injection at the doped graphene source electrode. Despite its inherently simple structure, our study highlights the significant improvement in the device performance of OLETs offered by the FeCl3-doped graphene source electrode.
RESUMEN
High electrical conductivity of metal oxide thin films needs uniform surface coverage, which has been the issue for the thin films based on electrospun nanofibers (NFs) that have advantage over the sputtered/spin-coated films with respect to large surface area and mechanical flexibility. Herein, we investigated a reduction in the sheet resistance of electrospun indium tin oxide (ITO) NF films with improved surface coverage. We found that the surface coverage depends significantly on the electrospinnable polymer concentration in the precursor solutions, especially after post-hot-plate annealing following the infrared radiation furnace treatment. The postannealing process increases crystallinity and oxygen vacancies. However, with a higher PVP content, it makes the surface of ITO NFs more prominently rough as a result of the formation of larger sphere-shaped ITO particles on the NF surface, which gives rise to poor surface coverage. A less poly(vinylpyrrolidone) (PVP) content in ITO NF films by electrospinning for short deposition times was found to improve surface coverage even after postannealing. The sheet resistance notably decreases, down to as low as 350 Ω/sq, with a high transmittance of over 90%. Our study provides an understanding on how to achieve high electrical conductivity of ITO NF films with high surface coverage, which can be utilized for the optoelectronic and sensing applications.
RESUMEN
Atmospheric-pressure plasma (APP) has received attention due to its generation of various kinds of reactive oxygen/nitrogen species (ROS/RNS). The controllability, as well as the complexity, is one of the strong points of APP in various applications. For biological applications of this novel method, the cytotoxicity should be estimated at various levels. Herein, we suggest red blood cell (RBC) as a good cell model that is simpler than nucleated cells but much more complex than other lipid model systems. Air and N2 gases were compared to verify the main ROS/RNS in cytotoxicity, and microscopic and spectroscopic analyses were performed to estimate the damages induced on RBCs. The results shown here will provide basic information on APP-induced cytotoxicity at cellular and molecular levels.
Asunto(s)
Presión Atmosférica , Eritrocitos/efectos de los fármacos , Radicales Libres/química , Animales , Células Cultivadas , Perros , Hemólisis/efectos de los fármacos , Peróxido de Hidrógeno/metabolismo , Espectroscopía de Resonancia Magnética , Óxidos de Nitrógeno/metabolismo , Especies de Nitrógeno Reactivo/metabolismo , Especies Reactivas de Oxígeno/metabolismo , Espectrometría RamanRESUMEN
Polarized emission that is beneficial to lighting and display applications can be demonstrated by aligning emissive chromophores, which can be achieved using an electrospinning technique. We investigate the photophysical properties of nanofibers based on poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]/poly(ethylene oxide) blends both with and without postsolvent treatments. Two different solvents were sequentially used in an attempt to extract the insulating electrospinnable polymer and increase the polarization ratio of the nanofiber meshes by molecular reorganization. The polarization ratio of emission from the nanofiber meshes treated with N,N-dimethylformamide (DMF) following treatment with acetonitrile solvents was found to be increased. An increase in the 0-0 emission vibronic intensity relative to that of the 0-1 peak and a reduction in the photoluminescence (PL) bandwidth were found. In addition, the PL decays faster and the parallel component along the nanofiber axis increases after the DMF treatment, indicating that the radiative recombination process becomes faster. Our results consistently show that postsolvent treatment promotes stronger J-aggregate character, with longer coherence lengths of the exciton along the long axis of the nanofibers, due to enhanced intrachain order.
RESUMEN
We herein report a homogeneous [6,6]-phenyl C61 butyric acid methyl ester (PCBM) layer, produced by a solution process of horizontal-dipping (H-dipping) to improve the photovoltaic (PV) effects of bilayer heterojunction organic photovoltaic cells (OPVs) based on a bi-stacked poly(3-hexylthiophene) (P3HT) electron donor layer and a PCBM electron acceptor layer (P3HT/PCBM). It was shown that a homogeneous and uniform coating of PCBM layers in the P3HT/PCBM bilayer OPVs resulted in reliable and reproducible device performance. We recorded a power conversion efficiency (PCE) of 2.89%, which is higher than that (2.00%) of bilayer OPVs with a spin-coated PCBM layer. Moreover, introducing surfactant additives of poly(oxyethylene tridecyl ether) (PTE) into the homogeneous P3HT/PCBM PV layers resulted in the bilayer OPVs showing a PCE value of 3.95%, which is comparable to those of conventional bulk-heterojunction (BHJ) OPVs (3.57-4.13%) fabricated by conventional spin-coating. This improved device performance may be attributed to the selective collection of charge carriers at the interfaces among the active layers and electrodes due to the PTE additives as well as the homogeneous formation of the functional PCBM layer on the P3HT layer. Furthermore, H-dip-coated PCBM layers were deposited onto aligned P3HT layers by a rubbing technique, and the rubbed bilayer OPV exhibited improved in-plane anisotropic PV effects with PCE anisotropy as high as 1.81, which is also higher than that (1.54) of conventional rubbed BHJ OPVs. Our results suggest that the use of the H-dip-coating process in the fabrication of PCBM layers with the PTE interface-engineering additive could be of considerable interest to those seeking to improve PCBM-based opto-electrical organic thin-film devices.
RESUMEN
We herein report an investigation of the device performance capabilities and impedance characteristics of solution-processed organic light-emitting devices (OLEDs) with all-water-processable triple-stacked hole-selective layers (HSLs) on an indium-tin-oxide (ITO) anode, fabricated using a simple coating technique. Highly smooth and homogeneous triple-stacked layers were deposited via horizontal-dip- (H-dip-) coating using aqueous dispersions of graphene oxide (GO), molybdenum oxide (MoO3), and poly(ethylenedioxy thiophene):poly(styrene sulfonate) ( PEDOT: PSS). From the triple-stacked GO/MoO3/ PEDOT: PSS HSLs used as hole-injection layers (HILs) in the OLEDs, which outperform a conventional single HIL of PEDOT: PSS, it was found that OLEDs with triple-stacked HILs exhibited characteristic impedance properties, including low parallel resistance with trap-free space-charge-limited conductivity. Furthermore, it was shown that the relaxation frequency of a sample OLED with triple-stacked GO/MoO3/ PEDOT: PSS HILs was much higher than that of a reference device with a single PEDOT: PSS HIL. These impedance behaviors indicate that carrier (hole) injection in the sample OLED is more efficient than that in any of the other devices tested here. The results presented here clarify that the triple-stacked GO/MoO3/ PEDOT: PSS layers can act as efficient HILs on an ITO anode, representing a remarkable advance in relation to the mass production of high-performance solution-processable OLEDs.
RESUMEN
We herein report on a remarkably simple, fast, and economic way of fabricating homogeneous and well oriented silver nanowires (AgNWs) that exhibit strong in-plane electrical and optical anisotropies. Using a small quantity of AgNW suspension, the horizontal-dip (H-dip) coating method was applied, in which highly oriented AgNWs were deposited unidirectionally along the direction of coating over centimetre-scale lengths very rapidly. In applying the H-dip-coating method, we adjusted the shear strain rate of the capillary flow in the Landau-Levich meniscus of the AgNW suspension, which induced a high degree of uniaxial orientational ordering (0.37-0.43) of the AgNWs, comparable with the ordering seen in archetypal nematic liquid crystal (LC) materials. These AgNWs could be used to fabricate not only transparent electrodes, but also LC-alignment electrodes for LC devices and/or polarising electrodes for organic photovoltaic devices, having the potential to revolutionise the architectures of a number of polarisation-selective opto-electronic devices for use in printed/organic electronics.
RESUMEN
We report on an investigation of water-processable triple-stacked hole-selective layers for solution-processable organic semiconducting devices using a simple horizontal-dip (H-dip) coating technique. Homogeneous layers were successfully deposited via H-dip-coating using aqueous solutions of graphene oxide (GO), molybdenum oxide (MoO3), and poly(ethylenedioxy thiophene):poly(styrene sulfonate) ( PEDOT: PSS). The use of the triple-stacked GO/MoO3/ PEDOT: PSS layers as hole-injecting layers (HILs) in solution-processable organic light-emitting diodes (OLEDs) resulted in a considerable improvement of device performance in terms of brightness (maximum brightness: 47,000 cd/m2) as well as efficiency (peak efficiency: 31.5 cd/A), exceeding those of an OLED with a conventional single PEDOT: PSS HIL. Furthermore, polymer solar cells (PSCs) with these triple-stacked layers used as hole-collecting layers (HCLs) showed a considerable improvement in power conversion efficiency (6.62%), which was also higher than that (5.65%) obtained using the single PEDOT: PSS HCL. These results clearly indicate the benefits of using triple-stacked GO/MoO3/ PEDOT: PSS layers, which provide better hole-injection/collection, electron-blocking, and improved stability for high performance solution-processable OLEDs and PSCs.
RESUMEN
We herein report the results of a study of a power generating reflective-type liquid crystal display (LCD), composed of a 90° twisted nematic (TN) LC cell attached to the top of a light-absorbing polymer solar cell (PSC), i.e., a Solar-LCD. The PSC consisted of a polymer bulk-heterojunction photovoltaic (PV) layer of poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl] and [6,6]-phenyl C71 butyric acid methyl ester (PCDTBT:PCBM70), and showed a high power conversion efficiency of about 5%. In order to improve the visibility of the Solar-LCD, between the TN-LC and the PV cells we inserted a reflective polariser of a giant birefringent optical (GBO) film. The reflectivity from the Solar-LCD was observed to be considerably increased by more than 13-15% under illumination by visible light. The Solar-LCD also exhibited a significantly improved contrast ratio of more than 17-19. We believe there is a clear case for using such Solar-LCDs in new power-generating reflective-type displays; taken as a whole these results also demonstrate the possibility of their application in a number of energy-harvesting opto-electrical display devices.
RESUMEN
Resistive switching random-access memory (ReRAM) devices based on chalcogenide solid electrolytes have recently become a promising candidate for future low-power nanoscale nonvolatile memory application. The resistive switching mechanism of ReRAM is based on the formation and rupture of conductive filament (CF) in the chalcogenide solid electrolyte layers. However, the random diffusion of metal ions makes it hard to control the CF formation, which is one of the major obstacles to improving device performance of ReRAM devices. We demonstrate the spin-coated metal nanocrystals (NCs) enhance the bipolar resistive switching (BRS) memory characteristics. Compared to the Ag/Ge0.5Se0.5/Pt structure, excellent resistive switching memory characteristics were obtained from the Ag/Ge0.5Se0.5/Ag NCs/Pt structure. Ag NCs improve the uniformity of resistance values and reduce the reset voltage and current. A stable DC endurance (> 100 cycles) and a high data retention (> 10(4) sec) were achieved by spin coating the Ag NCs on the Pt bottom electrode for ReRAMs.