RESUMEN
Polymeric vascular grafts have been widely used in the vascular regeneration field because of their ease of application. However, synthetic polymer grafts have the severe problem of low biocompatibility, which may cause delayed endothelialization and hyperplasia. In this study, we fabricated a linear hydroxyapatite (HA) pattern on a silicon wafer and then transferred the pattern to a poly(L-lactic)-acid (PLLA) film for use as a tubular vascular graft. The HA pattern with its characteristic needle-like shape was successfully embedded into the PLLA. The HA-patterned PLLA film exhibited superior mechanical stability compared with that of a HA-coated PLLA film under bending, elongation, and in vitro circulation conditions, suggesting its suitability for use as a tubular vascular graft. In addition, the HA pattern guided rapid endothelialization by promoting proliferation of endothelial cells and their migration along the pattern. The hemocompatibility of the HA-patterned PLLA was also confirmed, with substantially fewer platelets adhered on its surface. Overall, in addition to good mechanical stability, the HA-patterned PLLA exhibited enhanced biocompatibility and hemocompatibility compared with pure PLLA.
Asunto(s)
Durapatita/química , Ensayo de Materiales , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Plaquetas/citología , Plaquetas/metabolismo , Adhesión Celular/efectos de los fármacos , Durapatita/farmacología , Células Endoteliales de la Vena Umbilical Humana , Humanos , Poliésteres/química , Andamios del Tejido/química , Injerto Vascular/métodosRESUMEN
This study demonstrates the utility of hydroxyapatite (HA) microspheres as an additive to enhance the radiopaque properties, biocompatibility, and osteoconductivity of poly(methyl methacrylate) (PMMA)-based bone cements. HA microspheres were synthesized using spray drying. They had well-defined spherical shapes, thus allowing for the production of PMMA/HA composites with a very high HA content (20 vol % and 40 vol %). The uniform distribution of these HA microspheres in the PMMA matrix resulted in a remarkable increase in compressive modulus (p < 0.05), while preserving a reasonably high compressive strength. The PMMA/HA bone cements showed much higher radiopacity than PMMA containing BaSO4 as the additive. This was attributed to the high HA content up to 40 vol %. In addition, the biocompatibility and osteoconductivity of PMMA/HA bone cements were significantly enhanced compared to those of PMMA bone cements containing BaSO4, which were assessed using in vitro tests and in vivo animal experiments.
