RESUMEN
We designed and synthesized a new indolocarbazole-based polymer, poly(N,N-diphenyl(5,11-dihexylindolo[3,2,1-jk]carbazol-2-yl)amine) (PICA), for solution-processed organic light-emitting diodes (OLEDs). The highest occupied and lowest unoccupied molecular orbital energy levels of this polymer, -5.25 and -2.46 eV, respectively, are suitable for hole transport from the anode to the emissive layer. PICA was photo-crosslinked by UV irradiation with ethane-1,2-diyl bis(4-azido-2,3,5,6-tetrafluorobenzoate) (FPA) as the photoinitiator. Successful crosslinking was confirmed by a decreased intensity in the azide-stretching FT-IR peak and solvent test with toluene (a suitable solvent for PICA). The PICA film photo-crosslinked with 3 wt% FPA showed enhanced solvent resistance (90%) compared to the non-crosslinked neat PICA film (<20%). Moreover, OLED devices using PICA-based hole-transporting layers exhibited better device performance (EQE/LE/PE: 8.88%/12.97/8.12 in red devices, 10.84%/38.47 cd/A/25.06 lm/W in green devices) than those using poly-TPD:FPA. We demonstrated that the photo-crosslinked PICA can be applied as a hole-transporting layer in solution-processed OLEDs.
RESUMEN
The severely insufficient operational lifetime of perovskite light-emitting diodes (LEDs) is incompatible with the rapidly increasing external quantum efficiency, even as it approaches the theoretical limit, thereby significantly impeding the commercialization of perovskite LEDs. In addition, Joule heating induces ion migration and surface defects, degrades the photoluminescence quantum yield and other optoelectronic properties of perovskite films, and induces the crystallization of charge transport layers with low glass transition temperatures, resulting in LED degradation under continuous operation. Here, a novel thermally crosslinked hole transport material, poly(FCA60 -co-BFCA20 -co-VFCA20 ) (poly-FBV), with temperature-dependent hole mobility is designed, which is advantageous for balancing the charge injection of the LEDs and limiting the generation of Joule heating. The optimised CsPbI3 perovskite nanocrystal LEDs with poly-FBV realise approximately a 2-fold external quantum efficiency increase over the LED with commercial hole transport layer poly(4-butyl-phenyl-diphenyl-amine) (poly-TPD), owing to the balanced carrier injection and suppressed exciton quenching. Moreover, because of the Joule heating control provided by the novel crosslinked hole transport material, the LED utilising crosslinked poly-FBV has a 150-fold longer operating lifetime (490 min) than that utilizing poly-TPD (3.3 min). The study opens a new avenue for the use of PNC LEDs in commercial semiconductor optoelectronic devices.
RESUMEN
Compared to Ir(III) complexes with octahedral geometries, Pt(II) complexes with square planar geometries show superior optical properties because their flat shapes lead to an orientation that enhances the outcoupling of organic light-emitting diodes (OLEDs). However, the flat shapes of Pt(II) complexes typically induce a bathochromic shift, limiting their application in high-performance deep-blue phosphorescent OLEDs with high color purity. In this study, bulky trimethylsilyl (TMS)-substituted blue phosphorescent Pt(II) complex (PtON7-TMS) is successfully synthesized to improve color purity. The TMS substituent containing Si atom effectively suppresses intermolecular interaction and aggregation even when the complex concentration in the film state is higher than 30 wt %. As a result, the PtON7-TMS-based OLEDs exhibit a maximum external quantum efficiency of 21.4%, along with a pure-blue color of CIE (0.14, 0.09) at 20 wt % doping concentration and a full-width at half maximum of 30 nm. The pure blue color is maintained at a higher doping concentration (>30 wt %).
RESUMEN
Red and near-infrared (NIR) phosphorescent double-decker dinuclear Pt(II) complexes were synthesized, and their structural and spectroscopic properties were characterized. The Pt(II) complexes, which are composed of achiral ligands and are themselves chiral, were shown to exist as racemic mixtures using single-crystal X-ray crystallography. The Pt(II) complexes have different intramolecular Pt-Pt distances that are governed by the electronic characteristics of the component C^N ligands. Specifically, strengthening of π-back-donation between Pt(II) and N atom of the C^N ligand leads to shortening of the Pt-Pt distance. The results of both experimental and computational investigations show that the Pt-Pt distances in the dinuclear Pt(II) complexes significantly influence the band gap energies and corresponding emission wavelengths. Consequently, the uncovered C^N ligand based method to finely control intramolecular Pt-Pt distances in dinuclear Pt(II) complexes can be utilized as a guideline for the design of the double-decker dinuclear Pt(II) complexes with red and NIR tuned phosphorescence.
RESUMEN
3-(2-Octyldodecyl)thieno[3,2-b]thiophen was successfully synthesized as a new π-bridge with a long branched side alkyl chain. Two donor-π-bridge-acceptor type copolymers were designed and synthesized by combining this π-bridge structure, a fluorinated benzothiadiazole acceptor unit, and a thiophene or thienothiophene donor unit, (PT-ODTTBT or PTT-ODTTBT respectively) through Stille polymerization. Inverted OPV devices with a structure of ITO/ZnO/polymer:PC71BM/MoO3/Ag were fabricated by spin-coating in ambient atmosphere or N2 within a glovebox to evaluate the photovoltaic performance of the synthesized polymers (effective active area: 0.09 cm2). The PTT-ODTTBT:PC71BM-based structure exhibited the highest organic photovoltaic (OPV) device performance, with a maximum power conversion efficiency (PCE) of 7.05 (6.88 ± 0.12)%, a high short-circuit current (Jsc) of 13.96 mA/cm2, and a fill factor (FF) of 66.94 (66.47 ± 0.63)%; whereas the PT-ODTTBT:PC71BM-based device achieved overall lower device performance. According to GIWAXS analysis, both neat and blend films of PTT-ODTTBT exhibited well-organized lamellar stacking, leading to a higher charge carrier mobility than that of PT-ODTTBT. Compared to PT-ODTTBT containing a thiophene donor unit, PTT-ODTTBT containing a thienothiophene donor unit exhibited higher crystallinity, preferential face-on orientation, and a bicontinuous interpenetrating network in the film, which are responsible for the improved OPV performance in terms of high Jsc, FF, and PCE.
RESUMEN
An acrylate monomer containing cyclotetrasiloxane (CTS) were designed and synthesized for anti-fouling coating applications. New acryl-based copolymers consisting of styrene and CTS, poly(styrene-co-CTS)s, were synthesized by changing molar ratios via free radical polymerization. The properties of poly(styrene-co-CTS)s were compared with those of poly(styrene) (PS) as a reference. The content of CTS in the copolymer increased its hydrophobicity also decreased whereas its surface decreased. Protein adsorption studies were conducted to evaluate their fouling-release properties.
RESUMEN
Thermally cross-linkable host materials, DV-TPACZ, DV-TPADBCZ, and TV-TPBI, were designed and synthesized for solution-processed organic light-emitting diodes (OLEDs). The synthesized styrene-functionalized host materials were thermally cross-linked by curing at 150-200 °C without using a polymerization initiator. Excellent solvent resistance was observed for all cured host films. They exhibited low highest occupied molecular orbital energy levels of 5.4-5.7 eV, which indicated a low hole injection barrier from the hole transport layer to the emissive layer. A solution-processed red phosphorescent OLED with 5 wt% (MPHMQ)2Ir (tmd) dopant in the thermally cross-linkable DV-TPACZ host exhibited a current efficiency of 5.3 cd/A, power efficiency of 3.2 lm/W, and external quantum efficiency of 3.6%.
RESUMEN
We have synthesized and characterized a blue phosphorescent iridium(III) complex (dfpypy)2Ir(tftamp), which contains 2',6'-difluoro-2,3'-bipyridine (dfpypy) as the main ligand and 4-methyl-2-(3'-trifluoromethyl-1'H-1',2',4'-triazol-5'-yl)pyridine (tftamp) as the ancillary ligand. The photophysical, electrochemical, and electroluminescent (EL) properties of (dfpypy)2Ir(tftamp) were investigated. Vacuum-deposited blue and white organic light-emitting diodes (OLEDs) were fabricated using (dfpypy)2Ir(tftamp) in 1,3-bis(carbazol-9-yl)benzene (mCP) as the emitting layer. The EL spectrum of (dfpypy)2Ir(tftamp) exhibited emission maximum at 472 nm with a full-width at half-maximum (FWHM) of 81 nm and Commission Internationale de L'Eclairage (CIE) coordinates of (0.17, 0.27) at 100 cd · m-2. In addition, white-light-emitting devices were fabricated, which exhibited CIE coordinates of (0.42, 0.40) and a correlated color temperature (CCT) of 3,237 K at 1000 cd · m-2, close to the standard warm-white light CIE coordinates of (0.44, 0.40) and CCT of 3,000 K.
RESUMEN
A series of polystyrene (PS) copolymers containing 2,3,4,5,6-pentafluorostyrene units with different monomer ratios were prepared for antifouling applications. PS, poly(styrene-co-pentafluorostyrene) (poly(S-co-FS)), and poly(pentafluorostyrene) (PFS) were synthesized by free-radical polymerization and characterized by 1H NMR, Fourier-transform infrared spectroscopy, and gel permeation chromatography. The surface energy of the polymer films decreased with increasing content of fluorinated styrene. Protein adsorption experiments were carried out on the synthesized polymer films using fluorescein isothiocyanate-labeled bovine serum albumin as a fluorescent protein. The photo-luminescence intensity of the protein-adsorbed polymer films decreased dramatically as the content of hydrophobic fluorinated styrene increased, suggesting that poly(S-co-FS) copolymers and PFS could be used as potential antibiofouling coatings.
Asunto(s)
Polímeros , Poliestirenos , Adsorción , Interacciones Hidrofóbicas e Hidrofílicas , Polimerizacion , Polímeros/farmacología , Propiedades de SuperficieRESUMEN
Interfacial layers play a critical role in building up the Ohmic contact between electrodes and functional layers in organic photovoltaic (OPV) solar cells. These layers are based on either inorganic oxides (ZnO and TiO2) or water-soluble organic polymers such as poly[(9,9-dioctyl-2,7-fluorene)-alt-(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)] and polyethylenimine ethoxylated (PEIE). In this work, we have developed a series of novel poly(ionic liquid) nonconjugated block copolymers for improving the performance of inverted OPV cells by using them as work function modifiers of the indium tin oxide (ITO) cathode. Four nonconjugated polyelectrolytes (n-CPEs) based on polystyrene and imidazolium poly(ionic liquid) (PSImCl) were synthesized by reversible addition-fragmentation chain transfer polymerization. The ratio of hydrophobic/hydrophilic block copolymers was varied depending on the ratio of polystyrene to the PSImCl block. The ionic density, which controls the work function of the electrode by forming an interfacial dipole between the electrode and the block copolymers, was easily tuned by simply changing the PSImCl molar ratio. The inverted OPV device with the ITO/PS29-b-PSImCl60 cathode achieved the best power conversion efficiency (PCE) of 7.55% among the synthesized block copolymers, exhibiting an even higher PCE than that of the reference OPV device with PEIE (7.30%). Furthermore, the surface properties of the block copolymers films were investigated by contact angle measurements to explore the influence of the controlled hydrophobic/hydrophilic characters on the device performances.
RESUMEN
A new microporous Zr(IV)-based metal-organic framework (MOF) containing 4,4',4â³,4â´-(9,9'-spirobi[fluorene]-2,2',7,7'-tetrayl)tetrabenzoic acid (Spirof-MOF) was synthesized, characterized, and size-controlled for the adsorption and decomposition of a nerve agent simulant, dimethyl 4-nitrophenylphosphate (DMNP). Spirof-MOF showed a hydrolysis half-life (t1/2) of 7.5 min to DMNP, which was confirmed by using in situ 31P NMR spectroscopy. Additionally, size-controlled Spirof-MOFb (â¼1 µm) exhibited a half-life of 1.8 min and 99% removal within 18 min for DMNP. The results show that Spirof-MOF is a new active material in removing nerve agent simulants by adsorption and hydrolytic decomposition.
RESUMEN
We demonstrate that thin films of metal-organic framework (MOF)-like materials, containing two perylenediimides (PDICl4, PDIOPh2) and a squaraine dye (S1), can be fabricated by layer-by-layer assembly (LbL). Interestingly, these LbL films absorb across the visible light region (400-750 nm) and facilitate directional energy transfer. Due to the high spectral overlap and oriented transition dipole moments of the donor (PDICl4 and PDIOPh2) and acceptor (S1) components, directional long-range energy transfer from the bluest to reddest absorber was successfully demonstrated in the multicomponent MOF-like films. These findings have significant implications for the development of solar energy conversion devices based on MOFs.
RESUMEN
The synthesis of nano-sized particles of NU-1000 (length from 75 nm to 1200 nm) and PCN-222/MOF-545 (length from 350 nm to 900 nm) is reported. The catalytic hydrolysis of methyl paraoxon was investigated as a function of NU-1000 crystallite size and a significant enhancement in the rate was observed for the nano-sized crystals compared to microcrystals.
RESUMEN
On the basis of the results of frontier orbital considerations, 4-substituted-2'-pyridyltriazoles were designed to serve as ancillary ligands in 2-phenylpyridine main ligand containing heteroleptic iridium(III) complexes that display deep blue phosphorescence emission. The iridium(III) complexes, Ir1-Ir7, prepared using the new ancillary ligands, were found to display structured, highly quantum efficient (Φp = 0.20-0.42) phosphorescence with emission maxima in the blue to deep blue 448-456 nm at room temperature. In accord with predictions based on frontier orbital considerations, the complexes were observed to have emission properties that are dependent on the electronic nature of substituents at the C-4 position of the pyridine moiety of the ancillary ligand. Importantly, placement of an electron-donating methyl group at C-4' of the pyridine ring of the 5-(pyridine-2'-yl)-3-trifluoromethyl-1,2,4-triazole ancillary ligand leads to an iridium(III) complex that displays a deep blue phosphorescence emission maximum at 448 nm in both the liquid and film states at room temperature. Finally, an OLED device, constructed using an Ir-complex containing the optimized ancillary ligand as the dopant, was found to emit deep blue color with a CIE of 0.15, 0.18, which is close to the perfect goal of 0.15, 0.15.
Asunto(s)
Iridio/química , Sustancias Luminiscentes/química , Sustancias Luminiscentes/síntesis química , Compuestos Organometálicos/química , Compuestos Organometálicos/síntesis química , Triazoles/química , Cristalografía por Rayos X , Ligandos , Modelos Moleculares , Estructura MolecularRESUMEN
Photoaddition reactions of silyl ketene acetals with 2-, 3- and 4-acetylpyridine have been explored. The results show that the acetylpyridines react with an electron rich, dimethyl-substituted silyl ketene acetal via a pathway in which excited state single electron transfer (SET) takes place to produce ß-hydroxyesters in high yields. In contrast, photochemical reactions of the acetylpyridines with an electron deficient, nonmethyl-substituted silyl ketene acetal generate oxetanes as major products, which arise via a route involving excited state [2 + 2]-cycloaddition. In addition, an increase in solvent polarity significantly enhances the relative efficiencies of the SET processes versus [2 + 2]-cycloaddition reactions. Importantly, the carbonyl groups rather than the pyridine moieties in the acetylpyridine substrates participate in both types of addition reactions. Finally, the results demonstrate that photoinduced electron transfer (PET)-promoted chemical reactions between acetylpyridines and electron rich silyl ketene acetals in polar solvent serve as useful methods to promote ß-hydroxyester forming, Claisen or Mukaiyama condensation reactions under mild conditions.
Asunto(s)
Etilenos/química , Cetonas/química , Piridinas/química , Silanos/química , Reacción de Cicloadición , Estructura Molecular , FotoquímicaRESUMEN
Photochemical reactions of N-trimethylsilylmethyl-substituted uracil, pyridone and pyrrolidone derivatives were carried out to determine if silicone containing substituents have an impact on excited state reaction profiles. The results show that ultraviolet irradiation of N-trimethylsilylmethyl substituted uracils in the presence of substituted alkenes leads to efficient formation of both dimeric and cross [2+2]-cycloaddition products. Qualitatively similar observations were made in a study of the photochemistry of N-trimethylsilylmethyl-2-pyridone. The combined results demonstrate that [2+2]-photocycloaddition is a more efficient excited state reaction pathway for the uracil and pyridone substrates as compared to other processes, such as ylide-forming trimethylsilyl group C-to-O migration. Finally, photoreactions of N-trimethylsilylmethyl-2-pyrrolidone in solutions containing dipolarophiles, such as methyl acrylate, lead to the formation of the desilylation product, N-methyl-2-pyrrolidone by way of a simple, non-ylide generating, protodesilylation process. In addition, observations were made which show that orbital symmetry allowed photocycloreversion reactions of dimeric uracil derivatives, involving cyclobutane ring splitting, to take place. These processes, which lead to the formation of monomeric uracils, appear to be stimulated by the presence of electron donor groups on the cyclobutane ring, a likely result of a new SET promoted cyclobutane ring cleavage pathway. In the cases of N-trimethylsilylmethyl-substituted cyclobutane derivatives that possess phthalimide groups, highly efficient excited state cleavage of the cyclobutane moiety occurs to produce uracil derivatives and corresponding vinyl phthalimide.
Asunto(s)
Pirrolidinonas/química , Compuestos de Trimetilsililo/química , Uracilo/análogos & derivados , Acrilatos/química , Alquenos/química , Ciclización , Procesos Fotoquímicos , Silicio/química , Rayos UltravioletaRESUMEN
New types of tetrameric lignin model compounds, which contain the common ß-O-4 and ß-1 structural subunits found in natural lignins, have been prepared and carbon-carbon bond fragmentation reactions of their cation radicals, formed by photochemical (9,10-dicyanoanthracene) and enzymatic (lignin peroxidase) SET-promoted methods, have been explored. The results show that cation radical intermediates generated from the tetrameric model compounds undergo highly regioselective C-C bond cleavage in their ß-1 subunits. The outcomes of these processes suggest that, independent of positive charge and odd-electron distributions, cation radicals of lignins formed by SET to excited states of sensitizers or heme-iron centers in enzymes degrade selectively through bond cleavage reactions in ß-1 vs ß-O-4 moieties. In addition, the findings made in the enzymatic studies demonstrate that the sterically large tetrameric lignin model compounds undergo lignin peroxidase-catalyzed cleavage via a mechanism involving preliminary formation of an enzyme-substrate complex.
Asunto(s)
Antracenos/metabolismo , Carbono/metabolismo , Lignina , Nitrilos/metabolismo , Peroxidasas/metabolismo , Antracenos/química , Carbono/química , Catálisis , Cationes/metabolismo , Electrones , Fluorescencia , Tecnología Química Verde , Hemo/metabolismo , Peróxido de Hidrógeno/metabolismo , Hierro/metabolismo , Cinética , Lignina/análogos & derivados , Lignina/síntesis química , Lignina/metabolismo , Modelos Químicos , Nitrilos/química , Oxidación-Reducción , Procesos Fotoquímicos , Polimerizacion , EstereoisomerismoRESUMEN
Features of the oxidative cleavage reactions of diastereomers of dimeric lignin model compounds, which are models of the major types of structural units found in the lignin backbone, were examined. Cation radicals of these substances were generated by using SET-sensitized photochemical and Ce(IV) and lignin peroxidase promoted oxidative processes, and the nature and kinetics of their C-C bond cleavage reactions were determined. The results show that significant differences exist between the rates of cation radical C1-C2 bond cleavage reactions of 1,2-diaryl-(ß-1) and 1-aryl-2-aryloxy-(ß-O-4) propan-1,3-diol structural units found in lignins. Specifically, under all conditions C1-C2 bond cleavage reactions of cation radicals of the ß-1 models take place more rapidly than those of the ß-O-4 counterparts. The results of DFT calculations on cation radicals of the model compounds show that the C1-C2 bond dissociation energies of the ß-1 lignin model compounds are significantly lower than those of the ß-O-4 models, providing clear evidence for the source of the rate differences.
Asunto(s)
Carbono/química , Lignina/química , Simulación de Dinámica Molecular , Cationes/química , Radicales Libres/química , Cinética , Lignina/síntesis química , Estructura Molecular , Oxidación-Reducción , EstereoisomerismoRESUMEN
Photochemical reactions taking place between 1,2-diketones and silyl ketene acetals and their excited state reaction mechanisms have been explored. Irradiation of benzene, acetone, or acetonitrile solutions containing 1,2-diketones and silyl ketene acetals is observed to promote formation of 1,4-dioxenes, resulting from [4 + 2]-cycloaddition, oxetanes, arising by Paterno-Buchi processes, and beta-hydroxy-gamma-ketoesters, generated by SET-promoted Claisen-type condensation. These competitive pathways leading from the excited states of the 1,2-diketones to these products are influenced by solvent polarity and the nature of the silyl ketene acetal and 1,2-diketone. The Claisen-type condensation process, following an SET desilylation pathway and predominating when the photoreactions are carried out in the polar solvent acetonitrile, represents an efficient method to prepare a variety of diversely substituted beta-hydoxy-gamma-ketoesters.
RESUMEN
BACKGROUND: Treatment of transplant recipients with either 15-deoxyspergualin (DSG) or monoclonal antibodies (mAbs) to T-cell proteins CD45RB and CD154 (a two-signal blockade) has been shown to prolong islet graft survival. Therefore, we investigated the combined effect of DSG, anti-CD45RB, and anti-CD154 in murine islet model. METHODS: Chemically induced diabetic C57BL/6 mice underwent allografting with islets from BALB/c mice or xenografting with rat islets. After transplantation, they were treated with either DSG, the two-signal blockade, or both (the triple treatment). The tolerogenic effects of the posttransplant treatments were measured with an intraperitoneal glucose tolerance test (IPGTT), immunohistology, enzyme-linked immunosorbent assays, and flow cytometry. RESULTS: Blood glucose profiles measured after glucose challenges were improved in all islet recipients. Enhancement of xenograft survival in triple-treated groups was not statistically significant (P = 0.08), compared to graft survival in group received only the two-signal blockade. However, 15 days after transplantation, xenografts in the triple-treated group showed a significant decrease in the proportion of CD4, CD8, and CD4CD45RB T-cells, and in the expression of interleukin-10 and interferon-gamma, relative to grafts in the other treatment groups. In addition, reduced infiltration of the xenografts by CD3 T-cells was observed in groups that had received either the two-signal blockade or the triple treatment. With long-term (>248 days) xenografts, only those in the triple-treated group were free of inflammatory infiltrates. These grafts also exhibited larger islet clusters and contained more insulin- and glucagon-positive cells, relative to grafts in the other treatment groups. CONCLUSION: Triple treatment has a beneficial effect in murine islet xenotransplantation.