Surface Decoration of TiC Nanocrystals onto the Graphite Anode Enables Fast-Charging Lithium-Ion Batteries.

To significantly reduce the charging time of commercial lithium-ion batteries (LIBs), it is essential to control the surface properties of graphite anodes because the charging process involves sluggish interfacial kinetics between graphite and the electrolyte. For the effective surface modification of graphite, herein we demonstrate the surface decoration with titanium carbide (TiC) nanocrystals onto graphite particles via a simple wet-coating process. The high electrical conductivity, low Li+ adsorption energy, and small surface diffusion barrier of the TiC nanocrystals facilitate fast Li+ adsorption and migration in the graphite surface by reducing the overpotential upon the charging process. The feasibility of the TiC nanocrystal-decorated graphite (TiC@AG) anode is thoroughly examined with an in-depth understanding of the interfacial reaction mechanism. Furthermore, the full-cell with a commercial cathode (LiNi0.8Co0.1Mn0.1O2) and TiC@AG anode demonstrates an impressive capacity retention (94.5%) after 300 cycles under fast-charging condition (3 C-charging and 1 C-discharging) without any sign of Li plating. The charging time of the TiC@AG full-cell was estimated at 16.2 min (80% of state of charge), which is substantially shorter than that of the artificial graphite full-cell. Our findings offer practical insights into the design principles of advanced graphite anodes, contributing to the realization of fast-charging LIBs.

3D Pathways Enabling Highly-Efficient Lithium Reservoir for Fast-Charging Batteries.

Enhancing the mobility of lithium-ions (Li+ ) through surface engineering is one of major challenges facing fast-charging lithium-ion batteries (LIBs). In case of demanding charging conditions, the use of a conventional artificial graphite (AG) anode leads to an increase in operating temperature and the formation of lithium dendrites on the anode surface. In this study, a biphasic zeolitic imidazolate framework (ZIF)-AG anode, designed strategically and coated with a mesoporous material, is verified to improve the pathways of Li+ and electrons under a high charging current density. In particular, the graphite surface is treated with a coating of a ZIF-8-derived carbon nanoparticles, which addresses sufficient surface porosity, enabling this material to serve as an electrolyte reservoir and facilitate Li+ intercalation. Moreover, the augmentation in specific surface area proves advantageous in reducing the overpotential for interfacial charge transfer reactions. In practical terms, employing a full-cell with the biphasic ZIF-AG anode results in a shorter charging time and improved cycling performance, demonstrating no evidence of Li plating during 300 cycles under 3.0 C-charging and 1.0 C-discharging. The research endeavors to contribute to the progress of anode materials by enhancing their charging capability, aligning with the increasing requirements of the electric vehicle applications.

Dry-Electrode All-Solid-State Batteries Fortified with a Moisture Absorbent.

For realizing all-solid-state batteries (ASSBs), it is highly desirable to develop a robust solid electrolyte (SE) that has exceptional ionic conductivity and electrochemical stability at room temperature. While argyrodite-type Li6PS5Cl (LPSCl) SE has garnered attention for its relatively high ionic conductivity (∼3.19 × 10-3 S cm-1), it tends to emit hydrogen sulfide (H2S) in the presence of moisture, which can hinder the performance of ASSBs. To address this issue, researchers are exploring approaches that promote structural stability and moisture resistance through elemental doping or substitution. Herein, we suggest using zeolite imidazolate framework-8 as a moisture absorbent in LPSCl without modifying the structure of the SE or the electrode configuration. By incorporating highly ordered porous materials, we demonstrate that ASSBs configured with LPSCl SE display stable cyclability due to effective and long-lasting moisture absorption. This approach not only improves the overall quality of ASSBs but also lays the foundation for developing a moisture-resistant sulfide electrolyte.

Enhanced Cycling Performance of a Li-Excess Li2CuO2 Cathode Additive by Cosubstitution Nanoarchitectonics of Ni and Mn for Lithium-Ion Batteries.

The adoption of Li2CuO2 has drawn interest as a Li-excess cathode additive for compensating irreversible Li+ loss in anodes during cycling, which would move forward high-energy-density lithium-ion batteries (LIBs). Li2CuO2 provides a high irreversible capacity (>200 mAh g-1) in the first cycle and an operating voltage comparable with commercial cathode materials, but its practical use is still restricted by the structural instability and spontaneous oxygen (O2) evolution, resulting in poor overall cycling performance. It is thus crucial to reinforce the structure of Li2CuO2 to make it more reliable as a cathode additive for charge compensation. Pursuing the structural stability of Li2CuO2, herein, we demonstrate cosubstitution by heteroatoms, such as nickel (Ni) and manganese (Mn), for improving the structural stability and electrochemical performance of Li2CuO2. Such an approach effectively enhances the reversibility of Li2CuO2 by suppressing continuous structural degradation and O2 gas evolution during cycling. Our findings provide new conceptual pathways for developing advanced cathode additives for high-energy LIBs.

Flattening of Lithium Plating in Carbonate Electrolytes Enabled by All-In-One Separator.

The uncontrollable dendritic growth of metallic lithium during repeated cycling in carbonate electrolytes is a crucial obstacle hindering the practical use of Li-metal batteries (LMBs). Among numerous approaches proposed to mitigate the intrinsic constraints of Li metal, the design of a functional separator is an attractive approach to effectively suppress the growth of Li dendrites because direct contact with both the Li metal surface and the electrolyte is maintained. Here, a newly designed all-in-one separator containing bifunctional CaCO3 nanoparticles (CPP separator) is proposed to achieve the flattening of Li deposits on the Li electrode. Strong interactions between the highly polar CaCO3 nanoparticles and the polar solvent reduces the ionic radius of the Li+ -solvent complex, thus increasing the Li+ transference number and leading to a reduced concentration overpotential in the electrolyte-filled separator. Furthermore, the integration of CaCO3 nanoparticles into the separator induces the spontaneous formation of mechanically-strong and lithiophilic CaLi2 at the Li/separator interface, which effectively decreases the nucleation overpotential toward Li plating. As a result, the Li deposits exhibit dendrite-free planar morphologies, thus enabling excellent cycling performance in LMBs configured with a high-Ni cathode in a carbonate electrolyte under practical operating conditions.

Bi-Morphological Form of SiO2 on a Separator for Modulating Li-Ion Solvation and Self-Scavenging of Li Dendrites in Li Metal Batteries.

The lithium (Li) metal anode is highly desirable for high-energy density batteries. During prolonged Li plating-stripping, however, dendritic Li formation and growth are probabilistically high, allowing physical contact between the two electrodes, which results in a cell short-circuit. Engineering the separator is a promising and facile way to suppress dendritic growth. When a conventional coating approach is applied, it usually sacrifices the bare separator structure and severely increases the thickness, ultimately decreasing the volumetric density. Herein, we introduce dielectric silicon oxide with the feature of bi-morphological form, i.e., backbone-covered and backbone-anchored, onto the conventional polyethylene separator without any volumetric change. These functionally vary the Li+ transference number and the ionic conductivity so as to modulate Li-ion solvation and self-scavenging of Li dendrites. The proposed separator paves the way to maximizing the full cell performance of Li/NCM622 toward practical application.

REDD1 promotes obesity-induced metabolic dysfunction via atypical NF-κB activation.

Regulated in development and DNA damage response 1 (REDD1) expression is upregulated in response to metabolic imbalance and obesity. However, its role in obesity-associated complications is unclear. Here, we demonstrate that the REDD1-NF-κB axis is crucial for metabolic inflammation and dysregulation. Mice lacking Redd1 in the whole body or adipocytes exhibited restrained diet-induced obesity, inflammation, insulin resistance, and hepatic steatosis. Myeloid Redd1-deficient mice showed similar results, without restrained obesity and hepatic steatosis. Redd1-deficient adipose-derived stem cells lost their potential to differentiate into adipocytes; however, REDD1 overexpression stimulated preadipocyte differentiation and proinflammatory cytokine expression through atypical IKK-independent NF-κB activation by sequestering IκBα from the NF-κB/IκBα complex. REDD1 with mutated Lys219/220Ala, key amino acid residues for IκBα binding, could not stimulate NF-κB activation, adipogenesis, and inflammation in vitro and prevented obesity-related phenotypes in knock-in mice. The REDD1-atypical NF-κB activation axis is a therapeutic target for obesity, meta-inflammation, and metabolic complications.

Nanoarchitectonics of the cathode to improve the reversibility of Li-O2 batteries.

The strategic design of the cathode is a critical feature for high-performance and long-lasting reversibility of an energy storage system. In particular, the round-trip efficiency and cycling performance of nonaqueous lithium-oxygen batteries are governed by minimizing the discharge products, such as Li2O and Li2O2. Recently, a metal-organic framework has been directly pyrolyzed into a carbon frame with controllable pore volume and size. Furthermore, selective metallic catalysts can also be obtained by adjusting metal ions for outstanding electrochemical reactions. In this study, various bimetallic zeolitic imidazolate framework (ZIF)-derived carbons were designed by varying the ratio of Zn to Co ions. Moreover, carbon nanotubes (CNTs) are added to improve the electrical conductivity further, ultimately leading to better electrochemical stability in the cathode. As a result, the optimized bimetallic ZIF-carbon/CNT composite exhibits a high discharge capacity of 16,000 mAh·g-1, with a stable cycling performance of up to 137 cycles. This feature is also beneficial for lowering the overpotential of the cathode during cycling, even at the high current density of 2,000 mA·g-1.

Tailoring the Surface of Natural Graphite with Functional Metal Oxides via Facile Crystallization for Lithium-Ion Batteries.

Graphite is the most popular anode material for lithium-ion batteries (LIBs) owing to its high reversibility and stable cycling performance. With the rapid growth of the global electric vehicle (EV) market, it has become necessary to improve the quick-charge performance of graphite to reduce the charging time of LIBs. Therefore, from a structural viewpoint, it is crucial to control interfacial reactions and stabilize the surface of graphite to improve the sluggish interfacial kinetics. Herein, we propose a facile approach for integrating functional metal oxides on the surface of natural graphite (NG) via a surface-coating technique in combination with a facile-crystallization process. The functionality of the metal oxides, i.e., MoO2 and Fe3O4, on the surface of NG was thoroughly investigated based on various structural and electrochemical analyses. The results demonstrate that the metal oxides play critical roles in stabilizing the surface of NG and facilitating faster Li+ migration at the interface between NG and the electrolyte during cycling. In particular, the full cell configured with the c-Fe3O4-NG anode shows remarkably improved charging behavior (3 C charging-1 C discharging) without any significant loss of reversible capacity during 300 cycles. This study has conclusively established that tailoring the surface of NG with functional metal oxides would be a utilitarian way to improve the charging capability of NG. We are confident that the study results would provide utilitarian insights into the development of advanced LIBs for successful implementation in EV applications in the future.

Comparative Insights into the Skin Beneficial Properties of Probiotic Lactobacillus Isolates of Skin Origin.

In recent times, probiotics have been emerging as one of valuable cosmetic resources. This work was undertaken to evaluate and compare the skin beneficial properties of three Lactobacillus strains, namely, L. plantarum SB202, L. fermentum SB101, and L. paraplantarum SB401, originally isolated from the healthy skins of Koreans. The Lactobacillus isolates were individually grown in MRS broth, and the corresponding cell-free conditioned mediums (CMs), LP202, LF101 and LPP401, were prepared for analyzing diverse cosmetic potentials at a comparative perspective. The superoxide radical and nitrite ion scavenging activities of the CMs were in the orders of LPP401 ≥ LF101 > LP202 and LPP401 > LF101≒LPP202, respectively. They attenuated the lipopolysaccharide-induced reactive oxygen species (ROS) and nitrite ion levels in RAW264.7 murine macrophages both in the order of LPP401 ≥ LF101 > LP202, implying their anti-inflammatory properties. They exhibited antityrosinase activities in the order of LPP401 > LF101 ≥ LP202 and diminished α-melanocyte-stimulating hormone-induced melanin levels in B16F10 melanoma cells in the order of LPP401≒LF101 > LP202, suggesting their skin whitening activities. They enhanced cornfield envelope formation in HaCaT keratinocytes in the order of LPP401 > LF101 > LP202. They inhibited the in vitro hyaluronidase and elastase activities in the orders of LPP401 > LP202 ≥ LF101 and LPP401 ≥ LP202 > LF101, respectively. Their enhancing properties on the synthesis of procollagen type I in normal human dermal fibroblasts were in the order of LF101≒LPP401 > >LP202. The CMs possess various cosmetic characteristics, such as antioxidant, skin whitening, antiaging, barrier improving, and anti-inflammatory activities. LPP401, the CM prepared from L. paraplantarum SB401, has been evaluated to be more desirable cosmetic resource than LP202 and LF101.

2-Methoxyestradiol Inhibits Radiation-Induced Skin Injuries.

Radiation-induced skin injury (RISI) is a main side effect of radiotherapy for cancer patients, with vascular damage being a common pathogenesis of acute and chronic RISI. Despite the severity of RISI, there are few treatments for it that are in clinical use. 2-Methoxyestradiol (2-ME) has been reported to regulate the radiation-induced vascular endothelial-to-mesenchymal transition. Thus, we investigated 2-ME as a potent anti-cancer and hypoxia-inducible factor 1 alpha (HIF-1α) inhibitor drug that prevents RISI by targeting HIF-1α. 2-ME treatment prior to and post irradiation inhibited RISI on the skin of C57/BL6 mice. 2-ME also reduced radiation-induced inflammation, skin thickness, and vascular fibrosis. In particular, post-treatment with 2-ME after irradiation repaired the damaged vessels on the irradiated dermal skin, inhibiting endothelial HIF-1α expression. In addition to the increase in vascular density, post-treatment with 2-ME showed fibrotic changes in residual vessels with SMA+CD31+ on the irradiated skin. Furthermore, 2-ME significantly inhibited fibrotic changes and accumulated DNA damage in irradiated human dermal microvascular endothelial cells. Therefore, we suggest that 2-ME may be a potent therapeutic agent for RISI.

Porous carbon architectures with different dimensionalities for lithium metal storage.

Lithium metal batteries have recently gained tremendous attention owing to their high energy capacity compared to other rechargeable batteries. Nevertheless, lithium (Li) dendritic growth causes low Coulombic efficiency, thermal runaway, and safety issues, all of which hinder the practical application of Li metal as an anodic material. In this review, the failure mechanisms of Li metal anode are described according to its infinite volume changes, unstable solid electrolyte interphase, and Li dendritic growth. The fundamental models that describe the Li deposition and dendritic growth, such as the thermodynamic, electrodeposition kinetics, and internal stress models are summarized. From these considerations, porous carbon-based frameworks have emerged as a promising strategy to resolve these issues. Thus, the main principles of utilizing these materials as a Li metal host are discussed. Finally, we also focus on the recent progress on utilizing one-, two-, and three-dimensional carbon-based frameworks and their composites to highlight the future outlook of these materials.

Surface Stabilization of Ni-Rich Layered Cathode Materials via Surface Engineering with LiTaO3 for Lithium-Ion Batteries.

Recently, Ni-rich layered cathode materials have become the most common material used for lithium-ion batteries. From a structural viewpoint, it is crucial to stabilize the surface structures of such materials, as they are prone to undesirable side reactions and particle cracking in which intergranular microcracks form at the particle surfaces and then propagate inside. As a simplified engineering technique for obtaining Ni-rich cathode materials with high reversibility and long-term cycling stability, we propose a facile surface coating of piezoelectric LiTaO3 onto a Ni-rich cathode material to enhance the charge transfer reaction and surface structural integrity. Based on theoretical and experimental investigation, we demonstrate that this surface protection approach is effective at enhancing the reversibility and mechanical strength of Ni-rich cathode materials, leading to a stable cycle performance at up to 150 cycles, even at 60 °C. Furthermore, the piezoelectric characteristics of the surface LiTaO3 can enhance the rate capability of Ni-rich cathode materials at current densities of up to 2.0C. The results of this study provide a practical insight on the development of Ni-rich cathode materials for practical use in electric vehicle applications.

Radiation-Induced Fibrotic Tumor Microenvironment Regulates Anti-Tumor Immune Response.

High linear energy transfer (LET) radiation, such as neutron radiation, is considered more effective for the treatment of cancer than low LET radiation, such as X-rays. We previously reported that X-ray irradiation induced endothelial-to-mesenchymal transition (EndMT) and profibrotic changes, which contributed to the radioresistance of tumors. However, this effect was attenuated in tumors of endothelial-specific Trp53-knockout mice. Herein, we report that compared to X-ray irradiation, neutron radiation therapy reduced collagen deposition and suppressed EndMT in tumors. In addition to the fewer fibrotic changes, more cluster of differentiation (CD8)-positive cytotoxic T cells were observed in neutron-irradiated regrowing tumors than in X-ray-irradiated tumors. Furthermore, lower programmed death-ligand 1 (PD-L1) expression was noted in the former. Endothelial-specific Trp53 deletion suppressed fibrotic changes within the tumor environment following both X-ray and neutron radiation therapy. In particular, the upregulation in PD-L1 expression after X-ray radiation therapy was significantly dampened. Our findings suggest that compared to low LET radiation therapy, high LET radiation therapy can efficiently suppress profibrotic changes and enhance the anti-tumor immune response, resulting in delayed tumor regrowth.

Strategic Approaches to the Dendritic Growth and Interfacial Reaction of Lithium Metal Anode.

Utilization of lithium (Li) metal anode is highly desirable for achieving high energy density batteries. Even so, the unavoidable features of Li dendritic growth and inactive Li are still the main factors that hinder its practical application. During plating and stripping, the solid electrolyte interphase (SEI) layer can provide passivation, playing an important role in preventing direct contact between the electrolyte and the electrode in Li metal batteries. Because of complexities of the electrolyte chemical and electrochemical reactions, the various formation mechanisms for the SEI are still not well understood. What we do know is that a strategic artificial SEI achieved through additives electrolyte can suppress the Li dendrites. Otherwise, the dendrites keep generating an abundance of irreversible Li, resulting in severe capacity loss, internal short-circuiting, and cell failure. In this minireview, we focus on the phenomenon of dendritic Li-growth and provide a brief overview of SEI formation. We finally provide some clear insights and perspectives toward practical application of Li metal batteries.

REDD1 is a determinant of low-dose metronomic doxorubicin-elicited endothelial cell dysfunction through downregulation of VEGFR-2/3 expression.

Low-dose metronomic chemotherapy (LDMC) inhibits tumor angiogenesis and growth by targeting tumor-associated endothelial cells, but the molecular mechanism has not been fully elucidated. Here, we examined the functional role of regulated in development and DNA damage responses 1 (REDD1), an inhibitor of mammalian target of rapamycin complex 1 (mTORC1), in LDMC-mediated endothelial cell dysfunction. Low-dose doxorubicin (DOX) treatment induced REDD1 expression in cultured vascular and lymphatic endothelial cells and subsequently repressed the mRNA expression of mTORC1-dependent translation of vascular endothelial growth factor receptor (Vegfr)-2/3, resulting in the inhibition of VEGF-mediated angiogenesis and lymphangiogenesis. These regulatory effects of DOX-induced REDD1 expression were additionally confirmed by loss- and gain-of-function studies. Furthermore, LDMC with DOX significantly suppressed tumor angiogenesis, lymphangiogenesis, vascular permeability, growth, and metastasis in B16 melanoma-bearing wild-type but not Redd1-deficient mice. Altogether, our findings indicate that REDD1 is a crucial determinant of LDMC-mediated functional dysregulation of tumor vascular and lymphatic endothelial cells by translational repression of Vegfr-2/3 transcripts, supporting the potential therapeutic properties of REDD1 in highly progressive or metastatic tumors.

Low-dose metronomic doxorubicin inhibits mobilization and differentiation of endothelial progenitor cells through REDD1-mediated VEGFR-2 downregulation.

Low-dose metronomic chemotherapy has been introduced as a less toxic and effective strategy to inhibit tumor angiogenesis, but its anti-angiogenic mechanism on endothelial progenitor cells (EPCs) has not been fully elucidated. Here, we investigated the functional role of regulated in development and DNA damage response 1 (REDD1), an endogenous inhibitor of mTORC1, in low-dose doxorubicin (DOX)-mediated dysregulation of EPC functions. DOX treatment induced REDD1 expression in bone marrow mononuclear cells (BMMNCs) and subsequently reduced mTORC1-dependent translation of endothelial growth factor (VEGF) receptor (Vegfr)-2 mRNA, but not that of the mRNA transcripts for Vegfr-1, epidermal growth factor receptor, and insulin-like growth factor-1 receptor. This selective event was a risk factor for the inhibition of BMMNC differentiation into EPCs and their angiogenic responses to VEGF-A, but was not observed in Redd1-deficient BMMNCs. Low-dose metronomic DOX treatment reduced the mobilization of circulating EPCs in B16 melanoma-bearing wild-type but not Redd1-deficient mice. However, REDD1 overexpression inhibited the differentiation and mobilization of EPCs in both wild-type and Redd1-deficient mice. These data suggest that REDD1 is crucial for metronomic DOX-mediated EPC dysfunction through the translational repression of Vegfr-2 transcript, providing REDD1 as a potential therapeutic target for the inhibition of tumor angiogenesis and tumor progression. [BMB Reports 2021; 54(9): 470-475].

Feasibility of a Spherical Hollow Carbon Framework as a Stable Host Material for Reversible Metallic Li Storage.

A spherical hollow carbon framework decorated with functional heteroatoms is designed and synthesized using ultrasonic spray pyrolysis as a potential anode material for lithium metal batteries (LMBs). The pore structure of the hollow carbon framework can be tailored by melamine, which is a functional additive for integrating abundant nanopores and the uniform decoration of heteroatoms in the structure. The large surface area and pore volume of the hollow carbon framework offer enhanced reversibility and capability for metallic Li storage. In addition, the dendritic growth of Li and volume changes induced by repeated Li plating and stripping can be effectively suppressed during cycling. More importantly, atomic-scale decorations of heteroatoms can effectively lower the overpotential for the nucleation and growth of metallic Li inside the hollow carbon framework. It is mainly responsible for improving the cycle performance and rate capability, even at a high current density. Finally, the hollow carbon framework anode shows stable behavior toward Li plating and stripping without significant capacity fading in the LMBs than conventional Li metal anodes.

Stabilizing Li-metal host anode with LiF-rich solid electrolyte interphase.

The development of lithium (Li)-metal anode is high priority research to initiate next-generation Li batteries. Applying Li-metal in practical applications as anode still has many hurdles to clear away, such as low Coulombic efficiency and capacity degradation by the continuous formation of dead Li. We demonstrate that cobalt (Co) nanoparticle incorporation in a porous carbon host anode can play a critical role in the formation of a thick lithium fluoride dominated solid-electrolyte interphase in ether-based electrolyte. As a result, the host anode containing Co nanoparticles shows excellent electrochemical performance with high Li-metal reversible capacity and even stable long-term cyclability with no dead Li formation.

Solvothermally synthesized anatase TiO2 nanoparticles for photoanodes in dye-sensitized solar cells.

Many researchers working on the development of Dye-sensitized solar cells (DSCs) continue to focus on the synthesis of photoanode materials with high surface area, along with high light scattering ability to enhance light harvesting efficiency (LHE). On the other hand, dye packing density, which can also affect the LHE significantly, is often overlooked. Solvothermally synthesized anatase TiO2 nanoparticles (SANP) were obtained by a new and simple approach using a mixed solvent, ethanol and acetic acid. SANP were applied as a photoanodes material in DSCs using a metal-free organic dye (D149) or organometallic dye (N719) dyes. The dye loading (packing density) was examined in term of the isoelectric point (IEP) and the contribution of this, in addition to light scattering effects were shown to control the devices photovoltaic efficiency of the devices; specifically when compared with ones employing commercially available TiO2 nanoparticles (either transparent or a bilayer structure with a transparent layer and a scattering one). SANP photoanodes sensitized with D149 dye were found to be optimised at 10 µm, yielding photovoltaic conversion efficiencies of 6.9%, superior to for transparent or transparent + scattering films from the commercial source (5.6% and 5.9%, respectively). Further to this, an efficiency of 7.7% PCE was achieved using a SANP photoanode sensitized with N719 dye, with 7.2% seen for the transparent photoanode and 7.9% with a scattering layer. The high efficiencies of devices based on of SANP photoanode are attributed to the high dye loading capability in addition to good light scattering. A further point of interest is that even with the increased reactivity of the surface towards dye adsorption, we did not observe any significant increase in recombination with the redox mediator, presumably due to this increased dye loading providing better shielding.