Interactions of Surfactants with the Bacterial Cell Wall and Inner Membrane: Revealing the Link between Aggregation and Antimicrobial Activity.

Surfactants with their intrinsic ability to solubilize lipid membranes are widely used as antibacterial agents, and their interactions with the bacterial cell envelope are complicated by their differential aggregation tendencies. We present a combined experimental and molecular dynamics investigation to unravel the molecular basis for the superior antimicrobial activity and faster kill kinetics of shorter-chain fatty acid surfactant, laurate, when compared with the longer-chain surfactants studied in contact time assays with live Escherichia coli (E. coli). From all-atom molecular dynamics simulations, translocation events across peptidoglycan were the highest for laurate followed by sodium dodecyl sulfate, myristate, palmitate, oleate, and stearate. The translocation kinetics were positively correlated with the critical micellar concentration, which determined the free monomer surfactant concentration available for translocation across peptidoglycan. Interestingly, aggregates showed a lower propensity to translocate across the peptidoglycan layer and longer translocation times were observed for oleate, thereby revealing an intrinsic sieving property of the bacterial cell wall. Molecular dynamics simulations with surfactant-incorporated bacterial inner membranes revealed the greatest hydrophobic mismatch and membrane thinning in the presence of laurate when compared with the other surfactants. The enhanced antimicrobial efficacy of laurate over oleate was further verified by experiments with giant unilamellar vesicles, and electroporation molecular dynamics simulations revealed greater inner membrane poration tendency in the presence of laurate when compared with the longer-chain surfactants. Our study provides molecular insights into surfactant translocation across peptidoglycan and chain length-induced structural disruption of the inner membrane, which correlate with contact time kill efficacies observed as a function of chain length with E. coli. The insights gained from our study uncover unexplored barrier properties of the bacterial cell envelope to rationalize the development of antimicrobial formulations and therapeutics.

Anisotropic sol-gel transition: the influence of sample thickness, pressure and strain.

We demonstrate an unprecedented influence of sample thickness (d) and pressure (P) on the gelation of a liquid crystalline nematic host. The temperature at which the anisotropic nematic sol transforms into a nematic gel is weakly dependent on 'd' down to its certain value, but surprisingly exhibits a precipitous drop below about 30 µm thickness. Temperature-dependent laser transmission exhibits characteristics of approach to a tricritical point, when d is varied. While the strain dependence of storage and loss moduli exhibit Payne effect/weak strain overshoot, the magnitudes of the moduli and their thermal variation present explicit dependence on d, both behaviours being well described by power-law expressions. Studies at elevated pressures also corroborate the observations of d-dependence with the nematic sol thermal range increasing with P, suggesting reduced favour for network formation. We strongly believe that these experiments pave a new pathway to realize the formation of gel fibres.

Assessing Barriers for Antimicrobial Penetration in Complex Asymmetric Bacterial Membranes: A Case Study with Thymol.

The bacterial cell envelope is a complex multilayered structure evolved to protect bacteria in hostile environments. An understanding of the molecular basis for the interaction and transport of antibacterial therapeutics with the bacterial cell envelope will enable the development of drug molecules to combat bacterial infections and suppress the emergence of drug-resistant strains. Here we report the successful creation of an in vitro supported lipid bilayer (SLB) platform of the outer membrane (OM) of E. coli, an archetypical Gram-negative bacterium, containing the full smooth lipopolysaccharide (S-LPS) architecture of the membrane. Using this platform, we performed fluorescence correlation spectroscopy (FCS) in combination with molecular dynamics (MD) simulations to measure lipid diffusivities and provide molecular insights into the transport of natural antimicrobial agent thymol. Lipid diffusivities measured on symmetric supported lipid bilayers made up of inner membrane lipids show a distinct increase in the presence of thymol as also corroborated by MD simulations. However, lipid diffusivities in the asymmetric OM consisting of only S-LPS are invariant upon exposure to thymol. Increasing the phospholipid content in the LPS-containing outer leaflet improved the penetration toward thymol as reflected in slightly higher relative diffusivity changes in the inner leaflet when compared with the outer leaflet. Free-energy computations reveal the presence of a barrier (∼6 kT) only in the core-saccharide region of the OM for the translocation of thymol while the external O-antigen part is easily traversed. In contrast, thymol spontaneously inserts into the inner membrane. In addition to providing leaflet-resolved penetration barriers in bacterial membranes, we also assess the ability of small molecules to penetrate various membrane components. With rising bacterial resistance, our study opens up the possibility of screening potential antimicrobial drug candidates using these realistic model platforms for Gram-negative bacteria.

Influence of chirality on the thermal and electric properties of the columnar mesophase exhibited by homomeric dipeptides.

We present the first investigation of the influence of chirality on the thermal and electric properties in a biologically important homomeric dipeptide that exhibits a hexagonal columnar liquid crystal mesophase. The peptide employed has two chiral centres, and thus the two possible enantiopures are the (R,R) and (S,S) forms having opposite chirality. The measurements reported the span of the binary phase space between these two enantiopures. Any point in the binary diagram is identified by the enantiomeric excess Xee (the excess content of the R,R enantiopure over its S,S counterpart). We observe that the magnitude of Xee plays a pivotal role in governing the properties as evidenced by X-ray diffraction (XRD), electric polarization (Ps), dielectric relaxation spectroscopy (DRS) measurements, and the isotropic-columnar transition temperature. For example, XRD shows that while other features pointing to a hexagonal columnar phase remain the same, additional short-range ordering, indicating correlated discs within the column, is present for the enantiopures (Xee = ±1) but not for the racemate (Xee = 0). Similarly, an electric-field driven switching whose profile suggests the phase structure to be antiferroelectric is seen over the entire binary space, but the magnitude is dependent on Xee; interestingly the polarization direction is axial, i.e., along the column axis. DRS studies display two dielectric modes over a limited temperature range and one mode (mode 2) connected with the antiferroelectric nature of the columnar structure covering the entire mesophase. The relaxation frequency and the thermal behaviour of mode 2 are strongly influenced by Xee. The most attractive effect of chirality is its influence on the polar order, a measure of which is the magnitude of the axial polarization. This result can be taken to be a direct evidence of the manifestation of molecular recognition and the delicate interplay between chiral perturbations and the magnitude of the polar order, a feature attractive from the viewpoint of devices based on, e.g., remnant polarization-a currently hot topic. To add further dimension to the work, the DRS measurements are also extended to elevated pressures.

Effect of Pressure on Dielectric and Frank Elastic Constants of a Material Exhibiting the Twist Bend Nematic Phase.

We report the first investigation on the effect of applied pressure on the now well-known dimer α,ω bis(4,4'-cyanobiphenyl)heptane (CB7CB) that exhibits two types of nematic: the regular uniaxial nematic (N) and the recently discovered twist-bend nematic (NTB) phase. At atmospheric pressure, the thermal behavior of ε⊥, the permittivity normal to the director in the N phase decreases on entering the NTB wherein the value represents permittivity orthogonal to the helical axis. Application of pressure initially decreases the magnitude of the change in ε⊥ and with further increase in pressure exhibits an increase in the value. Such a change in the feature of ε⊥ is similar to that obtained at room pressure when the monomeric heptyloxy cyanobiphenyl (7OCB) is doped to CB7CB at a high concentration of 50%. The dielectric anisotropy exhibits a trend reversal with temperature, the extent of which is affected at high pressures. Another salient feature of the study is the effect that pressure has on the Frank bend elastic constant K33. Over the pressure range studied K33 enhances by a large factor of 5. In contrast, the splay elastic constant exhibits a much smaller change of only 70%. The pressure-temperature phase boundary has a much smaller slope for the N-NTB transformation than for the isotropic-N transition. We propose that all these features can be understood in terms of the relative population of the more energetic horseshoe and lower energy extended conformer adopted by the CB7CB molecule. The extended conformer is favored at lower temperatures or at higher pressures. This argument is validated by X-ray diffraction experiments at atmospheric pressure on the binary mixture of CB7CB and 7OCB, mentioned above.

Binary System Exhibiting the Nematic to Twist-Bend Nematic Transition: Behavior of Permittivity and Elastic Constants.

We describe measurements of the permittivity and Frank elastic constant in the nematic phase of a binary system displaying a transition between the nematic (N) and the recently discovered twist-bend nematic (NTB) phase. Among the salient features observed are (i) the existence of the NTB phase even when the system is loaded with a high concentration (∼64 mol %) of a rodlike component; (ii) a clear signature in permittivity of the N-NTB transition; and (iii) a lower value of the bend elastic constant compared to the splay over a large phase space, with the difference between the two becoming a maximum for an intermediate mixture. These studies further support the surprising idea that the elastic features associated with bent molecules can be further augmented by suitable rodlike additives.

Viscoelastic behavior of a binary system of strongly polar bent-core and rodlike nematic liquid crystals.

We have investigated the permittivity and viscoelastic behavior of a binary system comprising bent-core and calamitic compounds, both of which are polar, the calamitic being more strongly so, and exhibiting only the nematic mesophase. The permittivity data in the nematic as well as the isotropic phase indicate strong polar interactions between the molecules, even for mixtures with a significant content of the bent-core compound. The thermal dependence of both the splay and bend elastic constants exhibit features different from the literature. The splay constant displays a large increase with increasing concentration of bent-core material, before undergoing a precipitous drop for small calamitic content materials. Upon lowering the temperature, certain mixtures exhibit a convex-shaped feature for the bend elastic constant; that is, the value of the elastic constant is maximum at a specific temperature in the nematic phase, diminishing when the temperature is either increased or decreased. Surprisingly, the pure compounds, especially the bent-core one, show only a monotonically increasing trend for the bend elastic constant. We present two arguments to explain these features: one of these is based on coupling between the molecular shape and director distortion presented in the literature. Then we put forth a new concept of frustration in the packing between the two types of molecules and the polar interactions as an alternative.